Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

1. Packing of finished product into paper bags weighing 20kg to 25kg
2. Stacking of finished product packed in paper bags onto wooden pallets
3. General housekeeping of work area
4. Ad hoc duties as assisgned by supervisor
5. Candidate will be trained to run production of chemial processes when more experienced
6. Protective gear must be worn during work (E.g. safety helmet, mask, ear plugs, gloves, safety boots)

• 5 days, Jurong, Transport provided
• Basic salary: $4000 - $4800, AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• 1-3 years of relevant experience in Process Engineering
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Jurong West, Transport
• $4000 - $4700 basic salary, 1mth AWS, performance bonus
• Medical/dental benefits
• Able to start within short notice/1 month

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Boon lay, Transport provided to & fro
• $4000 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Why Patients Need You

Our breakthroughs would not make it to the hands of patients without our pharmaceutical manufacturing team. We rely on a team of dedicated and agile members, who understand the importance and impact of their role in Pfizer’s mission. Patients need colleagues like you who take pride in their work and always look to improve outcomes. You will help to ensure that patients and physicians have the medicines they need, when they need them.

What You Will Achieve

You will be operating automatic and manual chemical process equipment of varying complexity in various production processes in accordance with operating procedures. You will perform quality control analyses as required to complete in-process batches and identify variations. You will be trained in hazardous material handling and emergency procedures as these processes may generate high pressure and/or critical reactions.

As part of technical operations, you will be a team member who is relied to have a good understanding of procedures, techniques, tools, materials and equipment. Your decision making will help you prioritize workflows based on the available resources. You will follow standard procedures to complete tasks, some of which may vary in scope, sequence, complexity and timing. You will contribute to the team’s success by sharing your previously acquired knowledge.

It is your hard work and focus that will help in making Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Manage own time and professional development, be accountable for own results and prioritize own workflow.
• Operate automatic and manual chemical process equipment of varying complexity in various production processes in accordance with operating procedures.
• Perform duties required in operating a variety of equipment used in your assigned area of the division, maintaining responsibility for tasks as assigned.
• Operate process equipment, such as filter presses, pumps and agitators.
• Participate in quality and safety incident investigation.
• Troubleshoot all operating deviations and issues and coordinate with other function when required.
• Complete all documentation according with Good Manufacturing Practices {also cGMP} and Good Distribution Practices {part of GxP} standards.
• Responsible for preparation and clearing of equipment for maintenance work.
• Perform material receiving, staging, transfer, dispensing, sampling, and charging operation.
• Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process.
• Maintain Pfizer standards and values for quality, safety and environmental objectives as well as meeting production goals.
• Complete all trainings by attending scheduled training.

Qualifications

Must-Have

• High School Diploma or GED
• 2+ years of experience
• Knowledge of industry practices and standards
• Ability to work in a team environment and have good interpersonal skills is essential.
• Effective written and oral communication
• Computer Skills, such as Microsoft Applications and experience with System Application & Products

Nice-to-Have

• Bachelor's Degree
• Experience in a chemical or formulation manufacturing environment

Passionate candidates having sales experience at least of 2 to 3 years in the field of surface treatment such as electroplating, are requested to send their resumes to the given email id in addition to [email protected].

Salary range: S$ 4,500 to S$5,000 (negotiable)

Workhours: 5 days

Ps. Having a driving license is desirable.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Help us get ahead of disease together with our Vaccines MSAT (Manufacturing Science & Technology) team.

Education required: Diploma in Biotechnology or another relevant field.

Language requirement: Written and spoken fluency in English
Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

Looking to gain valuable real world work experience and help positively impact the health of billions of people? Apply for a GSK Traineeship today!

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

A certificate will be given to successful trainees upon completion of the programme.

What will you do?

The MSAT process science technician’s role is to support the scientists in various process development and process evaluation studies via various tasks such as inventory management, buffer preparation, trial execution and sample management.

• Management of MSAT Process Science facility
• Support qualification of MSAT Process Science equipment
• Support process development / evaluation trials
• Sample management
• Support Environment. Health, Safety and Wellness initiatives

What will you learn?

• Develop strong scientific understanding for process development of various vaccines portfolio.
• Master important skills for laboratory management such as inventory and sample management
• Run process development trials independently and interpret trial outcomes

What are we looking for?

• Diploma in Biotechnology or another relevant field preferred.
• Relevant experience in the bio/pharmaceutical industry in Production, Process Development, Quality Control, R&D or MSAT is a plus.
• At least 2 years' experience in bio/pharmaceutical industry.
• Good knowledge of safety and environment regulations. Good communication skills.
• Good documentation skills.
• Good command of English (verbal and written).

