Electronics/electrical/computer Engineer/Technician with at least 3 years of experience with:

1. Operating measurements equipment (DVM, Oscilloscope, etc.), electrical and electronic equipment.
2. Maintenance of electronic systems including the ability to analyze and repair faults.
3. Communication systems, especially RF systems - an advantage.
4. Military testers/systems (in the military service or working for defense companies such as STE) - an advantage.
5. Operation or maintenance of the Air Defense systems - an advantage.

The candidate must have:

1. Good interpersonal communication
2. Ability to work independently and in a team
3. Ability to have close interface with the customer and the end user
4. Nationality - Singaporean

The candidate will undergo appropriate training by the company

Please contact Lailing (Office Manager) @ 87336339; email: [email protected]

The incumbent will be responsible for design and optimize electrical and electronic systems for advanced laser products, develop, analyze and test circuits for laser systems, including power supplies, control units, and signal processing components.

Requirements:

• A bachelor's degree in electrical & electronics or its equivalent
• Relevant experience in electrical circuit and layout design, using Altium Designer, Cadence or similar tools

Interested candidates, please forward your most updated resume to [email protected]

About the Role

• To Manage and Lead the Team to carry out planned preventive maintenance, corrective maintenance, and repairs as instructed by Manager.
• To provide support for events that are held in these facilities.
• To plan and effectively carry out Scheduled Facilities Planned Maintenance with 100% completion.
• To carry out site verification and provide related scope of work for inhouse / external vendors for recommendation and quotation.
• To work with Project Main contractor to address builder’s defects pertaining to the building and MEP system.
• To follow up all related administrative operation for PR/ PO for vendors to carry out the necessary rectification work.
• To ensure and follow up all necessary statutory certification / license renewal for all related MEP system.
• To ensure all MEP Plant Room system are in functional operation at all times.
• To coordinate and liaise with Venue Ops for all MEP system PM work timeline accordance to schedule.
• To collate and evaluate all reactive cases assigned by Manager and carry out necessary rectification or temporary repair/fix (when necessary) within a stipulated time.
• To assist the Manager to follow up on outstanding issue and case.
• To be activated at all-time 24/7 for any related urgent issue arise.
• To respond instantly and brief the team; in the event of an emergency, notify appropriate personnel and follow safety protocol.
• Ability to work independently without supervision from Manager.
• To actively lead the team in the absence of the Manager.
• To verify and conduct trending of all related MEP system in view for energy and water efficiency.
• To ensure operation of MEP equipment and events assign are 100% operational readiness.
• To assist the Manager for coordination in all events or issues assigned
• To coordinate and liaise with Manager in monitoring and controlling expenditures within the budget allocated.
• To acquire the knowledge of Microsoft Office to prepare and submit weekly and monthly document work and report.
• To ensure the team adhere to all workplace safety requirement.
• To lead and provide training to the team for all the MEP system on site.

About You:

• Nitec with Engineering or Facilities Management.
• Candidates with relevant prior work experience will be preferred.
• Strong team player with good interpersonal and communication skills.
• Able to works under minimal supervision, perform under pressure, proactive.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status.

We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

Job Requirements:

• Degree/ Diploma in Computer Science/IT, Engineering or equivalent.
• Must have 8 – 10 years in IT Security and 3- 5 Cybersecurity experience, responding to IT Security incidents/ monitoring.
• Must have minimum 3-5 years of experience in Cloud Infrastructure services for Amazon, Ali cloud or Google including Cloud Security.
• Mandatory experience in full life cycle of Incident Handling with minimum 3-5 major incident handling, reporting and resolution.
• Good to have GIAC Certified Incident Handler (GCIH), GIAC Certified Intrusion Analyst (GCIA) or GIAC Certified.
• Good to have experience in security tools SIEM, EDR, SOAR, UEBA, VA etc.
• Must have experience in internal / external stakeholder management.
• Excellent Written and Verbal Communication Skills.
• Ability to Work Independently

(A) Job Summary:

The Building Engineer assists the Assistant Manager, Project in the project and construction management of dwellings, factories, commercial and other types of buildings and/or construction.

