The roles is primarily responsible for maintaining the plant automation system, ensuring latest program & software backups are archived & readily available for all Programmable Electronic Systems (PLCs, HMIs, SCADA, VFDs etc), Calibrations are done in time, any changes to automation systems are approved and tracked through change control process , critical automations spare parts are available, automation maintenance & calibrations are carried out with in allocated budget & also supporting the automation Design, development , implementation & validation of new automation systems including digital factory & digital asset security initiative.

Responsibilities:

• Support BIS, Operations and Maintenance groups throughout the organization as an escalation point for technical issues and advice related to plant automation, instrumentation & control systems.
• Support any projects / capex involving automation by directing and monitoring vendor activities including design, development and testing; evaluate vendor documents including System Design Specifications.
• Maintain operational as-built and operating documentation for plant control system infrastructure.
• Manage contracts and vendors related to plant automation support.
• Ensure automation systems comply with regulatory guidelines. Maintain the validated status of production equipment and associated control systems, in accordance GMP requirements
• Leads projects, when assigned, including developing conceptual design, scope of work, project schedules, and status reports. When appropriate, conducts project design review and/or status meetings for sponsoring departments and management.
• Develop a detailed understanding of Plant Automation systems including Rockwell Allen Bradley PLCs (Compact Logix, Control Logix, etc.) , Panel View, Wonderware ArchestrA & Intouch, Wonderware Historian, SQL database, EtherNet/IP , FTAC, Power Flex VFDs & any other control systems installed at site.
• Provide necessary training to Engineers and Technicians as required.
• Ensure latest backups and crash recovery procedures are updated and tested to recover any Programmable Electronic System (PLCs, HMIs , SCADA, VFDs, Controllers etc) in case of a crash / failure.
• Maintain the as built plant automation system architecture, list of all automation assets (PLCs, HMIs, VFDs) & passwords.
• Through the change control process ensure that changes carried out on the Automation Systems do not compromise the safety, environmental or quality stance of the plant.
• Review Validation documentation (FAT, IQ/OQ etc.). Assist with qualification and validation activities as required.
• Manage the site Calibration Program as per Global Calibration standard guidelines. Ensure that calibration master list is aligned with all stake holders, kept updated for any new projects and calibrations completed in time
• Work closely with the Global Automation Manager to deliver compliance with Global Automation Standards including asset inventory and life cycle management of OT assets.
• Other Ad Hoc duties

Pre-requisites:

• Engineering degree or equivalent with minimum 5 years of industrial automation experience preferably in operations / manufacturing environment, with proven track record of delivery of high impact technology solutions & managing manufacturing automation systems.
• Experience with Allen-Bradley (Rockwell) ControlLogix PLCs , PanelView HMI & Powerflex VFDs ; Wonderware InTouch , Historian & Archestra would be preferred.
• In depth knowledge of Ethernet and other network based I/O systems preferred.
• Knowledge of machine safety requirements & ATEX preferred.
• Demonstrated success in project management and leadership of cross-functional teams.
• Experience of working with SAP for Calibrations and spares management would be a plus.
• Strong written and verbal communication and computer skills required.
• Demonstrated history of positive interpersonal skills showing courtesy, tact, and understanding in interactions with co-workers.
• Ability to work on own initiative, self-motivated.
• Sound communication and stake holder management skills.

We regret that only shortlisted candidate will be notified.

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

· Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.

· Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation. To be the main operator of robotics on site for the projects.

· Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.

· Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.

· Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts when necessary.

· Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.

· Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.

· Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

· Report daily progress of each project.

Requirements

· Bachelor’s Degree in Engineering under Robotics, Computer Engineering, Electrical or Electronics Engineering

· Open-minded individual who seeks mutual growth with the company

· Self-motivated and proactive personality

· Reliable individual who can work with integrity and good interpersonal relationship

We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

· Work with SoC Integration and SoC Timing on power structure optimization

· Work on UPF development to support different stages of implementation flow and SoC verification

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct power structure check at different implementation stages.

· Support back-end implementation on power structure and optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in UPF development and power check.

