Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Responsibilities:

• Responsible for Line sustaining activities and new device process development/evaluation for wet related processes
• Support NPI for any gap analysis and new device safe launch monitoring
• Wet Process recipe creation based on device requirements
• Perform wet process window study and provide improvement plan to reduce OOC and improve CPK
• Lead continuous improvement projects & device qualifications using APQP approach
• Work with Quality Management department to address customer inquiries and issues.
• Execute CIP (Continuous Improvement Program) or manage projects that contribute to improved yield & cost efficiency
• Characterizing wet process and ensure SPC is well maintained and under control
• Start up and qualify new wet processes/material and new equipment within the scheduled timeline
• Work with RnD for new technology roadmap and report the evaluation results in a timely manner
• Update specifications/ documentation to meet TS16949 Quality Standard requirements (Work instruction, PFMEA, OCAP)
• Involvement in Smart Factory (Scope inspection, AI ADC for AOI, Hand Free automation)

Requirements:

• Degree in Engineering or Science
• At least 3 years of experience in the semiconductor manufacturing industry with wet process such as electrochemical plating, wet etching etc
• Statistical (SPC) and analytical skills (problem solving methodologies) are essential
• Application of quality and SPC tools at work - FMEA, DOE, SPC, etc

About the role

This position involves applying knowledge in engineering and science to design & develop scale up processes in the laboratory and future production of our aerogel line of products. Successful candidate will be given a fulfilling role to work in the company’s state of the art platform technology, ASPIRe. As a valuable member of the team, you will be involved in every aspect of the development from infancy to the implementation

Process Engineer

Locations: 8 Cleantech Loop, #08-37 Singapore 637145 .CleanTech 3

Working Days: 5 days a week

Time: 9 - 6 pm

Basic Salary ranges from $4500 to $5500 (Depending on qualifications and experience).

Other benefits include transport allowance and basic medical coverage, annual leave, paternity/maternity and compassionate leave.

Roles & Responsibilities

• Assist Production Manager in the daily running of production department.
• Design and develop the pilot process plant for upscale production.
• Develop product testing protocols and procedures based on product specifications to test and determine the full operating profiles.
• Lead in troubleshooting of process equipment and machinery when required
• Assess processing suitability according to varying criteria including performance, ease of manufacturing, reproducibility, and scalability
• Consolidate operating parameters and other observations in a clear and structured format/template
• Develop framework and manage safety records such as SOP, SWP, GMP and RAM.
• Work closely with the formulations and product development team to achieve optimization in processes in terms of efficiency and cost.
• Carry out quality control for in-house development and customer samples
• Work closely with business team and customers/industry partner for pilot trials, implement their feedback and improve existing product to achieve customer specification.
• Development of a suitable manufacturing process for the product formulation.
• Production of sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches
• Work closely with other departments to validate manufacturing methods for production scale batches.
• Train production personnel on manufacturing processes.
• Trouble-shooting in the process matrix for routine production.
• Maintain and document quality records with regards to processing units and machinery.
• To establish and maintain Good Manufacturing Practices for all commercial projects.
• Mentor and manage junior staff.
• Prepare progress update and presentations
• To ensure all GMP quality related records are kept properly

Requirements

• Have a Bachelors / Masters in chemical engineering, mechanical engineering, industrial engineering or a related field
• Have knowledge on process design software such as CHEMCAD, CHEMPRO, AspenPlus and/or other related software.
• Have a good knowledge of industrial processes and best practices in chemical plants.
• Have a good knowledge in HVAC systems
• Self-directed learner, ambitious with desire to succeed and positive attitude towards learning
• Experience in coatings/paint would be advantageous.
• Good knowledge of chemical handling.
• Project Management expertise

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘process engineer’ in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, residential status in Singapore, details of your educational background and work experience.

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

This role is to support global business processes across sales, factories and business unit organizations, with a focus on assembly pricing activities. We are looking for a resourceful teamplayer who is adept at utilizing and integrating data from multiple systems to put together pricing proposals. The candidate should be highly adaptable to changing business needs and possess strong analytical skills. This position is based at our Regional Singapore office.

