Responsibilities:

· Reporting to Managing Director

· Prepare, schedule, coordinate and monitor the assigned project

· Perform overall quality control of the work (budget, claims, schedule, plans, personnel’s performance) and report regularly on project status.

· Ensure that works complies with standards, regulations, and safety guidelines.

· Liaise with Consultant on technical issues & assist in Site inspections and coordination.

· Coordinate the handing over of completed works and completion of the necessary rectification works.

Requirements:

· Degree in Civil Engineering (Recognized Degree by PE Board)

· Proven working experience preferably in civil works

· Decision making ability and leadership skills

· Excellent organizational and communication skills

· Attention to detail and problem-solving skills

· Proficient in MS Office, AutoCAD and Project management software

· Relevant training and/or certifications

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 3 years of working experiences in construction industry.

• Location: Labrador Park

• Working hours: 8.30 - 17:30

• Salary: AWS + VB provided

Application Engineer

Our client, known for its memory products, is looking for a professional who can contribute and support effectively to the team.

Job responsibilities:

• Product promotion and technical support to customers, including regional customers
• Conduct product presentations and training sessions to showcase product capabilities and features
• Prepare technical proposals and collaborate with sales and follow up customer project coordination
• Develop and evaluate hardware/software solutions for memory products
• Collect and analyze market data to identify industry trends and prepare reports
• Liaise with headquarters to resolve technical issues and propose solutions
• Understand and analyze customer requirements, recommending new products or system solutions

Job Requirements:

• Bachelor’s Degree/Diploma in Engineering (Electrical/Electronic) or equivalent
• Prior experience in a similar role is an advantage
• Knowledge of memory system design, development, architecture
• Strong analytical and problem-solving abilities with excellent communication and sales/marketing skills
• Practical experience with product development and system architecture in storage solutions

Interested applicants, please send your resume to Charlene (R22105303) at [email protected] with the email subject header "Application Engineer".

We regret that only shortlisted candidates will be notified. Other applications will be updated in our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Please find our Privacy Policy Agreement in the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your kind understanding and co-operation.

Pasona Singapore Pte Ltd

EA License No:90C4069

(Lau Rui Lin, Charlene, EA Registration No: R22105303)

Duties & Responsibilities:

Cost Estimation:
•Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
•Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off
•Perform quantity take-offs for materials and labour required for MEP installations;
•Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control
•Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
•Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement
•Assist in the preparation of tender documents and participate in the procurement process;
•Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration
•Administer and manage contracts related to MEP works, including variations and claims;
•Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering
•Identify opportunities for value engineering to optimize project costs without compromising quality;
•Work closely with design and construction teams to implement value engineering recommendations;

Risk Management
•Identify and assess potential risks related to cost and contract issues;
•Develop strategies to mitigate risks and ensure project success;

Cost Reporting
•Generate regular cost reports to keep stakeholders informed of project financial status;
•Provide analysis and recommendations based on cost reporting data;

Collaboration
•Collaborate with architects, engineers, contractors, and other project stakeholders;
•Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance
•Ensure compliance with relevant regulations and standards in MEP construction;
•Stay updated on industry trends, codes, and best practices;

Ad-Hoc
•Undertake cost analysis for repair and maintenance project work;
•Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:
• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.

• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.

• Good working knowledge in Mechanical and Electrical.

• Organizational skill with attention to detail, adaptable and flexible.

• Good communication and facilitation skills.

• Ability to work well in a team, independently and demonstrate initiative and commitment.

Job Description:

• Apply cloud (AWS, Azure, GCP) computing skills to deploy upgrades and fixes.
• Put in place continuous integration (CI) and continuous deployment (CD) processes and tools to deliver quality software based on user feedback.
• Develop scripts to automate build, software release, application deployment and system and application management.
• Collaborate with team members to improve the company’s engineering tools, systems and procedures, and data security.
• Conduct automated system-level vulnerability security scan, harden system and application platform.
• Liaise with software and hardware vendors to manage and resolve incidents and technical issues.
• Liaise with 3rd party hosting providers to manage and resolve incidents and technical issues.
• Prepare and maintain technical documentation.