· Good understanding of Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Senior/ Mechanical Design Engineer

• Basic $3500-$5000 + AWS + VB
• Mon - Fri @ 8.30am-5.30pm
• Location: Ang Mo Kio

Responsibilities

1. Design standardization.
2. Costing and project management.
3. Conceptualize and design machines and modules.
4. Implement design for manufacturing (DFM), design for assembly (DFA), and Concurrent engineering principles.
5. Design pneumatic/hydraulic circuits.
6. Create detailed fabrication drawings, assembly drawings, and layout drawings.
7. Select and size standard components available off the shelf.
8. Undertake new product development or participate in sustaining engineering/Continuous Improvement Programs (CIPs).

Requirements

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:
• Ultra High Precision machine design
• High Speed Pick and Place mechanism design
• Structural, kinematics and dynamic analysis and FEA simulation
• Geometrical tolerance and dimensional analysis (e.g. stack up error)
• Engineering material selection
• Design troubleshooting
• Application of analysis tools like FMEA, DOE3-4

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Kam Shwu Min | EA Personnel No.: R22111811

• Lead Food Safety risk assessment and quality records (QRs) for escalation on lines as per Global GMP lifecycle policy.
• Provides support and inputs to update Food Safety Policy and site HACCP.
• Provide support to the Manufacturing organization to facilitate the efficient operations within the production area.
• To optimize existing processes and to ensure that production goals are met. Ensures systems and processes to maintain GMP at workplace.
• Collaborate with Operations sub-functions in tracking critical production and cleaning parameters to track and collate responses for consumers/medical/affiliates escalations.
• Monitors performance of equipment, machines and tools and corrects equipment problems or process parameters that can produce non-conforming products.

Major Responsibilities:

• Responsible to Manage and focus directly on GMP food safety engineering/food security and validation, in preparation for the commercial production of regulated products.
• Lead projects of facilities and equipment and optimization of existing manufacturing processes to deliver products with the production requirements consistent with Gold Standard Policies.
• Responsible to perform quality events investigation and coming up with CAPA action. Ensuring the effectiveness of CAPA action.
• Responsible to Motivate, develop and train employees for the facility and from third party as part of food safety program.
• Lead incident reviews to investigate and correct microbiological non-conformities and provide recommendation regarding process design, product disposition and continuous improvement.
• Optimize the documentation for quality systems, cleaning and validation, SOPs, HACCP plans, and food safety policy and protocols.
• Ensures plant Food Safety documentation is maintained in an audit-ready state, meeting all statutory, regulatory requirements & customer expectations.
• Ensures the effective use of materials, equipment, and personnel in producing quality products at an effective operating cost.
• Responsible for compliance with applicable Corporate and Divisional Policies and Procedures.
• Prepares reports, publishes, and makes presentations to communicate findings.
• Partner with Engineering on the installation, modification, upgrade and maintenance of manufacturing equipment.
• Implement, document, and maintain controlled, repeatable production processes.
• Development of qualification and validation protocols.
• Participate in and/or lead qualification and validation activities.
• Interface with other departments and suppliers to address root causes.
• Understands the business needs of the company and has knowledge of the customer needs of our business.
• Cultivates internal and external network of resources to complete tasks.
• Any other duties as assigned by supervisor.

Skills/ Experience Requirements:

• 1 to 2 years of related experience.
• Knowledge in SAP system/POMS/MES.
• Knowledge about food microbiology, pathogens and food safety.
• Able to make fast decision and react efficiently to situation.
• Understands engineering principles, theories concepts, practices and techniques

Education:

• Bachelor’s degree in Process Engineering/ Mechanical/ Electrical/ Food Science
• Biotechnology/Microbiology or in related discipline or with a minimum 1-2 years of related experience.

