Primary Objective(s) of Position
• Manage key phases of projects such as assembly, testing, installation, pre-commissioning, commissioning, troubleshooting, repairs and maintenance for the marine, power generation, petroleum, construction and industrial market segments.
• Responsible for product service support related work on both diesel and gas engines.
• Support the design and development of other aspects of projects, when required, including tendering, contract review, design, drawing, scheduling, purchasing, packing and shipment of marine and oil and gas engines, and respective associated propulsion and / or power generation systems, as per customers’ requirements.

Duties & Responsibilities
• Perform installation audit checks on engine set-ups at site and ensure equipment installations are according to manufacturer guidelines/recommendations, and generate report, as required.
• Perform pre-commissioning, commissioning and sea-trial activities (where applicable) at customer sites (in Singapore or overseas) to ensure proper equipment operation as per equipment manufacturers’ guidelines / customers’ requirements.
• Perform supervision of the assembly and packaging of engine and generator set packages at the workshop, inclusive of inspections and testing, as and when required.
• Configure engine settings and parameters to meet specific requirements.
• Utilize diagnostic tools, software and technical manuals.

Duties & Responsibilities (Cont’d)
• Investigate engine malfunctions, diagnose issues and identify root causes.
• Interpret error codes, schematics, and technical manuals to pinpoint root causes of engine malfunctions.
• Propose and implement effective solutions to resolve problems.
• Supervise the disassembly and reassembly of engines for repairs and overhauls, when required.
• Supervise the replacement of faulty components, bearings, seals and gaskets.
• Calibrate and fine-tune systems for optimal performance.
• Conduct functional tests of repaired or newly installed mechanical and electrical systems.
• Perform dyno / load testing on engines and generator set packages.
• Maintain accurate records of inspections, repairs, maintenance activities and testing results.
• Generate technical reports and service documentation for customers and internal use.
• Conduct on-site familiarisation training to operators, when required.
• Provide remote or on-site assistance for troubleshooting, technical support and guidance to customers.
• Attend / Conduct engineering and project meetings and on-site inspections both in Singapore and overseas (when required).
• Adhere to safety protocols and regulations while working on engines to prevent accidents and ensure a safe working environment.
• Other ad hoc tasks as assigned by management.

Person Specifications
• Possess a diploma/degree in Mechanical or Automotive Engineering.
• At least 2 to 3 years of working experience in related industry.
• Strong understanding of diesel and gas engine principles, components and systems.
• Proficiency in diagnosing and troubleshooting engine issues.
• Able to read and interpret technical manuals, schematics and engineering drawings.
• Attention to detail and commitment to safety.
• Good problem-solving skills and attention to details.
• Effective communication skills for interacting with customers and colleagues.
• Ability to work independently and as part of a team.
• Must be able to travel overseas as and when required.

1. Provide timely and effective technical support for application-related incidents and service requests.

2. Troubleshoot and resolve application issues, both independently and in collaboration with development teams.

3. Monitor application performance, identify bottlenecks, and implement performance enhancements.

4. Conduct root cause analysis for recurring issues and implement preventive measures.

5. Collaborate with internal stakeholders to gather requirements and provide recommendations for application improvements.

6. Maintain documentation related to application configurations, troubleshooting procedures, and known issues.

7. Participate in application deployment and release management activities.

8. Stay updated with industry trends and emerging technologies to drive continuous improvement in application support processes.

9. Support UAT and Interface Testing

Requirements:

1. Must have minimum 5 years experience.

2. Strong technical knowledge and experience in supporting enterprise-level applications.

3. Proficiency in troubleshooting application issues, performing log analysis, and using monitoring tools.

4. Experience with databases and SQL query language.

5. Familiarity with software development life cycle (SDLC) and ITIL principles.

Preferred Skillset

• Java

• Oracle Database

• MySQL Database

• Jira

• Excel

• Diploma / Bachelor's degree in a related filed or equivalent experience.
• Minimum 1 year of experience in installation of Electricla and communication infrastructures.
• Prior experience in Railway preferred.
• Oversee the installation of various systems, equipment or machinery.
• Ability to work in a fast-paced environment.
• Team player with good interpersonal and communication skills
• Able to work indepdently with minimum supervision.
• Candidate with 5+ years of experience will be considered for Managerial role.

