Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

MES Engineer/ IT Engineer/ Manufacturing IT

*Permanent Position

*Working Hrs: Mon- Fri 8.15am - 5.45pm

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Gather business requirements and evaluate shop floor automation solutions.
• Lead the implementation and optimization of MES systems to enhance production planning and execution.
• Configure and integrate MES with other plant systems, such as ERP and PLCs.
• Collaborate with vendors to develop and implement MES modules for data collection, analysis, and reporting.
• Coordinate with stakeholders and conduct testing (SIT, UAT).
• Provide system monitoring and support, system backup, including troubleshooting, configuration, and issue resolution.
• Perform systems and user administration.
• Provide training to end-users on MES, create and maintain documentation
• Develop and implement digital solutions to improve operational efficiency
• Lead and manage digitalization projects
• Provide technical support for production PCs, workstations, and network devices.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 2- 5 years of practical experience in MES implementation, configuration, and support, preferably in a manufacturing setting.
• In-depth knowledge of MES systems and their functionalities.
• Experience with industrial automation and control systems (PLCs, SCADA).
• Skilled in programming languages (e.g., SQL, Python, C#) and scripting.
• Experience in project and vendor management.

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Responsibilties

• M&E works with coordination interfacing with Architectural / Structure
• Monitor job progress and ensure that M&E contracted works meets all practical, commercial, requirements of productivity, quality and contract target completions;
• Ensure all M&E work is carried outwithin established budgets and schedules;
• Liaising with consultant to ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external M&E contractors well to ensure quality of work and scope of work is within specifications.
• To M&E coordinate with subcontractors/suppliers to execute contract works.
• Responsible for all inspection activities being carried out.
• Handling administrative work, site inspection and safety matters on site
• Assist in M&E planning, schedule and technical support to M&E Manager
• Assist for submission,evaluation of progress claim, variation work to M&E Manager

Requirements:

• Degree in Mechanical Engineering / Electrical Engineering
• At least 3 years working experience in construction site environment
• Possess good interpersonal skills and excellent team spirit

The technician is responsible to manage the electrical powering system and functional interfaces with other systems and support the maintenance of the entire power cabling system/physical integration and defining electrical components. He/She also validate the functional behaviour of the Control/Command system on train level. He/She support the testing team to regularly test and validate the functionality of the Control/Command on train level through specific maintenance program.
~ Assist the train reliability manager to implement containment and counter-measures on identified key reliability failure modes.
~ Conduct functional analysis and review the power generating circuit and sub-systems to ensure reliability and safety.
~ Control and monitor all the electrical motors, traction and other electrical equipment performances within the trains.
~ Determine the maintenance and repair of the existing electrical systems, motors and equipment.
~ Establish control standards and procedures to monitor the performance of electrical generating and distribution systems, motors and equipment.
~ Implement customer satisfactions improvements and friendly train presentation.
~ Manage the electrical powering system based on the electrical and functional architecture requirements.

Benefit:

• Basic up to $3000
• 5 Days Work
• Industry : Engineering
• Location: West

Job Scope:

• Operate and monitor production equipment to ensure efficient operation.
• Perform routine maintenance and troubleshoot machinery issues.
• Conduct quality checks to ensure products meet specifications.
• Maintain cleanliness and safety in the production area.
• Follow standard operating procedures (SOPs) and production schedules.
• Record production data and report any deviations or issues.
• Collaborate with team members to meet production targets.

Requirement

• Candidates with Production Technician/Manufacturing or ANY related experiences are welcome to apply
• Possesses knowledge of TPM and procedure of TPM maintenance work

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Cheang Wei Yang (R21102313)

POSITION OVERVIEW : Data Engineer cum PM(Dual Role)

POSITION GENERAL DUTIES AND TASKS :