Responsibilities:

• Support and implement Proof-Of-Concept 5G trial use-cases
• Formulate Test Instructions and procedures for the Trials and user acceptance
• Provide recommendation to customer on the use of 5GC features for Trial
• Provide technical assessment on the change request and validating the solutions
• Coordinate with cross-functional team to troubleshoot network issue

Requirements:

• Degree in Communications/Telecommunications Engineering
• Minimum 5 years working experience in telecommunications industry
• Familiar with IP Networking; Layer 3 and Layer 2 routing protocols, BGP/MPLS, 3GPP protocols in the Packet Core domain
• Familiar with 5GC architecture and Core Network Functions
• Hands on experience in EPC and/or 5GC Network will be an advantage
• Familiar in Network Function Virtualization (NFV)
• End to end call flow analysis to identify failure with data analytical tools or Network Tracing
• 1-year contract, renewable

The role of a Site Engineer’s responsibilities include managing different parts of current and ongoing projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. You should be able to work alongside various professionals and create work schedules that meet deadlines.

To be successful as a site engineer, you should demonstrate strong analytical and logical thinking skills. Outstanding candidates should display a superb work ethic and thrive under pressure.

Your Role

• Organizing materials and ensuring sites are safe, clean, and proper execution of work procedure on site.
• Perform site servicing, preventive maintenance, and troubleshooting of water treatment equipment
• Gathering data, compile reports, and delivering them to relevant stakeholders
• Provide regular site progress updates to the Operations Engineer
• To plan, coordinate, and deliver with both internal and external stakeholders
• Participate in engineering development of current and future projects
• Be involved in all phases of equipment implementation, including on-site testing, installation, and commissioning of water treatment equipment
• Strictly adhere to the safety practices in the workplace at all times
• Ad hoc duties as assigned by the management

Your Capabilities and Credentials

• Experienced in all aspects of project deployment including testing, start-up, and commissioning of industrial machinery
• Knowledge of risk management and safety regulations
• A good listener and team player who can problem solve independently in a fast-paced environment.
• Basic computer skills (MS Office)
• Preferably experience in Water Treatment in the Construction industry (Especially in Earth Control Measure, Water Treatment) – Power System

Education and Experience

• Electrical / Electronic or Mechanical Engineering Degree / Diploma required.
• 3+ years’ experience as a maintenance or commissioning engineer (electrical background)
• Experience in decision making, identifying, assessing, evaluating, and solving complex problems
• Preferably with a valid driver’s license of class 3.

Responsibilities:

• Assists in preparing the Work Plan.
• Delegates jobs to supervisors and plan the manpower required for the jobs in accordance to the budgeted man-hours.
• Resolves problems encountered and manage the coordination between the different trades
• Raises or approve Issue Passes for materials and equipment required for the jobs accordingly
• Monitors the work of sub-contractors to ensure that quality and workmanship conform to company standards.
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements.

Requirements:

• A degree from a recognized tertiary institute.
• At least 2 years of relevant working experience.
• Possess positive and willing to learn attitude.
• Good analytical and problem-solving skills.
• Possess good interpersonal and communication skills.
• Able to multi-task and able to work in a fast-paced environment.

Our Address and work hours

Seatrium Limited - Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon-Fri: 7.30am – 4.30pm/ 6.30pm

Seatrium Limited - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon-Thu: 7.30am – 5.15pm

Fri: 7.30am – 4.15pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

JFE Engineering Corporation has a long history of financial strength, award-winning building quality, and unwavering commitment to client satisfaction in Chemical Plant Construction. We are seeking Piping Supervisors with similar values, who can put his or her expertise to work on the New Petrochemical Project Construction site in PCS, Ayer Merbau, Jurong Island. This professional will be responsible for overseeing multiple projects at once and serving as the representative at each worksite in dealings with subcontractors, suppliers, customers, and government inspectors. He or she is to comply with all federal and state procedures, regulations, and codes, and present progress updates to appropriate management channels regularly. With each project, this individual is counted on to drive the innovation for which we are known.

Objectives of this Role

· Manage and oversee work sites for both new construction and refurbished plant projects, coordinating site activities and assuring that all disciplines directly involved in the project are in phase with the project goals and objectives.

· Design and manage the project with an eye on safety, scheduling, and budget.

· Review the design drawings and documents issued by HQ engineers.

· Prepare pre-commissioning procedures for instruments, control valves, and the other instruments/systems, and plan the site test (loop test, operational test, continuity test, etc.)

· Witness and Check the result of the site test conducted by the sub-contractor

· Review and coordinate the sub-contractors design with HQ engineers.