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

We are seeking an experienced Senior Software Engineer with expertise in C++ or Java to join our client team. The ideal candidate will have at least 4 years of hands-on experience in software development and a passion for building high-performance, reliable, and scalable systems.

Responsibilities:

• Design, develop, and optimize software solutions using C++ or Java, ensuring high performance and reliability.
• Collaborate with cross-functional teams to define, design, and ship new features or improve existing systems.
• Troubleshoot and resolve complex technical issues, ensuring minimal downtime and optimal system performance.
• Lead code reviews to maintain coding standards and mentor junior developers.
• Contribute to system architecture discussions and help design scalable and efficient software systems.
• Develop and implement unit tests, integration tests, and documentation to ensure code quality.
• Stay updated with the latest trends and advancements in C++/Java and related technologies.
• 
  

Requirements:

• A graduate in Computer Science, Software Engineering, or a related field.
• At least 4 years of professional experience in software development with a strong focus on C++ or Java.
• Solid understanding of object-oriented programming (OOP) principles and design patterns.
• Experience with multithreading, memory management, and performance optimization in C++ or Java.
• Proficiency in working with databases (e.g., MySQL, PostgreSQL, or NoSQL databases).
• Familiarity with version control systems (e.g., Git) and CI/CD pipelines.
• Excellent problem-solving skills and the ability to work effectively in a collaborative environment.
• Knowledge of cloud platforms (e.g., AWS, Azure, GCP) and containerization (e.g., Docker, Kubernetes).
• Experience with frameworks/libraries such as Spring (for Java) or Boost (for C++).
• Familiarity with network programming, real-time systems, or distributed computing.
• Exposure to Agile development practices and tools like JIRA.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Roles & Responsibilities

• Assist Project Manager to ensure project is progressing as planned and is completed on time within budget, contractual and Safety standards.
• Assist Project Manager to ensure all site works are done accordingly to specifications and to relevant authorities’ requirement.
• Prepare & submit drawings, materials and necessary documents to consultant for approval.
• Check working drawing, identify discrepancies for resolution.
• Maintain inspection records of works, materials and all completed works.
• Keeping track on variation and claims of contract and cost impact and feedback information to the Project Manager.
• Implement cost control measures to meet project budget.
• Site co-ordination with all concerned parties and to resolve site issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Candidate must possess at least a PEB/BCA recognized degree in Civil Engineering
• Minimum 3 years on site experience in Civil Engineering and Infrastructure works in Singapore
• Computer literate with knowledge of MS Project, Primavera, BIM and AutoCAD
• Ability to work independently and communicate at all levels.
• Advantageous to possess Class 3 Driving License

**Please submit your complete CVs exclusively in written form to [email protected]**

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

• Relevant DevOps certifications (e.g. AWS).
• Some experience with other cloud providers like Azure and GCP.
• Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.
• Knowledge on mobile and web applications development.
• Knowledge of big data and data analytics infrastructure in cloud.

Roles and Responsiblities

1. Site project management.

2. Overall project planning, scheduling, monitoring and updating to meet project completion targets.

3. Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

4. Work closely with sub-contractors on project progress and ensure timely work arrangements

5. Liaise with consultant and carry out site inspection.

6. Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

7. Preparation of structural analysis, loading calculation and drawings.

8. Establish good relationship with all relevant parties.

9. Ensure site safety & compliance to authorities’ requirements.

10. To take on PE Assignee supervision role.

Requirement

1. Degree in Civil Engineering or relevant Engineering

2. Min. 3 years’ experiences.

3. RE registration with IES

4. Experience in Infra-structure project more than 200million.

Other informaiton :

Work location at Bugis

To Apply

Please submit updated CV with below details.