(B) Essential Job Functions:

• The Building Engineer is responsible, but not limited to, the following:
• Interprets plans, estimate costs and quantities of materials required.
• Assists in the development of Temporary Works’ Plan, design and drawings for construction projects.
• Assists in the tender process by providing technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Assists in the preparation and assessment of cost estimates and the documentation for tender/ contract bids.
• Develops and studies architectural and engineering drawings to ensure that all specifications and regulations are followed.
• Liaises with architects, engineers and other technical colleagues to ensure that the design intentions are met.

(C) Minimum Qualifications/ Job Experience:

• A Bachelor’s Degree in Science, Building or Engineering.

(D) Knowledge/ Skills/ Abilities:

• Knowledge of building and structural details, working drawings and local construction practices.
• Knowledge of local regulations and engineering standards.
• Good verbal and written communication skills.
• Good organizational and interpersonal skills.
• Able to work independently and as a team.
• Good time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.
• Familiar with tender and bidding processes.
• Familiar with local regulations pertaining to building, construction and safety.

GENERAL OVERVIEW

The incumbent reports to the Information Systems Manager and will provide 1st level helpdesk and end user support and assist in the 2nd level support for infrastructure services. He/She will also perform daily server room operation, site related end user support and also support site related projects.

This position will be based at Jurong Island.

ROLES AND RESPONSIBILITIES

Provide 1st and 2nd level support

• Technical assistance and support for incoming IT Helpdesk and End User desktop queries and problems.
• Laptop/desktop/peripherals hardware and software technical support.
• Windows 7/10, Windows server, file/print/scan services, Outlook/Office 2016, Office365 suite, 2FA, LAN\WAN/Wireless network connectivity, VPN, mobile devices, meeting room audio/video conferencing systems, PABX and basic application troubleshooting.
• Perform PC/Laptop Refresh, Onboarding and off boarding of users and ensure asset inventory tracking is updated.
• Escalate issues to OEM/vendors and follow-up until the resolution of the problem.
• Out-Of-Office-Hours On-Call support.

Systems administration and maintenance

• Provide Wintel server, Active Directory, GPO, WSUS, Software deployment and system administration.
• Liaise with external vendors for any related hardware/software maintenance and services.
• Perform Installation/Configuration/Monitoring/Patching/Upgrades of desktops, servers, operating systems, antivirus, databases and other system related software.
• Participate in disaster recovery testing.

IT governance & documentation

• Involve in regular review and update of infrastructure policies, procedures and system documentation to ensure compliance.
• Plan and conduct end-users training as needed.
• Conduct quarterly IT asset counts.

REQUIREMENTS

1. Degree/Diploma in Electronic/Computer Engineering or Computer Studies or equivalent.
2. Certification in ITIL foundation, Microsoft 365 or MCSA are advantageous.
3. At least 2 years of working experience in IT helpdesk providing 1st level and 2nd level end user desktop support.
4. Strong experience in End user hardware and software technical support, Windows 7/10, Office 365 administration and Active Directory.
5. Experience in networking, storage and database administration.
6. Able to work on a rotating 2nd level Out-Of-Office-Hours support On-Call basis.
7. Knowledge of ITIL operation.
8. Strong analytical skills, ability to work independently and in a team environment.
9. Possesses good attitude, good interpersonal and communication skills.

• Administration experience of Storage Arrays of multiple vendors like EMC, Hitachi and Netapp
• Administration experience of Different Cloud platforms like AWS and Azure.
• Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Experience on AWS Cloud Specific technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi AZ VPC Instances
• Good Understanding of AWS Elastic Block storage(EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Storage performance tuning and troubleshooting.
• Incident management and change management process knowledge.
• Project handling experience from sizing to roll-out, preferably with project management background
  Strong analytical skill, very initiative, good planning & systematic execution

About our Client
An Established pharmaceutical brand has with a longstanding history in the market, having successfully sold its products across Asia for decades. Known for its top-selling medicine in its category, the brand has earned a strong reputation for effectiveness and brand recognition. As the company expands its operations in Singapore, it is committed to innovation, sustainability, and excellence across all areas of its business. Joining the team provides an opportunity to make a significant impact in the pharmaceutical industry during a period of exciting growth.