Role and Responsibilities

a) Involve in various stages of the systems development life cycle; adopting waterfall, agile or hybrid development methodology. b) Involve in project planning and budgeting. c) Plan and lead project delivery. d) Involve in procurement (e.g. Call RFP/ITQ, evaluate and award to selected vendor). e) Manage and work closely with various stakeholders (e.g. end users, senior management and external vendor). f) Conduct user requirement gathering sessions for the development / implementation of new system or enhancements to existing systems. g) Manage project implementation, application testing, supporting application patches and upgrades are in accordance with project methodologies and policies. h) Manage project based on the project plan and timeline to meet identified business needs, within agreed parameter of cost, duration and quality. i) Mitigate project risks. j) Understand IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines. k) Evaluate potential solutions and make recommendations to resolve business problems. l) Provide guidance and coaching to junior team members. m) Conduct end user training if required.

Requirements / Qualifications a) Degree/Master in Computer Science, Information Technology, Computer Engineering or equivalent. b) Seven (7) years’ experience in providing data warehouse or advanced analytics solutions. c) Minimal Four (4) years’ experience in project management. d) Thorough understanding of data warehouse concepts, dimensional design, and advanced analytics techniques. e) Experience in any Data Management, Business Intelligence or Advanced Analytics tools. f) Ability to manage/influence users, vendors and coordinate with multi-disciplinary teams. g) Strong analytical skills and ability to work independently, as well as in a team. h) Exposure to hospital information / clinical systems is an added advantage. i) AWS cloud experience is a must. j). Experience in Tableau Cloud, Informatica IDMC and Databricks projects is preferred.

Preferred Skills: • Experience in AWS Services focusing on data and architecting. • Knowledge of containerization and orchestration tools like Docker and Kubernetes. • Familiarity with data visualization tools like Tableau or Power BI. • Understanding of DevOps principles for managing and deploying data pipelines. • Experience with version control systems (e.g., Git) and CI/CD pipelines. * Knowledge of data governance and data cataloguing tools, especially Informatica IDMC.

Basic Job Purpose

• Manage project planning and implementation of construction and medical gas projects.
• Provide service and repair, commissioning and installing gas supply and machines, and maintenance of plant equipment.

Duties and Responsibilities

• Plan, organize and execute all assigned engineering work.
• Ensure all engineering work and maintenance of gas supply facilities and related equipment run smoothly.
• Perform project system design, planning, cost estimation and presentation.
• Prepare technical drawings.
• Perform monthly maintenance and engineering reports.
• Provide in-house technical training to staff.
• Evaluate and source for materials, sub-contractors and suppliers.
• Understand and comply with government regulations.
• Attend to all emergencies at all times.
• Perform off-duty standby backup work.
• Ensure that work done is being carried out according to standard working
• procedures.
• Observe and ensure safe working conditions.
• Perform any other duties assigned by the superior

Qualifications and Skills

• Degree/Diploma in Mechanical/Electrical/Electronic/Mechatronic/Engineering
• Experience in the gas industry or experience with medical gas system
• AutoCAD knowledge is a must
• Meticulous and analytical.
• Business acumen and Finance savvy.
• Detail-oriented and able to work in a fast-paced environment.

Output

• To ensure that engineering planning activities and implementation are met.
• To provide good service and maintenance support.

• Design, deploy, and manage containerized applications and infrastructure to ensure reliability and scalability across development, staging, and production.
• Oversee and configure cloud resources, including compute, storage, networking, and security, to support multi-cloud infrastructure.
• Streamline build, test, and deployment processes to support continuous integration and delivery across multiple environments.
• Enforce security best practices across cloud, CI/CD, and virtualized environments to safeguard applications and data.

Requirements:

• Degree in Computer Science or equivalent.
• Cloud certified
• At least 3 years of relevant working experience
• Proficient in Python or other programming languages for automation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Overview:

Electrical / PLC Engineer to design, implement, and maintain electrical and automation control systems. The ideal candidate will have strong electrical and programming skills and extensive experience with industrial automation systems.

Key Responsibilities:

Design, develop, and implement PLC programs for automated manufacturing systems using platforms such as Allen-Bradley, Siemens, or Beckhoff. Other platforms may also be utilized in the course of your work.