Job Requirements:

• Bachelor’s in Computer Science, Information Technology, Software Engineering, or a related field.
• Past track records in Solaris UNIX/Linux/Windows Systems Administration.
• Expert in code deployment tools (GIT, Nexus, Ansible, and Chef).
• Exhibit expertise in software development methodologies.
• Strong knowledge in setting up DevOps tools.
• Past track records in virtualisation/container technology and setting up continuous integration/continuous deployment processes and tools.
• Knowledge in application development and setting up of middleware.
• Knowledge in vulnerability assessment and remediation.
• Knowledge in setting up and maintaining databases.

• Good understanding of M&E infrastructure.
• Supervise preventive maintenance activities and ad-hoc works orders on mechanical, electrical, and other installed M&E systems and ensure timely and quality work.
• Experience working in critical M&E facilities or experience in ACMV, electrical or fire systems will be an advantage.
• Able to carry out impact assessment during system fault and technically sound to contain fault to ensure M&E system service continuity.
• Ensure proper escalation in accordance with incident escalation process.
• Carry out work in accordance with site processes and requirements.
• Proactively look out for site abnormalities and possible areas of improvement, recommend solutions and put-up proposal to Supervisor.
• Able to review SOPs, MOPs and EOPs.
• General facilities duties, including monitoring of equipment and report on daily condition.
• Occasionally perform simple repair work such as lamp replacement or door repair.
• Any other duties assigned by Site Supervisor / Engineer Lead.

• Flexible with 24x7 rotating shifts.
• Experience in data centres facilities management will be an added advantage

Our client, one of Asia-Pacific’s leading organizations is looking for:

Test Engineer

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including test planning, analyzing business and system requirements.

Responsibilities:

• Preparing the test environment, designing, and developing the test cases.
• Preparing the test environment, executing the test procedures.
• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.
• Create traceability to requirements, analyze gaps and address them.
• Logging and tracking defects to closure
• Conducting test reviews with internal and external stakeholders.
• Perform root cause analysis for production and user acceptance defects, address test gaps to ensure test efficiency.
• Develop design documents and user manuals which would effectively describe and provide clear instructions on the test automation solution to the end users who include testers and stakeholders.

Requirements:

• Bachelor's Degree in Information Technology or Engineering
• At least 3 years’ relevant experience in executing testing and developing test automation solutions involving devices (UI-based or embedded) and/or back-office systems with familiarity on the full system development lifecycle from requirement, development, to testing and deployment.
• Good written and verbal communication skills.
• Able to work well both independently as well as in a team.
• Certification in software testing preferred.
• Experience in Micro-payments/Automatic Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage.

-----------------------------------------------------------------------------------------------------

Interested applicants can also email CV at [email protected] (for faster processing, please state the exact job/position title applied “Test Engineer”)

Only shortlisted candidates will be notified.

-----------------------------------------------------------------------------------------------------

EA License Number: 10C3636
EA Personnel Name: Jagveer Singh Arora
EA Personnel Registration Number: R22109615

• Oversee the setup, upkeep, and management of servers, networks, and cloud infrastructure.
• Design, implement, migrate, troubleshoot, and maintain IT network infrastructure, focusing on backup, security, redundancy, and disaster recovery.
• Analyze and validate network architecture through usability testing, providing recommendations for upgrades.
• Monitor and report on network performance and status to key stakeholders.
• Plan and manage the deployment and maintenance of end-user computing devices.
• Coordinate and execute tasks for IT operations projects.
• Support the implementation of ISO27001 information security measures and associated security systems.

Qualifications

• Bachelor's degree in Computer Science, Information Technology, or related field.
• Proven experience in digital infrastructure architecture, network design, and cybersecurity strategy.
• Proficiency in cloud platforms, network monitoring tools, and cybersecurity frameworks.
• Strong analytical skills and the ability to communicate complex technical concepts to non-technical stakeholders.