· Coordinate between HQ engineers and others working on the project.

· Responsible for coordinating and supervising Instrumentation work, including coordination with the Owner and the other CSB work, Piping work, Mechanical Installation work, Electrical work, etc.

· Adhere to legal regulations, applicable codes, and other requirements.

· Prepare and manage estimates, budgets, timetables, and resources.

· Proactively identify, mitigate, and track recurring construction issues.

Daily and Monthly Responsibilities

· Collaborate with Clients, engineers, and specialists, hire full-time and part-time subcontractors, labourers, and coordinate their schedules.

· Attend coordination and progress meetings; make regular trips to sites during construction including bid walks, preconstruction walks, in-progress site visits, punch walks, and construction closeouts.

· Conduct and document quality assurance and safety inspections throughout the construction process, assuring the working environment is maintained at acceptable levels, and tools and equipment are in good working condition.

· Respond to work delays, emergencies, and other project disruptions.

Skills and Qualifications

· Bachelor’s or master’s degree in engineering or related field.

· 5+ years’ experience in the management of new construction and remodelling projects.

· Knowledge of construction methods and technologies, and ability to interpret technical drawings and contracts.

· Knowledge of code and standards for petrochemical process plant and scheduling methods.

· Knowledge of Singapore safety regulations and regular practices required.

Preferred Qualifications

· Fluent or solid working knowledge of Japanese (To maintain excellent communication with Japanese clients).

· Working knowledge of green building practices.

· Project management experience with emphasis on direct supervision.

The Job: -

• To operate assigned units of HDPE plant to produce on-specification products to meet production goals according to plant operations procedures.
• To operate the sophisticated computer control system, process logical control, etc. to optimize plant operation.
• Interprets laboratory results, taking corrective actions according to the plant operating manuals, coordinatewith other departments on plant sampling for laboratory analyses, and Materials Handling on product transfer.
• Oversees Permit-To-Work System at various work stages (Gas-freeing / planning / coordination / preparation / execution) of process equipment and issues clearance certificates (work permits) for maintenance work in accordance with established procedures.
• To work on rotating shift (2 cycle).
• Able to handle load up of approximately 25kg if needed.
• Able to work from heights.

Qualification/Experience: -

• Diploma / NTC 2 in Chemical Process Technology or equivalent
• GCE “O” level, preferable with credits in English, Science (Physics or Chemistry) and Mathematics
• Experience in petrochemicals process manufacturing facility is an added advantage.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification, and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and the US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus and our people's experience in delivering consistent quality results for our clients over the past 20 years have been key to our success to date.

We are currently looking for a QA Ops Engineer to join us in a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

1. Guarantee compliance with the systems and procedures of Change Control management.

2. Build expertise in the QA Change Control process and associated tools, facilitating training for change users when necessary.

3. Assess Change Control requests for impacts on process, validation, regulations, and products.

4. Manage the review and approval process of change requests to ensure timely implementation.

5. Ensure that all site changes align with the global change control board's expectations (if applicable) and adhere to site project timelines.

6. Actively participate in cross-functional and cross-site change management forums.

7. Collaborate with departments to streamline and enhance the execution of change control activities, providing support to stakeholders throughout the process.

8. Verify the completion of necessary change control actions before removing lot disposition restrictions.

9. Contribute to the development and delivery of training materials and qualifications related to Change Control processes and Change Management applications.

10. Conduct reviews of Change Records to support Annual Product Review activities.

11. Maintain and continually improve change control systems and processes.

12. Provide support for regulatory inspections, including assistance with audits, presentations, and reviewing documentation related to facilities, utilities, and equipment

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation, or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification, and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and the US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus and our people's experience in delivering consistent quality results for our clients over the past 20 years have been key to our success to date.

We are currently looking for a Commissioning Engineer to join us in a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

Adhere to safety requirements and procedures in the capacity of a System/Package Owner

Conduct thorough walk-downs on systems in collaboration with the construction team, identifying and addressing issues to facilitate a smooth transition from construction to commissioning.