Create and maintain HMI (Human Machine Interface) applications, SCADA systems and MES as required.

Troubleshoot complex control system issues and provide timely solutions to minimize production downtime.

Develop and maintain documentation for PLC programs, including logic flowcharts and technical specifications.

Perform risk assessments and ensure compliance with safety regulations.

Perform calculations, sizing and deployment of LV electrical and control systems.

Inspection, testing and troubleshooting of existing and new systems.

Qualifications:

Bachelor's degree (or Diploma) in Electrical Engineering, Computer Engineering, or related field. Fresh graduates are welcome to apply, experience in Semi-conductor field is an added bonus.

Experience programming PLCs in an industrial environment preferred.

Proficient in ladder logic programming and structured text.

Experience with major PLC platforms. (Allen-Bradley, Siemens, TwinCAT, etc.)

Knowledge of industrial networks and communication protocols.(Ethernet/IP, Profibus, Modbus)

Experience with HMI/SCADA development.

Experience with MES integration and deployment.

Experience with electrical systems and industrial safety standards.

Strong problem-solving and analytical skills.

Strong communication skills.

Working Conditions:

Mix of office and factory floor environment

Will require travel to overseas sites including but not limited to, Singapore, Malaysia, China, India. Existing Visas not required, but is an added bonus.

• Work with users and IT members on a routine basis to troubleshoot reported problems pertaining to application software.
• Identify, log and resolve technical problems of the scope (Incident Management)
• Respond to site to troubleshoot, diagnose and rectify faults.
• Liaise and coordinate the recovery of systems.
• Identify potential changes and system improvements for consideration and implementation
• Create, maintain, and distribute reports of progress to service delivery manager.
• Gather, analyze and assess the client's business requirements and processes evaluate the viability and feasibility of implementing them (including operational and security policies and requirements) and also possible improvements.
• Conduct system functionality testing and work with users user acceptance testing to verify that client requirements are incorporated into the system design
• Support multiple application systems.
• Identify the cause, design, or develop an approach for resolution.
• Communicate and interface with vendors and customers.
• Generate reports and write documentation, e.g. maintenance guide, operation manuals

Requirements

• Degree / Diploma in Information Technology
• Min 3 years of experience with enterprise scale Linux and Windows administration
• Familiar with MySQL, Oracle, and other database servers
• Hands-On experience of .Net framework and Web Services
• Scripting: Windows PowerShell, Unix Scripting will be added advantage
• Able to work well within team and willing to learn
• Good grasp of emerging technology trends
• Start-up focused with an upbeat and enthusiastic attitude

Please send your detailed resume in MS Word format to [email protected] with:

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Key Responsibilities:

1. Design & Implementation:

• Integrate Azure Sentinel with on-premises and cloud-based resources for comprehensive threat visibility.

• Develop and manage Log Analytics Workspaces and data connectors.

2. Security Monitoring & Threat Detection:

• Create and maintain custom rules, alerts, and automation playbooks.

• Analyze security events, identify threats, and provide actionable recommendations.

• Monitor and manage SIEM dashboards for real-time threat intelligence.

3. Incident Response & Management:

• Respond to security incidents and conduct root cause analysis.

• Coordinate with stakeholders to mitigate risks and resolve vulnerabilities.

4. Optimization & Automation:

• Enhance Sentinel performance by optimizing data ingestion and query performance.

5. Documentation & Reporting:

• Develop and maintain documentation for configurations, processes, and incident responses.

• Generate detailed reports on security incidents, trends, and recommendations.

Qualifications & Skills:

• Bachelor’s degree in Computer Science, Information Technology, Cybersecurity, or related field.

• Proven experience with Azure Sentinel, Microsoft Defender, and Azure Security tools.

• Strong understanding of SIEM platforms and security operations.

• Knowledge of KQL (Kusto Query Language) for writing log queries and analytics rules.

• Familiarity with threat detection frameworks like MITRE ATT&CK.

• Experience with incident response, threat hunting, and SOC operations.