• Current & Expected Salary

• List of Projects Handled

• Notice Period

Role & Responsibilities:

• Develop, implement, and manage security controls to block and mitigate security threats across the IT infrastructure.
• Understanding of perimeter and endpoint security solutions and able to create policies based on requirements.
• Evaluate and perform analysis of the business risks and control environment to identify weaknesses and design the control to operate effectively.
• Regularly review and fine-tune existing policies to ensure they remain effective and up to date with the evolving latest security threats and best practices.
• Collaborate with other teams to ensure policies are aligned with organizational goals and compliance requirements.
• Troubleshooting policies if they are not working as intended.
• Monitor and Analyze Security Events: Continuously monitor security events and alerts, analyze potential threats, and take appropriate actions to prevent security incidents.
• Policy Development: Develop and maintain security policies, procedures, and guidelines to ensure compliance with industry standards and best practices.
• Incident Response: Collaborate with the incident response team to investigate and respond to security incidents, providing expertise on security controls and mitigation strategies.
• Reporting and Documentation: Maintain detailed documentation of security controls, configurations, and incidents. Prepare regular reports on the effectiveness of security controls.
• Training and Awareness: Provide training and guidance to other team members and stakeholders on security controls and best practices.

Skillset (Must have):

• Experience: Work experience in cybersecurity, with a focus on policy creation, monitoring, and incident response.
• Technical Skill: Skilled in managing NDR, EDR, WAF, email security, and DLP policies. Strong understanding of endpoint/network security, threat detection, and incident response. Proficient in SIEM data querying and analysis.
• Analytical Skill: Excellent analytical and problem-solving skills, with the ability to analyze complex security issues and develop effective solutions.
• Communication Skill: Strong written and verbal communication skills, with the ability to convey technical information to non-technical stakeholders.
• Team Player: Ability to work collaboratively with cross-functional teams and build strong working relationships.
• Accountability and Responsibility: Take ownership of assigned tasks and projects, ensuring they are completed on time and to the highest standards. Proactively identify areas for improvement and take the initiative to address them.
• Critical Thinking: Apply critical thinking skills to analyze complex security issues, evaluate potential solutions, and make well-informed decisions.
• Independently perform tasks and responsibilities with minimal dependency and guidance, while continuously learning and adapting to evolving technologies.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Basic Qualification : At least ITE or Diploma in Electrical / Electronics

Minimum Experience : Fresh Grads /1 year working experience in installation in the field

of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC

literate.

Expected Skills : Knowledge of electrical & electronics

Good project supervision & documentations control

Independent

Driving Licence : Class 3 is required

Others : Able to communicate in English & Mandarin

5 days week – Monday to Friday 8.30am to 6.00pm

Lunch break : 45mins

Salary Range : $2K to $2.5K

Job Description

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

Location: Bukit Merah Central

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

MES Engineer/ IT Engineer/ Manufacturing IT

*Permanent Position

*Working Hrs: Mon- Fri 8.15am - 5.45pm

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Gather business requirements and evaluate shop floor automation solutions.
• Lead the implementation and optimization of MES systems to enhance production planning and execution.
• Configure and integrate MES with other plant systems, such as ERP and PLCs.
• Collaborate with vendors to develop and implement MES modules for data collection, analysis, and reporting.
• Coordinate with stakeholders and conduct testing (SIT, UAT).
• Provide system monitoring and support, system backup, including troubleshooting, configuration, and issue resolution.
• Perform systems and user administration.
• Provide training to end-users on MES, create and maintain documentation
• Develop and implement digital solutions to improve operational efficiency
• Lead and manage digitalization projects
• Provide technical support for production PCs, workstations, and network devices.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 2- 5 years of practical experience in MES implementation, configuration, and support, preferably in a manufacturing setting.
• In-depth knowledge of MES systems and their functionalities.
• Experience with industrial automation and control systems (PLCs, SCADA).
• Skilled in programming languages (e.g., SQL, Python, C#) and scripting.
• Experience in project and vendor management.

