• Servicing experience on Marine and Offshore deck equipment.
• Intensive knowledge on hydraulic system troubleshooting.
• Hydraulic system modification.
• Knowledge on Low pressure system service and troubleshooting.
• Min knowledge on electical control system and fault finding.
• Service / Troublshoot / Repairing knowledge on marine and offshore cranes and winches.
• Communication / Report writting skills.
• Overseas travel on short notice.
• Attending ship repair meeting / apply permit / Preparation of shipyard entery documents.
• As a team leader.
• Participate in vessel dockings repair work at shipyards.
• Adhoc duties as assigned

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job Summary:

• Seeking a Senior Marine Engineer with 8-15 years in marine engineering and automation.
• Expertise required in electrical control systems, automation design, and vessel performance optimization.
• Responsibilities include project management, technical troubleshooting, and cross-functional collaboration to meet timelines and project scope.

Key Responsibilities:

• Lead installation, testing, and commissioning of marine automation and electrical control systems.
• Design and optimize electrical schematics, PLC/HMI programming, and control panel design using AutoCAD.
• Oversee vessel performance monitoring and implement operational efficiency strategies.
• Conduct inspections, case studies, and system testing for data accuracy and system functionality.
• Ensure compliance with IMO, SOLAS, and STCW safety protocols.
• Liaise with clients and stakeholders for smooth project execution and issue resolution.
• Prepare and present progress reports documenting each project phase.
• Supervise technical teams, troubleshoot electrical systems, and ensure minimal downtime.
• Manage project documentation including schematics, termination drawings, and progress reports.
• Monitor compliance with industry standards, safety, and regulatory requirements.

Qualifications:

• Degree/Diploma in Marine Engineering or a related field.
• Certifications in AutoCAD, Industrial Automation, CompEx
• Proficiency in AutoCAD, Electrical CAD, PLC programming, and industrial communication protocols (e.g., Modbus, Ethernet).
• Strong project management skills and ability to manage multiple projects.
• Familiarity with MS Projects, CRM systems, and Gantt charts preferred.

Skills & Competencies:

• Marine Engineering & Automation: Expertise in shipboard automation, electrical systems design, and vessel performance optimization.
• Project Management: Proficient in planning, executing, and closing projects; skilled with project management tools.
• Technical Leadership: Capable of leading technical teams and stakeholders to meet timelines and budget.
• Data Acquisition & System Integration: Experienced in optimizing data acquisition and integrating control systems.
• Safety Compliance: Knowledge of maritime safety standards and regulatory compliance.
• Problem-Solving: Effective in troubleshooting and resolving complex technical issues

About Us:
Surbana Jurong Aviation is a premier aviation consultancy firm known for its expertise in aviation-built environment consulting services. With a dedicated team of professionals, we deliver high-quality aviation buildings, facilities, and infrastructure for clients worldwide. We seek a Junior Aviation Engineer/Planner to join our dynamic team.

Job Summary:
As a Junior Aviation Engineer/Planner, you will be vital in designing airport-related buildings, facilities, and infrastructure. The ideal candidate will have a background in civil engineering, proficiency with BIM, AutoCAD, and AviPLAN, and can create precise technical drawings for airside infrastructure and engineering works in airports.

Key Responsibilities:

• Develop and update drawings using AutoCAD.
• Design airfield geometry and markings using AviPLAN.
• Collaborate with planners, engineers, architects, and other professionals to ensure designs meet all project requirements.
• Prepare technical drawings, sketches, diagrams, and specifications.

Qualifications:

• Diploma or bachelor’s degree in civil engineering or related field, or equivalent experience in C&S CAD/BIM design and drawing production.
• Proficiency in AutoCAD; experience with Civil 3D, Revit and AviPLAN is a plus.
• Strong understanding of civil engineering principles, construction methods, and materials.
• Exceptional attention to detail and accuracy in design work.
• Ability to read and interpret technical drawings and specifications.
• Strong organizational skills, with the ability to handle multiple projects simultaneously.
• Excellent problem-solving, analytical, and communication skills.
• Team-oriented with a strong ability to work independently.
• Willingness to travel as required.

Job Level & compensation offered may vary depending on candidates’ experiences and competencies.

Responsibilities:

• Perform laboratory testing in clinical chemistry and immunoassays.
• Determine the acceptability of samples with guidelines and prepare specimens for analysis.
• Validate the accuracy of laboratory data.
• Evaluate the test results accurately in accordance with procedures.
• Operate instruments to perform testing in accordance with established written procedures.
• Perform experiments, as scheduled, for evaluation of new reagents. Maintain quality control of laboratory testing to ensure accurate and timely lab reporting. Document corrective and preventative actions with good documentation practices.
• Assist in the servicing and maintenance of laboratory equipment according to manufacturer and SOP requirements.
• Comply with regulatory guidelines and Standard Operating Procedures (SOPs).

Requirements:

• Bachelor’s degree in a biomedical or biological science from an accredited college or university.
• Minimum 2 years of working experience in a clinical laboratory will be preferred.
• Good analytical skills with attention to details.
• Able to work independently as well as a good team player with initiative and adaptive to changes
• Good planning and organizing skills.
• Good communication and interpersonal skills.
• Sunday and Public holiday duties occasionally required.

Essential Job Duties:

Specific department duties as set forth in the task list and department Training Checklists including but not limited to:

• Ensure that specimens are picked up from the appropriate department, sorted, pre-scanned and registered into the appropriate temperature bins in a timely fashion
• Identification of problem samples and corrects routing of these specimens.
• Close and prepare SDS shipments.
• Accountable for accurately identifying specimens that need to be discarded and completing the discard process.
• Creation of new storage drawers for use in registration process and the ability to completed location moves in the SMART database
• Consolidate and move drawers as specified to effectively utilize freezer space.
• Perform basic freezer maintenance including but not limited to:Acts as a backup to the freezer coordinator.
  Monitor, respond to and resolve issues with sample storage units in the department, to ensure regulatory compliance and monitor follow-up for corrective actions.
  Accountable for completing documentation in the process
  
• Understand the pull list and retrieve the specimens from the storage units
• Understand and apply the shipping instructions and pack the specimens as per requirements.
• Generation and application of specialized labels, to include mini labels and/or computer generated barcodes
• Perform any QC needed during the process of pulling and packaging
• Must be able to QC shipments shipped through SMART
• QC packages and shipping documents
• Stock supplies from warehouse
• Ship packages through SMART
• Ship pass-through and Transfer Test packages to other Covance locations
• Generate and download Electronic Packing Lists (EPLs) from MSART
• Generate emails and insert EPLs
• Be able to accurately and efficiently Pre-scan, Register, Process, Pull and Pack specimens using SMART
• Completion of beginning and end of day duties, as assigned
• Adhere to all company policies and procedures and perform all departmental and interdepartmental SOP’s as written
• Generate an appropriate audit trail of all activities and maintains own training file and required documentation
• Other duties as assigned

Requirements:

• Diploma or Bachelor’s degree / advanced degree in applicable discipline
• Minimum 1 year of applicable working experience
• Able to work in a team as well as independently
• Dynamic attitude and ability to work under pressure
• Ability to take up challenges
• Strong detail orientation
• Strong communication and organizational skills
• Ability to use several software packages i.e. Word, Excel, Access

Responsibilities/Duties

• In this role you will be responsible for managing clinical projects to ensure the successful delivery of all lab services, including kits shipment, sample testing and sample management of a clinical study for the Asia region
• Act as regional liaison between Labcorp Central Lab Services (CLS) Global Study Manager and various CLS departments involved in the clinical protocol
• Close collaboration with the Global Study Manager for all study related aspects that are pertaining to the Asia platforms and through all study stages, from set-up to closure
• Review the study Statement of Work, a document that specifies the scope of services CLS will perform for a clinical protocol and contains information approved by the sponsor and necessary to define the protocol specific database, to ensure regional feasibility and make appropriate recommendations to the Study Design Lead
• Ensure a detailed knowledge of the Statement of Work specifications and very good understanding of how they impact every lab services aspect of the clinical trial
• Manage day-to-day regional study related activities, including responding and resolving challenges in logistics, lab tests resulting, monitoring and study supplies, keeping the Global Study Manager informed of any study development
• Monitor, track and provide resolution to all local study issues, keeping the Global Study Manager in the communication loop
• Responsible for implementing monitoring and setting up of local performance metrics and taking corrective actions when needed.
• Liaise with the Global Study Manager for any tasks assigned to the Regional Study Coordinator as part of the Global Monitoring Plan
• Demonstrate ability to work in a matrix environment where task assignments can be channeled down to be completed by Regional Study Coordinators while other task assignments will need to be delegated to other functional groups; demonstrate flexibility in handling both categories of tasks
• Participate in functional meetings, learning forum and provide input, keeping processes up to date
• Support a culture of continuous improvement, quality and productivity
• Support CLS Global Project Management strategy and deliver outstanding customer satisfaction and performance

Qualification:

• Bachelor Degree in relevant fields.
• Relevant professional / internship experience in clinical research or pharmaceutical industry will be an advantage
• Ability to use computer and office software applications (e.g. Microsoft Word, Excel, MS-Access and Outlook)
• Strong interpersonal skills
• Influence and negotiation skills
• Demonstrated ability to plan and prioritize.
• Demonstrated communication and organizational skills.
• Demonstrated attention to detail.
• Proven ability to excel in a fast paced environment
• Proven teamwork
• Proven experience and knowledge of processes and tools used in department
• Demonstrated ability to liaise with internal departments
• Demonstrated ability to facilitate meetings
• Demonstrated participation in process improvement initiatives
• Liaising with China counterparts is expected, proficiency of Chinese is essential

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

Duties & Responsibilities:

· Manage equipment to monitor instrumentation systems

· Responsible for instrumentation installation and network establishment

· Monitor work progress and preparation of necessary reports

· Liaise and coordinate with contractors, clients and co-workers to ensure smooth completion

· To troubleshoot, repair and resolve technical issues pertaining to electrical/ network

· Attend meetings when required

· Any other duties as assigned

Requirements:

· Degree/ Diploma in Civil Engineering or equivalent

· Min. 1 year of experience

· IT/ Software background is an advantageous

· Keen interest in geotechnical instrumentation and relevant experience will be advantageous

· Able to work independently and as a team

· Good communication and interpersonal skills

Design /drafting of various Electrical layouts and schematics using solid work electrical software as directed by PD/AE and/or as per the requirement of the assigned job.

· 3D modeling of electrical components, equipment and other related items as per the requirement of project.

· Provide the technical support to site Engineer.

· Creating Draft of Electrical Single Line / Panel Diagram according to customer technical specification.

· Maintain, update and rectify drawings as needed and ensure its accuracy and completeness.

· Respond promptly to inquiries and requests relating to the drawings.

· Helps PD/AE in resolving interferences/clash reports.

Requirements:

· Diploma in Electrical Engineering or equivalent.

· Good working knowledge of mechanical/electrical aspect of generator system and control panels.

· Experience in internal/ Client model review.

· Working experience of drawing software like solidworks electrical and draftsight.

· Able to read and understand site layout drawings and general arrangement drawing of genset.

· Fresh graduates are welcome to apply.

** 0830am -1800pm

** 5-day work weekly

** Two ways of shuttle bus service provided at Jurong East MRT

Only for PR and Singaporean.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR department. We regret that only suitable candidate will be notified.

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

Job Description

> Performing electrical engineering work in analysis, design, development, running simulations, prototyping hardware, evaluation, planning, testing and operations;

> working with the end customer and/or systems engineers to gather requirements and convert them to engineering specifications;

> trouble shooting and repair the system hardware and software during real-time collection operations.