• Good degree in Civil / Structural Engineering from a recognized University
• Minimum 5 years working experience in Civil & Structural Consultancy Firm
• Experience in Underground & Bridge structures would be advantages
• Ability to work independently
• Candidates without the relevant working experience but with good academic results may be considered

☑ Basic $ 4500 - $ 5000 Days (Mon – Fri: 08:30am – 5.30pm)

☑ Office Centrally located, Island wide jobsite attended required

☑ Good Benefits + Career Growth

☑ Experience in Fire Protection Project is advantageous!!

Responsibilities:

• Conduct site inspections, gather data, and coordinate with the design team for drawings.
• Verify drawings before construction, addressing customer requirements.
• Coordinate with design team, customers, and subcontractors during construction.
• Inspect and ensure quality work from subcontractors; assist Project Manager in meeting project timelines and safety standards.
• Oversee testing, commissioning, customer training, and final inspections for as-built drawings.

Requirement

• Diploma / Degree in Mechanical Engineering or any related field.
• 1-3years of Project Management experience.
• Knowledge of ISO 9000 standards, problem-solving, and analytical skills.
• Proficient in English, computer skills, and experience with LTA projects preferred.

Interested applicants are welcome to apply online with updated resume to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

Responsibilities:

• Responsible for the design and selection of rotating equipment on EPC projects through the various engineering work phases (i.e. Feasibility / FEED studies and detailed engineering for Offshore, FPSO Projects)
• Plans and directs technical specifications/ standards
• Review all technical requirements incorporated in engineering deliverables.
• Evaluates the technical aspects of bids received from suppliers and concludes technical assessment.
• Assists in placing and executing the orders. Review supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakeholders.
• Oversees the technical and administrative management of the project mechanical team and ensures quality/ schedule of deliverables from the team.
• Provides technical/ engineering support and advice for quality work at site.
• Resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post delivery.
• Ensures business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements:

• Possess Degree in Mechanical Engineering or equivalent
• At least 15 years of relevant work experience, preferably in the Marine Offshore/ Oil & Gas industries
• Conversant with design standards and International Industry Codes such as ASME, API etc.
• Conversant with specifications and requirements for mechanical rotating equipment such as process gas compressors, screw compressor packages, reciprocating compressors, gas turbines, Sea Water injection pumps and requirements of Industry Codes and Standards, Classification Society rules and all relevant regulatory.

Interested applicants are welcome to submit your resume to [email protected]

EA. R1107675

Agency no. 07C3676

• Develop, test, and debug automated tasks (Apps, Systems, Infrastructure)
• Have a solid technical skill with diversity of thought and creative solutions that are in the best interests of our customers globally.
• Lead and participate in performance tests; identify bottlenecks, opportunities for optimization, and capacity demands.
• Troubleshoot priority incidents, facilitate blameless post-mortems.
• Work with development teams throughout the software life cycle ensuring sustainable software releases.
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions.
• Adhere to firm-wide architecture standards, risk management and security policies.
• Team player and ability to work in Global Team setup, product owners and business team to develop, build & support application.
• Communicate and collaborate on development items with global team, as well as raise/work to resolve issues impacting development.
• Participate in quality assurance, peer reviews and code reviews Qualifications.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Good understanding of networking protocols and cybersecurity best practices in public cloud environment
• Advanced working SQL knowledge and experience working with RDBMS, Hadoop, and NoSQL DB.
• Experience performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.
• Experience supporting and working with cross-functional teams in a dynamic environment.
• Strong understanding of DevOps practices, tools, and techniques and experienced deploying application in a containerized environment using Docker/Kubernetes/PCF/Openshift/AWS etc.
• Hand-on experience with cloud-based technologies and tools especially in deployment, monitoring and operations, such as Prometheus, Splunk, Elasticsearch, Grafana

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently looking for a Server Programmer to join our energetic team in Singapore!

Job description

· Work on server or network related tasks that include but not limited to mobile game server architecture design, modular design, game server end program logic development and maintenance efforts

· Develop game services and supporting applications

· Assess, develop, test, debug, and maintain game services

· Propose creative solutions to meet product goals

· Work effectively in cross-functional teams and collaborate with internal and remote teams to identify, produce, and deliver tasks on time

Job requirements:

· Degree in Computer Science or related field

· 3+ years’ experience in the mobile games industry or equivalent

· Experience with all phases of product development lifecycle, including requirement definition, development, testing, releasing of product(s) and live operations

· Expert in C/C++ is a must, familiarity with C++ as server framework is a plus

· Expert on network protocols: Socket programming, TCP, UDP, HTTP

· Solid understanding of distributed systems and micro service development (SOA, SaaS)

· Expert on SQL and relational database operation

· Preferably with understanding of Unity game engine and C#

· Preferably with Git-related experiences

· Preferably with solid understanding of functional and reactive programming

· Preferably with experience in developing mobile games (iOS & Andriod)

· Familiarity with client server data synchronization (e.g. state/frame synchronization) is a plus

· Familiarity with Golang, protocol buffers would be a plus

Job Responsibilities:

Gather software requirements and design solutions for modules and small software systems

Develop and support software including applications, database integration, interfaces and new functionality enhancements.

Coordinate cross-functionally to ensure projects meet business objectives and compliance standards.

Write both internal and external technical documentation

Deploy, install, and configure hardware and software systems

Work with team members in customer support, field test and deployment

Perform bug fixing and improvement of current application framework

Requirements:

Bachelor Degree in Computer Science & Engineering, Electrical & Electronics Engineering, Information Technology, or equivalent

2-4 years of in-depth knowledge and experience in front-end and backend development

Ability to solve complex development problems and produce high-quality code while pushing the technical boundaries.

Proficiency in one or more programming languages; we use Python, Javascript and TypeScript.

Knowledge in frontend frameworks such as React, Next.JS, FastAPI, REST API or similar frameworks.

Experience with Docker/Kubernetes, DevOps, CI/CD, Github

Experience with Linux operating system (Ubuntu, RHEL, etc.)

Experience working on Agile projects and Agile methodology in general

Excellent problem solving, communications, and teamwork skills

Summary:

As an OutSystems Senior Software Engineer, you will be responsible for designing, developing, and maintaining applications using the OutSystems low-code platform. You will work closely with business analysts, project managers, and other developers to translate business requirements into robust, scalable, and user-friendly applications. Your role will involve both front-end and back-end development, integration with existing systems, and ensuring the overall quality and performance of the applications.

Key Responsibilities:

· Design, develop, and maintain applications using the OutSystems platform.

· Collaborate with stakeholders to gather and analyze requirements, translating them into technical specifications.

· Develop user-friendly interfaces, ensuring a seamless user experience.

· Integrate applications with existing systems and third-party services.

· Write clean, scalable, and maintainable code.

· Conduct unit testing and participate in code reviews to ensure high-quality deliverables.

· Troubleshoot and resolve issues in existing applications.

· Stay updated with the latest OutSystems features, best practices, and industry trends.

· Document application designs, processes, and changes

We are looking for a skilled and motivated DevOps Engineer (Azure) to join our project on a 12 months extendable contract basis. You will get an oppourtunity to work on exciting AI projects.

The successful candidate will work on the development, deployment, and continuous improvement of our cloud infrastructure, leveraging Azure DevOps practices and tools. This role will focus on building scalable and reliable infrastructure solutions that support our business applications.

Key Responsibilities:

• Azure Cloud Infrastructure Management: Design, deploy, and manage scalable infrastructure solutions using Microsoft Azure.
• DevOps Automation: Implement automation using Azure DevOps pipelines to automate the build, test, and release processes.
• CI/CD Pipelines: Develop, maintain, and improve Continuous Integration/Continuous Deployment (CI/CD) pipelines for seamless application delivery.
• Cloud Resource Management: Work on Azure resources (e.g., virtual machines, databases, storage) and ensure the infrastructure is cost-effective, scalable, and secure.
• Monitoring & Optimization: Monitor system performance and application health to ensure high availability, identify bottlenecks, and implement optimization strategies.
• Collaboration & Support: Collaborate with software development teams, QA teams, and system architects to ensure alignment between development and operational goals.
• Incident Management: Troubleshoot and resolve issues related to the infrastructure and deployments. Perform root cause analysis to ensure issues are resolved efficiently.
• Security & Compliance: Ensure the infrastructure follows best practices for security, disaster recovery, and compliance with industry regulations.
• Documentation: Create and maintain technical documentation on infrastructure architecture, processes, and procedures for knowledge sharing and process improvement.

Key Requirements:

• Education: Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Experience:Proven experience working as a DevOps Engineer or in a similar infrastructure role.
  Hands-on experience with Azure Cloud Services (Azure Compute, Networking, Storage, Azure Resource Manager, etc.).
  Strong expertise in Azure DevOps services, including pipeline creation, release management, and configuration management.
  Experience in building and managing CI/CD pipelines using tools like Jenkins, Azure Pipelines, or GitLab CI.
  Knowledge of containerization technologies such as Docker, Kubernetes, and Azure Kubernetes Service (AKS).
  Familiarity with Infrastructure as Code (IaC) tools like Terraform or Azure ARM Templates.
  
• Skills:Strong scripting skills in languages such as PowerShell, Bash, or Python.
  Experience with version control systems (e.g., Git).
  Familiarity with cloud monitoring tools such as Azure Monitor, Log Analytics, and Application Insights.
  Understanding of networking and security principles within cloud environments.
  Strong problem-solving, troubleshooting, and analytical skills.
  Good communication skills and the ability to collaborate across teams.

Preferred Qualifications:

• Certifications in Microsoft Azure (e.g., Azure DevOps Engineer Expert or Azure Solutions Architect Expert).
• Experience with Agile methodologies and tools such as JIRA.
• Knowledge of microservices architecture and related deployment strategies.

Argyll Scott Consulting Pte Ltd

Position: Senior/ Junior Software Engineer

Campus: DigiPen (Singapore)

Description:

We are hiring a team of software engineers to design and develop software platforms for supporting multi-user AR/VR applications.

Salary Package for 2 years:

• Salary range: $4,000 - $8,000 per month
• 13th-month bonus
• Health and dental insurance

Role:

• Design and develop AR/VR software solutions for online education, team collaboration, and workplace training with a focus on real-time interactive simulation.
• Build infrastructure for real-time interactions, scripting tools, backend web services, and frontend applications.
• Design and implement spatial interactions using 3D game engines, modelling animation tools and shader programming

Educational and Experience Requirements:

• A degree in Computer Science or relevant field
• Strong knowledge in C++
• 3D engine development experience
• Familiarity with core engine technologies such as engine architecture, multi-threading, streaming, computer graphics and advanced real-time rendering techniques
• Experience developing optimized modules in C#/C++ within Unity and/or Unreal Engine
• Experience with database management systems
• Experience with software development life cycle
• At least 5 years of work experience in a similar capacity to qualify for the senior position

Application:

To apply, please submit your updated resume and relevant portfolio with the subject line “Senior/ Junior Software Engineer” sent to:

Dr. Tang Liang

Associate Dean of Academic

Email: singapore-jobs(at)digipen.edu

Responsibilities:

· Develop, test, and deploy Ansible playbooks to automate infrastructure provisioning, configuration management, and application deployment.

· Collaborate with development and operations teams to identify automation opportunities and implement efficient solutions.

· Maintain and improve existing Ansible playbooks and modules.

Qualifications:

· 3-5 years of hands-on experience with Ansible, with knowledge in Openshift and Red Hat Middleware is a plus.

· Strong understanding of containerization, virtualization, and cloud technologies.

· Proficiency in scripting languages (Python, Bash) and configuration management tools.

· Experience with Linux administration and networking.

· Excellent problem-solving and troubleshooting skills.

· Strong communication and interpersonal skills.

· Red Hat certifications (e.g., RHCSA, RHCE) are expected.