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Overview:

Electrical / PLC Engineer to design, implement, and maintain electrical and automation control systems. The ideal candidate will have strong electrical and programming skills and extensive experience with industrial automation systems.

Key Responsibilities:

Design, develop, and implement PLC programs for automated manufacturing systems using platforms such as Allen-Bradley, Siemens, or Beckhoff. Other platforms may also be utilized in the course of your work.

Create and maintain HMI (Human Machine Interface) applications, SCADA systems and MES as required.

Troubleshoot complex control system issues and provide timely solutions to minimize production downtime.

Develop and maintain documentation for PLC programs, including logic flowcharts and technical specifications.

Perform risk assessments and ensure compliance with safety regulations.

Perform calculations, sizing and deployment of LV electrical and control systems.

Inspection, testing and troubleshooting of existing and new systems.

Qualifications:

Bachelor's degree (or Diploma) in Electrical Engineering, Computer Engineering, or related field. Fresh graduates are welcome to apply, experience in Semi-conductor field is an added bonus.

Experience programming PLCs in an industrial environment preferred.

Proficient in ladder logic programming and structured text.

Experience with major PLC platforms. (Allen-Bradley, Siemens, TwinCAT, etc.)

Knowledge of industrial networks and communication protocols.(Ethernet/IP, Profibus, Modbus)

Experience with HMI/SCADA development.

Experience with MES integration and deployment.

Experience with electrical systems and industrial safety standards.

Strong problem-solving and analytical skills.

Strong communication skills.

Working Conditions:

Mix of office and factory floor environment

Will require travel to overseas sites including but not limited to, Singapore, Malaysia, China, India. Existing Visas not required, but is an added bonus.

Job Responsibilities:

Gather software requirements and design solutions for modules and small software systems

Develop and support software including applications, database integration, interfaces and new functionality enhancements.

Coordinate cross-functionally to ensure projects meet business objectives and compliance standards.

Write both internal and external technical documentation

Deploy, install, and configure hardware and software systems

Work with team members in customer support, field test and deployment

Perform bug fixing and improvement of current application framework

Requirements:

Bachelor Degree in Computer Science & Engineering, Electrical & Electronics Engineering, Information Technology, or equivalent

2-4 years of in-depth knowledge and experience in front-end and backend development

Ability to solve complex development problems and produce high-quality code while pushing the technical boundaries.

Proficiency in one or more programming languages; we use Python, Javascript and TypeScript.

Knowledge in frontend frameworks such as React, Next.JS, FastAPI, REST API or similar frameworks.

Experience with Docker/Kubernetes, DevOps, CI/CD, Github

Experience with Linux operating system (Ubuntu, RHEL, etc.)

Experience working on Agile projects and Agile methodology in general

Excellent problem solving, communications, and teamwork skills

Summary:

As an OutSystems Senior Software Engineer, you will be responsible for designing, developing, and maintaining applications using the OutSystems low-code platform. You will work closely with business analysts, project managers, and other developers to translate business requirements into robust, scalable, and user-friendly applications. Your role will involve both front-end and back-end development, integration with existing systems, and ensuring the overall quality and performance of the applications.

Key Responsibilities:

· Design, develop, and maintain applications using the OutSystems platform.

· Collaborate with stakeholders to gather and analyze requirements, translating them into technical specifications.

· Develop user-friendly interfaces, ensuring a seamless user experience.

· Integrate applications with existing systems and third-party services.

· Write clean, scalable, and maintainable code.

· Conduct unit testing and participate in code reviews to ensure high-quality deliverables.

· Troubleshoot and resolve issues in existing applications.

· Stay updated with the latest OutSystems features, best practices, and industry trends.

· Document application designs, processes, and changes

We are looking for a skilled and motivated DevOps Engineer (Azure) to join our project on a 12 months extendable contract basis. You will get an oppourtunity to work on exciting AI projects.

The successful candidate will work on the development, deployment, and continuous improvement of our cloud infrastructure, leveraging Azure DevOps practices and tools. This role will focus on building scalable and reliable infrastructure solutions that support our business applications.

Key Responsibilities:

• Azure Cloud Infrastructure Management: Design, deploy, and manage scalable infrastructure solutions using Microsoft Azure.
• DevOps Automation: Implement automation using Azure DevOps pipelines to automate the build, test, and release processes.
• CI/CD Pipelines: Develop, maintain, and improve Continuous Integration/Continuous Deployment (CI/CD) pipelines for seamless application delivery.
• Cloud Resource Management: Work on Azure resources (e.g., virtual machines, databases, storage) and ensure the infrastructure is cost-effective, scalable, and secure.
• Monitoring & Optimization: Monitor system performance and application health to ensure high availability, identify bottlenecks, and implement optimization strategies.
• Collaboration & Support: Collaborate with software development teams, QA teams, and system architects to ensure alignment between development and operational goals.
• Incident Management: Troubleshoot and resolve issues related to the infrastructure and deployments. Perform root cause analysis to ensure issues are resolved efficiently.
• Security & Compliance: Ensure the infrastructure follows best practices for security, disaster recovery, and compliance with industry regulations.
• Documentation: Create and maintain technical documentation on infrastructure architecture, processes, and procedures for knowledge sharing and process improvement.

Key Requirements:

• Education: Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Experience:Proven experience working as a DevOps Engineer or in a similar infrastructure role.
  Hands-on experience with Azure Cloud Services (Azure Compute, Networking, Storage, Azure Resource Manager, etc.).
  Strong expertise in Azure DevOps services, including pipeline creation, release management, and configuration management.
  Experience in building and managing CI/CD pipelines using tools like Jenkins, Azure Pipelines, or GitLab CI.
  Knowledge of containerization technologies such as Docker, Kubernetes, and Azure Kubernetes Service (AKS).
  Familiarity with Infrastructure as Code (IaC) tools like Terraform or Azure ARM Templates.
  
• Skills:Strong scripting skills in languages such as PowerShell, Bash, or Python.
  Experience with version control systems (e.g., Git).
  Familiarity with cloud monitoring tools such as Azure Monitor, Log Analytics, and Application Insights.
  Understanding of networking and security principles within cloud environments.
  Strong problem-solving, troubleshooting, and analytical skills.
  Good communication skills and the ability to collaborate across teams.

Preferred Qualifications:

• Certifications in Microsoft Azure (e.g., Azure DevOps Engineer Expert or Azure Solutions Architect Expert).
• Experience with Agile methodologies and tools such as JIRA.
• Knowledge of microservices architecture and related deployment strategies.

Argyll Scott Consulting Pte Ltd

Position: Senior/ Junior Software Engineer

Campus: DigiPen (Singapore)

Description:

We are hiring a team of software engineers to design and develop software platforms for supporting multi-user AR/VR applications.

Salary Package for 2 years:

• Salary range: $4,000 - $8,000 per month
• 13th-month bonus
• Health and dental insurance

Role:

• Design and develop AR/VR software solutions for online education, team collaboration, and workplace training with a focus on real-time interactive simulation.
• Build infrastructure for real-time interactions, scripting tools, backend web services, and frontend applications.
• Design and implement spatial interactions using 3D game engines, modelling animation tools and shader programming

Educational and Experience Requirements:

• A degree in Computer Science or relevant field
• Strong knowledge in C++
• 3D engine development experience
• Familiarity with core engine technologies such as engine architecture, multi-threading, streaming, computer graphics and advanced real-time rendering techniques
• Experience developing optimized modules in C#/C++ within Unity and/or Unreal Engine
• Experience with database management systems
• Experience with software development life cycle
• At least 5 years of work experience in a similar capacity to qualify for the senior position

Application:

To apply, please submit your updated resume and relevant portfolio with the subject line “Senior/ Junior Software Engineer” sent to:

Dr. Tang Liang

Associate Dean of Academic

Email: singapore-jobs(at)digipen.edu

Responsibilities:

· Develop, test, and deploy Ansible playbooks to automate infrastructure provisioning, configuration management, and application deployment.

