Responsibilites

• Facilitate improvement projects initiatives derived from Quality, Process and
  Productivity concerns.
• Initiate process streamline on new device configuration leads to defect prevention.
• Participate with customers status of projects in-line with internal Quality issue improvement.
• Follow-up closely with supervisor & team to monitor improvement project status and closures.
• Perform regular monitoring and audit verification of the committed actionable
• Maintain updating of the relevant QMS system for QA (NPI/QCAR/FMEA/Control Plan).

Requirements

• Degree in Electronics or Engineering or related field.
• Basic knowledge in MS office (Word, Excel, PowerPoint).
• Good communication and interpersonal skills both verbal and written.
• Knowledge in basic manufacturing solving problem tools (8D, FMEA, Control Plan) and statistical tools (SPC) are an advantage.
• Highly motivated to learn new skills / systems / analytical tools used in manufacturing operations.

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Company Profile

M3’s client is an established company with many years of experience in the spray painting and powder coating services in Singapore. They specialize in coating for electrical & electronics consumer products, life science equipment, computer casing and machinery with all possible coating methodology.

Company Location

Woodlands

Working Hours

Mon – Fri: 830am – 530pm

5 day work week

Job Responsibilities

• Develop and optimize sheet metal manufacturing processes such as cutting, bending, stamping, punching, forming, welding, and assembling.
• Select appropriate tools, machinery, and materials for production.
• Create and refine process documentation, including process flowcharts, work instructions, and standard operating procedures (SOPs).

Job Requirements

• Technical Knowledge: Expertise in sheet metal materials, properties, and forming techniques.
• CAD/CAM Proficiency: Familiarity with software like SolidWorks, AutoCAD, or similar for design and simulation.
• Able to interpret engineering 2d Drawings.

Sophia Lu

R1100200

Senior Recruiter

At Coalesce Management Consulting, we are a community of people with a strong passion for excellence. We deliver bespoke project solutions within the Life Science and Technology sectors through our community of high-calibre industry specialists.

Position: Process Engineer

Job Description:

We are currently expanding our team and are looking for a process engineer on site with a client. In summary, you will be supporting the design, recipe design and testing, modification of process equipment, troubleshooting process equipment, and ensuring compliance with change control, deviation, and CAPA processes.

Key Responsibilities:

• Identify, and support implementation of engineering-based improvements or upgrades to the equipment or facility systems. This may include development of business case for improvement and identification of design requirements and then translation of requirements into process equipment/system design, specification and supporting the construction, startup, and validation of equipment.
• Support equipment maintenance programs, ensure the availability of spare parts, and coordinating maintenance execution as necessary to ensure systems are in proper working order.
• Ensure systems are installed and operating safety and in compliance with pertinent environmental health/safety practice, rules and regulations.
• Ensure necessary commissioning and qualification of systems is completed in alignment with GMP requirements and interact with regulatory inspectors as necessary.
• Providing troubleshooting support to reduce production downtime. This will involve leading and/or supporting technical root cause analysis and implementation of corrective/preventive action.
• Support new product/technology introductions by performing engineering assessments, implementing equipment modifications, and supporting engineering runs.
• Communicating proactively with supervisor and support staff, highlighting issues and proposing solutions
• Create, review, revise and approve technical reports and engineering documents such as URS, FS, SDS, P&IDs, etc.
• Serve as a lead in holding meetings for risk assessments and hazards analysis of SMEs s e.g. microbial control risk assessments.
• Support the technology transfer of new products/processes e.g. perform field testing.
• Collaborative Work: Collaborate with multidisciplinary teams to achieve project objectives.

Requirements:

• Bachelor's degree in a relevant life science field (e.g., biology, biotechnology, biochemistry). ·
• Excellent communication skills, both written and verbal, in English.
• Ability to multitask and work in a fast paced environment with competing priorities.
• Great team player. Strong interpersonal and communication skills and ability to develop close working relationships and work collaboratively with internal and external contacts at all levels

What’s In It for You?