Position Overview: Senior Procurement Engineer

Responsible for managing the development and execution of procurement strategies and processes that align with the company’s operational goals. This key role ensures the procurement of high-quality materials and services while driving cost efficiency.

The ideal candidate will have excellent negotiation skills and extensive knowledge of the pharmaceutical industry. Additionally, the position includes managing infrequent large expenditure, procuring indirect materials and equipment, engineering consumables, and various services.

Key Responsibilities

• The Senior Procurement Engineer will be responsible for managing procurement activities on large-scale projects, ensuring compliance with budget limitations. This includes overseeing procurement budgets, providing regular expenditure updates, and identifying opportunities for cost reduction. The role also covers the procurement of indirect materials and equipment.
• This position will manage the procurement of technical goods and services, ensuring that they meet project requirements and are delivered on schedule.
• The Senior Procurement Engineer will build and maintain a strong supplier network for equipment, utilities, and facilities, with an emphasis on contract negotiation to drive cost savings while ensuring the quality of supplies.
• The role involves evaluating potential suppliers based on their quality, cost, and reliability to ensure optimal vendor selection.
• The Senior Procurement Engineer will be responsible for drafting, managing, and issuing Requests for Proposals (RFPs), leading contract negotiations to secure favorable terms, and ensuring compliance with regulatory standards and company policies.
• This position requires close collaboration with teams from Engineering, Operations, R&D, Manufacturing, Supply Chain, Quality Control, and Quality Assurance to ensure that procurement efforts align with project timelines and regulatory requirements.
• The Senior Procurement Engineer will lead efforts to optimize inventory levels, minimize procurement costs, and implement continuous improvement initiatives within the procurement function.
• A key responsibility of this role is ensuring that all purchased materials and equipment meet required regulatory and quality standards, including adherence to Good Manufacturing Practices (GMP).

Qualifications

• A degree in Engineering or a related field.
• 6-8 years of experience in procurement engineering, preferably in the pharmaceutical or related manufacturing industries.
• Strong expertise in procurement processes, contract negotiation, and supplier management.
• Familiarity with regulatory requirements and quality standards in the pharmaceutical industry.
• Excellent interpersonal skills to collaborate effectively with internal and external stakeholders in a fast-paced environment.
• Strong negotiation and analytical abilities with attention to detail and a strategic focus on cost savings and operational efficiency.

Company Benefits/Offerings

• Competitive salary and benefits package.
• Opportunities for career advancement, training, and professional development.
• A chance to play a key role in managing critical sourcing decisions and contributing to the company's ongoing success.

HOW TO APPLY:

Interested candidate, please submit your updated resume in MS WORD Format to

[email protected] for a confidential discussion.

Attn: Magdeline Tan (R1104772)

Please indicate the below information in your resume:
• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence. By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

数量测量工程师（Quantity Surveyor Engineer）

Responsibilities

• Source for projects on relevant tender platforms such as Gebiz, Sesami, Ariba & etc

• Handle the tendering such as measurement, sourcing quotation from suppliers and sub-contractor, quantities taking-off and collate price for comparison

• Study, understand & interpret the requirement for tender submission

• Carry out the necessary preparation and arrangement for tender submission

• Prepare and call quotations, including analysing and evaluating for costing of tender

• Ensure completeness and timely submission of tender bid

• Evaluation of price comparison and monitor costing summary

• Assess and submit monthly progress claim, and recommend subcontractor’s monthly progress payment

• Evaluation and certification of sub-contractors' progress payments

• Assist and Advise Project Manager on project administration matters, cost impact for project and etc

• Other quantity surveying related duties as assigned

Requirement:

· Possess Diploma/Degree in Quantity Surveyor/ Civil/ Building Engineering or relevant field of study

· Preferably with 2 years relevant working experience

· Detailed, with excellent problem-solving skills, proactive, good team player and able to meet tight deadline

· Proficient in MS Office skills

Driven by our passion for spreading joy and unleashing limitless creativity in the world of gaming, our goal is to establish a game studio right here in Singapore. Our dedicated focus lies in crafting casual mobile games that deeply immerse players in incredibly enjoyable experiences!