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals.
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

The position is responsible for supporting the Assistant Director of Learning & Development in creating, implementing and facilitating the hotel’s Learning & Development (L&D) plan and budget, ensuring that it is aligned to the hotel’s overall goals and strategic plan as well as for all operational departments to follow through on their training and development commitments.

Primary Responsibilities

Assists with the hotel’s L&D needs analysis and prepares the L&D plan and budget

• Plans and conducts the hotel’s L&D needs analysis of individual colleagues with Assistant Director of Learning & Development.
• Assists in the planning of the hotel’s annual L&D budget, aligning it to the L&D needs analysis.
• Assists in controlling hotel wide and departmental L&D expenditure within agreed budgets.

Creates, plans and executes L&D programmes

• Designs L&D programmes necessary to meet the competencies of each job function and to address performance gaps with the Assistant Director of Learning & Development.
• Coordinates and follows up on all corporate, internal and external L&D initiatives and programmes.
• Assists in the delivery of programmes as assigned by Assistant Director of Learning & Development.
• Informs managers on L&D programme objectives and expected outcomes which colleagues attend.
• Monitors, measures and reports on colleagues’ L&D plans and achievements within agreed formats and time frame.

Adheres to corporate and local L&D regulations

• Ensures full compliance when coordinating and executing corporate initiated programmes and activities.
• Ensures that all learning activities meet with relevant statutory and organisational policies and requirements.
• Adheres to learning requirements set by local authorities and regulations, especially relating to safety and security. These include Basic Food Hygiene, Occupational First Aid, Work at Height, Company Emergency Response Team, etc.

Coordinates industrial attachment and internship programmes

• Liaises with local and foreign educational institutions to recruit and select students for internship placement in the hotel.
• Assists with the planning of interns’ L&D schedule in consultation with the Assistant Director of Learning & Development and functional / departmental managers.
• Organises regular meetings with the Assistant Director of Learning & Development and interns to monitor and ensure their welfare.
• Administers the personal files and records of interns.
• Maintains engagement with local hospitality institutions through activities such as guest lectures and site visits.

L&D administration

• Maintains appropriate systems to record and measure necessary aspects of colleagues’ L&D. These include on-the-job learning, internal and external learning, attendance, development plans, etc.
• Assists in the planning of an ongoing L&D calendar and shares it with management to ensure that learning resources and opportunities are maximised.
• Organises the learning venue, course notes, attendance sheet and all relevant materials required for classroom learning programmes.
• Assists in gathering information required to complete monthly accruals, forecast reports as well as corporate reports accurately within specified time frame. 
• Liaises with Workforce Singapore and administers SkillsFuture claims for relevant courses.

Works as part of the Talent & Culture team, and involvement in wider job function relationships

• Assists and supports the Talent and Culture team in projects and colleague activities as required.
• Upholds AccorHotels Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes such as Corporate Social Responsibility, Diversity and Inclusion, Women at AccorHotels Generation (WAAG), etc.
• Performs any other duties and responsibilities that may be assigned.

RESEARCH AND DEVELOPMENT CHEF Job description

The Research and Development (R&D) Chef creates new recipes to improve food product from the organisation. Ready to designs new recipes in consideration of ideas and market demand for new products. Ready to improves recipes and preparation methods to meet mass production and regulatory needs. Ready to helps to design marketing strategies based on candidate approach and ideas in creating new products.

Candidate should skilled in culinary arts and is experienced in the Food and Beverage (F&B) sector. Candidate works in a kitchen or laboratory. Candidate has good knowledge on food science and is familiar with nutrition and mass production needs. Candidate has sound understanding of cultural and culinary trends. Candidate is very creative in developing and presenting products.

Duties and Responsibilities

• Assist in data gathering for new product specifications.

• Confirm product formulations and other information for constructing product profiles.

• Create new recipes and refine taste profiles through experimentation.

• Develop ideas from food preparation processes for marketing purposes.

• Develop product improvements based on sensory testing and consumer data.

• Establish product specifications and documentations.

• Make recommendations in the design of new manufacturing processes or to change current equipment or processes.

• Modify new product recipes and ingredient selection while taking note of nutrition, shelf life and regulations.

• Plan, manage and run panel sessions and sensory tests on food products.

• Refine recipe formulation for mass production purposes.