To apply, please visit www.gmprecruit.com and search for Job Reference:

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Location: Central

Salary: Up to 4200 SGD / month + AWS + Up to 1 month variable bonus + Additional OT and standby allowance

Responsibilities:

• Involve in the project or maintenance services related with General Security Systems, Alarms Systems, CCTV Systems, Access control systems and Server & Network infrastructure and whenever required.
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup
• Troubleshoot problems encountered on site
• Perform OS hardening, patching and updating on servers/VM
• Develop implementation plan, migration plan and acceptance test plan for the project.
• Conduct acceptance test with users and address the testing findings/issues
• Work closely with Project/Maintenance Managers in planning the implementation tasks
• Maintain accurate and consistent set of work instructions service delivery processes.
• Develop As-built documentation for handover

Requirements:
• Candidate must possess at least a Professional Certificate/Nitec, Diploma, Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/Information Technology ) or equivalent
• Minimum 2 years’ experience in Operational Technology/Information Technology industry
• Knowledge of networking and IP/TCP protocol
• In-depth knowledge in CCTV, Access Control and System Server etc.
• Hands-on experience in security-related tasks such as OS tightening, patching and updating, virus scanning will be an added advantage.
• IT Certification in windows system & storage, network, database, virtualization, cloud technologies will be an added advantage
• Candidate must possess a Class 3 driving license (need to drive company vehicle)

Registration No. / Unique Entity Number: 199801439D

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Infrastructure Development:

• Design, implement, and manage scalable, secure, and reliable infrastructure on AWS EC2.
• Utilize Docker, Kubernetes, and EKS for containerization and orchestration of microservices.

CI/CD Pipeline Management:

• Develop and maintain CI/CD pipelines using GitLab and ArgoCD to automate the build, test, and deployment processes.
• Integrate QA tooling into CI/CD pipelines, including Cypress for E2E testing.

Configuration and Automation:

• Implement Infrastructure as Code (IaC) using Terraform for efficient resource provisioning.
• Manage configuration management using Ansible to automate system configurations and deployments.

Networking and Security:

• Configure and manage load balancers using Traefik to ensure optimal traffic distribution.
• Implement service mesh technologies like LinkerD to manage service-to-service communication securely.
• Ensure infrastructure security and compliance with industry best practices.

Monitoring and Logging:

• Set up and maintain monitoring and alerting systems using tools like CloudWatch, Prometheus, Grafana, and Splunk.
• Proactively identify and resolve system issues to maintain high availability and performance.

Collaboration and Support:

• Work closely with development and QA teams to understand application requirements and ensure seamless integration.
• Provide support for development and staging environments, facilitating efficient testing and deployment cycles.

Optimization and Cost Management:

• Analyze system performance metrics to optimize infrastructure for cost and efficiency.
• Implement strategies for resource optimization without compromising on performance.

Qualifications:

Education:

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.

Experience:

• Minimum of 3 years of experience in a DevOps or similar role.
• Proven experience with AWS services, particularly EC2, RDS, and networking components.
• Strong expertise in containerization using Docker and orchestration with Kubernetes.
• Past experience as a software developer is highly advantageous.

Technical Skills:

• Proficiency in setting up CI/CD pipelines using GitLab and ArgoCD.
• Hands-on experience with Infrastructure as Code tools like Terraform.
• Familiarity with configuration management tools such as Ansible.
• Knowledge of load balancing with Traefik and service mesh implementations using LinkerD.
• Experience with logging and monitoring tools, specifically Splunk.
• Scripting skills in Bash, Python, or Go for automation tasks.
• Understanding of microservices architecture and RESTful APIs.
• Familiarity with our tech stack is a plus: TypeScript, Go, ReactJS, ExpressJS, Gin-gonic, GraphQL with JWT authentication.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Excellent communication and interpersonal skills.
• Ability to work collaboratively in a fast-paced, agile environment.
• Detail-oriented with a focus on delivering high-quality work.

Preferred Qualifications:

• Certifications such as AWS Certified DevOps Engineer, Certified Kubernetes Administrator (CKA), or similar.
• Knowledge of Redis, MySQL, PostgreSQL, and Elasticsearch.
• Experience with QA tools integration, including Cypress and Pact.js.