We eagerly welcome humble yet ambitious individuals to join us on this thrilling journey!

Key Responsibilities

• Conduct thorough testing of game builds to identify bugs, performance issues, and inconsistencies.
• Develop and execute detailed test plans and test cases, ensuring all game features are thoroughly tested.
• Document and report bugs clearly, providing detailed reproduction steps and relevant context.
• Perform regression testing to ensure that fixes are effective and do not introduce new issues.
• Collaborate with developers and game designers to communicate findings and verify issue resolutions.
• Provide constructive feedback on gameplay mechanics, user experience, and overall game quality.
• Assist in maintaining and improving QA documentation, processes, and tools.

Requirements

• Extensive experience in game QA, with a strong track record of testing
• In-depth understanding of QA methodologies, testing tools, and best practices.
• Proficiency in bug tracking and test management systems.
• Strong analytical, problem-solving, and communication skills.
• Excellent attention to detail and a passion for delivering high-quality games.
• Familiarity with game development processes and tools (e.g., Unity, Unreal).
• Experience testing games across multiple platforms.

Preferred Requirements

• Experience with casual mobile games
• Knowledge of automation testing and scripting languages
• Familiarity with performance testing and optimization techniques.

Application Instructions

• Please include in your resume, a list of games you have played/ tested extensively, along with the approximate number of hours spent on each. This will help us understand your experience and preferences.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Summary

The Infrastructure and Tools (Cisco AppDynamics) Operations Engineer focuses on the ongoing maintenance, support, and optimization of Cisco Application Performance Monitoring (APM) solutions after their initial deployment. This role requires a deep understanding of Cisco APM tools (AppDynamics) networking, application architectures, and ITIL practices. The engineer ensures the continued health, performance, and stability of the AppDynamics environment and its ability to provide valuable insights into application performance.

Job Scope

Implementation and Configuration:

• Support the implementation of Cisco APM solutions (AppDynamics) for customers

• Collaborate with clients to understand their application environments, business goals, and performance monitorin needs.

• Install, configure, and fine-tune Cisco APM agents and collectors to monitor applications and infrastructure components.

• Integrate Cisco APM with existing monitoring and management tools.

• Define and configure application performance baselines and thresholds.

• Develop custom dashboards and reports to visualize application performance data.

Performance Monitoring and Analysis:

• Proactively monitor application performance metrics (response times, transaction volumes, error rates, resource consumption).

• Analyse performance data collected by AppDynamics to identify bottlenecks, perform root cause analysis on outages, and pre-emptively alert for potential problems.

• Utilize Cisco APM tools to trace transactions, diagnose performance problems, and identify root causes.

• Collaborate with application development teams to optimize application code and infrastructure configurations.

Troubleshooting and Optimization:

• Troubleshoot application performance issues using Cisco APM tools and diagnostic techniques.

• Work with network, infrastructure, and application teams to resolve performance bottlenecks.

• Optimize application performance by tuning application parameters, infrastructure configurations, and network settings.

• Implement performance improvements and validate their effectiveness.

Maintenance and Support

• Develop custom queries and metrics to enhance visibility into key problem areas in customer environments.

• Perform regular maintenance and upgrades of Cisco APM solutions.

• Ensure the availability and reliability of the APM infrastructure.

• Provide technical support to users of the APM tools.

• Stay up to date on the latest Cisco APM features, best practices, and releases.

Documentation and Knowledge Sharing:

• Develop and maintain comprehensive documentation for the APM environment.

• Create knowledge base articles and training materials for users.

• Share knowledge and expertise with other team members.

Responsibilities:

• Support implementation and maintain Cisco APM solutions to monitor critical applications and infrastructure.

• Configure and customize Cisco APM agents, collectors, and dashboards.

• Define application performance baselines, thresholds, and alerting rules.

• Proactively monitor application performance and identify potential issues.

• Analyse performance data and troubleshoot performance problems.

• Collaborate with application and infrastructure teams to resolve performance issues.

• Optimize application performance by tuning application and infrastructure configurations.

• Perform regular maintenance and upgrades of Cisco APM solutions.

• Ensure the availability and reliability of the APM infrastructure.

• Provide technical support to users of the APM tools.

• Create and maintain documentation for the APM environment.

• Stay current on the latest Cisco APM features and best practices.

Requirements

• Bachelor's degree in computer science, network engineering, or a related field.

• 2 or more years of relevant experience with maintaining AppDynamics in a production environment.

• Possesses ACIP (AppDynamics Certified Implementation Professional) certification or can attain within 3 months.

• Has working experience with programming languages (e.g., Java, .NET, JavaScript)

• Strong understanding of large-scale application deployment architecture and challenges in both on-premises and cloudenvironments

• Working experience with other observability industry platforms (Datadog, Dynatrace, etc.) and cloud experience is a good to have.

• Strong analytical and problem-solving skills.

• Excellent communication and interpersonal skills.

• Ability to work independently and as part of a team.

Responsibilities:

• Design and document IT and OT systems for shipboard networks.
• Coordinate and manage IT and OT projects to ensure timely delivery.
• Provide remote and on-site support for IT and OT systems.
• Analyze and resolve IT/OT system design and implementation issues.
• Develop and maintain comprehensive documentation for IT and OT systems.
• Contribute to the implementation of IT/OT governance procedures, including:

1. Reviewing OT system designs for new vessels
2. Evaluating and assessing new OT systems
3. Participating in system integration and user acceptance testing
4. Reviewing VLAN and firewall configurations with vendors and manufacturers
5. Supporting the implementation of cybersecurity projects across vessels
   

Requirements:

• 3-5 years of experience in maritime IT, including shipboard systems (engine automation, navigation, trim/fuel/route optimization, cybersecurity, incident handling)
• Strong knowledge of network design and troubleshooting for marine environments
• Occasional travel for on-site surveys and troubleshooting
• Tertiary qualification in IT networking or Marine Engineering
• Professional certifications (CCNP, NSE 6.0 or higher) preferred
• Strong understanding of cybersecurity best practices

Visit www.ppsjob.com.sg

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare method statements, monthly progress claims and reports.
• Co-ordinate with clients, sub-contractors and consultants.
• Supervise and monitor projects are carried out in accordance to company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meets clients’ regulatory work requirements.
• Ensuring environmental, safety and health practices are carried out at all times.
• Other adhoc duties assigned from time to time.

Requirements:

• Degree in Civil or Structural Engineering recognised by PE Board/ BCA
• 2-5 years experience in Civil Engineering/ road works infrastructure projects
• Experience with LTA project preferred
• Proficient in MS Office and AutoCAD
• Organised, meticulous with positive work attitude
• Able to work independently and a team player
• Good analytical, supervision and communication skills

Other Information:

• Exciting government Civil Engineering projects exposure
• Variable bonuses
• Training opportunities
• Career development progression
• Company medical benefits
• Annual medical check-up
• Mobile phone allowance
• Company insurance

Competitive remuneration package which commensurate with qualifications and experience will be offered to the successful candidate(s).

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Mechanical Engineer
• Working Location: Jurong East
• Working Hours: 5 days (Monday to Friday (9 AM - 6 PM)
• Salary Package: Basic Salary up to $7,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment design, hands-on assembly, testing, troubleshooting, and supporting projects related to jacket flooding systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the O&G industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66240 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Engineering (O&G)
• Position Title: Assistant Engineer
• Working Location: Pioneer
• Working Hours: 5 days (Mon to Fri 8.30AM – 6.15PM)
• Salary Package: Basic Salary up to $2,500 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in the installation, maintenance, and repair of marine equipment and systems, including engines, pumps, and other mechanical components.
• Support senior engineers in conducting routine inspections and diagnostics to ensure optimal performance and adherence to safety standards
• Maintain accurate records of maintenance activities, inspections, and repair work
• Prepare reports and documentation as required for compliance and operational needs
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• NITEC or Diploma in Mechanical Engineering, or a related field
• Knowledge of AutoCAD is an advantage
• Experience in prior O&G companies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71679 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Purpose: To retrieve and analyse data to determine the company's needs and provide support in decision-making.