Core Responsibilities

• Focus on OSAT pricing and costing activities for assembly packaging.
• Key responsibility for the initial 3 months will be on daily production price maintenance duties, and approving pricing issues in SAP
• Responsible on cost models preparation to provide cost estimates and manufacturing readiness inputs to business unit, engineering and factory.
• Respond timely to relevant pricing requests in RFQ systems through price benchmarking and profitability analysis.
• Oversee RFQ trend, win/loss effectiveness and RFQ cycle time efficiency
• Support critical meetings with internal cross functional teams on product costing
• Partner with Business Units, factories, and sales to assure integrated and profit maximizing approach.
• Adhoc analysis of various revenue related items

Job Specifications (Qualifications/Experience/Skills & Knowledge/Personal Qualities)

• BS degree in Engineering.
• Minimum 5 years of relevant experience in semiconductor industry.
• Knowledge in assembly packaging processes will be preferred.
• Familarity with SAP system.
• Advanced Excel skills and ability to manipulate large data set is a must.
• Strategic thinker with a proven ability to translate technical requirements/issues into the business context or vice versa.
• Excellent communication and presentation skills, both verbal and written
• Independent, able to multi-task, and collaborate with cross functional and cultural groups.

Interested applicants, please kindly email your update resume to [email protected]. We regret to inform that only shortlisted candidates will be notified.

The role is responsible for Equipment Package Ownership (full lifecycle – Engineering Design, Build, Testing (FAT), Installation and Commissioning), including experience in commissioning and qualification of process equipment.

Responsibilities:

● Experience in upstream / downstream / Central services process operation, (experience in equipment design for process equipment will be an advantage).

● Project scheduling and able to come up solutions to keep the schedule on track when there are hiccups.

● Responsible for basic and detailed design, commissioning and qualification activities, including URS development, FAT, SAT, DQ, IQ, OQ and PQ.

● Review industry practices for best-in-class approach.

● Ensure that the appropriate Quality standards are applied consistent with best practice and internal Quality Standards and expectations.

● Deliver the project from conceptual through implementation phase, encompassing support for a wide range of engineering and construction requirements.

● Coordinates with different functions like manufacturing, safety, MSAT, validation and quality for implementation of changes associated with the project.

● Work independently and/or with the project manager to complete the engineering projects within schedule, budget and quality constraints.

● Agile response to equipment issue, troubleshoot and come up with solutions swiftly.

● Any other task as assigned by Supervisor/Manager.

About You:

● Diploma/Degree in Chemical Engineering, Chemistry or equivalent with at least 5 yearss experience in a process engineering role or similar role with a biologics manufacturing plan.

● At least 5 years of relevant working experience in the Pharmaceutical / Biologics manufacturing industry with experience in Process Engineer.

● In Biologics industry with understanding of cGMP requirement.

● Should have Design experience at various stages of project (Base, Detailed design).

● Able to support Installation, Commissioning & Qualification activity at site.

● Must be able to drive project.

● Any other task given related to Process.

Contract length: 12 Months. Option to extend depending on performance and business needs.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Equipment – CQV Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Experience in conducting equipment/facility FAT/SAT, IQ/OQ/PQ protocols, and serving as both author and executor of QSR (KAYE validator).

· Proficient in writing PQ, cleaning, development/study protocols, SOPs, and work instructions.

· Responsible for raising Change Control requests, identifying tasks, and performing impact assessments, with a focus on processes and process equipment.

· Experienced in writing deviations related to processes, cleaning, and process equipment (PQ).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Descriptions

• To reach the departmental quality target.
• Work closely with the production team and supplier to investigate and troubleshoot for process related problem
• To initiate evaluation and improve the existing process
• Standardize work procedures and provide training to all technicians and operators
• Provide guidance and motivation to all team members
• To answer qualities complaints and any discrepancies that arise
• To prepare a plan for the subsequent quarter and review for MBO (Management by objective)
• To initiate continuous cost reduction activity

Job Requirements

• Bachelor's Degree in Chemical Engineering
• Proficiency in Microsoft Office
• Strong analytical skill problem-solving skills
• Ability to multitask
• Able to handle a few projects at the same time
• Prefer one with at least 5 years of relevant working experience

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Job Descriptions

• To reach the departmental quality target.
• Work closely with the production team and supplier to investigate and troubleshoot for process related problem
• To initiate evaluation and improve the existing process
• Standardize work procedures and provide training to all technicians and operators
• Provide guidance and motivation to all team members
• To answer qualities complaints and any discrepancies that arise
• To prepare a plan for the subsequent quarter and review for MBO (Management by objective)
• To initiate continuous cost reduction activity

Job Requirements

• Bachelor's Degree in Chemical Engineering
• Proficiency in Microsoft Office
• Strong analytical skill problem-solving skills
• Ability to multitask
• Able to handle a few projects at the same time
• Prefer one with at least 5 years of relevant working experience

Process Engineer/ Validation Engineer/ Equipment Engineer

• Working Hours: 8.15 - 5.45pm Mon -Fri
• Permanent Position / MNC
• Near Woodlands Interchange

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Prepare and execute process validation protocols (MVP/IOPQ) and reports for new and existing product, process and equipment with tooling, production, maintenance and quality personnel for all customers before mass production.
• Train on MVP/IOPQ to all concerned department/personal and prepare training records.
• Prepare instructions/procedures for the assembly processes, ECN/ECR/Deviation are drafted & executed.
• Execute engineering change notice (ECN)from customer/ in house and update ERP system promptly.
• Analyze defect reported in-house and customer with quality, tooling and production.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap, and perform internal quality system audit.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers
• To ensure all equipment on the mechanical assembly lines are in good functioning state.