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

• Responsible for the operation and maintenance of new wind farm/storage SCADA (Supervisory control and data acquisition) software system, maintaining SCADA system stability and solving SCADA system issues
• Responsible for collecting customer issues and requirements, handling or coordinating relevant parties to follow-up
• Responsible for checking new projects' delivery quality when handover from delivery team
• Responsible for summarizing projects' issues and generating reports weekly or monthly
  
  Job requirements
• Majors in electrical engineering, automation, computer etc., experience in relay protection, wind power or photovoltaic or SCADA system debugging is preferred;
• Familiar with communication protocols such as Modbus and IEC104, be able to handle common communication issues independently
• Familiar with Linux commands and basic network knowledge, experience in physical server and gateways is preferred
• Good communication and coordination skills, able to independently connect with customer, project management experience is preferred
• Having a strong sense of responsibility and a certain ability to handle pressure
• Domestic and international (asia) travel (40% of time).

• Candidate must possess at least Bachelor's Degree in Engineering (Civil & Structural) from local or recognized foreign universities subject to Client's approval
• 3 years & above working experience in the related field is required for this position
• Perform Engineering Design and drawings
• Project coordination and documentation
• Perform building/site inspections.
• Attend progress meetings.
• Work related travel and meetings
• Any other duties as assigned

Job Requirement

• Keen to learn and work independently with minimum guidance.
• Able to work under pressure, dynamic, creative and results oriented.
• Conversant in regulatory requirements and building codes.
• Good knowledge of AutoCad and Revit.
• Possess Class 3/3A driving license preferred.

Job Responsibilities:

1. Responsible for the electrical design of the company's equipment, including electrical diagram drafting, selection of electrical components, and electrical control system programming.
2. Participate in the installation, debugging, and maintenance of electrical equipment to ensure stable system operation.
3. Develop optimization plans for electrical systems to improve equipment operating efficiency and safety.
4. Analyze and resolve electrical faults during equipment operation and provide technical support.
5. Prepare electrical technical documentation according to project requirements, including electrical schematics, wiring diagrams, and operation manuals.
6. Keep up with the latest industry technologies and suggest improvements for electrical systems.
7. Collaborate with related departments such as mechanical and process engineering to ensure smooth project implementation.

Job Requirements:

1. Bachelor's degree or above in Electrical Engineering, Automation, or related fields.
2. Familiar with mainstream PLC programming and applications (such as Siemens, Mitsubishi, Omron, etc.), with experience in touchscreen and human-machine interface development.
3. Proficient in electrical schematic drawing software (such as CAD, electrical drafting tools).
4. Familiar with national standards and industry regulations related to electrical systems.
5. Experience in the design and maintenance of low and high-voltage distribution systems is preferred.
6. Strong problem analysis and solving skills, with a good sense of teamwork.
7. Electrical qualification or related certification is a plus.
8. 1-3 years of relevant work experience (exceptional recent graduates will also be considered).

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 3 years of working experiences in construction industry.

About the Role:

We are seeking a Resident Engineer (Civil) to join our team working on various construction projects. The role involves assisting the QPS in daily supervision and coordination duties, including working on rotation shifts, which may include night shifts and public holidays. Your role as the Resident Engineer will be pivotal in ensuring the successful execution of construction projects, adherence to regulations, and maintaining high-quality standards throughout the project lifecycle.

Responsibilities:

- Provide site supervision for Civil, Structural, and miscellaneous works for infrastructure projects.

- Oversee Resident Technical Officers (RTOs) in their daily duties.

- Coordinate with contractors on work schedules, progress, work quality, site safety, and quality control.

- Liaise and coordinate with relevant authorities and local communities for on-site works.

- Administer contracts, including assessing progress payment claims, variations, extension of time, etc.

- Monitor that the Contractor's work aligns with drawings, specifications, approved methods, and schedules.

- Review Contractor submissions such as materials, suppliers, construction methodology, etc.

- Coordinate with other contractors working on-site.

- Provide regular feedback and reports to the Consultant on work progress and suggest improvements related to safety, supervision, security, construction, and maintenance.