Key Area of Responsibilities:

• Understand the stakeholders' requirements and assess the technical feasibility of implementing the best solution to achieve the highest added value.
• Develop BI tools such as reports and dashboards for the various process owners and management to meet business needs.
• Develop automation tools/applications or IT-related solutions to improve the efficiency of the various processes in the organization.
• Develop/source and implement new technologies/capabilities to develop more efficient and secured business processes.
• Identify areas where there is an opportunity to significantly improve the efficiency and security of the business processes, and where there is currently no capability or tool available in-house.
• Create user guides and documentation for the various BI and process automation tools, to ensure usability and maintainability.
• Share the solution, including the user guides and documentation, with the Digital Factory Team so that all BI Engineers can use the knowledge for future projects and back up each other.
• Support and participate in company's continuous improvement program.

Qualification & Experiences:

• Degree in Engineering, Science, Business and Finance or other relevant field.
• Minimum 2 years of experience as a business intelligence engineer in the semiconductor industry.
• Certified Business Intelligence Professional (CBIP) will be an advantage
• Knowledge of Lean Six Stigma
• Proficient in advanced Excel functions
• Knowledge of different programming language (Javascript, Python & C#)

Job Responsibilities:

• Establishes networking environment by designing system configuration, directing system installation, defining, documenting, and enforcing system standards
• Maximizes network performance and optimization by monitoring performance, troubleshooting network problems and scheduling upgrades when necessary
• Oversee maintenance of all IT system in line with IT security policy
• Secures network system by establishing and enforcing policies, defining and monitoring access
• Ensure project tasks are completed on time and project goals are achieved

Relevant experience:

• 1-2 years of experience in network engineering, administration, or related roles

Basic skills required:

• Diploma / Bachelor degree in IT related field
• Strong understanding of network protocols (Eg: TCP/IP, DNS, DHCP, BGP, OSPF)
• Knowledge on LAN/WAN networking, network design, problem solving, network hardware configuration and project management
• Familiarity with cloud networking (AWS, Azure, Google Cloud) is a plus
• Knowledge of network security best practices and tools
• Excellent problem-solving and analytical skills
• Responsible, resourceful, customer oriented and an independent player

Job Description

• Extensive experience required in data migration and in leading Esri product upgrade projects
• Experience in Spatial DB design, querying databases.
• Understanding on database queries with PL/SQL, SQL, Oracle

Requirements

• Good Communication skills and client interaction with the team.
• Good knowledge on Business analytical skills and understanding requirements.
• Experience in Esri ArcGIS Server services and GeoProcessing services development
• Experience in Spatial DB design, querying databases, building descriptive and cartographically sound maps
• Expertise in development using ASP.NET MVC, C#.NET, MSSQL, Web services, Windows services, MVC Web API.
• Extensive experience required in Spatial data migration and in leading Esri product upgrade projects
• Strong experience in working as a GIS subject matter expert in setting up a vision for GIS practice
• In depth understanding RDBMS, geodatabase design, multiuser editing ArcSDE Administration.

EA Number: 11C4879

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Sales Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $5000
• Duration: Permanent

Key Responsibilities

• Build and strengthen strong relationships with existing customers to ensure positive rapport and long-term business partnerships.
• Pursue and nurture new business opportunities by following up on potential leads.
• Stay informed on market trends, industry shifts, and evolving customer needs to collaborate with the BD Manager in refining sales strategies.
• Coordinate projects effectively with the Project Manager and key stakeholders to ensure smooth execution.
• Engage in supplier collaborations to stay updated on the latest applications and technological advancements

APPLY NOW!!!

• Min. Engineering related Diploma/Degree
• Minimum of one (1) year of relevant work experience.
• Training provided for candidates without experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70611 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

We are seeking a motivated Semiconductor Engineer with a strong focus on Manufacturing Execution Systems (MES) to support and enhance our semiconductor production operations. In this role, you will work closely with the manufacturing team, IT, and other cross-functional teams to implement, maintain, and optimize MES systems that track and monitor production processes in real-time. You will be a key player in improving operational efficiency, data accuracy, and production quality.