Requirements

• Bachelor's degree in engineering with a focus on Process, Mechanical or Manufacturing Engineering
• 3-5 years of experience in a process engineering or validation role, preferably in a manufacturing environment
• Proficient in process validation methodologies and techniques
• Familiarity with quality management systems and regulatory requirements in the manufacturing industry

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Monday - Friday
8.15am - 6.30pm

Basic + AWS + VB

Responsibilities

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints. • Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues. Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives. • Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements

• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus. Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Process Engineer/ Validation Engineer/ Equipment Engineer

• Working Hours: 8.15 - 5.45pm Mon -Fri
• Permanent Position / MNC
• Near Woodlands Interchange

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Prepare and execute process validation protocols (MVP/IOPQ) and reports for new and existing product, process and equipment with tooling, production, maintenance and quality personnel for all customers before mass production.
• Train on MVP/IOPQ to all concerned department/personal and prepare training records.
• Prepare instructions/procedures for the assembly processes, ECN/ECR/Deviation are drafted & executed.
• Execute engineering change notice (ECN)from customer/ in house and update ERP system promptly.
• Analyze defect reported in-house and customer with quality, tooling and production.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap, and perform internal quality system audit.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers
• To ensure all equipment on the mechanical assembly lines are in good functioning state.

Requirements

• Bachelor's degree in engineering with a focus on Process, Mechanical or Manufacturing Engineering
• 3-5 years of experience in a process engineering or validation role, preferably in a manufacturing environment
• Proficient in process validation methodologies and techniques
• Familiarity with quality management systems and regulatory requirements in the manufacturing industry

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Assistant Engineer, Production Process Support is responsible for running engineering evaluations, collecting and compiling of data with simple analysis, and part measurements. The incumbent will also manage change order (CO) activities as well as non-conformance part movements.

This position reports to the Production Process Support Manager and is part of the Manufacturing Engineering department located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Assist in running engineering evaluations
• Perform basic statistical analysis
• Understand and apply the process flow of non-conformance material and product change action

The essential requirements of the job include:

• Diploma/NITEC in Mechanical Engineering
• Relevant experience in lean manufacturing

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

This position is responsible for effectively leading the collaboration with business units across TE to achieve productivity and gross margin improvement that are aligned with TE strategy. The successful candidate is responsible for developing and executing the AI strategy to integrate and optimize the inhouse and external resources by influences. The person in this position must charter a strong AI related talent network among business units and AMT on transforming innovation practices into robust application processes with scaling up implementations. This role will leverage the leader’s experience in AI, manufacturing, assembly, and general management to build a strong network and increase the competitiveness in AI related advanced assembly, automation, and manufacturing technologies for TE.

This is an extremely hands-on role that provides the candidate with opportunity to join a high performing organization and highly visible development opportunities for future operation and manufacturing leadership within TE. The position will locate in TE Singapore AI Hub campus and will serve customers from multiple business units and manufacturing sites globally.

Key Responsibilities:

• Identify AI opportunities with multiple BU customers to facilitate their strategy of accelerating the short-term and long-term AI related roadmap on assembly and automation manufacturing.
• Develop and innovate AI related strategies for the transformational collaboration with BU customer to drive TE operational excellence through end-to-end approach from effective innovation, application, and scaling up implementation. Align the strategy with BU customer’s current to 5-year strategic roadmaps and make recommendation on the AMT prioritizations.
• Provide critical thinking and influence by contributing with AI related platforming and implementation of innovative solutions addressing the most challenge assembly and automation processes.
• Oversee and provide directions to AMT global AI projects with support to make sure they are meeting customer requirement on time, on performance, and on budget.
• Partner with the other AMT leaders to develop AI related strategic partnership with suppliers to meet global business needs, and to drive the supplier improvement plans with quality, delivery, and cost requirement.
• Partner with the AMT leaders, BU operation leaders and central operation functions to develop AI talents inside the organization, building AI automation and assembly talents competency for the company for sustainable growth.
• Drive continuous improvement culture change through collaboration and communication regarding AI related best practices knowledge sharing, internal and external benchmarking, talent development, and hands-on leadership.
• Promote a culture that reflects company’s values, encourages outstanding performance, and promotes positive work environment, encouraging inclusion and diversity to develop, coach, and mentor individuals in the team to fully unleash their potentials.
• Evaluate training needs and develop training and development plans to support high-performance teams.