Job Requirements:

- Minimum Degree in Civil or Structural Engineering, or equivalent accreditation recognized by the Professional Engineers Board (PEB) Singapore.

- Registered as a Resident Engineer accredited by the Institution of Engineers Singapore (IES) or the Association of Consulting Engineers Singapore (ACES).

- Possess 3-5 years of site supervision experience as a resident engineer, preferably with HDB/LTA project experience.

- Thorough understanding of Building and Construction Authority (BCA) Regulations, systematic site record maintenance, government contract documents, and compliance with BCA reporting requirements.

- Proficiency in MS Word, Excel, and Project for project updates and reports.

- Familiarity with local codes and regulations.

- Ability to fulfil duties as the Qualified Person (QP) representative as per BCA regulations, reporting to the project QP and Engineers.

- Effective communication and interpersonal skills.

- Experience in supervising major earthworks, roads, drainage works, PUB pipeline works, and associated projects is advantageous.

- Willingness to travel and work at multiple sites.

Job Scope :

• Test and calibrate various parameters of the lithium-ion battery.
• Design the system structure, control procedure and communication protocol of BMS.
• Design BMS hardware, including schematic design, PCB layout design, standard BOM, selection and application of electronic components.
• Coding for BMS software, including joint debugging, upgrading and maintenance.
• Co-work with other engineers to complete the functional verification and optimization of BMS.
• Finish relevant documents in the process of BMS development, including the design document, test method, battery analysis report and SOP, etc.
• System maintenance and upgrade of front-end handheld device and back-end servers.
• Co-work with mechanical engineers to complete some basic mechanical design work and reliability calculations.
• Troubleshoot for customers in after-sales services such as maintenance and repairs.

Requirements:

• Minimum Bachelor/Master degree.
• Major in the computer, communication, automation, electronic and other related.
• Good knowledge in battery management system control principles, system architecture, testing methods and hardware design.
• Familiar with embedded system development, computer principle and electronic circuit design.
• Familiar with EDA software.
• Familiar with CANBUS, I2C, SPI, RS485 and RS232 communication principle, proficient in C, C++ is a plus.
• Design product box casing with mechanical design software such as Solidworks (Optional).

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Responsibilities

• Assist the Project Manager in the daily execution of work
• To supervise & ensure works are in accordance to the contract drawings & specifications
• Establish and implement controls to ensure that works are carred out safely accordingly to the works programme and produce short term work plans
• To monitor the installation progress as well as coordination with Client, Consultants & vendors to ensure efficient & timely delivery of assignment
• Prepare & submit site progress reports & other necessary project documentation
• Assist in the preparation of progress payment claims & variation orders where required
• Monitor, control and coordinate site works with the operations team as well as the contractors
• Attend safety, technical & daily site progress meetings
• Ensure that all corrective action or preventive action is implemented effectively and quality records are properly maintained
• Conduct site inspection with relevant parties to resolve technical/site issues
• Ensure timely handover of project
• Other project-related tasks as deemed necessary

Requirements :-

• Diploma/Degree in Civil Engineering or equivalent
• Min.4 years of working experience in construction industry
• In-depth knowledge of project management principles
• Able to work independently with minimal supervision

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Job Highlights

• Permanent Position / MNC/ Near Woodlands MRT/ Urgent Hiring!!
• Afternoon Shift (Monday to Friday: 3pm – 11pm, Sat: 1pm - & 7pm)
• Afternoon Shift allowance
• AWS bonus, Annual Leave,Medical Benefit, Dental Benefit

Our client is a global advanced precision engineering & manufacturing solutions provider. Due to fast expansion, they are actively seeking for Automation Engineer

Responsibilities

• Responsible for all automation related activities of the product.
• Responsible for the Maintenance and Repair of production automated machines.
• Optimise automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipments are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues
• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Continuous Improvement to enhance quality and productivity through automated processes
• Perform internal quality system audit.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement

Requirements

• Degree/Diploma in Engineering-related discipline, preferably Mechatronics
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA
• Results-oriented, meticulous and a self-motivated team player

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Job Summary

• This role is responsible for designing portions of engineering solutions, developing and implementing parameters and test plans, and conducting feasibility studies.
• The role applies intermediate level of subject matter knowledge to design, analyze, build, and test mechanical components.
• The role participates in project teams with internal and outsourced partners to develop reliable, cost-effective, and high-quality solutions.
• The role manages relationships with partners and suppliers, oversees design engineering change processes, and drives value engineering projects.

