Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities

• To be the liaison for the coordination of M&E works to ensure works are carried out as per schedule and local authorities’ quality standard.
• To supervise and ensure that work done are in accordance with the required drawings and specifications as per the contract.
• To monitor closely and report promptly work progress to superior.
• Coordinate and prepare technical submissions with sub-contractors and suppliers to ensure timely work arrangements.
• Manage project documentation and maintain accurate records.
• Ensure compliance with all health and safety regulations.

Qualifications

• Diploma in Civil Engineering/Building Construction/Mechanical Engineering or any equivalent qualification or relevant on-the-job experience are welcome.
• More than 3-years of work experience in the Construction sector would be preferred.
• Good team player and able to work independently.
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Menicon is a contact lens specialist embracing precision craftsmanship to see life in detail. Join our family in Singapore, the first manufacturing facility outside Japan for daily disposable contact lens and a base for developing technologies and products with advanced, value-added features.

Be part of our journey toward digitalization, where you’ll play a key role in advancing automated systems and smart technologies to enhance efficiency. Join a team that leverages innovation to transform manufacturing processes and deliver exceptional quality.

Key Responsibilities:

• Provide control system support, to improve efficiency and reliability of manufacturing equipment and processes.
• Collaborate closely with mechanical, validation, and process engineers to optimize equipment & processes including data analysis for problem resolution.
• Initiate and spearhead software improvement projects on control systems and manage testing, validation and implementation
• Engage in cross-functional team projects aimed at machine and process improvements, embodying teamwork, responsibility, and a capacity for independent work.
• Lead training sessions to enhance the technical skills of operational and technical teams, ensuring smooth transfer and operation of automated equipment.

Minimum Requirements:

• Degree in Engineering or related field.
• 3 years work experience in designing control systems for manufacturing equipment
• Competent in SCADA and PLC programming
• Knowledge in C# will be an added advantage

Beng Hui Marine Electrical Pte Ltd (a subsidiary of BH Global Corporation Ltd) is looking for someone who is motivated and leads by example and is willing to drive sales through proactiveness and hard work. We always believe in rewarding results.

Responsibilities

• Sales Generation: Contribute to the team revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Customer Relationship Management: Maintain strong relationships with existing and potential customers by providing prompt and accurate information, addressing queries and concerns, and ensuring customer satisfaction.
• Proposal and Quotation Preparation: Create sales proposals and quotations, ensuring accuracy, and timely delivery to customers.
• Market Research: Conduct research on market trends, competitors, and customer needs to identify potential sales opportunities and develop effective sales strategies.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events, and customer demonstrations to promote products and services.
• Administrative Tasks: Perform various administrative tasks, including maintaining sales records, preparing sales documentation, managing calendars, and coordinating meetings and appointments.

Requirements

• Diploma or Certifications in Marine / Engineering or relevant fields.
• Candidate with experience in the marine or similar industry is preferred.
• Industry Technical Knowledge: Understanding of the marine or similar industry, including knowledge of similar products, services, market trends, and customer needs.
• Communication Skills: Good verbal and written communication skills, with the ability to effectively interact with customers, colleagues, and stakeholders at all levels.
• Organization and Attention to Detail: Good organizational skills, attention to detail, and the ability to multitask in a fast-paced environment.
• Problem-Solving Abilities: Good analytical and problem-solving skills to identify and address customer issues and sales challenges effectively.
• Team Player: Ability to work collaboratively with cross-functional teams and contribute to a positive and cooperative work environment.
• Adaptability: Flexibility to adapt to changing priorities and handle multiple tasks with tight deadlines.
• Professionalism: Demonstrated professionalism, integrity, and a customer-focused approach in all interactions.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.

Responsibilities:

• Assist the Business Development Manager and/or Management to support business unit growth and profit objectives, driving demand for select area of business
• Ensure to meet business unit objectives, sales goals and client retention goals; increase brand recognition; and enhances market position
• Manage PSC marketing efforts including marketing materials, website, social media, tradeshows and events
• Develop a thorough knowledge of products and services, business models, operations, competition, and the industry
• Develop and maintain technical sales expertise, stay updated on all trend and development related to product portfolio
• Track sales progress and support forecast efforts
• Identify business opportunities by identifying prospects and evaluating their position in the industry; researching and analysing sales options
• Support Sales staff in key account management through sales cycle in the preparation of quotations, proposals, service contracts, purchase orders, deliveries and manage customer payments
• Establish pricing strategy to improve on product sales and for new business opportunities
• Support local sales process in tender specification, configuration, product presentation and demonstration, trial, user training and support for onsite service coordination
• Manage customer satisfaction
• Follow up on submitted information by telephone or email
• Be committed to independence, neutrality and impartiality in dealing with colleagues, customers and supplier; safeguarding the confidentiality of customers and suppliers, will not disclose confidential information to third parties unless prior agreement has been provided