Key Requirements:

• A Master degree in an Engineering or Technical discipline. A PhD engineering degree is strongly preferred. 5+ years operational and/or technical experiences in a technology environment/industry is also preferred.
• A strong talent with clearly demonstrated AI experience and a track record of AI innovating as well as AI deploying/scaling up new technologies via influence in matrix organizations. Understanding key SPAM process in TE is preferred. Experiences in chartering company-wide AI technology events with solid tangible results are strongly preferred.
• Capacity to make balanced decisions in best interest of the business and company with respect to people, investments, and total cost of ownership.
• Record of proven results in driving organization integration and innovating process for benchmarking and sharing best practices.
• Proven records of collaborating with multiple manufacturing/engineering teams and BU customers to develop strategy and execute AI and related projects with multi-years roadmap for productivity and growth margin improvement.
• Experienced in matrix management with a track record of being able to manage by influence and coordinate cross business unit activities.
• Demonstrated track record of taking initiatives, working in a fast-paced environment, and handling multiple priorities simultaneously.
• Passionate, resilient leader with experience leading change.
• Strong business acumen and customer orientation.
• Working knowledge of AI, P&L, cost saving strategies, and budget balances.
• Excellent communication and coaching skills at all levels from the shop floor to top management.
• Willingness to travel frequently, and as necessary, to support a global technology deployment in all regions.
• Strong global industrial experiences with time spent working and living abroad is desired.

Personal characteristics of the individual:

• High-powered individual with a persuasive leadership style and motivating management skills.
• Experienced transformational growth leader with a passion for AI automation and an inventive curiosity.
• High level of initiative and drive with a strong sense of urgency and accountability. Energetic, proactive, and hardworking to lead by example.
• Strong communications skills. Must demonstrates an open, honest, and transparent communication style with excellent interpersonal skills. Ability to explain complex topics concisely to a non-technical audience.
• Excellent judgment and experiences in an environment which requires emotional maturity, politically savvy, and the personal ability to interact with all types of personnel at various levels.
• Keen business judgment demands excellence and sets high standards for self and others. High-level of intellectual curiosity combined with strong problem-solving and analytical skills.
• Willingness and personal style to be a team player and foster a team environment, with the capacity and aptitude to serve as a leader in motivating and inspiring others.
• Impeccable ethics and integrity.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description

• Review engineering drawing & specifications, design and execute engineering experiments, calculations and statistical control for new products & processes
• Delivering engineering activities to support and improve the company’s manufacturing & supply chain operations.
• Ensure manufacturing processes are capable of meeting and continue to meet quality, cost, delivery rate and lead time requirements to customers.
• Perform trouble shooting & analysis of production & process issues. Perform process redesign where required.
• Identify opportunities for new or improved processes to meet current or future requirements.
• Perform new equipment & materials validation using standards involving IQ, OQ & PQ methodology.
• Source new suppliers, qualify specifications & perform cost estimation to price out project expenses.

Experience

• General awareness of Manufacturing Systems e.g. CAD, CAM, CAPP, Manufacturing Execution System, ERP & Technical Publications.
• General experience with work flow Simulation software & Robotics applications e.g. Flexsim & UiPath.
• Experience with write-ups on work procedure workflow & instructions for production process.
• Experience with statistical process control & other quality/performance control tools.
• Ability to apply ISO13485, GDPMDS & other ISO standards to existing operations & into new businesses.
• LEAN/Six Sigma practitioner.
• Knowledge of ISO requirements.
• Knowledge on end-to-end processes from technical/material qualification, supplier audit, process qualification to manufacturing & supply chain logistics engineering.
• Resourceful, able to independently conduct research & apply new solution to business requirements.
• Proven Project management skills.
• Good presentation skills.
• Independent, self-motivated, process oriented & analytical.

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Maintains product and company reputation by complying with federal and state regulations.
• Contributes to team effort by accomplishing related results as needed.

REQUIREMENTS

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Environmental/Health/Safety) or any related field
• At least 3 Year(s) of working experience in the related field is required for this position.
• Possess keen knowledge of water and wastewater treatment technologies and the industry in general
• Able to work independently and a multitasker/ able to cope in a fast-paced environment.

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492