> On site electrical research, construction audits, field reviews

> Writing detailed and concise technical reports, feasibility studies, proposals, including written responses and instructions as required during all project phases

> Conducting all tasks in cooperation with internal clients and other engineering disciplines

> Managing and enhancing client relationships

> Maintain proper project documentation of the electrical work performed Job

> Other assigned tasks as requested

Job Requirements

> Minimum Diploma/ Degree in Electrical Engineering/Electronics/Automation Control or equivalent

> Responsible and committed.

> Good problem solving and troubleshooting knowledge using systematic approach

> Knowledge of AutoCAD software or electrical equivalent will be an advantage

> Ability to design electrical circuit and perform electrical calculations

> Knowledge and experience on wiring will be an advantage

>Self-motivated, highly resourceful and organized

Working hour: 8:30am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Scope

· Designing, manufacturing, and installing components that fulfil requirements.

· Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement) （Preferably IN MARINE&OFFSHORE&MANUFACTURING INDUSTRY）

· Analyzing problems or deficiencies and developing solutions to resolve them.

· Conducting experiments and evaluations to improve and innovate product designs.

· Creating plans and designs using CAD technology.

· Evaluates final product’s overall performance, reliability and safety.

· Estimating budgets and time scopes for each project.

· Writing technical documentation for machine operators.

· Ensuring that products meet compliance regulations.

· Collaborating with project managers and other engineers in our team.

· Liaison with vendors on finalization of modules.

· Responsible for mechanical documentation.

Requirement

· Degree in Mechanical / Mechatronics Engineering or related disciplines with 3years’ experience.

· Diploma in Mechanical / Mechatronics Engineering or related disciplines with 5 years’ experience.

Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Job Description

• Configure and manage critical systems, including Active Directory (AD), telephony, video conferencing, access points (AP), firewalls, VPNs, and more. Monitor and analyse the performance of LANs, WANs, and wireless networks to ensure optimal functionality.
• Configure laptops and desktops for new and existing staff, perform system backups, and handle disaster recovery (DR) as needed. Ensure all automatic system backups are in place.
• Apply system patches after hours to maintain system stability and security. Perform routine system checks to ensure continuous operations.
• Work with third-party support vendors to resolve technical issues. Participate in IT auditing and documentation to ensure compliance with company policies.
• Provide IT support for approximately 200 users, managing user accounts and roles within the ERP system. Troubleshoot login issues, assist with basic system navigation, and resolve minor technical problems.
• Monitor ERP system performance, address minor issues, apply updates, and generate routine reports for departments like finance, HR, and inventory. Customize reports based on user requirements.
• Maintain documentation for common IT processes, user guidelines, and troubleshooting procedures. Optionally, assist with creating and launching new business processes within the company.
• Perform routine backups, monitor system security, and follow compliance protocols under the guidance of the IT team.

Requirements

• Diploma or Degree in IT/Computer Science.
• Possess CCNA / Microsoft certification.
• Proven experience in providing technical support in a corporate IT environment.
• Experience with Veeam and Microsoft 365 administration.
• Familiarity with leading wireless vendors’ products (Cisco/Meraki, Aruba/HPE, Ruckus) is advantageous.
• Knowledge of virtualization technologies such as Hyper-V and VMware is a plus.
• Strong communication and administrative skills.
• Ability to manage multiple tasks and prioritize in a fast-paced environment.

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

1.Attend vessel performs inspections,calibration, testing and troubleshooting on electrical & automation systems

2. Service/overhauling automation/electrical equipments in workshop

3.Good communication with shipcrew and superintendent

4.Good communication with shipyard

5.Prepare reports after finished the service job

Responsibilities:-

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Duties & Responsibilities:

• Study drawings for the projects and understanding requirements
• Determine operation requirements and preparing schedule
• Liaise with internal/external parties for the execution of works
• Ensure timely delivery of projects according to schedule
• Updating of project records for reporting purposes and submission of reports
• Attend site meetings and resolve technical/operational issues independently
• Undertake ad-hoc duties related to project execution
• Any other ad-hoc duties assigned

Requirements:

• Diploma/ Degree in Civil Engineering or any equivalent
• Min. 2 years of experience
• Able to work independently and as a team
• Good communication and interpersonal skills

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer (NodeJS and/or Golang)

Internal Code: A24012

What will you do?

• We develop the Smart Nation infrastructure and applications and facilitate collaboration with citizens and businesses to co-develop technologies.
• Join us as we support Singapore's vision of building a Smart Nation - a nation of possibilities empowered through info-communications technology and related engineering.
• Our objective is to catapult our government infrastructure into the new digital era with faster time to market, operational agility, automated deployment and scalability.
• We are an agile development and operations house that is bold, agile and collaborative. The team is responsible for designing, prototyping, building and operating different products and services.
• As a Software Engineer (BackEnd), you will help to level up the team's competency with your valuable past experiences.
• Experiences of failure are just as important as those of success.
• You will drive, implement, deploy, maintain and operate products or key components of your products.
• You will work closely with different teams to deliver the best possible and impactful Solutions.
• If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join us.
• Make a difference by taking up the key role and be part of the passionate and inspirational team.
• Ownership over feature design and implementation, with a focus on sound technical choices and maintainability. At times, this would be in collaboration with other software engineers.

What are we looking for?

• 3-5 years of relevant experience
• Proficient in at least one programming language, such as JavaScript/TypeScript, Golang, Java, Python, or C++
• Candidates with Nodejs or Golang experience are preferred
• Familiar with common Internet technologies, including but not limited to backend, database, MQ, caching, microservice architectures and/or cloud infrastructure.
• Contribute in technical discussions and solutioning sessions.
• Possess good coding and documentation habits, pay attention to code style, familiar with basic design patterns and principles, and continuously focus and optimize projects
• Autonomy to drive the direction of the product
• Chance to work on creating developer tooling systems from the ground up, from research all the way to implementation.
• Chance to work with different development teams while enabling them to be more productive at the same time
• Excellent teamwork and communication skills; communicating technically complex ideas to non-technical people effectively is a plus
• Having a growth mindset and willing to share knowledge to grow together with the team
• Enjoy making data driven decisions
• Understand that problems can be solved in different ways, sometimes not with engineering; understand how these solutions can and should be evaluated.
• Willing to learn and own fullstack
• Experience in frontend technologies (HTML, CSS and JS/TS) as well as any web framework (React, Angular, Vue)
• Experience in backend JavaScript (Node.js)/TypeScript or other backend frameworks
• Experience with automated testing
• Experience with deployments cloud infrastructure such as AWS, Azure, or Google Cloud

Would be a plus if you have:

• Experience in frontend technologies (HTML, CSS and JS/TS) as well as any web framework (React, Angular, Vue)
• Experience in backend JavaScript (Node.js)/TypeScript or other backend frameworks
• Experience with automated testing
• Experience with deployments cloud infrastructure such as AWS, Azure, or Google Cloud
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Role Overview

We are seeking an experienced PT - Special Education Teacher who can seamlessly integrate into our team and make an immediate impact. Reporting to the Team Leader for Education, the candidate will teach children with learning difficulties, manage behavioral and academic challenges, and deliver quality education aligned with our philosophy and guidelines.

Key Responsibilities

1. Program Implementation:

• Deliver programs in alignment with the organization’s philosophy and established guidelines.

2. Student Assessment:

• Conduct periodic assessments to monitor and ensure students’ progress aligns with agreed objectives.

3. Professional Standards:

• Execute tasks professionally and adhere to stated guidelines.

4. Feedback and Collaboration:

• Provide timely feedback to the Director for Education and parents on challenges and progress during lessons.

• Collaborate with management to improve work processes.

5. Teaching Material Preparation:

• Develop teaching materials tailored to each student’s goals.

• Document teaching methods and track achievement of goals after each lesson.

6. Individualized Education Plans (IEPs):

• Design and implement personalized education plans for each student.