Requirements:

• Diploma or Degree in Chemical Engineering, Chemistry, Business Management or Marketing or equivalent. Preferably with experience in Services / Product Marketing
• Excellent Microsoft Office skills specifically Word and Excel
• Excellent administration skills
• Business-to-business marketing experience
• Excellent written and spoken English communication skills
• Good eye for detail
• Team player

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

JOB DESCRIPTION

· Understanding of the customer requirements and developing technical solutions for customers.

· Strong collaboration with several stockholders including customer, sales and marketing, RD team.

· Support customers during the all development cycle from design specification until mass production.

· Exposure to schematics and PCB layout design review.

· Direct contact with customers implies excellent communication skills.

JOB REQUIREMENTS

· Bachelor’s degree or above in Electronic Engineering or related majors

· Min 3-5 years of relevant work experience in semiconductor

. Must has outstanding hardware and RF bring-up experience for WLAN + BT combo, as well as best expertise of OFDM/OFDMA, MIMO, RF component knowledge and front-end matching.

. Proficient with multiple tools for board design, such as OrCAD, Allegro, impedance calculation, ADS simulation and other RF/digital simulation on board level.

. Strong communication and interpersonal skills to handle whole board design process, debug critical issue, optimize RF matching, decent documentation technique.

· Familiar with Litepoint IQxel tester, R&S CMW tester, spectrum analyzer, signal generator, network analyzer, power meter, attenuator, and other WLAN/BT test equipment is an advantage.

· Strong customer management and problem-solving skills

· Good communication and team working skills

· Singaporeans are welcome to apply

This is a fantastic opportunity for an experienced Account Development Associate Director/Director who has prior experience generating new revenue from existing clients. Taking direct accountability for at least 2 major global clients, the Account Development Associate Director/Director combines an excellent knowledge of the FMCG industry and a deep understanding of NIQ products and services. You will be responsible for aligning key customer priorities and insights with NIQ’s capabilities, identifying and converting opportunities to deepen commercial relationships and drive additional revenue.

You will develop and maintain effective relationships with individuals and teams both internally and with the clients, to provide best-in-class NIQ/client commercial partnerships.

We are looking for someone ready to drive positive change, able to challenge wider business processes, and be fully driven by achieving success with the support of the wider industry team.

You will need to engage at all levels and work successfully across a matrixed organization structure, fully leveraging the service model.

Responsibilities

• Individual seller responsible for accelerating organic growth whilst delivering on revenue plans
• Own the commercial relationship with your clients, develop Joint Business Plans and a strong understanding of your clients’ business strategy, objectives and growth opportunities
• Devise a strategic approach with agile and flexible solutions that deliver value to our clients in a profitable way
• Deliver revenue plans by negotiating the renewal of contracts and continuous services with clients
• Identify sales opportunities for NIQ services and solutions to help the client achieve their strategic objectives
• Own and deliver on global contractual commitments with clients
• Build and maintain strong networking and C-suite engagement with key players in the clients’ business, and lead discussions with a wide range of decision influencers and budget owners
• Partner and develop effective relationships with Market Sales Leaders, Customer Success and relevant teams in the region to enable them to achieve their targets
• Represent and advocate for the NIQ brand through external events to unlock opportunities among clients

Main Responsibilities:

• Infrastructure Management: Administer servers, storage systems, hypervisors, and network equipment such as switches, firewalls and wireless access points.
• Network Administration: Manage network infrastructure, including routing protocols, DNS, Active Directory, and GPO. To also maintain current VPN connectivity.
• Technical Support: Provide Tier-2/Tier-3 in-person or remote support for escalated issues and troubleshoot hardware, software, and network incidents.
• Collaboration Tools & AV Support: Ensure smooth operation of Microsoft Teams, video conferencing, and meeting equipment.
• User Training: Conduct training and knowledge transfer for end-users on deployed systems, focusing on Microsoft 365 services.
• Peripheral Management: Oversee IP phones, printers, display TVs, CCTV systems, and door access, collaborating with vendors as needed.
• Cybersecurity: Support basic cybersecurity measures and compliance with IT policies.
• Project Support: Participate and/or take ownership in IT upgrades, deployments, and other technical initiatives.

Job requirements:

• Bachelor's Degree in IT / Computer Science / relevant field or higher, certifications in CCNA, VMware VCP, or Microsoft Certified: Azure Administrator is a plus.
• At least 5 years in IT infrastructure, with hands-on expertise in network protocols, virtualization practices, and Microsoft 365 administration and configuration.
• Proficiency in Active Directory, DNS, GPO, SQL Server, and backup solutions (e.g., Druva). Knowledgeable in networking topologies, protocols and methodologies and cybersecurity concepts will be an advantage.
• Excellent Problem-solving skills, good communication skills and fluent in common language, and teamwork ability.

The Air Traffic Management Research Institute (ATMRI) was jointly established by the Civil Aviation Authority of Singapore (CAAS) and Nanyang Technological University (NTU) in 2013. As a renowned research institute, ATMRI focuses on finding innovative solutions to advance air traffic management (ATM) and catalyze the transformation of ATM systems in the region. The institute is at the forefront of research, integrating advanced AI, data analytics, and human-centered approaches to enable next-generation ATM systems.

We are seeking a motivated and independent Research Associate to join our team and drive innovative research in air traffic management.

Key Responsibilities:

• Assists in the development of the air traffic management tools to maintain situational awareness, decision-making efficiency, and smooth coordination when operating under the multi-sector planner operational concept.
• Implementation of back-end algorithms into a user interface suitable for validation exercise at technology readiness level 4.
• Facilitating communication and collaboration among experts from diverse backgrounds to integrate knowledge.
• Conducting original research, publishing in leading journals and conferences, mentoring junior researchers, and facilitating collaborations with industry and academic partners.

Job Requirements:

• A Master’s degree in aerospace engineering, operations research, or a related field;
• Research experience/Domain knowledge in ATM is highly advantageous.
• Strong research contributions, evidenced by publications in SCI Q1 journals and peer-reviewed conferences.
• Proficiency in programming (Python, C++, MATLAB).
• Excellent English communication and writing skills - for research purposes
• Capable of managing multiple tasks effectively, both independently and as part of a collaborative team.

Join us to contribute to cutting-edge research and help shape the future of air traffic management!

We regret that only shortlisted candidates will be notified.

This is a fantastic opportunity for an experienced commercial Account Development Senior Manager who has prior experience of generating new revenue from existing clients. Taking direct accountability for a cluster of global clients, the Account Development SM combines an excellent knowledge of the FMCG industry and a deep understanding of NielsenIQ products and services. You will be responsible for aligning key customer priorities and insights with NielsenIQ’s capabilities, identifying and converting opportunities to deepen commercial relationships and drive additional revenue.

You will develop and maintain effective relationships with individuals and teams both internally and with the clients, to provide best-in-class NielsenIQ/client commercial partnerships.

We are looking for someone ready to drive positive change, able to challenge wider business processes, and be fully driven by achieving success with the support of the wider industry team.

You will need to engage at all levels and work successfully across a matrixed organization structure, fully leveraging the service model.

Responsibilities

• Individual seller responsible for accelerating organic growth whilst delivering on revenue plans
• Own the commercial relationship with your clients, develop Joint Business Plans and a strong understanding of your clients’ business strategy, objectives and growth opportunities
• Devise a strategic approach with agile and flexible solutions that deliver value to our clients in a profitable way
• Deliver revenue plans by negotiating the renewal of contracts and continuous services with clients
• Identify sales opportunities for NielsenIQ services and solutions to help the client achieve their strategic objectives
• Own and deliver on global contractual commitments with clients
• Build and maintain strong networking and C-suite engagement with key players in the clients’ business, and lead discussions with a wide range of decision influencers and budget owners.
• Partner closely with customer success team to help deliver relevant insights/ thought leadership using NielsenIQ proprietary tools to key clients stakeholders and help drive overall NIQ sales through this engagement
• Partner and develop effective relationships with Market Sales Leaders, Customer Success and relevant teams in the region to enable them to achieve their targets

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

JOB DESCRIPTION

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Senior Manager (Process Development) in Singapore.