• Exposure to the major Pharmaceutical Companies in the industry.
• Annual leave benefits.
• Full Health coverage and benefits.
• Training and Development allowance.

What's Next?

If you are interested in applying for this position, please send an email to [email protected].

Coalesce Management Consulting operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation, or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· At least 5 years relevant working experience in semicon/ manufacturing industry

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

The Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible to ensure the reliability and stability of semiconductor processes and achieve it through advanced testing, analysis, and collaboration with both internal teams and external clients.

Key Responsibilities:

• Develop and implement reliability assessment systems for semiconductor processes, including TDDB, HCI, BTI, PID, EM, and SM.
• Design and conduct reliability tests to evaluate process performance and durability, analyse test data, and provide recommendations for process technology improvements.
• Provide expert technical support to clients by diagnosing reliability issues, addressing their concerns, and delivering solutions to improve process performance.
• Assist the manufacturing team in managing abnormal events by conducting reliability risk assessments and suggesting improvements to mitigate risks.

Education Qualification & Essential Experiences:

• Bachelor’s degree or higher in Electronics, Electrical Engineering, Physics, or a related technical field.
• Minimum of three years of relevant experience in semiconductor process reliability engineering.
• Strong problem-solving skills and a detail-oriented approach with the ability to analyse complex data and derive insights.

Personal Attributes:

• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$6,500 – $8,000

Job Scope:

Software Development

• Design, Develop and Maintain device drivers for Windows Operating Systems
• Undertake WHQL testing and certification of drivers and device frameworks.
• Design, Develop and Maintain User Libraries and DLLs.
• Participate in all phases of SDLC and prepare corresponding documentation
• Undertake porting and maintenance of existing drivers to new frameworks and OS’s
• Resolve defects reported by internal and external customers
• Collaborate with USB host & device firmware development teams.

Job Requirement:

• Degree/Master’s in computer science/Engineering or related field.
• 5 years or above experience in the area of device drivers development, preferably USB
• In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs
• Excellent C Programming Skills.
• Professional attitude to work and meticulous in coding and testing
• Must have participated and experienced in SQA processes.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Responsibilities

• Process module ownership involving regE process characterizations and advanced process developments for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop regE processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer regE processes to high volume manufacturing (Fab10), and work on continuous improvements to manufacturability.
• Address specific wafer edge issues (such as bevel defects, uniformity issues), working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving regE process margins required for meeting the mature yield goal for 3D NAND parts.
• Initiate and manage experiments to widen regE process margins as well as to test out manufacturability of next node solutions
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Bachelors’ degree or higher in Materials Science, Chemical Engineering or Physics with minimum 2 years hands-on experiences in relevant regE process developments.
• Familiarity with regE process developments and yield improvements.
• Understanding of various integration and structural impacts and constraints related to wafer edge.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization/development to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with equipment/material suppliers to achieve yield, quality, cost and risk management objectives.

Micron’s NAND Technology Integration (NTI) Singapore R&D group is looking for process development engineer to support R&D activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 3 years hands-on experience in leading edge film deposition/implant technology work. Fresh PhD/Masters graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are also welcome to apply.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

• Working Location: Jurong Island
• Working Hours: Weekdays, 8am to 430pm
• Transport from Jurong East MRT
• Basic Salary: $4500 - $5500

Objective:
To ensure the safe, efficient, and reliable operation of mechanical systems by overseeing maintenance activities, improving maintenance management systems, and optimizing equipment performance to support operational goals.

Job Scope:

• Oversee and supervise in-house and external contractors for mechanical maintenance activities.
• Manage daily, transition, turnaround, and upgrading maintenance projects.
• Ensure compliance with HSEQ standards, statutory requirements, and industry best practices.
• Establish and improve maintenance management systems to ensure equipment reliability.
• Maintain accurate maintenance records for analysis and troubleshooting.
• Conduct root cause analysis and implement corrective/preventive actions.
• Optimize and manage spare parts inventory for critical and non-critical equipment.