7. Documentation and Records Management:

• Maintain comprehensive documentation and filing of all student-related materials.

8. Research and Development:

• Contribute to the research and improvement of teaching methods.

Technical Skills & Competencies

1. Teaching & Behavior Management:

• Demonstrate expertise in executing teaching and behavioral management strategies for children with learning difficulties.

2. Parent Communication & Problem-Solving:

• Engage effectively with parents to address their concerns and collaborate on solutions to support the child’s development.

3. Application of Psychological Theories:

• Apply psychological theories to practical teaching scenarios.

Qualifications & Experience

• Minimum Experience: At least 2 years in Special Education.

• Candidates without prior experience, including fresh graduates and A-level students, may apply for the 6-month competency traineeship program before transitioning to a full-time role.

If you are passionate about making a difference in the lives of children with learning difficulties and can contribute immediately to our mission, we encourage you to apply.

Responsibilities:

- Manage day-to-day operational requirements

- Support and manage after hours event coverage

- Plan and optimise the use of resources (scheduling of technicians, vehicles, spareparts etc)

- Supervise and monitor staff performance

- Schedule staff weekend duty

- Schedule inhouse production work

- Manage warehouse

- Back up IT team support (Offsite and Onsite): Technical hardware and driver support

- Administer and execute contracts

Requirements

- Diploma in IT or related fields

- IT knowledge required (have experience building a PC from scratch)

- At least 3 years experience in photocopier or related industry

- Possess a valid Class 3 licence and above.

- Good interpersonal and communication skills

- Leadership qualities

Nanyang Technological University’s ANT Group – NTU Joint Lab is a collaboration between ANT International and NTU. The partnership will explore privacy-preserving methods for large language models (LLMs) and will be overseen by a joint research committee.

We are looking for a Research Engineer II to involved in research and development collaboration with industry, on AI Safety and Trust Technology, especially on the topic of applying fully homomorphic encryption in privacy-preserving machine learning. The successful applicant is expected to be familiar with fully homomorphic encryption and its applications in AI models.

Key Responsibilities:

• Research and development of trust technologies such as privacy-preserving machine learning which are important components of digital trust platforms.
• Be involved in privacy-preserving machine learning and fully homomorphic encryption system development and implementation.
• Assist in preparation of reports and scientific papers.

Job Requirements:

• Master’s degree in computer science, mathematics, information theory or related field
• Participation in privacy, security, and trust related conferences and journals
• Good programming skill, preferably with experience in implementing cryptographic algorithms.
• Be familiar with the following programming languages: C/C++
• Good communication skill, self-motivated, and could deliver under tight schedule

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24121

What will you do?

• Build prototypes to demonstrate technology opportunities
• Design system architectures
• Write production quality code
• Manage deployments to cloud and (occasionally) on-premise infrastructure
• Learn and share knowledge in a multi-disciplinary team

What are we looking for?

• Experience with modern web applications in JavaScript (ES 5/6) is a must-have
• Experience in creation/maintenance of APIs using Node.js is highly advantageous
• Experience in front-end development with React.js is highly advantageous
• Experience in automated testing using JavaScript testing frameworks/libraries such as Karma, Mocha, Chai and Sinon is highly advantageous.
• Experience with database management/usage (both relational and non-relational), and handling of data in different environments is highly advantageous.
• Experience in feature testing using a Selenium-based framework is a nice bonus.
• Experience in tooling processes for modern web applications using Webpack and Gulp is a nice bonus.
• Experience in using Docker containers, development of CI/CD pipelines, and deployment using cloud services such as AWS/PasSes/your own private servers is a nice bonus.
• Experience in the software development lifecycle in an Agile context is a plus point.
• Experience in Scrum is a plus point.
• Passion for creating products
• Keen sense of learning and self discovery
• Willingness and capability to impart knowledge
• High level of self awareness
• Ability to self manage
• Growth mindset
• Minimum 2 years experience (or equivalent level of skill/confidence) with modern web applications using JavaScript.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.