• Review ingredients to meet customer needs and requirements.

• Review methods to improve quality of new food products and compliance with food regulations during mass production.

• Suggest alternative ingredients and food preparation processes to meet mass production and compliance needs.

• Suggest changes to new food production processes.

• Support sales team by preparing samples for local and overseas customers.

• Troubleshoot production processes to resolve production, quality and regulatory compliance issues.

Requirements and Qualifications

• Strong knowledge of food science and nutrition.

• Excellent culinary skills and creativity.

• Ability to work well under pressure.

• Strong communication and presentation skills.

• Detail-oriented with strong organizational skills.

• Ability to conduct thorough research.

• Proficiency in using kitchen equipment and tools.

• Knowledge of food safety regulations.

• Ability to work independently and as part of a team.

• Strong problem-solving skills.

• Willingness to stay updated on industry trends.

• Experience in training and mentoring staff.

• Ability to source and evaluate new ingredients.

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

EnviroDynamics Solutions (EDS) is a local executive search and recruitment service firm, devoted to finding ideal matches for companies in various industries. We are looking for a Corporate Development Executive to join and support our expanding team for growth.

Summary :

This role is a versatile and experienced professional who supports the marketing and human resources departments in a variety of tasks. This includes managing social media channels, creating content, developing personal branding materials, providing administrative support, and assisting with recruitment, onboarding, and payroll.

Essential Duties and Responsibilities:

HR functions :

• Provide administrative support in daily HR operations functions.
• Assist in recruitment, arranging interviews and selection, sending of contracts to various Business Units.
• Manage the onboarding and offboarding process.
• Maintain employee records in HRIS system.
• Support in payroll management and processing

Marketing functions :

• Manage the company's website and social media channels to ensure a cohesive online brand identity.
• Curate content such as festive postings, live jobs posting, and useful tips for jobseekers across social media channels.
• Design personal branding pamphlets for colleagues' business development purposes.
• Publish monthly web content on the company's blog.

Qualifications:

• Diploma or Bachelor's degree in marketing, communications, or a related field.
• 2+ years of experience in marketing and/or HR.
• Strong writing and editing skills.
• Experience with social media marketing.
• Proficient in Microsoft Office Suite.
• Ability to work independently and as part of a team.
• Excellent communication and interpersonal skills.

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

EnviroDynamics Solutions Pte Ltd

Reg. No: R1324803

EA License No.: 12C6285

We are a market leader in the field of architectural acoustics.

Currently we are recruting for a suitable candidate that have interest in building design or interior design that can help ask to market our range of products and services to the building industry.

Candidate with knowledge in autoCAD, Sketchup and can do technical write-ups will be advantageous.

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople

· Developing goals for the development team and business growth and ensuring they are met.

· Training personnel and helping team members develop their skills.

• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role
• Proven sales track record
• Experience in customer support is a plus
• Proficiency in MS Office and CRM software (e.g. Salesforce)
• Proficiency in English
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• BSc/BA in business administration, sales or relevant field
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction

• Conduct research to identify new markets and customer needs

• Arrange business meetings with prospective clients

• Promote the company’s products/services addressing or predicting clients’ objectives

• Prepare sales contracts ensuring adherence to law-established rules and guidelines

• Keep records of sales, revenue, invoices etc.

• Provide trustworthy feedback and after-sales support

• Build long-term relationships with new and existing customers

• Develop entry level staff into valuable salespeople

• Developing goals for the development team and business growth and ensuring they are met.

• Training personnel and helping team members develop their skills.

• Finding and developing new markets and improving sales.

• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role

• Proven sales track record

• Experience in customer support is a plus

• Proficiency in MS Office and CRM software (e.g. Salesforce)

• Proficiency in English

• Market knowledge

• Communication and negotiation skills

• Ability to build rapport

• Time management and planning skills

• BSc/BA in business administration, sales or relevant field

• The ability to work under pressure.

• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Job Title: Business Development Executive

Location: Jurong East

Company Overview:
We are a leading company in the renewable energy sector, specializing in the manufacturing and supply of high-quality cables, devices, and accessories designed to support electric vehicle (EV) charging infrastructure. Our mission is to drive sustainable energy solutions and contribute to the growth of clean technologies.

Role Overview:
We are seeking a highly motivated and results-driven Business Development Executive to support our company's growth initiatives. The ideal candidate will play a key role in identifying new business opportunities, building strong relationships with potential clients and partners, and contributing to the expansion of our market presence within the renewable energy sector. This position is perfect for an individual with a passion for clean technologies, strong sales acumen, and the ability to thrive in a fast-paced environment.

Key Responsibilities:

Business Development & Sales:

• Identify and generate new business opportunities in the renewable energy and electric vehicle charging infrastructure sectors.
• Build and maintain strong relationships with key clients, potential partners, and stakeholders to drive business growth.
• Lead market research and competitor analysis to identify trends, opportunities, and potential threats within the industry.
• Develop and execute sales strategies to achieve revenue targets and expand market share.
• Prepare and deliver compelling sales presentations, proposals, and product demonstrations to potential clients.
• Negotiate and close business deals, ensuring mutually beneficial agreements.

Client Relationship Management:

• Maintain ongoing relationships with existing clients to ensure high levels of customer satisfaction and repeat business.
• Act as the primary point of contact for key accounts, addressing any inquiries, resolving issues, and ensuring the successful delivery of services.
• Work closely with the Sales and Service teams to ensure alignment in meeting customer requirements and expectations.

Marketing & Strategy:

• Collaborate with the Marketing team to develop and execute promotional campaigns and initiatives to increase brand awareness and generate leads.
• Monitor industry trends and provide insights into potential product offerings or services to meet market demand.
• Assist in the development and execution of strategies for entering new markets and verticals.

Administrative & Reporting:

• Maintain accurate records of all sales and business development activities, tracking progress against targets and KPIs.
• Provide regular reports to senior management on sales performance, market trends, and key opportunities.
• Assist in the preparation of detailed sales forecasts and reports to support business decision-making.

Qualifications & Skills:

• Bachelor's degree in Business Administration, Marketing, Engineering, or a related field.
• Proven experience in business development or sales, preferably within the renewable energy, EV charging, or technology sectors.
• Strong understanding of the renewable energy industry and market dynamics.
• Excellent communication, presentation, and negotiation skills.
• Ability to build and maintain relationships with clients and partners.
• Self-motivated with a results-oriented approach to meeting sales targets.
• Strong organizational and time-management skills with the ability to handle multiple priorities.
• Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint) and CRM software.
• Knowledge of relevant industry regulations and standards is a plus.

Additional Considerations:

• Experience within the renewable energy or EV charging infrastructure industry is an advantage.
• A passion for sustainability and clean technologies is highly desirable.

RESEARCH AND DEVELOPMENT CHEF Job description

The Research and Development (R&D) Chef creates new recipes to improve food product from the organisation. Ready to designs new recipes in consideration of ideas and market demand for new products. Ready to improves recipes and preparation methods to meet mass production and regulatory needs. Ready to helps to design marketing strategies based on candidate approach and ideas in creating new products.

Candidate should skilled in culinary arts and is experienced in the Food and Beverage (F&B) sector. Candidate works in a kitchen or laboratory. Candidate has good knowledge on food science and is familiar with nutrition and mass production needs. Candidate has sound understanding of cultural and culinary trends. Candidate is very creative in developing and presenting products.

Duties and Responsibilities

• Assist in data gathering for new product specifications.

• Confirm product formulations and other information for constructing product profiles.

• Create new recipes and refine taste profiles through experimentation.

• Develop ideas from food preparation processes for marketing purposes.

• Develop product improvements based on sensory testing and consumer data.

• Establish product specifications and documentations.

• Make recommendations in the design of new manufacturing processes or to change current equipment or processes.

• Modify new product recipes and ingredient selection while taking note of nutrition, shelf life and regulations.

• Plan, manage and run panel sessions and sensory tests on food products.

• Refine recipe formulation for mass production purposes.

• Review ingredients to meet customer needs and requirements.

• Review methods to improve quality of new food products and compliance with food regulations during mass production.

• Suggest alternative ingredients and food preparation processes to meet mass production and compliance needs.

• Suggest changes to new food production processes.

• Support sales team by preparing samples for local and overseas customers.

• Troubleshoot production processes to resolve production, quality and regulatory compliance issues.

Requirements and Qualifications

• Strong knowledge of food science and nutrition.

• Excellent culinary skills and creativity.

• Ability to work well under pressure.

• Strong communication and presentation skills.

• Detail-oriented with strong organizational skills.

• Ability to conduct thorough research.

• Proficiency in using kitchen equipment and tools.

• Knowledge of food safety regulations.

• Ability to work independently and as part of a team.

• Strong problem-solving skills.

• Willingness to stay updated on industry trends.

• Experience in training and mentoring staff.