Senior Manager (Process Development)

What you will do

The successful candidate will apply subject matter expertise to support technology transfer and ongoing cGMP production of commercial protein biologics processes. Scope of work could include:

• Lead site PD activities for continuous improvement, productivity improvement, and product life cycle management.

• Lead and manage PD safety and compliance initiatives including inspection readiness.

• Manage and oversee PD related projects, ensuring they are completed on time, within scope, and budget. Analyze project outcomes to identify areas for improvement and drive continuous optimization.

• Represent PD on key projects or business processes.Stay abreast of industry trends and leverage expertise to ensure the success of the Amgen Singapore Site, focusing on reliability, efficiency, agility, and differentiation.

• Collaborate with cross-functional teams and network drug substance teams for process alignment by applying advanced technical principles and concepts.

• Site PD champion for digital literacy and new digital tools deployment for process monitoring, tech transfer, and facility modeling. Apply best practices to leverage data for more proactive and predictive approaches.

• Support regulatory filings, audits and inspections, and other CMC activities.

Win

What we expect of you

Basic Qualifications

· Doctorate Degree and 2 years of biologics process development or commercial-scale technical support experience Or

· Master’s Degree and 6 years of biologics process development or commercial-scale technical support experience Or

· Bachelor’s Degree and 8 years of biologics process development or commercial-scale technical support experience

Preferred Qualifications

· 6+ years in a technical role supporting manufacturing processes or 8+ years as a project manager for cross-functional teams within regulated environments (i.e., cGMP)

· Strong oral and verbal communication skills, interact effectively with diverse internal and external (suppliers) stakeholders.

· Knowledgeable in regulatory filings authoring and inspections. Experienced in biopharma product end to end lifecycle management (e.g product team lead).

· Familiarity in MoF single use facility operational aspects of commercial biopharma manufacturing and proficient in big data analysis.

· Working experience with capital / engineering project from early stage to project turnover.

· Stakeholder Communication: Maintain clear and effective communication with all project stakeholders in multicultural working environment, including providing regular updates and managing expectations.

· Agility and Learning: Promote a culture of agility and learning within project teams, encouraging innovation and adaptability in a dynamic business environment.

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

Job Responsibilities:

• Supervise new erections, additions, and alterations (A&A) to existing buildings, including earth retaining and stabilizing systems, as well as specialist designs for demolition works.
• Plan and implement the project,ensuring all construction activities on-site align with the master and detailed work programs.
• Work independently and as an integral member of the Site Management team.
• Prepare, plan, and submit project-related documents such as schedules, method statements, design plans, risk assessments, monthly reports, etc.
• Supervise the execution of construction works to ensure compliance with contract specifications, construction drawings, the company’s quality standards, Environmental, Safety & Health (ESH) practices, and other contract documents.
• Coordinate and liaise with the client’s representatives, relevant authorities, consultants, subcontractors, suppliers, etc., to address both technical and non-technical issues and document resolutions.
• Plan and coordinate site works while resolving drawing details and discrepancies.
• Identify potential and existing problems impacting the work schedule, offering solutions to the relevant team/department.
• Liaise with clients or consultants for site inspections and technical report submissions, ensuring all necessary records are maintained on-site.
• Assist the Contracts Department (QS) in verifying progress payments and claims from contractors.
• Attend regular meetings with clients’ representatives, consultants, and contractors to ensure project progress is on schedule.
• Establish and maintain an effective document control system, conducting reviews of detailed design drawings, project documents, and specifications.

Job Requirements:

• A minimum of a Degree in Civil Engineering, Architecture, or an equivalent field.
• At least 10 years of project or site management experience, particularly in Demolition projects.
• A driven individual with the ability to work independently and lead site management activities effectively.
• Familiarity with wiresaw cutter and waterjet cutter methods for demolition is a must.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

About the role

To run R&D, product development activities and projects related to aerogel such as paints and fire resistant coatings, boards, blankets and other innovation solutions for commercial thermal insulation applications for various industries such as Oil and Gas, Built and Environment, Marine and Offshore and Electric Vehicles. As a core member, it has a pivotal role in shaping the technology, developing the core products together and defining the vision of the company.

Locations: 8 Cleantech Loop, #08-37 Singapore 637145 .CleanTech 3

Working Days: 5 days a week

Time: 9 - 6 pm

Basic Salary ranges from $4500 to $7000 (Depending on qualifications and experience).

Other benefits include transport allowance and basic medical coverage, annual leave, paternity/maternity and compassionate leave.