Requirements:

• Bachelor’s Degree in Mechanical Engineering.
• Minimum 3 years of experience in a chemical process plant.
• Familiarity with static and rotating equipment.
• Strong analytical and problem-solving skills.
• Ability to work well under pressure and collaborate across functions.

We regret that only shortlisted candidates will be notified.

Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu

Registration Number: R24124814

EA License Number: 02C4944

People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705

http://www.peopleprofilers.com

The incumbent will develop, evaluate and improve manufacturing flows and methods.

develops, implements and maintain methods, operation sequence, processes and systems in the manufacture of sub-assemblies, precision cleaning and final assemblies of laser system

Set up an maintain bill of materials, process flow and routing, process layout

Estimates manufacturing cost, determines time standards, and make recommendations

Requirements:

• Bachelor's degree in engineering
• At least 3-5 years' experience in manufacturing engineering process focus
• Strong communication and teamwork abilities
• Proficiency in Oracle System, an advantage

Interested candidates, please forward your most recent resume to [email protected]

General Description

• Responsible as Operation’s facility engineer for the development of Terminal’s new LNG Trucking facility. Incumbent shall support the Project team, ensure the Operability & Maintainability aspects of the new facility are taken care during engineering, design and construction phases. Incumbent shall also develop and execute “Ready to Operate” plans for the facility;
• Incumbent shall work closely as a team with Production Shift Teams, Maintenance Team and other Process Engineers providing process engineering expertise ensuring the Terminal and Trucking facilities operates safely, reliably and efficiently;
• Incumbent shall liaise closely with Commercial team to ensure the Terminal delivers the required services, inclusive of Jetty Operations, Gas supply and Trucking are incompliance to regulations, procedures and contractual agreements

Roles & Responsibilities

The incumbent roles include but not limited to following scope of tasks and duties:

• Evaluate operations activities, make recommendations and execute continuous process improvements in the areas of operational excellence;
• Recruit, train and supervise the Trucking Technicians assigned for operating the Trucking Facility.
• Lead troubleshooting, inspections, reviews and investigations of equipment or process system to support optimisation, drive root cause analysis and formulate remedial resolution. Incumbent shall also investigate Customer’s complaints related to equipment and process systems;
• Review the adequacy of standard operating procedures(SOP) to ensure safe and reliable operations with operational design limitations, includes commissioning, operations and maintenance phases of facilities;
• Provide specific instructions to Production Shift Teams, Maintenance Team, Trucking Team and Laboratory on LNG transfer operations, trucking, stowage plans and samplings requirements;
• Liaise with stakeholders in ensuring LNG surveyor’s reports, certificates of quality are accurate and consistent as per the procedures;
• Diligently review maintenance plans, method statements and risk assessment on the process safety aspects for the maintenance work related to the assigned equipment and systems;
• Compile data and measure Terminal’s performance including service availability and efficiency;
• Undertake alarm management for assigned area and proactively drive alarms analysis to ensure robust operations;
• Take lead role for Management of Change(MOC) for facilities modification, as required;
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, 3D models, Safety Integrity Level, RAM analysis, design layout and process safety requirement in alignment with regulatory and business objectives;
• Report HSSE near miss/violation. Take an active role in HSSE activities and green initiatives;
• Assigned specific role and responsibility in emergency response;

Work Experience

• Minimum of eight (8) years work experience in process engineering function in an oil, gas and petrochemical facilities, complex utility, cryogenic or trucking facilities;
• Conversant with local/international codes, regulations, standards, best practices, equipment inspection and schedule requirements;
• Knowledge of installation, commissioning, start-up, maintenance and troubleshooting of processes system in oil, gas or petrochemical industry;
• Knowledge of Process Safety Management, Electrical, Instrumentation, Controls or Mechanical systems;
• Experience in Process Simulation (e.g. Hysys/Unisim or equivalent), Design Softwares(e.g. Fisher Specification Manager, Hydraulics, PSV sizing) or other related process software an advantage;
• Experience in Engineering design analysis including preliminary design development, heat and mass balance calculation, technology evaluation and equipment selection preferred;
• Experience in dealing with consultants and contractors involved in the Oil & Gas sector, including external agencies, utilities and government organizations;
• Basic knowledge of ship-shore interface and cryogenic transfer operations an advantage;
• Capable of lead and guide technicians ensuring the works are executed safely and effectively;

Education

• Incumbent must possess a Degree in Chemical Engineering from a recognised university.
• Process Engineering background with Mechanical and Instruments knowledge.

