• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

· Planning, coordination, and execution of substation automation projects.

· Design, costing and integration of substation automation systems according to project requirements.

· Installation, testing and troubleshooting of substation automation systems at site.

· Preparation of project documents and drawings.

Requirements:

· Diploma in Electrical Engineering/Computer Engineering

· Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

As a Senior Engineer in PDE (Package Development & Engineering) at Micron, you will be responsible for the Advance Packaging success within your scope in Metro Real-time Defect Analysis (MRDA) and guided by functional objectives, in terms of process, equipment and materials definition, development and/or optimization. You will manage and optimize your area's performance to meet or beat defined metrics. You will apply extensive knowledge to carry out tactics and collaborate with internal and external partners to build and implement packaging technology roadmaps aligned to corporate strategic objectives. You will provide advice to senior management related to tactical decision for the function. You will interact with executives, major customers and/or site managers to provide consultation, influence decisions and identify and resolve critical issues.

Identify, select, and evaluate new process, equipment and/or technology to support current and future requirements for MRDA area

• Define, development and establish new process, equipment design and/or capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new process, equipment capabilities and/or solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Actively participate in Package Development Engineering activities
• Conduct equipment benchmarking to establish the equipment suppliers and platforms for current and future need
• Create decision matrix for equipment and material selection
• Generates and set-up ADC, set-up/improve recipes
• Set-up PMON, Sampling Plans, BKM, CIP Strategies & performance indicators

Installation and qualification of new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional team
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives/personnel
• Establish the feedback loop for Continuous Improvement after mass volume production

Define, improve and/or maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

• Maintain knowledge of design constraints and weakness of existing platform
• Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:

• Bachelor's/ Master's/ PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• 4 or more years of experience with proven track record of technical leadership in semiconductor manufacturing, preferably in MRDA Process & Equipment Engineering. Experience in other Front End areas, in Post Wafer Fabrication & High Bandwidth Manufacturing technology is of greater advantage.
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill
• Hands on in recipe development for inspection and measurement workstation such as KLA, Rudolph, Nordson, CAMTEK preferred

Keen on the role? Apply now!

ROLES & RESPONSIBILITIES

• Implement appropriate safety measurements in accordance with the Workplace Health and Safety Act
• Enforce all safety requirements and company safety rules and regulations
• Conduct regular site checks and take appropriate corrective actions
• Conduct regular inspection to ensure ECM and environmental plan in place
• Maintain and update all WSH records, certificates and reports in accordance with WSH legislation
• Investigate accidents, incidents, or near misses to determine the root causes and prevent future occurrences.
• Maintain accurate records related to safety training, incidents, inspections, and compliance activities.
• Stay current on industry best practices and continuously seek opportunities to improve workplace safety.

REQUIREMENT /QUALIFICATION

• Registered WSH Officer with MOM
• Minimum 3 years relevant working experience in construction industry
• Occupational Safety Management (including fire & safety management)
• Experience in Private Housing/JTC will be advantageous.

Please include the projects you have worked on in your resume.

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Handle post-sales activities of related products and solutions.
• Engage in the implementation of large-scale projects.
• Offer on-site services, including deployment, testing and preparation of documentation.
• Provide technical assistance to maintain high levels of customer satisfaction.
• Troubleshoot customer inquiries by leveraging existing knowledgebase resources and resolving known issues.
• Be available for standby support to manage 24/7 maintenance calls.
• All other adhoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ IT support experience.
• Certified CCNA or CCSA is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

1. To carry out all responsibilities of a Site Supervisor in a Construction site

2. Able to train skills for both carpenters and rebar workers

3. Min 10 years relevant experience in the related field for this position

4. Be able to work independently with minimum guidance

5. Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

6. Ensure a consistently high standard of work is produced in accordance with specification and quality standards through regular quality inspections with sub-contractors.

7. To oversee daily operation at site. Direct and supervise day to day operations of sub-contractors ensuring appliance of common operational procedures.

8. To ensure that workers comply with all safety measures required. Require to carry out the effective implementation of work safety programme.

9. Liaise with sub-contractors Manager/Project Manager, Site Manager/Agent, and Contract Surveyor regarding cost control, waste management, variations and confirmation of instructions.

Key Responsibilities:

• Develop both backend and frontend software using Python, SQL, REST, JavaScript, and TypeScript with the Node.js and React framework.
• Write clean, efficient, and maintainable code, adhering to software engineering best practices.
• Utilize DevSecOps tools for code deployment and version control.
• Deploy solutions in cloud environments with CI/CD integration.
• Deliver enterprise AI projects, products, and platforms, focusing on scalability and reusability.
• Conduct technical pilots and feasibility studies to explore new opportunities, transitioning successful pilots into scalable production implementations.
• Develop integrations with other applications and services.
• Create unit tests for both positive and negative test cases.
• Provide support for application releases and second-level troubleshooting.
• Stay updated with the latest advancements in software engineering and technology.
• Participate in Agile ceremonies to contribute to prioritized projects and features.
• Collaborate closely with cross-functional teams, including product managers, data scientists, and software engineers, to understand requirements and deliver AI-driven solutions.

Requirements:

• 2+ years of hands-on experience in software design and coding, building robust and scalable solutions using Python, SQL, REST, JavaScript, and TypeScript (Node.js + React framework).
• Experience developing data-intensive applications using modern technology stacks, including cloud services (AWS, Azure), data pipelines, and SQL/NoSQL databases (experience with graph databases is a plus).
• Expertise in designing, architecting, and maintaining applications.
• Proficiency in building and consuming web-based APIs.
• Familiarity with CI/CD environments, test-driven development, and version control systems.
• Strong collaboration and communication skills for cross-functional team engagement.
• Experience in unit testing and a variety of testing strategies, including performance testing.
• Good understanding of system integration patterns.

Preferred:

• Experience working within Agile methodologies.
• Knowledge in areas related to artificial intelligence, machine learning, and data science.
• Familiarity with Generative AI solutions and applications.
• Experience working with AWS Cloud.
• Proficiency in building, deploying, and managing Docker images.

Education:

• Candidates are evaluated on a case-by-case basis, with preferred qualifications in quantitative, scientific, or technology disciplines such as Mathematics, Statistics, Computer Science, Data Science, Analytics, Physics.

Interested candidates who wish to apply for the advertised position, please clock on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

• Well Established Company
• Basic $3200 - $3700 + Shift Allowance + OT (Gross $4800 - $5500)
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• 12 Hours Shift
• Experience in Water Treatment Plant

Job Responsibilities:

• Study and review the equipment and Design treatment processes in wastewater treatment plants. Be responsible for the water quality compliance for individual WWTP plant
• Assist in maintaining proper maintenance and safety integrity of plant. Ensuring all equipment is in working condition with minimum downtime and regular servicing is carried out
• Ensure all designated equipment calibrations and inspections are up to date
• Work closely with PSM team and lab department on waste flow and waste treatment method
• Assist in promoting WSH activities to operator(s)
• Assist in optimization of operation treatment, manpower allocation as well as continuous improvement on WWTP operation
• Ensure the treated wastewater compliance with sewer discharge limit
• Adhere to all safety requirements within the plant, such as safe work practices, SOP

Requirements:

• Bachelor Degree in Chemistry Engineering
• Min 2 years of experience related to water treatment plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Manage & attend to specific customers to achieve company sales budget
• Account management for assigned customers
• To support and meet the department objectives and business goals
• Attend to all customer enquiries
• Provide sales forecast to plant for raw materials and production capacity planning
• Work closely with oversea representative for new customers development activities
• Assist in implementing and execute plan in developing new customers
• Provide short- and long-term plan on market demand
• Survey and analyses market information for management

Requirements:

• Degree in any Engineering discipline with 2 years of experience in similar industry
• Outgoing personality and ability to work independently
• Good knowledge of general market information
• Good marketing strategy and analysis
• Strong negotiation, interpersonal and problem-solving skills
• No experience requires if able to meet the above requirement may apply

5 days work week

Electronics Manufacturing Co.

Loyang Area (Designated pick-up point)

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Key Responsibilities:

• Digital control system analysis and design in switching mode power supply.
• Developing high power control (DSP) firmware to drive PFC, DC-DC conversion, and various topologies.
• Experience in C and Assembly language programming.
• Good experience in embedded operating system development environments.
• ARM/ TI/ Microchip MCU architecture familiarity will be a plus.
• Communication interface skills: I2C PMBus, UART, CAN, USB, etc.
• Matlab tool usage and experience in digital control experience: Control theory, controller design, and simulation.
• Knowledge of switching power supply is a plus

Key Requirements:

• Degree/ Master/ Ph. D in Electronic & Electrical or Computer Science.
• 2 - 8 years of relevant experience in the power management industry will be advantageous.
• Experience in control topology and transformer design study will be a
  plus.
• Knowledge of digital design, electronics, and control system analysis.

Interested candidates, who wish to apply for the advertised position, please email us an updated copy of your resume.

We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

RESPONSIBILITIES:

• To advise management on relevant Acts & Legislation pertaining to environmental and health
• Monitor to air, water (ECM) noise pollution, waste management and vector control issues
• Liaise with license pest operator or agent
• To monitor noise readings and advise management accordingly
• To conduct regular site inspection, particularly on ECM, perimeter drainage system, silt facilities, poor housekeeping that will encourage pest breeding, workers living and cooking condition, sanitary facilities etc.
• Together with health supervisor to discuss findings & recommend measures to the occupier to correct non-compliances and verification of action taken
• Prepare fortnightly report to management on Environmental control
• To act according to what is stipulated in the company’s environmental programme, conduct review and make recommendation for improvements
• Conduct investigation on industrial diseases, pest infested area and implement measure to stop its spread & prevent recurrence
• To liaise with relevant authorities on environmental & health issues
• Implementation of departmental procedures to comply with ISO 9001; 14001; OHSAS 18001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Any other related duties assigned by superior from time to time

Requirement:

• Must be registered with NEA

This role is 1 Year direct contract with the client located in East.

The AI Engineer will be responsible for developing, deploying, and maintaining AI models tailored to the organization’s needs. This role involves ensuring the successful implementation of AI tools, including custom GPT models, and integrating them into the organization’s workflows. The AI Engineer will work closely with data analysts, IT, and department heads to ensure that AI solutions enhance efficiency and achieve business objectives.

Key Responsibilities:

• Model Development: Design, build, and deploy custom AI models (e.g., GPT-based tools) to meet a variety of organizational needs, such as automating meeting minutes, customer support, and internal knowledge management.
• System Integration: Integrate AI tools into existing enterprise systems, communication platforms, and databases. Develop APIs or leverage third-party tools to ensure seamless incorporation of AI models into workflows.
• Data Handling: Collect and prepare training data for AI models while ensuring compliance with data privacy and organizational policies. Implement secure data retention and processing standards, particularly when handling sensitive company information.
• Model Fine-Tuning and Maintenance: Continuously refine and optimize models based on user feedback, performance analysis, and changing business requirements. Regularly update models to align with new trends, data, and organizational goals.
• Collaboration: Partner with cross-functional teams (HR, IT, Operations) to identify AI opportunities and provide scalable solutions. Work with external AI vendors when needed to implement advanced AI technologies.
• AI Training and Support: Train employees on how to use AI tools and address common issues. Develop documentation and best practices for using AI models within the organization.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Artificial Intelligence, or a related field.
• Minimum of 3 years of experience in AI development, specifically in natural language processing (NLP) and machine learning models.
• Proficiency in AI and ML libraries (e.g., TensorFlow, PyTorch), OpenAI API, and NLP tools.
• Familiarity with enterprise systems, APIs, and system integration methods.
• Strong programming skills (Python, Java) and knowledge of data handling and security best practices.
• Excellent analytical and problem-solving skills, with the ability to translate business requirements into effective AI solutions.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Marine Service Engineer

Office location : 8 Boon Lay Way, #03-03/04, Tradehub21
Working Location: On board ship

Working days: 5 days (Mon- Friday)

Working hours : 8am - 5pm

Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  
  Requirements:
• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

• Responsible for corrective and preventive maintenance of plant machinery and monitoring of critical spare parts.
• Carry out corrective maintenance on plant machines.
• Support on preventive maintenance and machine repair.
• Attend to machines installation, modification, safety items, laboratory equipment, etc.
• Identify and carry out improvement items for machines.
• Liaise with machine agents for repair or maintenance of machines.

Requirements:

• Degree in Electrical/Electronic or Mechanical Engineering
• Prefer 2-3 year(s) of experience in maintenance/repair of machine in a manufacturing environment.
• Good trouble shooting, presentation and analytical skills.
• Good knowledge of PLC programming skills.
• Self-disciplined, independent and able to work under pressure.
• Able to communicate with all levels of staff.
• Able to commit to 12 hours shift work.

Manufacturing Industry

Loyang Area

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No : 06C3745

Audris Teo/ EA Personnel No: R1102063

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for Deep Hole Drilling
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Role & Responsibility

• Prepared detailed plans for Project Execution, Testing and Commissioning.
• Execute Commissioning Procedures as per the project documentation.
• Prepare a checklist for on site inspection to track issue status.
• Provide technical troubleshooting and creative solutions for installation challenges including LED display color calibrations.
• Conduct site acceptance test with end users for Project Final Handover.
• Responsible for writing commissioning reports and contributing to writing procedures, O&M manual, handover documents etc.
• Provide field service support when necessary.
• Understand system integration diagrams including media player, video processor for content display, control system etc.
• Review and revise shop drawing and construction drawing.
• Conduct LED installations and commissioning training.
• Support the installation of products and solutions.
• Plan and manager field service activities.

Requirements

• Minimum of 5 years' experience in the LED installation, testing and commissioning and LED color calibration.
• Ability to conduct field training for LED installations and system operations.
• Proficiency using Microsoft , AutoCAD and equivalent software.
• Ability to maintain effective working relationships with supervisor and other departments.
• Strong Analytical skills

Preferred background

• installation and commissioning experience in LED display industry.
• Work experience in LED display company.
• System application designer and capable of AutoCAD drawings

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

• New Product process design and line setup.
• Understand SAP concept and align process design
• Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members.
• Draft the implementation schedule to meet target date, disseminate and finetune the scheduled with production PICs for the implementation to be carried out smoothly.
• Follow up with related members and enforce the usage of systems developed for operation change tracking.
• Understand key functions and product master setting rules of ERP (SAP) system, process-related inline systems, traceability requirements, to align the process design with the systems.

Requirements:

• Diploma/Degree in Engineering Electrical & Electronics.
• Prefer 2 year(s) of working experience in the related field in the PCB manufacturing environment.
• Good statistical and analytical skills.
• Good communication, planning and coordination skills.
• Entry level are welcome as training will be provided.
• Travelling to Batam Factory and staying for project (min. 2weeks to max 2 months stay per visit depending on project requirements.

Electronics Manufacturing Industry

East Area/Bedok Area

5 days work week

Interested candidates, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

• Capable of traveling within the ASEAN region and responsible for effectively implementing sales strategies and plans to meet individual and team goals.
• Develop and enhance assigned accounts to boost overall sales and profitability, ensuring a healthy sales pipeline and creating new opportunities.
• Achieve sales targets, profit goals, and strategic objectives for the designated regions.
• Provide strategic direction, vision, and action plans to enhance customer loyalty and sales within ASEAN for Products & Solutions.
• Actively participate in and contribute to the Country Growth Plan for ASEAN and Oceania.
• Seek to acquire new customers in ASEAN and Oceania.
• Expand our system integrator and distribution network within the ASEAN market.
• Conduct monthly reviews with distributors to identify early project opportunities in ASEAN.
• Monitor debts and manage collections.
• Engage in active sales visits with distributors, consultants, system integrators, panel builders, and end users.
• Conduct market research and gather feedback on:Market information
  Competitors and pricing
  Customer behavior
  Market values
  

For interested applicants, kindly send your resume in Word/PDF format

Kindly include the following in your resume.

• Current Salary
• Expected Salary
• Availability
• Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (23S1595/R23116355)

About ST Engineering

ST Engineeringis a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Geo-Insights

ST Engineering Geo-Insights Pte Ltd is a data analytics company focused on generating insights from geospatial data for maritime, agriculture and sustainability applications. We are looking for team members who are passionate about implementing technological solutions to solve real world problems and delivering social, economic and environmental value. You can look forward to a growth-oriented career in a supportive and fast-paced environment.

Together, We Can Make A Significant Impact

We are looking to add a dedicated and talented Data Analytics Engineer to our team. You will work closely with other engineers, designers, and project managers to deliver high-quality Geospatial Analytics solutions that meet our clients' needs.

Be Part of Our Success

• Use big data tools and platforms to create and maintain data pipelines, making sure pipelines are robust, scalable, and reliable. Troubleshoot and rectify issues with data pipelines as necessary.
• Design and manage geodatabases, feature classes, and datasets, ensuring data integrity and efficiency.
• Collaborate with cross-functional teams to understand data requirements and develop data processing workflows accordingly.
• Stay updated on emerging trends and best practices in data management.
• Publish map services, feature services, and geoprocessing services, configuring security and performance settings.
• Support technical innovation within the team by providing coding assistance and creative solutions to meet project goals.
• Design and implement advanced analytics solutions that handle high-volume streaming and batch datasets efficiently.

Qualities We Value

• Proficient in data pipeline tools, such as Airflow, Kafka, MLFlow.
• Proficiency in machine learning and deep learning technologies is a plus.
• Knowledge of Flask, NodeJS or other app frameworks, and containerisation, for quick proto-typing.
• Applicants should be motivated, proactive, able to work independently and result oriented.
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Ang Mo Kio

Senior Network Engineer / Senior Network Consultant

Our Esteemed and Reputable Client is looking for a Senior Network Engineer / Senior Network Consultant.

Requirements:

• Proficient in handling Network Infrastructure.

• Good in Network LAN, WAN administration and configuration.

• Proficient in LAN/WAN Systems, Routers, Switches, Firewalls, Servers, Storage, Backup, Operating Systems and applications.

• Experience in Enterprise Network Management.

• Experience in System and Network configuration and troubleshooting.

• Good in System,Windows, Server Configuration and Administration.

• Possess CISCO Certifications.

• Strong in liaising with Stakeholders, Clients and Business Users.

• Min. 5 years of Network management experience.

• Min. Diploma/ Degree in any related discipline.

• Strong communication and persuasion skills

*** Junior roles are available for candidates with less than 6 years of Network experience.

We respect your privacy and all communication will be treated with confidentiality.

Applicants who are not shortlisted may be considered for other similar positions.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities:

• Oversee distribution management for direct users and distributors.
• Drive revenue growth in the assigned territories.
• Achieve sales targets and develop plans to implement strategic business objectives aligned with the group's vision and mission.
• Proactively create new applications and communicate them to distributors.
• Collaborate with the Regional Team to provide monthly and quarterly updates on sales forecasts, budgets, sales generation, business development, and related reports.
• Utilize Salesforce as a forecasting tool to ensure accurate and well-maintained records of prospects and clients, while building a strong pipeline of opportunities.
• Support, quote, and negotiate prices, credit terms, contract agreements, and other specifications as needed.

Requirements:

• With 3 years of experience in industrial product selling.
• Exceptional customer service and presentation skills.
• Positive, dynamic and results-oriented

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R23117856

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.