Lead a team of engineers, technicians, and mechanical fitters, ensuring the timely completion of commissioning protocols and activities ahead of schedule, contributing to prompt project delivery and operational readiness.

Foster close collaboration with vendors, overseeing their integration and ensuring effective communication and cooperation between vendor teams and in-house contractors.

Formulate and execute comprehensive commissioning plans, coordinating activities and resources to achieve project milestones efficiently.

Supervise protocol execution, troubleshooting, and issue resolution to uphold the project's objectives and minimize disruptions.

Collaborated closely with cross-functional teams, including process, engineering, automation, and quality assurance, to ensure the seamless integration of commissioning activities.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation, or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

*** Business Development Executive ***

** Passion in Striving for sales **

* Passion in doing sales *

- All who are hard working and passion in doing sales are welcome

- Developing new clientele

- Maintaning good relationship with new and existing clients

- Assisting in job posting and job matching

- Arranging interview appointments

- Training will be provided

- Work from home is optional

- Attractive commission payout

Interested candidates please contact:

Kesmond Yow

Mobile: 97438394

Reg. No.: R1550395

Kylice Recruitment Pte. Ltd.

EA License: 19C9585

Overall Purpose of Role:

Liaise with Managers and VP on hull planning and work preparation for live projects covering: -

• Build Strategy
• Block Sequence
• Space Management for hull construction
• Smooth information and material flow for production.
• Target Sheet for individual hull section
• Embarkation Plan with respect to block construction
• Progress and Budget’s Monitoring
• Monthly Reporting

Responsibilities:

• Distribute Target Sheets to individual hull section
• Monitor the production work progress to ensure it meets the schedule deadlines
• Advise the management of any change to the progress of work, cost implication and schedule impact, as soon as possible and backed up with comprehensive documentation
• Prepare and update daily, weekly, and monthly progress reports
• Presentations to division and senior management on project planning, progress updates, manpower planning, etc
• Improve and maintain quality in Production Planning, Scheduling and Monitoring
• Recommend changes to work method/ process by reviewing the workflow and work process for improvement and to achieve the operational effectiveness and functionality
• Identify, troubleshoot recurring problems, and perform root cause analysis study to take effective corrective and preventive measures

Requirements:

• Degree in any engineering discipline related to Marine & Offshore (Shipbuilding)
• At least 4-5 years of relevant experience
• Knowledgeable in shipbuilding, especially for hull construction
• Good knowledge and exposure of shipbuilding methods and construction
• Able to read and understand Production fabrication drawing
• Planning and Project Management skills
• Experience in 2D/3D software
• Proficiency in Microsoft office especially in Excel
• Knowledge of other applications of project planning softwares such as Primavera P6 is an advantage, not a must
• Ability to focus under pressure and meet deadlines
• Strong analytical, critical, and logical thinking skills
• Strong multitasking abilities
• Possess adaptability to work on-site in construction environment
• Able to work onboard vessels and at heights

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

1. Support ASMI’s Sustainability & Innovation Committee (SIC)

· Promote adoption of innovation, decarbonisation and renewables within the marine sector

· Facilitate transformation of the marine sector towards a low emissions future economy

· Manage meetings of the SIC

2. Advance Marine Decarbonisation

· Administer the Marine Decarbonisation Champions (MDC) Programme

· Organise MDC collateral activities

· Engage external stakeholders including government agencies towards programme objectives

3. Organise the Marine and Offshore (M&O) Symposium

· Coordinate and manage the annual industry thought leadership event

· Showcase innovative efforts and initiatives in the marine sector

· Engage ASMI members and other external stakeholders towards symposium objectives

4. Any other initiatives relating to industry development

REQUIREMENTS

· At least a Polytechnic diploma in any discipline with at least 2 – 3 years relevant experience; engineering and marine related disciplines preferred

· Interest in innovation, decarbonisation and renewables in the marine industry

· Meticulous and detail-oriented

· Good communication (written/verbal) and interpersonal skills

· Resourceful and able to work independently or in teams

· Self-motivated individual with strong drive for results within tight timelines

· Singaporeans and PRs only

SALARY EXPECATIONS

Between S$3,000 to S$4,000

13th Month Guaranteed

Performance Bonus in April every year.

We are looking for a Lead Developer proficient in TypeScript to join a team developing large scale public-fronting applications.

• 5 days work week (Mon - Fri).
• Attractive remuneration package.
• Hybrid work arrangement.

Responsibilities:

• Lead and mentor a team of software engineers, fostering a culture of excellence, innovation, and collaboration.
• Actively participate in all aspects of the software development process (Both front-end and back-end).
• Work closely with stakeholders throughout the software development life cycle.
• Adopting proven software engineering practices like pair programming, code reviews, test-driven.
• Drive technical decision-making processes, advocating for best practices, code quality, and scalability

Requirements:

• Min 5 years experience.
• Experience with Typescript and frameworks such as React.js, Node.js, Nest.js.
• Experience of leveraging on cloud platforms such as Amazon AWS.
• Proficient in unit testing using JUnit, Jest, Mocha and other testing frameworks.
• Experience in solution/system design and architecture.

Interested candidates may apply via email to [email protected] (indicating Job ID J43442 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Benefits:

• Salary: Up to $6000++ (with Commission)
• 5 Working days: Monday to Friday: 8:30am to 6pm (Flexi start and end time)
• Convenient Location: Jurong East (less than 10 minutes from MRT)
• Incentive Trip
• Senior level positions are available

Job Responsibilities:

• Identify and develop client/new business relationships
• Manage both cold and warm leads in expanding business opportunities.
• Work with talent acquisition team to find suitable candidate profiles.
• Keep abreast of employment trends and industry developments.

Additional requirements:

• Strong passion for recruitment and sales driven are welcome to apply!
• This role is a fantastic prospect for someone who loves the thrill of the sale, establishing clients and candidates' relationships

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Why Join Us!

• Project Performance Bonus
• Medical Benefit
• Competitive Salary Package
• E50 winner for 5 years running
• Supportive Team and conducive working environment.
• Upskilling Sponsorship Training
• Transport pickup from Tuas Crescent

Job Responsibilities

• To carry out electrical / instrumentation related detailed design and preparation of drawing.
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram, design of electrical systems.
• To carry out electrical/instrumentation calculation for the design.
• Responsible for reviewing of electrical/instrumentation documents and specification from clients and consultants.
• To check and review all electrical/instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office.
• To co-ordinate with engineers of other disciplines within the department.
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree in Electrical Engineering
• Minimum 5 years’ experience in Construction Management and/or Design of Electrical Systems.
• Proficient in Design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and local electrical codes and standards.
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantage
• Experience in Oil and Gas or Power Plant projects specializing in Engineering- Electrical / Instrument work.

Job:

• To operate assigned units of HDPE plant to produce on-specification products to meet production goals according to plant operations procedures
• To operate the sophisticated computer control system, process logical control, etc. to optimize plant operation
• To work on rotating shift (2 cycle)
• Able to handle load up of approximately 25kg if needed
• Able to work from heights

Qualification/Experience:

• Diploma / NTC 2 in Chemical Process Technology or equivalent
• GCE “O” level, preferable with credits in English, Science (Physics or Chemistry) and Mathematics
• Experience in petrochemicals process manufacturing facility is an added advantage.

Assembly & Test (A&T) Engineer

Responsibilities:

• To create process control router for all machining and Assembly & Test (A&T) process associates with WI products
• To create, setup and manage Bill of Material (BOM) on WI products & Rental orders
• To provide technical advices to Sale, Quality and Supply Chain team regarding to WI products
• To support A&T team on daily technical operational issues and troubleshooting
• To communicate with UK Design Engineering Team for product design and technical related issues
• Always look for opportunities of improvement to complete CI project with DMAIC knowledge.
• Other duties as assigned from time-to-time such as item codes creation, technical reports, etc.

Person Specification

Knowledge & Skills:

• Able to read and interpret engineering drawings. (essential)
• Able to use CAD (2D/3D) software like AutoCAD, Solidworks, etc. (essential)
• Experience in hand-on Assembly and Test operation for Oil and Gas products (essential)
• Experience in using ERP system. (essential)
• Experience in creating routing and BOM for manufacturing process (A&T, machining, torque- up, coating). (essential)
• Microsoft Office (Word, Excel, and Power Point). (essential)
• Knowledge in Well intervention products and the applications (desirable)
• Basic understanding in CNC machining (desirable)
• Basic project management skills. (desirable)
• 5CT / API Specification Knowledge. (desirable)
• Ability to communicate effectively across the functions. (desirable)

Qualifications:

• Diploma in Engineering (Mechanical/ Manufacturing)

Job Highlights:

Stable and friendly working environment.

Various Bonus.

Provide opportunities for career advancement within Co.

Work and life balance.

Job Description & Requirements:

Due to an increase in our service activities in our service department, we are looking for a qualified Engineers in the feild of automation or Instrumentation for marine vessels.

1. Experience in shipyard and marine vessels.

2. Experience in servicing of vessel automation systems.

E.g. Tank gauging, gauges, transmitters, valve positioner, etc.

3. Ability to work both independently and as part of team.

4. Able to travel to regional countries.
5. Good communication skills.

6. Class 3 driving licence (prefer).

Arkema is the leading manufacturer of this unique advanced material’, which is very durable, fully recyclable, and is produced 100% from castor oil, a renewable and sustainable raw material. Its applications are many and varied in automotive, sports, consumer electronics, 3D printing/additive manufacturing, bio-textiles, and medical, all of which are experiencing strong growth, particularly in Asia.

This new plant will increase our polyamide 11 global production capacity by 50%, in full accordance with a circular economy approach.

Join Arkema and...

Design the materials of tomorrow
We work towards sustainability every day, using our technological breakthroughs to boost our customers’ performance.

DESIGNER OF INNOVATIVE SOLUTIONS
Work for an international leader in its markets
Arkema is one of the top three global leaders in almost all of our product lines, generating an equal volume of sales in Europe, North America and Asia.

We are hiring for Process Technician and following is the Job Description :-

MAIN RESPONSIBILITIES

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists,
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition,
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers,
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements,
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers,reactors, driers, compressors, pumps, etc according to established practices and procedures,
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman,
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements,
• Collect process samples from assigned sampling points in a safe manner,
• Equipment Inspection Tours according to checklist.

First Line Maintenance

• Perform first line maintenance task for equipment size below 4” eg. cleaning strainers or filters, opening & closing flanges, connecting hoses, tightening packing or flange leaks.

Quality Assurance

• Online (PI system) quality monitoring,
• Reporting deviations to supervisor, investigate process conditions and adjust process variables accordingly.

HSE

• Report all incidents, near misses, deviation from plan promptly to Supervisor,
• Create and issue Safe Work Permits (Part of Work Flow),
• Isolates all equipment (lock out / tag out) as required, in accordance with established procedures,
• Performs CAR Seal Checks according to annual program,
• Participates as a member of the Initial Response Team during emergencies,
• Prepares equipment for maintenance ensuring all required testing (JSO's) has been performed,
• Performs site verification before accepting & closing off Safe Work Permits,
• Contribute to the improvement of the Safety, Health, Environment and Quality Programs.

Daily Management

• Performs Shift Handover,
• Attends Daily Tool Box Meeting,
• Conduct proper shift relief and documentation in shift report and shift handover.

Materials Management

• Cover Material Receiver’s role during his absence.

Administrative

• Maintains open and continuous communication and feedback to Supervisor,
• Maintains good housekeeping around work place & plant
• Participates in safety committee and housekeeping activities as required,
• Accepts on call duty and overtime as required,
• Works as a member of the shift team to achieve measurable performance objectives by understanding and accepting roles and responsibilities within the shift team,
• Willing to work on special projects as needed.

EDUCATION/BACKGROUND

• NITEC in Chemical Process or Diploma in Chemical Engineering
• At least 2 years of experience within Chemical and/or Petrochemical industry

SKILLS & KNOWLEDGE

• Knowledge in Distributed Control System (DCS) is a plus
• Forklift's driving license;
• Reactive to malfunctions
• Reporting skills
• Effective team player with good communication skills
• High self-motivation
• Attentive to details