Key responsibilities:

• Implementation & Maintenance.Troubleshoot and resolve any issues related to the MES, ensuring minimal disruption to production operations.
• Analyze and improve manufacturing processes using MES data to identify bottlenecks and inefficiencies.
• Collaborate with process engineers and production teams to implement process improvements based on real-time data.
• Ensure accurate and timely data collection from the MES for production tracking, quality assurance, and inventory management.
• Generate and analyze reports to provide insights into production trends, equipment utilization, and yield performance.
• Provide technical support for the MES system during daily production activities, ensuring smooth and efficient operation.
• Work with production teams to ensure proper system use and training on MES functionalities.
• Lead efforts for system upgrades and improvements, ensuring the MES stays current with technological advancements.
• Collaborate with software vendors and internal IT teams to evaluate and implement new MES features or modules.
• Support quality assurance initiatives by ensuring that MES tracks and reports key metrics for product quality and compliance.
• Assist in root cause analysis when defects or quality issues arise, utilizing MES data to aid investigations.
• Collaborate with cross-functional teams, including IT, process engineers, and production managers, to align MES features with operational needs.
• Provide technical expertise to help streamline operations, improve manufacturing yield, and enhance productivity.

Key requirements:

• Bachelor’s Degree or Diploma in Engineering, Information Technology, Computer Science, or a related field.
• Previous exposure to any of the commercial MES systems is a plus
• Previous experience in the management of IT applications connected to external systems
• Previous experience in the management of shop-floor devices (tablet, barcode scanners, label printers) in a cleanroom / sterile environment
• Ability to troubleshoot and resolve hardware and software issues.
• Working knowledge of Windows operating systems
• Understands cGMP principles and requirements.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Proven system requirements elicitation and documentation skills.

Job Description:

• Responsible for ensuring the availability and reliability of multiple data centers to meet IDC operational requirements.
• Conduct daily inspections of servers, switches, power environments, etc., to maintain a good operating environment in the data center and provide feedback data.
• Install, maintain, and troubleshoot server equipment in the data center, including hardware installation, maintenance, and fault handling.
• Responsible for data center equipment migration and server system installation and configuration, such as Windows/Linux systems.
• Assist in troubleshooting CentOS and other Unix-like systems, identify and resolve faults, and provide timely feedback on issues.
• Troubleshoot and resolve data center network equipment and switch failures, such as switch replacements and link failures.
• Promptly respond, provide feedback, and follow up on troubleshooting for daily issues and emergency incidents.
• Responsible for adjusting and arranging the physical links in the data center, such as fiber optics, Ethernet cables, and power cables.
• Conduct regular inspections, maintenance, replacement, and repairs of all servers and spare parts in the data center.
• Provide various daily reports on time and be available for alternating day and night shifts.
• Support spare part inbond and outbond in Warehouse

Job Requirement:

1. Diploma/Bachelor’s degree or above in Engineering, Computer Science, Information Technology, Security, or equivalent;

2. Proficient in Chinese and English to liaise with clients from China;

3. 1-3 years of IT experience; outstanding fresh graduates are totally welcomed;

4. Provide 24/7 alternating support for day and night shifts, with each shift lasting 12 hours, totaling 3 or 4 shifts per week.

ABOUT MONEYTHOR

Moneythor is an award-winning software company founded in 2013. We provide banks and fintech firms with a modern toolkit to enhance their digital banking services with the prime focus of generating data-driven personalised and contextual recommendations for their customers.

Since inception, Moneythor has set a mission for itself to make digital financial services more relevant, more personal and to wipe out the myth that you cannot get great financial insights when you visit your financial institution online.

Moneythor is headquartered in Singapore and with presence in Dubai, London, Paris, Sydney, Tokyo, and further expansion in progress. Our solution is currently used by financial institutions globally.

Overview:

Are you a driven professional with strong technical capabilities and storytelling skills who is looking to excel in enterprise sales? Do you believe that a great Pre-Sales Engineer can significantly enhance the sales process and drive better outcomes for our clients? If yes, then we want to hear from you!