· Collaborate with development and operations teams to identify automation opportunities and implement efficient solutions.

· Maintain and improve existing Ansible playbooks and modules.

Qualifications:

· 3-5 years of hands-on experience with Ansible, with knowledge in Openshift and Red Hat Middleware is a plus.

· Strong understanding of containerization, virtualization, and cloud technologies.

· Proficiency in scripting languages (Python, Bash) and configuration management tools.

· Experience with Linux administration and networking.

· Excellent problem-solving and troubleshooting skills.

· Strong communication and interpersonal skills.

· Red Hat certifications (e.g., RHCSA, RHCE) are expected.

About the Company

Our Client is an innovator and leader in the mobility space.

Responsibilities

We’re looking for a Software Engineer (Full-Stack) to provide technical expertise and perform hands-on development and maintenance of the company’s web applications.

• Perform hands-on software development for both frontend and backend;
• Ensure that code and tests are well-designed and of high quality;
• Troubleshoot and find solutions for complex technical issues;
• Work closely with product and engineering teams to ensure strong alignment;
• Identify any risks and suggest mitigations;
• Ensure proper documentation.

Requirements

• Degree in Computer Science or a relevant discipline;
• At least 3 years of experience in full-stack software engineering;
• Technical proficiency and proven experience in React, Angular, and/or Typescript;
• Proven experience in microservices;
• Familiar with in agile methodologies;
• Understanding of software engineering best practices.

Employment Details

• Permanent role;
• Hybrid work arrangement;
• Excellent career progression and advancement opportunities.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

☑ Basic $ 4500 - $ 5000 Days (Mon – Fri: 08:30am – 5.30pm)

☑ Office Centrally located, Island wide jobsite attended required

☑ Good Benefits + Career Growth

☑ Experience in Fire Protection Project is advantageous!!

Responsibilities:

• Conduct site inspections, gather data, and coordinate with the design team for drawings.
• Verify drawings before construction, addressing customer requirements.
• Coordinate with design team, customers, and subcontractors during construction.
• Inspect and ensure quality work from subcontractors; assist Project Manager in meeting project timelines and safety standards.
• Oversee testing, commissioning, customer training, and final inspections for as-built drawings.

Requirement

• Diploma / Degree in Mechanical Engineering or any related field.
• 1-3years of Project Management experience.
• Knowledge of ISO 9000 standards, problem-solving, and analytical skills.
• Proficient in English, computer skills, and experience with LTA projects preferred.

Interested applicants are welcome to apply online with updated resume to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

Responsibilities:

• Responsible for the design and selection of rotating equipment on EPC projects through the various engineering work phases (i.e. Feasibility / FEED studies and detailed engineering for Offshore, FPSO Projects)
• Plans and directs technical specifications/ standards
• Review all technical requirements incorporated in engineering deliverables.
• Evaluates the technical aspects of bids received from suppliers and concludes technical assessment.
• Assists in placing and executing the orders. Review supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakeholders.
• Oversees the technical and administrative management of the project mechanical team and ensures quality/ schedule of deliverables from the team.
• Provides technical/ engineering support and advice for quality work at site.
• Resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post delivery.
• Ensures business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements:

• Possess Degree in Mechanical Engineering or equivalent
• At least 15 years of relevant work experience, preferably in the Marine Offshore/ Oil & Gas industries
• Conversant with design standards and International Industry Codes such as ASME, API etc.
• Conversant with specifications and requirements for mechanical rotating equipment such as process gas compressors, screw compressor packages, reciprocating compressors, gas turbines, Sea Water injection pumps and requirements of Industry Codes and Standards, Classification Society rules and all relevant regulatory.

Interested applicants are welcome to submit your resume to [email protected]

EA. R1107675

Agency no. 07C3676