Responsibilities:

• Design, develop, and maintain software applications using C#.
• Develop and implement automated test equipment and process systems.
• Write clean, scalable, and efficient code.
• Troubleshoot, debug, and upgrade existing software.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Participate in code reviews to maintain code quality and share knowledge.
• Ensure software meets all requirements of quality, security, modifiability, extensibility, etc.
• Document development processes, code changes, and other relevant information.
• Support internal and external BUYOFF, ensuring completion of Factory and Site Acceptance with customers and the project team.
• Quickly resolve issues by working with the project and production teams.

Requirements:

• Bachelor’s degree in Engineering, Computer Science, or a related field.
• Proven experience as a software Development Engineer or similar role.
• Strong proficiency in C# programming.
• Experience with test equipment and automation process systems.
• Knowledge of electrical and electronics hardware.
• Familiarity with test instrumentation and motion systems.
• Basic understanding of vision systems.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.
• Knowledge of hardware interfacing and control systems.
• Experience with CI/CD pipelines and automated testing frameworks.

• Singapore Based (Tuas)
• Monday to Friday (8am to 5pm)
• Basic: $3800 to $4300 + site allowances + Transport Allowance
• Joining Bonus
• Bachelor in Chemical Engineering; Min 1 years of process industry experience
• Career Progression Opportunities

Responsible for developing and implementing process strategies, managing process resources, optimizing current processes, and maintaining process documents.

Job Specifications

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement
• and Safety Management

Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown
• To undertake any other assignment given by the Management from time to time.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As an Associate Process Engineer, you will work on monitoring and sustaining process / SPC to ensure quality of products are meeting specification.

Your Job:

• Analyze SPC charts using SPACE
• Respond to all PR rules and follow CAS correctly.
• Work on basic annotation and achieve quality troubleshooting rate for SPC OOC points.
• Monitor all qualified processes using SPC and other statistical tools.
• Perform shift duties (12-hours shift) to support the running of production in the Module and ensure that integrity of the tools is in place to run the process.
• Assist Engineers in the qualification and fine tune of new processes and new equipment for production.
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements, and programs

Required Qualifications:

• Diploma in any Engineering streams
• Experience in wokring with Electronics / Manufacturing sectors
• 1-2 years of experience in working with SPC tools
• Good understanding of the SPACE
• Willingness to work in weekend / rotational shifts

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Introduction:

We are expanding our Fab Operations and are looking for Process Engineers, in this role you will sustain and improve process / SPC to meet quality, cost, productivity requirements. Process improvement to eliminate inherent process weakness to achieve company goals.

Your Job:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance.
• Do proper annotation to maintain quality troubleshooting rate for SPC OOC.
• Understand Cp and Cpk indices.
• Monitor critical SPC charts daily.
• Perform process window study and provide improvement plan to reduce OOC and improve CPK.
• Review ESPC charts using SPACE.
• Know all the rules for ESPC.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Raise PCRB and understand the requirement for PCRB opening, follow through with qual plan, analyze data using required software and CR closure.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues.
• Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline.
• Work closely with Equipment Engineer on new equipment acceptance.

Required Qualifications:

• Degree in electrical / electronic / Mechanical / Microelectronics / Chemical process Engineering / Chemistry / Physics
• 2 years of working experience in electrical / electronics industry
• Team Player
• Good ownership and accountability
• Good verbal and written communication skills
• Flexible and able to support overtime
• Self motivated, meticulous, and discipline
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

This role is responsible for one of the front-end process modules in Office Printhead or PageWide Printbar manufacturing lines and required to apply subject matter knowledge to drive technical and operational excellence in the manufacturing processes. Expected also to work on problems of diverse complexity and scope.

May participate in project team activities and facilitates information validation and team decision making process. Exercises independent judgment within generally defined policies and practices to identify and select a solution. Ability to handle most unique situations. May seek advice in order to make decisions on complex business issues.

Responsibilities

• Designs engineering solutions, including methods, operation sequences, and processes for the manufacturing of parts, component sub- assemblies, and final assemblies, based on established engineering principles and in accordance with general specifications and requirements.
• Lead issue diagnosis and problem-solving, using a systematic problem solving approach.
• Work in a project team of other manufacturing engineers and internal and outsourced manufacturing partners to develop and execute reliable, cost effective and high quality manufacturing solutions for moderately-complex products from new- product introduction through end of lifecycle.
• Delivers professionally written reports, and supports realization of operational and strategic plans.
• Collaborates and communicates with management, internal and external partners in outsourced manufacturing or development r regarding process and standards compliance, recording and reporting issues, and recommendations for problem resolution for manufacture of existing products.
• Represents the manufacturing engineering team for all phases of larger and more- complex development and manufacturing projects.

Education & Experience Recommended
• Bachelor’s or Master’s degree in Manufacturing engineering, Mechanical Engineering, or any other manufacturing related discipline
• Typically has 2-4 years of work experience, preferably in product/process engineering, or a related field or an advanced degree with 0-2 years of work experience.

Knowledge & Skills

• Using engineering tools and software packages to design and automate manufacturing processes.
• Strong analytical and problem-solving skills.
• Competent in adopting manufacturing methodologies such as Lean Manufacturing, Continuous Improvement etc.
• Understanding of material properties and hardware and electrical component design.
• Using empirical analysis, modeling and methodologies to validate manufacturing process and tooling design and specifications.
• Proficient in English. Good written and verbal communication skills.
• Ability to effectively communicate ideas to stakeholders
• Competency in Industry 4.0 technologies/Digitalization/Data Analytics is a plus.

Impact & Scope
• Impacts immediate team and acts as an informed team member providing analysis of information and limited project direction input.

Complexity
• Responds to routine issues within established guidelines.

Disclaimer
• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our PHOTO Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

Primary Purpose

Functions as a technical specialist in water / wastewater treatment process. Performs all aspects of conventional design engineering and analysis independently. Broadens knowledge and skill set in area of discipline. Knowledge in other disciplines and/or functional areas.

Roles & Responsibilities

• Detailed design of process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants, sludge treatment plants, desalination process, etc.
• Detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems.
• Preparation of Process Flow Diagrams and P&IDs.
• General Arrangement and equipment layout drawings.
• Preparation of process equipment specifications.
• Review and evaluation of vendor submissions.
• Coordination with other disciplines e.g. civil, structural, electrical, mechanical, building services, instrumentation & control designers and digital water specialists.
• Able to lead meetings, HAZOP, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Prepare testing and commissioning plans
• Process Testing & Commissioning
• Keeping abreast with latest development in water treatment technology and suitably applies in the design

Candidate shall have minimum of 12 years’ experience in the process design of water / wastewater treatment (municipal and industrial) with the following attributes:

1. Degree in Chemical or Environmental Engineering.
2. Expertise in water / wastewater treatment process modeling and optimization (including biological treatment).
3. Proficient in BioWin/GPS-X/SUMO or other wastewater modelling software.
4. Possess knowledge of wastewater treatment processes such as Activated Sludge, SBR, MBR & MBBR/IFAS.
5. Experience in preparing PFDs/P&IDs and specifications for procurement of water and wastewater process equipment.
6. Proven ability to manage diverse and large scale water projects, prioritize tasks, effectively.
7. Utilize available resources and ensure timely completion of projects.
   Proficient in written and oral communication with good interpersonal skills.

Day Technician

• Work Location: Jurong (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range : $2200 - $2500 + $200( Site Allowance )

Responsibilities:

The Day Technician is responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations.

• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan.
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance.
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator.
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning.
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement.
• Any other duties as assigned.

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin