We are looking for a creative, resourceful System Engineer to join us. You will be responsible for interpreting system requirements, designing solutions, and implementing solutions. This role requires good system architecture skills to produce documentation for submission. You will work with a multi-disciplinary team and be exposed to interactions with customers, partners, vendors, and sub-contractors. All efforts will feed into delivering mission-critical autonomous solutions for maritime vessels. Experience in maritime industry and power supply design is preferred.

Be Part of Our Success

• Translate system level requirements and use cases into verifiable subsystem and component level requirements.
• Design, source, and integrate subsystems, and evaluate hardware and software solutions.
• Work with industry partners to evaluate and adapt their solutions to fulfil requirements.
• Work with internal engineering development team to define required solutions.
• Troubleshoot system and propose solutions to ensure high availability of system.
• Develop and execute integration and test plans.
• Develop and maintain technical documentation.
• Communicate with customer on system design and implementation.
• Implement designs and solutions on-site.

Requirements

• Knowledge in Engineering, Computer Science or a related field.
• Strong understanding of electrical engineering principles.
• Good technical, creativity in problem-solving skills and strong reasoning ability.
• Excellent communication skills, both verbal and written, with the ability to convey technical information to diverse audiences.
• Familiarity with industry standards, regulations, and best practices related to mechanical engineering is an advantage
• Ability to work effectively in a team environment
• Ability to travel overseas as required

Network Engineer – Routing and Switching

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer/IBM
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per IBM security policies and standards.
• Maintain/Update IBM inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per IBM service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Please apply at https://grnh.se/7fe843e14us

Garda is looking for a Senior Software Engineer (.Net) in its Research and Technology (R&T) group based out of our Singapore office.

The R&T team is responsible for all of the firm's applications & infrastructure including analytics, portfolio and risk management. The selected candidate will join the team responsible for designing, developing, and supporting upgrades to our analytics platform and building out our data platform. This position requires proficiency and experience in software development using Microsoft .Net based technologies. While prior business knowledge is not mandatory, capital markets-related experience will be a plus.

Additional responsibilities of the role include but are not limited to:

• Develop new line of business solutions using C#, WinForms, Excel, R, and SQL (Oracle / Postgres)
• Provide support for in-house and 3rd party applications
• Diagnose and fix issues with trading desk systems (In-house analytics, Bloomberg, TradeWeb, other vendor and proprietary systems)

Required Qualifications:

• Bachelor's Degree in Computer Science, Software Engineering, Mathematics or Finance
• 5+ years of object-oriented development using C# and Microsoft.Net
• 5+ years of database, SQL, ORM experience
• Must be comfortable with development across the application stack
• Ability to complete complex projects independently
• Detail-oriented with strong verbal and written communication skills
• Ability to work effectively in a high-energy, time-sensitive team environment

Preferred Qualifications:

• Knowledge of fixed-income trading and related financial instruments including bonds and interest-rate derivative products
• Experience with Excel, Excel VBA, Bloomberg
• Experience with Python

In Digital Resiliency Engineering (DRE), we combine software and systems engineering to build and operate large-scale and distributed systems designed and/or built by the Singapore Government.  We ensure Government services are reliable, meets expected performance and satisfy customer needs.

If you are someone with strong DevOps, Infrastructure engineering and/or SRE background, have experience operating mission critical production technology infrastructure at scale, and are looking for opportunities to work with a team of practitioners and leading industry experts, we welcome you to join us.

In this role, you will build central services for observability and automation of infrastructure services. You will be part of a rotation with other engineers in providing rapid response to major incidents impacting critical Government Services. You will provide technical leadership for the team and work closely with technical leads to operate highly available solutions. You will also provide guidance to other team member on managing availability and performance of mission critical services, building automation and monitoring solutions to prevent problem recurrence, and building automated responses for non-exceptional service conditions.

You will also manage execution of project priorities, deadlines and deliverables. You will also lead designs of major components, systems and features to improve availability, scalability, latency and efficiency of services design and built by the Government.  

Key Responsibilities:

• Build Service Level Indicators (SLI), Service Level Objective (SLO), Error Budgets, and Post-mortem Incident processes.
• As part of an on-call roster, ensure reliability and performance of critical Government Services. Provide operational support and engineering for large-scale and distributed systems to drive incidents resolution effectively.
• Gather and analyse metrics and logs from Operating Systems and/or applications for capacity planning, performance tuning and fault isolation.
• Build automation to manage services, infrastructure, and/or applications.
• Improve reliability and quality of services using proactive monitoring.
• Measure and optimize system performance, with continuous improvement and pushing SRE practice forward.
• Build SRE playbook for the Whole-of-Government to leverage as reference for SRE.
• Identify potential and emerging technologies relevant to innovation for the Government.
• Work in a cross-functional service team consisting of software engineers, infrastructure engineers, DevOps, and other specialists.

Qualifications:

• 5+ years of experience in technology operations as an Infrastructure Engineer or Site Reliability Engineer - with experience operating large-scale mission critical production systems.
• Expertise in building and operating automated monitoring and incident detection systems, creating runbooks and running incident management processes.
• Expertise in designing automation solutions using provisioning tools, continuous integration tools (CI/CD), and scripting languages.
• Experience leading highly complex technical projects with multiple dependencies and stakeholders
• Knowledgeable and experienced in working within an Agile development environment, focusing on dynamic and rapid quality delivery.
• Proficient in building and managing highly available and scalable IT infrastructure and/or application, with knowledge in Container and Virtualization technologies.
• Proficiency in Python, PowerShell, or Ruby.
• Proficiency with Infrastructure as Code (IaC) tools such as SaltStack, Puppet, Terraform, or Ansible.
• Able to work independently and deliver results within specified deadlines.
• Ability to prioritize work and strong problem-solving skills.
• Good to have communicate skills, both verbally and in writing to users, vendors and management.
• Ability to communicate complex interaction concepts clearly and persuasively across different audience and varies levels in GovTech.

Join us at Assurity Trusted Solutions and contribute to creating innovative solutions that secure and enhance digital infrastructure!

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used, and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech, and their service providers and agents in accordance with ATS’s privacy statement found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Annual Leave Benefits with additional perks such as Family Care and Birthday Leave.
• Contract Staff enjoys the same benefits as Permanent Employees.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Business Development Manager

• Gross Salary: Up to $5000 (Depending on experience)

• Working days & hours: Monday – Friday: 8.30am – 5.30pm

• Location: Newton

• Benefits: AL + PB + Medical Benefits + Allowances

Job Responsibilities:

• Identify and acquire new corporate clients for secured property lending.

• Manage and maintain relationships with existing clients to ensure satisfaction and retention.

• Promote the company’s financial products and provide professional guidance on loan solutions.

• Meet and exceed assigned KPI targets.

• Develop and maintain a strong network of business contacts to drive referrals and new opportunities.

• Prepare comprehensive credit proposals, including detailed financial analysis.

• Perform other administrative tasks as needed.

Job Requirements:

• Min. Diploma in Finance or relevant field

• Min. 1 – 2 years of relevant experience in property, term and mortgage loans

• Candidates with no experience are welcome to apply too.

Interested applicants please send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be contacted by our consultants.

Align Recruitment Pte Ltd (20C0253)

Rei Lai Yu Wen (R2199207)

Responsibilities

• To develop and maintain strong, long-term relationships with key corporate and maritime clients.

• To identify new business opportunities with existing accounts by collaborating with clients to develop corporate healthcare solutions to meet their evolving needs, including upselling or cross-selling additional services.

• To actively manage and track the end-to-end sales cycle of opportunities from lead generation to deal closing and contracting, including maintaining an up-to-date sales pipeline and disciplined process of client relationship management.

• To ensure smooth and timely delivery of commercial projects from deployment planning to on-the-ground execution, working closely with internal teams such as operations, procurement, technology, finance, and HR.

• Support acquisition of new clients by working closely with Chief Corporate Development Officer to engage and cultivate potential accounts.

Requirement

• Bachelor degree in Business Administration, Marketing, Healthcare Management, or related field

• Minimum of 10 years of experience in business development, sales operations, or a related role, preferably within the healthcare sector

• Strategic thinker with strong problem-solving skills and the ability to adapt to a rapidly changing environment

• Knowledge of the Maritime sector and its health and safety regulations is a plus

Interested candidates please send in your resume to:

[email protected]

EA Personnel: Valerie Yong Kian Fung

CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

- 1 year renewable contract

- Up to $5000 + 1 month completion bonus

- Mon to Fri: 9am – 6pm

- Telok Ayer

Job Scope:

Providing solutions to our Global Headquarter in order to improve their working productivity by utilizing multiple technologies. The main scope of the job is to develop and maintain applications for and manage the OutSystems Platform. Others may include Google technologies, programming languages such as Python, React etc

Project Function : Additional Resources for OutSystems

Responsibilities:

• Requirement gathering, architecture design and application development and maintenance.
• Having an understanding of the Design Thinking process will be an added advantage.
• Having an understanding of the development life cycle will be an added advantage.
• Having an understanding of Object Oriented Programming will be an added advantage.
• Having an understanding of agile and scrum methodology will be an added advantage.
• Knowing how to develop in OutSystems will be an added advantage.
• Must be able to work independently as well as within a team.

The candidate should have the expertise/experience of:

• Programming languages: Python ,React, SQL
• Web application development
• Object Oriented Programming (OOP)
• Design pattern: MVC

Duration:

• 1 year renewable contract

Salary:

• Up to $5000 + 1 month completion bonus

Location:

• Telok Ayer

Working hours:

• Monday to Friday: 9am – 6pm (ONSITE ONLY before probation, after confirmation, at manager discretion, can get 3 days WFH (this hybrid work arrangement will be reviewed every 6 months)

Requirements:

• Degree / Diploma that is relevant to Computing and Information Technology

Experience:

• Preferably with 1 - 3 years of software development experience

Personal Attributes:

• Work independently
• A team player
• Constructive
• Self motivated
• Supportive

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914
T: 6337 3183 | W: www.successhrc.com.sg

Senior Process Engineer – Wastewater Treatment Design

Our client is an expanding environmental solutions company specializing in industrial wastewater treatment, as well as water reclamation & recycling. With expertise in design & build, EPCC and O&M services, they’re now seeking a Senior Process Engineer to lead their team in the design, implementation and optimization of wastewater treatment processes and systems.

Job Responsibilities

• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum Degree in Chemical Engineering, Environmental Engineering or related field
• Possess process/mechanical design experience with wastewater treatment projects
• Must be willing to be hands-on to be on site occasionally
• Must be able to draw and review drawings (i.e. create process flow diagrams (PFDs), piping and instrumentation drawings (P&IDs), perform detailed calculations related to plant process design)

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

• Good degree in Civil / Structural Engineering from a recognized University
• Minimum 5 years working experience in Civil & Structural Consultancy Firm
• Experience in Underground & Bridge structures would be advantages
• Ability to work independently
• Candidates without the relevant working experience but with good academic results may be considered

Job Description

This is a client facing / delivery role, working on cloud operations in the delivery team. You will execute daily cloud operations as well as cloud implementations in technical customer engagements including basic operations and administration, specific implementation projects and/or pilots in Cloud.

The ideal candidate will have experience in delivery roles and success in implementation discussions, hands-on experience with good client handling skills and good team player within the team. The candidate should also be able to provide solutions and technical expertise to fellow team members and in client accounts.

Responsibilities

• Apply technical knowledge, hands-on and customer insights to operate and administrate a cloud infrastructure
• Ensure all configuration conforms to high levels of performance, security, scalability, maintainability, and appropriate reusability and reliability upon deployment, aligning to design documentation specifications
• Ability to codify or implement/deploy configurations with the principles of automation by default in new projects with proper documentations will be advantageous
• Ability to codify or maintain cloud systems in an automated fashion using tools like Ansible, CloudFormation, Terraform etc with proper documentation will be advantageous
• Participate in Cloud Migrations for VMs using tools like CloudEndure, Azure Migrate with more than 20 VMs migration or Databases would be preferred
• Collaborate with team members to engage clients in operational meetings, discussions, process betterment and contribute to optimisations for the client’s environment
• Maintain technical skills, certifications and knowledge of market trends and competitive insights; collaborate and share with the technical community specifically in the cloud space
• Ability to resolve issues with proper resolution/documentation technically and SLAs is required for this role

Qualifications

• Professional Experience - 3+ years of success in operational/administration and deployment/migration projects in Cloud Environment
• Problem Solving. Ability to solve customer problems through cloud technologies
• Collaboration and Communication. Acknowledged helping to provide solutions to issues collaboratively, resolving conflicts and ensuring follow through with proper follow up and closure.
• Technical
  Strong technical experience with cloud infrastructures, migrations, and technology management preferred
  AWS Solution Architect Associate Certification will be advantageous.
• AWS Cloud Practitioner Certification or Azure Certified Administrator or Fundamentals is required
• Subject matter expertise in one or more of the following:
• Competitive Landscape. Knowledge of Containerisation technologies eg EKS/AKS/GKE/K8s/Openshift/Tanzu would be advantageous

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

• Generate new clients and maintain existing clients
• Arrange for zoom/appointments to introduce company with sales presentation
• Handle customer’s enquiries
• Liaise with internal and external departments to ensure client’s requirements is met
• Prepare costing, tenders, proposals and quotations
• Maintain updated record of business transactions with clients and suppliers
• Responds to client’s complaints and feedbacks
• Provide after sales/technical support to clients
• Refer technical issues to Engineer Specialist if it is beyond the current team’s expertise
• Ad-hoc duties as assigned

Requirements:

• Proficient in MS Office Applications
• Min. 2 year of related work experience
• Working Hours: Mon-Fri (8.30am – 5.30pm)
• Location: Tagore
• Salary: up to $6000 + Transport Allowance + Mobile Allowance
• Able to start work immediate or on short notice

How to apply:

Interested applicants kindly state your expected salary, last drawn salary and starting date.

We regret to inform that only shortlisted candidates will be notified.

Log on to www.e-cruitteam.com.sg for more job opportunities!

EA Personnel: Teo Kai Xin, Joey

EA Reg ID: R23114229

EA Licence No.:19C9603

Responsiiblitiies:

• Responsible for the Software Test design and execution for the applications under test.
• Work closely work with the QA Manager, Business/Functional Analyst and Project Manager through the Project Life Cycle.
• Able to perform defect reporting and verification of the fixes.
• Effective Communication with strong interpersonal skills and good analytical, problem solving skills.
• Conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Knowledge of SQL and scripting.
• Hands-on experience and expertise with test management tool.
• Development /scripting skills in programming languages which are compatible for Selenium WebDriver such as Java/C#/Python.

Requirement:

• Bachelors degree in comuter science or equivalent
• Possess 3 to 5 years of experience in Funcational / Automation testing
• Experience in Software Development Life Cycle Process (SDLC) , Software Testing Lifecycle (STLC) ,Test Methodologies and defect life cycle.
• Knowledge and experience in analysing Software Requirement Specification and identifying and creating the required test scenarios, test cases, test data and document traceability matrix to ensure sufficient test coverage.
• Experience in executing test cases and test plans to support the quality assurance activities throughout the software lifecycle.
• Healthcare domain knowledge.
• Experience in testing mobile apps.
• Experience in Automation of Web Applications.
• Good Knowledge in using Version control Management tools such as Bitbucket, GitHub and sound understanding of the code review process.

Shortlisted candidates will be offered a 1 Year Agency contract employment.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

• Develop, test, and debug automated tasks (Apps, Systems, Infrastructure)
• Have a solid technical skill with diversity of thought and creative solutions that are in the best interests of our customers globally.
• Lead and participate in performance tests; identify bottlenecks, opportunities for optimization, and capacity demands.
• Troubleshoot priority incidents, facilitate blameless post-mortems.
• Work with development teams throughout the software life cycle ensuring sustainable software releases.
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions.
• Adhere to firm-wide architecture standards, risk management and security policies.
• Team player and ability to work in Global Team setup, product owners and business team to develop, build & support application.
• Communicate and collaborate on development items with global team, as well as raise/work to resolve issues impacting development.
• Participate in quality assurance, peer reviews and code reviews Qualifications.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Good understanding of networking protocols and cybersecurity best practices in public cloud environment
• Advanced working SQL knowledge and experience working with RDBMS, Hadoop, and NoSQL DB.
• Experience performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.
• Experience supporting and working with cross-functional teams in a dynamic environment.
• Strong understanding of DevOps practices, tools, and techniques and experienced deploying application in a containerized environment using Docker/Kubernetes/PCF/Openshift/AWS etc.
• Hand-on experience with cloud-based technologies and tools especially in deployment, monitoring and operations, such as Prometheus, Splunk, Elasticsearch, Grafana

• Developing and planning engineering strategies
• checking on paper and site work progress
• conducting project safety briefing
• controlling materials order and usage
• supervising construction team
• increasing company's work quantity and quality
• ensure that structure are constructed in a safety and sturdiest manner
• reporting to director and PM
• liaise with consultants, conractors and authorities
• miscellaneous duties and adhoc works

• Work with users and IT members on a routine basis to troubleshoot reported problems pertaining to application software.
• Identify, log and resolve technical problems of the scope (Incident Management)
• Respond to site to troubleshoot, diagnose and rectify faults.
• Liaise and coordinate the recovery of systems.
• Identify potential changes and system improvements for consideration and implementation
• Create, maintain, and distribute reports of progress to service delivery manager.
• Gather, analyze and assess the client's business requirements and processes evaluate the viability and feasibility of implementing them (including operational and security policies and requirements) and also possible improvements.
• Conduct system functionality testing and work with users user acceptance testing to verify that client requirements are incorporated into the system design
• Support multiple application systems.
• Identify the cause, design, or develop an approach for resolution.
• Communicate and interface with vendors and customers.
• Generate reports and write documentation, e.g. maintenance guide, operation manuals

Requirements

• Degree / Diploma in Information Technology
• Min 3 years of experience with enterprise scale Linux and Windows administration
• Familiar with MySQL, Oracle, and other database servers
• Hands-On experience of .Net framework and Web Services
• Scripting: Windows PowerShell, Unix Scripting will be added advantage
• Able to work well within team and willing to learn
• Good grasp of emerging technology trends
• Start-up focused with an upbeat and enthusiastic attitude

Please send your detailed resume in MS Word format to [email protected] with:

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Key Responsibilities:

1. Design & Implementation:

• Integrate Azure Sentinel with on-premises and cloud-based resources for comprehensive threat visibility.

• Develop and manage Log Analytics Workspaces and data connectors.

2. Security Monitoring & Threat Detection:

• Create and maintain custom rules, alerts, and automation playbooks.

• Analyze security events, identify threats, and provide actionable recommendations.

• Monitor and manage SIEM dashboards for real-time threat intelligence.

3. Incident Response & Management:

• Respond to security incidents and conduct root cause analysis.

• Coordinate with stakeholders to mitigate risks and resolve vulnerabilities.

4. Optimization & Automation:

• Enhance Sentinel performance by optimizing data ingestion and query performance.

5. Documentation & Reporting:

• Develop and maintain documentation for configurations, processes, and incident responses.

• Generate detailed reports on security incidents, trends, and recommendations.

Qualifications & Skills:

• Bachelor’s degree in Computer Science, Information Technology, Cybersecurity, or related field.

• Proven experience with Azure Sentinel, Microsoft Defender, and Azure Security tools.

• Strong understanding of SIEM platforms and security operations.

• Knowledge of KQL (Kusto Query Language) for writing log queries and analytics rules.

• Familiarity with threat detection frameworks like MITRE ATT&CK.

• Experience with incident response, threat hunting, and SOC operations.

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently looking for a Server Programmer to join our energetic team in Singapore!

Job description

· Work on server or network related tasks that include but not limited to mobile game server architecture design, modular design, game server end program logic development and maintenance efforts

· Develop game services and supporting applications

· Assess, develop, test, debug, and maintain game services

· Propose creative solutions to meet product goals

· Work effectively in cross-functional teams and collaborate with internal and remote teams to identify, produce, and deliver tasks on time

Job requirements:

· Degree in Computer Science or related field

· 3+ years’ experience in the mobile games industry or equivalent

· Experience with all phases of product development lifecycle, including requirement definition, development, testing, releasing of product(s) and live operations

· Expert in C/C++ is a must, familiarity with C++ as server framework is a plus

· Expert on network protocols: Socket programming, TCP, UDP, HTTP

· Solid understanding of distributed systems and micro service development (SOA, SaaS)

· Expert on SQL and relational database operation

· Preferably with understanding of Unity game engine and C#

· Preferably with Git-related experiences

· Preferably with solid understanding of functional and reactive programming

· Preferably with experience in developing mobile games (iOS & Andriod)

· Familiarity with client server data synchronization (e.g. state/frame synchronization) is a plus

· Familiarity with Golang, protocol buffers would be a plus