• Ability to source and evaluate new ingredients.

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

Job Description:

• Learning and Familiarising oneself with various systems and processes within the Company
• Replying to sales enquiries
• Vendor management
• Working on projects to drive both topline and bottomline of the Company
• Assisting your direct or lateral reports on other facets of the business as required.

Job Requirements:

• Singaporeans only
• Candidate should possess knowledge of basic business concepts
• Job role required to liaise with customers in english, chinese and chinese dialect, knowledge of English, Mandarin Chinese and Chinese Dialect is essential.
• Required Skill(s): Microsoft Office

Qualities Sought After:

• Must be resourceful
• Must be able to work effectively and efficiently as an individual or in a team
• Must be able to be hands-on, to learn operations in the initial phase
• Must be inquisitive and be a quick learner and must not shy away from seeking clarification when appropriate to do so
• Must be able to infer basic concepts learned from one scenario to be applied to other scenarios
• Must be able to think and present ideas logically, analytically and rationally
• Must be able to multitask to meet deadlines over multiple projects
• Must be able to handle both mundane and complex tasks over a protracted period
• Must be on a constant lookout to improve oneself or processes within the company
• Educational Qualifications is a plus but not essential. Work ethics and attitude prevails
• Must have a pleasant disposition and be able to carry oneself appropriately in normal settings or in formal meetings with senior business leaders

Responsibilities:

• Lead and manage the system development and support team
• Ensure the successful implementation and integration of systems built with Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI
• Oversee service requests, incident management, problem management, change requests, and projects
• Collaborate with various departments to ensure smooth operation and compliance with industry regulations
• Provide technical expertise and guidance to the team
• Conduct regular performance reviews and provide feedback to team members
• Stay updated with the latest industry trends and technologies
• Determine business needs via consultation, business analysis, and targeted observations.
• Supports business and operational needs such as audit and compliance.
• Coordinates elements of a project to achieve timely completion within budget and high standards.

Requirements:

• Bachelor of Bachelor or above degree in Computer Science, Information Technology, or similar preferred.
• Minimum 5-10 years of experience in system development and support.
• Extensive knowledge of Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Excellent analytical and problem-solving abilities.
• Strong communication and interpersonal skills.
• Experience in making effort & duration estimates based on requirements, design, testing, and implementation including data mapping, and interface is added advantage

Our Address And Working Hours:

Seatrium (SG) Pte. Ltd.

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITIES

• Sales Representative is the direct interface to the customer, responsible for coordination of all activities and projects with customers.

• Analyzing and developing the customer base including segmentation, identifying potential and specific needs.

• Develop and implement renewable project sales strategy and account plan with the customers and influencers in the defined regional area.

• Develop new projects and maintain strong relationships with key influencers, authorities, and business associations in the renewable energy business.

• Identify market segments for sales opportunity and Marketing to generate demand to maximize result. New customer acquisition in within your responsible region.

• Coordinates the assigned project sales activities and implements all activities related to projects.

• Responsible for customer and end-user relations/ Relationship management

• Design customer specific solutions and & offers.

• Sales Negotiation and Selling. Reach at least set turnover targets under consideration of resources and ideal customer mix.

• Ensure that the customer's need for solutions, quotation and products are met promptly.

• General project sales skills in Cable or Renewable energy industry.

Requirements:

• Preferred 1-2 years' work experience in the sales or technical sales position. Fresh graduate can be consider.

• Proven record in sales/ marketing/ business development in Cable or Renewable energy industry is preferred.

• Excellent problem-solving skills, customer service and communication skills.

• Good command of English & Mandarin.

Our Company:

• Marketing Consultancy
• 5 Days, Office Hours
• Pioneer
• AWS + Company Benefits + Flexible Work Arrangements

Job Description:

• Conduct market research to identify potential clients and understand industry trends.
• Manage internal and external entity projects
• Develop and implement strategies for generating new business leads.
• Utilize various channels (networking, cold calling, social media, etc.) to identify and approach potential clients.
• Engage with prospective clients to understand their marketing needs and present tailored solutions.
• Negotiate contracts and close deals to meet or exceed sales targets.
• Build and maintain strong relationships with existing and potential clients.
• Work closely with the marketing, creative, and account management teams to ensure client needs are met

Requirements:

• Minimum 1-2 years’ experience in Business Development or Sales.
• Proficient in English

Join us if you're passionate about content creating, join our team and help small businesses thrive in the digital world, please submit your resume & portfolio.

We look forward to hearing from you!

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided