Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Provide process engineering expertise for process design, process scale-up, trouble-shooting and process efficiency improvements. Interrogate laboratory working directions to determine optimum plant configuration to ensure that the process [chemistry + plant] meets the scale-up objectives in a safe manner. Support capital projects for R&D Jurong.

Key Responsibilities

Lead process engineering activities for NCE projects in the pilot plant

• Review of chemistry scale-up requests with Chemists, Operations and Engineering to determine optimum plant configuration.
• Define detailed plant and modification design. The time period for introducing new chemistry onto plant is usually less than 4 weeks, during which time any new equipment requirements must be identified, designed, fabricated, installed [by on-site staff or contractors], commissioned, tested and operating staff trained in use before chemical processing starts.
• Agree level of hazard assessment with Operations and complete Process Risk Assessment.
• Review batch record, carry out installation checks, write WI [Work Instruction] or SOP [Standard Operating Procedure] as required and train operators.
• Support campaign on plant, troubleshooting any engineering issues.

Technology Transfers

• Generate sufficient process engineering information for GSC to ensure that the process can be effectively introduced into the desired production plant.
• Support synthetic organic chemists, process safety scientists, and process chemists in the design of processes suitable for effective scale-up.
• Assess critical process characteristics and requirements as well as existing plant capabilities and limitations by gathering and interpreting suitable experimental data.
• Significantly contribute to the development of robust manufacturing processes for the synthesis of bulk drug substance by evaluating alternative processing strategies and recommending potential process improvements.
• As a member of the ChemDev project team, identify and effectively communicate the best suitable scale-up strategy for a process including recommendations for the application of new processing technologies.
• Play an important role in facilitating a seamless technology transfer of processes to GSC by the application of state-of -the-art tools and procedures.

Capital Projects

• Act as client representative for capital projects, to ensure all the customer needs are incorporated into the design and installation of new plant and equipment.
• Identify areas of weakness in the portfolio of processing technologies (plant and equipment) and submit proposals to address these.
• Define and seek approval for the detailed project scope of plant and equipment projects, and obtain approval for capital orders and PIP's.
• Review and make recommendations on design proposals put forward by contractors, project engineers, and equipment suppliers.
• Organise HAZOP studies, act as technical recorder, and issue HAZOP report for all installations where appropriate.
• Issue commissioning programmes, lead commissioning activities, and issue final reports.
• Carry out pre-delivery inspection visits for new equipment, prior to acceptance on site.
• Compile equipment WIs.

Knowledge, Skills & Experience

• Min A level certification
• Experience in pharmaceutical industry
• Experience in pharmaceutical process
• In depth working knowledge of the safety and compliance requirements for equipment and systems used in it.
• Strong written and verbal communication skills.
• Ability to multi-task and prioritize workload

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

• 5 days, Boon lay, Transport provided to & fro
• $4000 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Jurong West, Transport
• $4000 - $4700 basic salary, 1mth AWS, performance bonus
• Medical/dental benefits
• Able to start within short notice/1 month

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• MNC (Manufacturing) - Cable & Connection Technology

• Working Hours: Monday - Friday: 8.30am - 5.30pm

• Working location at Tuas

• AWS + Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing process elements.
• Create Bill of Materials structure.
• Create manufacturing Work Instructions and other process documents in collaboration with the Program Management, Production and Quality Assurance Teams.
• Carry out time studies and update the process cycle times.
• Provide timely technical support to the Production Team pertaining to manufacturing process and quality issues.
• Engage in DFM and Lean Line Design activities.
• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.
• Actively and continuously improve the work processes to improve work efficiency and quality.
• Work with Program Management, Production, and Quality Assurance Teams to identify potential process risks and make recommendations to mitigate these risks.
• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Requirement

• Diploma in Electrical, Mechanical/Mechatronics, Manufacturing/Production, Industrial Engineering or relevant discipline
• 2 - 3 years of relevant experience in manufacturing process engineering
• Possess experienced in the creation Bill of Materials structures will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Roles & Responsibilities

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.
• Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Perform site EHSS inspection/audits and ensure that all corrective/ preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.
• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.
• Operational hands-on experience
• Safety conscious

Education:

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Transport Pick Up: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun
Location: Tuas
Contract Duration: 1year
Salary: Up to 6K

Job Description:

• Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe / models.
• Carry out technical assessment for evaluation of processes
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensure the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians and fellow process engineers on the process and procedures as required.

Requirements

• Min Degree in Engineering, preferably in Chemical Engineering or Degree in Science with Major in Chemistry
• Has min 2 years of experience
• Demonstrated ability to provide technical solutions for complex problems through equipment and process understanding
• Working knowledge of Regulations, and Good Manufacturing Practices (GMP)
• Proactive, has experience with high performance teams, strong interpersonal and project management skills

If interested, please email your resume to [email protected]
➖
Alex Goh Hock Leong
(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

(A) Primary Function

1. Responsible for all engineering related activities of the product line concerned.

2. Responsible for quality of products at all stages and drive production yield.

3. Identify and initiate actions to prevent occurrence and recurrence of product, process, quality systems nonconformities.

4. Work as a team with all departments to achieve mutual agreement on specification required by customers.

5. Ensure all products meet the standard cycle time and minimise machine and mold down time.

6. Implement improvement plans to enhance efficiency of process, material and manpower.

7. Responsible for new RFQ enquiry and advise the management the feasibilities for mass production.

8. Responsible for resolving discrepancies and technical issues related to product with customers.

(B) Duties and Responsibilities

1. Establish optimum process parameters and meeting specific cycle time for new product.

2. Analyze defect reported in-house and customer with quality, tooling and production.

3. Responsible to test and qualify all new molds by applying systematic molding that includes Load Senstivity Test, Viscosity/Shear Rate Test, Gate Freeze Test, Thermal Mapping of Mold, Short Short Test etc.

4. Must perform DOE on molding process parameter for process window study.

5. Attend to all daily quality and process related issues.

6.Prepare and execute process validation protocols and reports for new and existing products with tooling and quality personnel for all customers.

7. Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

8. Perform internal quality system audit.

9. Train and assess production staff on processes as well as WI as and when required.

10. Attend routine production and quality meetings.

11. Execute engineering change notice from customer/ in house and update ERP system promptly.

12. Compliance to all regulatory and in house system requirements especially for medical and automotive customers.

C) Qualifications / Requirements

1. Degree/Diploma in Engineering-related discipline, preferably in Polymer and Plastic technology, Mechanical.

2. At least 3 years related experience/knowledge in Plastic Injection Molding, preferably in medical and automotive industries.

3. Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.

4. Possess strong leadership, positive attitude, analytical and good interpersonal skills.

5. Results-oriented, meticulous and a self-motivated team player.

• MNC (Manufacturing) - Cable & Connection Technology

• Working Hours: Monday - Friday: 8.30am - 5.30pm

• Working location at Tuas

• AWS + Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing process elements.
• Create Bill of Materials structure.
• Create manufacturing Work Instructions and other process documents in collaboration with the Program Management, Production and Quality Assurance Teams.
• Carry out time studies and update the process cycle times.
• Provide timely technical support to the Production Team pertaining to manufacturing process and quality issues.
• Engage in DFM and Lean Line Design activities.
• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.
• Actively and continuously improve the work processes to improve work efficiency and quality.
• Work with Program Management, Production, and Quality Assurance Teams to identify potential process risks and make recommendations to mitigate these risks.
• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Requirement

• Diploma in Electrical, Mechanical/Mechatronics, Manufacturing/Production, Industrial Engineering or relevant discipline
• 2 - 3 years of relevant experience in manufacturing process engineering
• Possess experienced in the creation Bill of Materials structures will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

As a Process Gas Chromatography application engineer, you would be responsible for designing, developing, and optimizing gas chromatography systems. Your work would involve ensuring the proper functioning of gas chromatography instruments, troubleshooting issues, and providing technical support.

Responsibilities:

• To provide active support to gas chromatography tuning, preparation of GC operation data and report.
• Gas chromatography tuning involves columns installation, operation data collection, and handling of gas and liquid cylinders.
• Ability to troubleshoot gas chromatography issues.
• Support the manager to ensure the quality of the GC produced and to ensure the cleanliness and safety of the lab.
• Support the department on the daily operation activities.

Requirements:

• Minimum Degree in Chemical engineering/Chemistry/ Chemical Process, or any related module is preferred.
• Minimum 5 years of working experience as a Process Gas Chromatography Application Engineer, who is familiar with gas chromatography principles, operation, calibration, and data analysis is essential
• Proficiency in microsoft office.

We regret to inform that only shortlisted candidates will be notified.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

As an Operations Central Team Senior Engineer, Spares Engineering, you will be a member of the worldwide front end manufacturing team responsible for driving improvement with spare part management. This position is dependent on partnership with Central Process Equipment Engineering, Process and Equipment Engineering, Cost Teams, Global Procurement, Global Quality, and other business partners to achieve Micron’s strategic objective and goals.

Responsibilities :

• Lead/Support the spare management improvement activities with multi-functional groups such as Technology Development, Manufacturing, Global Procurement and internal Operation Central Team to meet Global Operation’s Strategies Programs - Cost/Scale/Quality/Cycle Time (Speed) goal
• Provide technical consulting and hands-on assistance to Fab area teams to create and/or identify the best solutions, solve existing solutions, and deploy new solutions.
• Promote worldwide sharing and transfer of area-specific domain knowledge
• Lead or drive standardization between sites regarding spare management issue, reports, and systems through the System Workforce Allocation Team (SWAT) or other appropriate means.
• Monitor and communicate progress to collaborators
• Maintain program support through interaction with senior leaders
• Improve Spares performance thru supplier engagement, and design & customize parts thru partnership with spares supplier
• Lead spares quality project management to improve spares quality performance

Qualifications Requirements:

• Good communication skills
• Bachelor's degree in engineering
• Minimum of 5 years experience in equipment engineering at a semiconductor company
• Dry-etch experience preferred, but open to other process areas as well
• Wafer manufacturing spares cost management experience preferred
• Project management experience preferred
• Spares quality related experience preferred
• Open to business travel based on business needs.

Job Profile(s):

FAB Engineer 3 - FAB Engineer 5

Relocation level: (TBD)

Responsibilities:

• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety/quality, reduce energy consumption, improve production capacity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Coordinate, arrange and plan new grade trial run with R&D and Operation team, and handle the trial run and the evaluation.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk.
• Troubleshoot process issues, perform root cause analysis and propose corrective and preventive measures.
• Participate actively in HAZOP , FMEA and Control plan studies as Process engineering function for safety and quality improvement.
• Oversee Process related capital expenditures project from conceptual design up to Front End Engineering Design (FEED).
• Study and implement Industry 4.0 related technologies as part of Productivity Improvements and Process improvement Projects
• Participate in Company EHSQ program and cooperate with its promotion and improvement.
• Collaborates with other departments in Management systems such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC.

Requirements:

• Bachelor / Master’s Degree in Chemical Engineering is a MUST.
• 2-3 year(s) of working experience in Petrochemical Industries (Preferred) / manufacturing industries with Engineer capacity scopes.
• Knowledge in IATF 16949/ IEC 61511, ISO9001, ISO14001, ISO45001 and SS651 Standards.
• Using Process Simulation software such as Aspen Plus®/ Aspen HYSYS®.
• Familiarity with Distributed Control System (DCS), in particular its logic and sequence modification.
• Familiarity with Safety Case Regime.
• Able to multi-task and handle a wide spectrum of responsibilities.
• Good interpersonal skills and strong analytical skills.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• West, 5 days, Transport provided to & fro
• Basic salary: $3500 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits
• No experience can apply
• On-the-job training is provided

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• 1-2 years of relevant experience.
• Candidates with no experience can apply as on-the-job training is provided.
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• 
  
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Senior Process Engineer, APM (URGENT/ Pharma/ API Technology)

Location: Tuas

Up to $8,000 depending on experience

Industry: Pharmaceutical

IMMEDIATE VACANCY

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Job Summary:

• Supporting the technical department and operations team on process technology and developing science driven solution.

Responsibilities:

Production monitoring/ Process improvement:

• Ensure that key attributes of the process (performance, CPP, CQA) to reduce variability are monitored and initiate/lead and implement process optimization ideas with the view towards improving efficiency, quality, robustness, yield and cost savings.
• Review continued process verification trends (CPP, CQA, & Yield), identify improvement levers and identify/ prioritize and plan process robustness initiatives including aligning with the Continuous Improvement (CI) Specialist , QA specialist and MSAT.
• Participate in CI meetings and yield meetings and lead in some Quick-Wins/ CI projects/ actions.
• Execute or support CI projects related to process robustness issues
• Lead for Process Validation, Process Performance Qualification and qualification of associated equipment by planning the activities and oversee the progress of the qualification.
• Lead/ Implement new product introduction and improvement strategies such as PAT technology and yields program.
• Lead the root cause analysis for process robustness deviations (Eg. DMAIC), propose and implement the CAPA in deviation reports. Actively link with other troubleshooting functions including PCU QA Specialist and PCU Asset Care Specialist in Technical department.
• Engage and work with people from multiple disciplinary functions for the change control, root cause analysis and other discussions.
• Perform technical and quality impact assessment for the new CI projects, plant modifications, process changes to ensure all modifications to plant, process and any risks have been reviewed and assessed appropriately from a process engineering viewpoint to ensure no unintended negative impact.
• Prepare and update batch record sheet, cleaning record sheet, SOP, qualification protocols and reports.
• Prepare and implement cleaning validation, process risk assessment using FMEA methodology.
• Prepare and conduct process training for operations team. Train and provide guidance to the junior engineers/chemists.
• Lead technology transfer project of new or existing chemical process to/from other sites when necessary.
• Participate in safety reviews/audits on plant, process and equipment. Ensure safe working in all areas of work by practicing and communicating safety.
• Participate in HAZOP and process safety analysis.
• Ensure compliance with HSE, Quality policies, cGMP requirements and defined procedures.

Requirements:

• Degree in Chemical Engineering.
• Knowledge of process engineering, hands on experience on API technology, plant operations, continued process verification, PAT and process control/automated systems.

Lim Pey Chyi - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

• Basic Salary: $6,000 to $8,000 Basic + $1,000 Transport allowance + Mobile + Sales Commission

• Possess sales experience in SEMICONDUCTOR FRONT END PROCESS

Our client is a Europe MNC & a global leader of instrumentation equipment in the semiconductor industry.

Responsibilities:

• Manage & grow client base from MNC to SME
• Achieving or exceed sales & revenue targets
• Support, perform & coordinate instrument demo to clients
• Manage complex sales with ability to sell across different levels within accounts

Requirement:

• Diploma or Degree
• Possess Sales experience in Semiconductor Front End process
• Proficient in Chinese to coordinator with Chinese speaking clients

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

Jobscope

• Develop Manufacturing/Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe/Models.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensuring the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians on the process and procedures as required.
• Ensure we adhere to our approved procedures and update these as required.
• Own one or more multiple equipment/GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Requirements

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science with major in Chemistry, biomedical science
• Preferably 0-3 years’ experience in a relevant manufacturing environment.
• Able to commit to rotating shift

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA License Number: 99C4599

Duties & Responsibilities

1.Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.

2. Implement Process Improvement idea via Management of Change system and/or Non-regular work system.

3. Coordinate, arrange and plan new grade trial run with R&D and Operation team, and handle the trial run and the evaluation.

4. Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to plant instability, safety or quality issues.

5. Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.

6. Participate actively in HAZOP , FMEA and Control plan studies as Process engineering function for safety and quality improvement.

7. Oversee Process related capital expenditures project from conceptual design up to Front End Engineering Design (FEED) and Lead the project assigned by (assistant) manager of department.

8. Study and implement Industry 4.0 related technologies as part of Productivity Improvements and Process improvement Projects

9. Participate in Company EHSQ program and cooperate with its promotion and improvement.

10. Collaborates with other departments in Management systems such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC plus as process engineering function

11. Perform study as Process Engineering Function such as NRW, MOC and as per request from other departments.

12. Keep and maintain safe and health work environment.

Requirements

1. A Bachelor / Master’s Degree in Chemical Engineering

2. 3 year(s) of working experience in Petrochemical Industries (Preferred).

3. For Senior position, at least 5 year(s) working experience in Petrochemical Industries.

4. Possession of Singapore Certified Energy Manager (Preferred)

5. Familiarity with Safety Case Regime

6. Familiarity with IATF 16949 standard (Preferred)

7. Familiarity with ISO9001, ISO14001, ISO45001 and SS651.

8. Familiarity with IEC 61511 standard (Preferred)

9. Familiarity with Process Simulation software such as Aspen Plus®, Aspen

HYSYS®.

10. Familiarity with Distributed Control System (DCS), in particular its logic and sequence modification.

11. Able to multi-task and handle a wide spectrum of responsibilities.

12. Good interpersonal skills and strong analytical skills.