Roles & Responsibilities

• Establish R&D procedures and work processes.
• Manage laboratory day-to-day operations including lab organization, laboratory facilities, and safety protocols.
• Stay up to date with scientific literature/patent, brainstorm new ideas with founders and contribute to the intellectual property of the company.
• Development of new and/or improved product formulation to meet customers requirements.
• Work closely with business team and customers/industry partner for pilot trials, implement their feedback and improve existing product to achieve customer specification.
• Development of a suitable manufacturing process for the product formulation.
• Production of sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches
• Work closely with process engineers to validate manufacturing methods for production scale batches.
• Train production personnel on manufacturing processes.
• Source and evaluate new raw materials for formulation improvement to roll out new variants.
• Monitors the progress of stability study for R&D samples.
• Develop technical specifications, datasheets for commercial and R&D products.
• Trouble-shooting in the areas of formulation and process for routine production.
• Provides documentation to support registration of products with regulatory authority.
• To ensure the quality of product is in accordance with the specification.
• To ensure that products are produced, stored according to the appropriate documentation and monitor storage conditions for materials and products in order to obtain or maintain the required quality.
• To implement quality control framework for commercial products such as COA and COC.
• To ensure that company is always updated with the regulatory requirements.
• To establish and maintain Good Manufacturing Practices for all R&D and commercial projects.
• Mentor and manage junior staff.
• Prepare progress update and presentations
• To ensure all GMP quality related record are kept properly

Requirements

• A minimum of bachelors degree in chemical engineering, chemistry, materials science/engineering, manufacturing engineering, or a related field.
• A minimum of 5 years' experience with track record in formulating / developing new coating products with commercial release.
• Experience working with various types of solvent free, water based and solvent-based coatings /paint chemistry is advantageous.
• Leadership abilities, problem solving skills and a good communicator
• Experience in paint additive chemistry
• Project Management expertise
• Experience in industrial coating performance standards such as ISO, ASTM., etc.
• Ability to drive innovation and creativity in a team setting
• Experience in nanotechnology or surface coatings is a plus
• Ambitious, confident, curious and decisive amidst ambiguity and uncertainty

To Apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Lead Materials Engineer (R&D)’ in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, residential status in Singapore, details of your educational background and work experience.

Description

· Technical & Helpdesk Support, IT/Computer - Hardware, IT/Computer Network/System/Database Admin, IT/Computer - Hardware

· Installation and configuration of office broadband, firewalls, servers, routers, and workstations, as well as office relocation

· Server and Storage Consolidation, Data Protection and Retention

· Virtualization and Cloud Computing Solutions. Inventory control of laptops and licenses and maintain serial numbers.

· To initiate approval and asset write-offs for IT equipment.

· Monitoring, assigning, and purchase requisition laptops and licenses.

· Evaluate the various PCs and laptops' performance and support levels, and make any required recommendations for future purchases.

· Assist with technical and help desk issues.

· Setup a Virtual Private Network (VPN).

· End-user support (Remote Access, Teamviewer support)

· Conduct an internal compliance audit on a regular basis to prevent illegal software and program downloads.

· Coordination of IT Compliance and Audits

· Review and improve company IT Policy

· Drive Security Awareness

· Keep laptops in good working order for troubleshooting, security, and other purposes.

· Responsible for cybersecurity of our system

Requirement:

· Bachelor Degree in Computer Science and /or with IT-related discipline in relevant professional certifications.

· Minimum of three years' experience working in an IT security-related capacity, with a thorough awareness of cybersecurity frameworks and standards.

· Automation Champion. Network Supervision.

· Citizens of Singapore are encouraged to apply

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Source, coordinate & execute the development of new products and concepts.
• Provide support to various functions to get the necessary information to support the Product Development process and requirement.
• Be highly Involved in product testing and methodology setup
• Responsible for product performance analysis and product documentation; Product Specs, Process Control Plan, etc
• Keep track on product development activities within the scope and account for the product development status.
• Liaise with test laboratory on testing of products
• Build relationships with various stakeholders and provide necessary support to other functions.
• Liaise with suppliers on new product requirement when there is new product development assigned
• Attend overseas trade fairs when required.
• Provide support to department’s activities

Requirements:

• Good computer skills, especially in MS Office
• Meticulous and organized personality
• Good attitude and willingness to learn
• Good team player
• Able to start immediately is preferred.