Moneythor is currently seeking a talented Pre-Sales Engineer to join our Singapore-based team. In this role, you'll collaborate closely with Account Executives to navigate strategic deals through complex sales cycles. You'll shine in solution selling, financial modelling, delivering impactful presentations and product demos, managing technical & functional aspects of RFP/RFI responses, conveying client requirements to R&D teams, and gathering competitive intelligence. Your contributions will play a vital role in driving new customer acquisition, enhancing customer satisfaction, and lifting overall sales team performance.

This role is based out of our Singapore HQ, where we work in a hybrid (onsite and remote) model.

Role Summary:

As a Pre-Sales Engineer, your responsibilities include understanding client needs, designing robust scalable solutions, and delivering compelling proposals. You'll need a solid grasp of enterprise software and cloud technologies, effective communication skills, and the ability to collaborate with both technical and non-technical stakeholders. Your role involves presenting to diverse audiences, from lower-level influencers to high-level decision-makers, adjusting technical depth to suit each audience's needs.

Key Responsibilities:

• Provide pre-sales technical expertise through product presentations, demonstrations, and ongoing consultation.
• Drive adoption of our solutions within strategic accounts, translating technical features into value drivers.
• Develop and deliver materials to improve product knowledge among the sales teams and partners. Maintain up-to-date knowledge about our solution and competitor landscape to help craft effective sales strategies.
• Act as a reference point during pre-sales activities, showcasing in-depth technical & functional knowledge of our solutions.
• Respond to product inquiries and liaise with the solution & engineering teams as required.

Additional Role Breakdown:

1) Product Pre-Sales Consulting:

• Provide technical & functional direction and consulting to prospects and/or partners as part of the pre-sales process.
• Apply standardized approaches to contribute to commercial proposals.
• Maintain a broad understanding of the market to identify additional opportunities.

2) Product Demonstrations:

• Ensure out-of-the-box demonstration environments are available and tailored to client needs.
• Establish demo datasets and scripts for efficient responses to client inquiries.
• Innovate by creating advanced demonstration sets tailored to unique client requirements.

3) Product Innovation and Continued Expertise:

• Develop a learning path to deepen expertise in solution functionalities.
• Contribute to innovation efforts by understanding market trends and competition.
• Act as a liaison between sales and product teams for continual product improvement.

4) Product Bid Response Efforts:

• Lead RFP/RFI response efforts, collaborating on technical & functional responses and commercial proposals.
• Provide recommendations for proposal improvements and bid management strategies.
• Attend sales debriefs to provide feedback on the sales cycle and client engagement.

Requirements:

• 4+ years of solution engineering or pre-sales experience in SaaS/enterprise software sales.
• Proficiency in server-side technologies, data management as well as HTML, CSS, JavaScript, and SQL.
• Strong understanding of SaaS/enterprise software technical aspects, including integration, security and scalability.
• Excellent written and verbal communication and presentation skills in English, with the ability to engage effectively with various levels of internal and external stakeholders.
• Willingness to travel (<25%).

Job Description

• Industry/ Organization Type: Electrical Equipment Manufacturer/ Production
• Position Title: Technical Support Engineer
• Working Location: Ubi
• Working Hours: Monday to Friday, 8.30 am – 5.30 pm; Saturday 8.30 am – 12.30 pm
• Salary Package: Up to $5,000 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to customers for UPS, DC Systems, and Battery installations, commissions, repairs, and maintenance.
• Coordinate with end-users on-site to ensure smooth installation, commissioning, and maintenance activities.
• Collaborate with customers and engineers to ensure safe execution of site work.
• Deliver training to customers on the startup and operation of UPS and DC Systems.
• Monitor and follow up on maintenance contracts to ensure work is completed promptly.

APPLY NOW!!!

• Minimum Diploma in Electrical/ Electronics Engineering or its equivalent.
• At least 3 years of relevant experience in the UPS and DC power industry.
• Willing to travel across Asia on short notice.
• Immediate availability and own transport required.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781