Responsibilities

• Designs portions of engineering solutions for mechanical and thermal hardware, electronics enclosures, and production tooling based on established engineering principles and in accordance with development technology practices and guidelines.
  Develops and implements parameters and test plans for existing designs, including validation of tolerances, form/fit/function, shock and vibration, electromagnetic interference, safety, reliability, developing fan curves, system power measurements & acoustics.
  Conducts feasibility studies, design margin and validation analyses and empirical testing on new and modified designs.
• Performs root cause analysis of defects, propose, evaluate and implement solutions.
  Works in a collaborative environment to design, analyze, build and test mechanical components, devices, structures and assemblies, including mechanical ground support equipment.
  Participates as a member of project team of other mechanical hardware engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for low to moderate to complex products.
  Manages relationships with outsourced partners and suppliers, on mechanical and thermal design and development, including setting expectations regarding deliverables, product quality, schedules, and costs.
  Manages design engineering change notifications/engineering change approval request processes, qualification tests, and schedule.
  Manages value engineering project proposals, schedule, tests, and communication.

Education & Experience Recommended

• Four-year or Graduate Degree in Electrical Engineering, Computer Engineering, Computer Science, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 2-4 years of work experience, preferably in engineering design and solutions, implementation across hardware development lifecycle, or a related field or an advanced degree with little or no work experience.

Responsibilities:

• Project handling from sizing to roll-out cloud-based solutions.
• Design and implement cloud-based solutions using platforms such as AWS, Azure, or Google Cloud.
• Architect and configure scalable, secure, and high-performing cloud environments.
• Design, implement and administer Storage Arrays of multiple vendors like EMC, Hitachi and Netapp.
• Automate infrastructure provisioning using Infrastructure-as-Code (IaC) tools (e.g., Terraform, CloudFormation).
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi-AZ VPC Instances
• Troubleshoot and resolve cloud environment issues efficiently, actively engage stakeholders during Incident management and change management process.
• · Ensure the security of cloud environments by working with Infra team to implement best practices, including IAM, encryption, and firewalls.
• Optimize cloud resources for performance and cost efficiency, including rightsizing and cost analysis.
• Work with Infra team to manage, monitor, and optimize cloud infrastructure to ensure high availability and reliability.
• Implement and maintain monitoring and alerting systems using tools like CloudWatch, Azure Monitor, or Google Stackdriver.
• Work closely with developers, DevOps teams, and stakeholders to ensure smooth cloud integration and operations.
• Evaluate and recommend new tools and services to improve the cloud infrastructure

Requirements:

• Bachelor’s degree in computer science, Information Technology, or a related field with 5 to 10+ years of experience in cloud engineering and/or cloud system administration. Proven experience as a Cloud Engineer, with clear understanding of cloud and on-premises infrastructure and network components. Experience in multi-cloud environments like AWS and Azure is a must
• At least 3 to 5 years cloud solutions project handling experience from sizing to roll-out, preferably with project management background.
• Design, implementation and administration experience of Storage Arrays of multiple vendors like EMC, Hitachi and Netapp is a must.
• Storage performance tuning and troubleshooting for cloud environment.
• Must have hands-on implementation experience on Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Must have hands-on implementation experience on AWS Cloud Specific technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Good understanding of AWS Elastic Block storage (EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Incident management and change management process knowledge.
• Strong analytical skill, very initiative, good planning & systematic execution

Job Title: Cybersecurity Engineer

Employment Type: Contract

Working Hours: Hybrid Working Arrangement

Location: One North

Salary: Up to $5,000

The Cybersecurity Engineer supports client’s cybersecurity by monitoring systems, managing alerts, and aiding in risk management and response coordination.

Key Responsibilities:

• Monitor and triage security alerts from SIEM systems.
• Assist with management of SIEM, PAM, AV, EDR, and Web Proxy systems.
• Support user and privileged account management, including onboarding and offboarding.
• Assist with vulnerability scans and compliance tracking.
• Analyze phishing emails to identify threats.
• Conduct risk assessments and recommend mitigation strategies.
• Distribute and track cybersecurity advisories.
• Respond to Requests for Information (RFIs) from cybersecurity agencies.
• Handle internal RFIs related to security incidents.

Requirements:

• Diploma in Information Technology, Cybersecurity, or related field
• Min. 1 year of relevant experience in cybersecurity operations
• Good to have SIEM, PAM, AV, EDR, Web Proxy

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Siew Ting (Maeve) - Outsourcing Team

ScienTec Consulting Pte Ltd – 11C5781

Role and Responsibilities

• To co-ordinate with the clients, subcontractors, and consultants on project matters
• Management, supervision and coordination of construction activities.
• Supervise team members, subcontractors and daily work activities on one or more project site(s) allocated.
• To ensure supervisors and workers meets client & regulatory requirements, environmental, safety and health requirements
• Monitor progress at site and put up progress claim.
• Coordinate and assist QS and Project Manager on project progress and claims.
• Other adhoc duties by management assigned from time to time.
• Participate in project design meetings and propose improvements.
• Evaluate potential problems and technical hitches and develop solutions.
• Plan and manage team goals, project schedules and new information.
• Manage project-related paperwork.
• Direct project correspondences by preparing and reviewing project proposals, memos, meeting minutes and emails.
• Communicate with clients to identify and define project requirements, scope and objectives.

Requirements

• Minimum Diploma Holder/ ANY
• Minimum 5 years' experience in site coordination.
• Excellent project management skills
• Team leadership
• Working knowledge of various computer software programs (MS Office, POS)

Job Responsibilities & Duties

• Configure, maintain, and enhance CI/CD pipelines to streamline change and release management processes, ensuring efficient and reliable software delivery.
• Maintain and integrate tools for configuration management, build automation, continuous integration/deployment, monitoring, reporting, and alerting.
• Implement and operate monitoring and alerting tools to ensure system reliability and availability.
• Develop and maintain automation scripts for tasks such as server configuration, CI/CD workflows, and infrastructure provisioning.
• Participate in capacity planning and risk management, ensuring systems are prepared for growth and unforeseen challenges.
• Explore and adopt innovative DevOps methodologies to improve production reliability and overall system availability.
• Apply and enforce security practices to protect the organization’s infrastructure and data, adhering to industry standards and regulatory requirements.
• Collaborate with cross-functional teams to build high-quality, scalable environments that support both development and production systems.
• Efficiently prioritize and execute tasks in a fast-paced, high-pressure environment.

Experience required:
At least 2 years of hands-on DevOps Engineering experience, complemented by an additional 2 years or more in Software Engineering or System Administration roles.
Technical Proficiency:

• Hands-on experience with AWS services, including deployment and management of cloud infrastructure.
• Proficiency in containerization technologies, particularly Docker and Kubernetes, with practical experience in production deployments. Hands-on experience with Openshift is an advantage.
• Expertise in Infrastructure-as-Code (IaC) tools (e.g. Terraform, CloudFormation) for provisioning and managing cloud infrastructure.
• Strong understanding of Linux server administration, with scripting proficiency in Bash.
• Solid knowledge of virtualization and networking concepts, including firewalls, DNS, and load balancers.
• Familiarity with GitOps tools (e.g., ArgoCD, Flux) for automating infrastructure and application deployments.
• Enhance developer productivity by maintaining efficient and developer-friendly CI/CD workflows, and optimizing build times.
• Support developers in debugging and troubleshooting deployment-related issues to ensure smooth integration with production systems.
• Monitoring & Analytics Tools:
• Experience with tools like Prometheus, Grafana, and ELK/Opensearch/Elasticsearch for monitoring, logging, and visualization.

---------------------------
Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.