Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Objectives of the position:

• The NPI / Production Process Engineer is required to collaborate with the Program Management Team

• and be involved in New Product Introduction activities and the creation of manufacturing Work

• Instructions as well as other process documents. The incumbent is also expected to improve the work

• processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

• Early involvement in NPI (New Product Introduction) activities.

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing

• process elements.

• Create Bill of Materials structure.

• Create manufacturing Work Instructions and other process documents in collaboration with the

• Program Management, Production and Quality Assurance Teams.

• Carry out time studies and update the process cycle times.

• Provide timely technical support to the Production Team pertaining to manufacturing process and

• quality issues.

• Engage in DFM and Lean Line Design activities.

• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

• Actively and continuously improve the work processes to improve work efficiency and quality.

• Work with Program Management, Production, and Quality Assurance Teams to identify potential

• process risks and make recommendations to mitigate these risks.

• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

• Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

• Manufacturing/Production or industrial Engineering

• Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

• harness. Candidates with less experience may be considered for the Asst. Engineer position

• Ability to read and interpret technical documents and drawings

• Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

• Experienced in the creation Bill of Materials structures

• Good knowledge on Solid Edge or SolidWorks preferred.

• Proficient with Microsoft Outlook, Excel, Word and PowerPoint

• Lean/Six Sigma certification is desirable

• Strong analytical ability

• Team player with good communication skills

Mon to Fri 8.30am - 5.30pm

We are looking to hire a Senior Process Engineer to work on projects in the Pharmaceutical and Biopharmaceutical sectors.

Key responsibilities:

• Design of process and utilities – preparation of PFDs, P&IDs, equipment sizing calculations
• Coordination of design with other design disciplines and equipment suppliers
• Ownership of equipment modules and packages through design and procurement phases
• Completion of Design Risk Assessments
• Participation in Technical and Safety reviews
• Interfacing with client design team/end users
• Process optimization/site support

Requirements

• Degree in Chemical/Process Engineering (or equivalent)
• At least 8 years of design and project experience in the Pharmaceutical and Biopharmaceutical sectors.

What you can expect

• The opportunity to work on a range of projects, from conceptual stage through to detailed design, commissioning and qualification.
• Career enhancement due to the wide scope of the projects and experience you will receive.
• Work closely with Industry leaders

Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

• Exciting opportunity for someone who thrives in a fast-paced environment
• Join a team dedicated to creating positive environmental and social impact.

About Our Client

This is a well-established company within the energy & natural resources sector, with a strong presence in over 170 countries worldwide. Renowned for its innovative approach, the company consistently stays ahead of industry trends and prioritises sustainability in its operations.

Job Description

• Work closely with current and new customers to understand business needs and recommend continuous improvement and innovation plans that will maintain and grow double-digit sales within the assigned territory.
• Develop strong relationships with key stakeholders in current and new customers, including plant or facility executives.
• Generate and execute sales plans in the assigned customer base and new customer accounts to meet defined territory profit increase goals.
• Provide technical support to customers, identifying and resolving complaints, and escalating as required.
• Engage in problem-solving by performing system analysis, interpreting data, and providing written recommendations to ensure customer operations are performing at optimal levels.
• Provide treatment solutions for the customer's total water management system to achieve water and energy-saving goals, cost optimization, and improve system reliability.
• Identify and execute projects to help customers achieve operational savings, ensure product quality, and reduce manpower engagement.

The Successful Applicant

• Bachelor Degree in Chemical Engineering with over 5 yeas of relevant technical Sales and Service experience
• Effective critical thinking and problem solving skills with ability to work in a refinery/chemical plant
• Customer oriented and always ready to engage with customers

What's on Offer

If you're a dedicated and technical individual with a passion for the energy and natural resources industry, we encourage you to apply for the Process Sales & Service Engineer position.

Contact

Tiffany Wong (Lic No:R22110815 / EA no: 18S9099)

Quote job ref

JN-012025-6634271

Phone number

+65 6416 9801

Michael Page International Pte Ltd | Registration No. 199804751N

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Description

• Industry/ Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 6 years in semiconductor foundry module process,
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Basic Responsibilities:

Ø Conduct research on Atomic Layer Deposition technology for perovskite solar cells

Ø Effectively execute related experimental arrangements.

Ø Participate in maintaining laboratory equipment.

Ø Design, execute, and analyze experiments, and submit reports and analyses as required.

Ø Strong written and verbal communication skills.

Ø Other responsibilities, and job description subject to change at any time.

Education/Experience:

Bachelor's or master's degree in engineering or a similar technical discipline, majoring in materials, chemistry, physics, electronics, or a similar field.

Required Skills/Competencies:

Ø Experience with ALD process is preferred.

Ø Some experience working in a chemical/material/semiconductor laboratory.

Ø Basic understanding of materials science, semiconductor device physics, and chemistry.

Ø Ability to handle complex data, analyze, and communicate results effectively.

Ø Ability to coordinate activities between various engineering and operations teams. Good verbal and written communication skills.

The Project Manager / Process Engineer will assume responsibility for the project management of NPC and its affiliates projects, inclusive of engineering, testing, delivery and the main point of contact for our customers. The Project Manager / Process Engineer is highly organized and can apply learned engineering principles to this role.

Responsible for all phases of a customer's project, including:

• Support for budget/quotation phase
• Contract review of orders received against quotations
• Delivery of all project relevant documents (i.e. P&IDs, GAs, Electrical and Software, Commissioning and Qualification, etc)
• Presentation of technical solutions to customer
• Timely project communication internally as well as with customers
• Pre-FAT, FAT and SAT activities
• Documentation for turn over packages (TOP)
• Final customer acceptance
• Responsible for achieving key performance indicators (Within Specification, On-Time, and Within Budget)
• Establish and manage project schedule, budgeting and milestones
• Coordinate and utilize resources
• Manage and submit project documentation and stakeholder presentations.
• Apply risk management principles to identify, mitigate, or present options for resolution to issues that impact quality, delivery or budget of the project.
• Prepare and present progress and budget reports to project management managers, and project team (internal)
• Ensure designs will meet customer specifications
• Ensure all project documentation is complete and accurate for project close out
• Troubleshooting technical issues.
• Commissioning test execution and management.

Requirements:

• Education: Bachelor’s degree in engineering, management, or related field; graduate degrees in business preferred.
• Previous experience in engineering or project management within the life sciences area, performing equipment testing are (FAT, SAT, commissioning and qualification) preferred.
• Proficient computer skills, Microsoft Office Suite; working knowledge of project management software (MS Project, Primavera,etc)
• At least 3 years of industrial experience (biotechnology and pharma) in an engineering role.
• Bilingual in English and Mandarin Chinese to communicate to Taiwan counterpart
• Willing to be posted to Taiwan.

Contract Period: 12 months, subject to renewal based on performance.

• You are responsible to drive and manage the silicon Bump & package assembly suppliers, backend processes and solutions to achieve the aggressive TQRDCEB goals.
• You will work closely with package design & technology, test & product engg, production planning, quality engg & NPI teams, assembly/substrate suppliers to support new product & technology introduction activities by defining processes, monitoring systems, manage process improvements and changes.
• Provide day-to-day support to bump and assembly suppliers & internal planning, product and test engineering teams.
• Plan, drive & implement improvement activities for continual improvement, 2nd sourcing, cost reduction & customer satisfaction.

Qualifications:

• PhD / Master / Degree in Mechanical / Electrical / Electronics Engineering with 7~12 years of relevant experience of managing advanced node silicon bumping, large body single & multi-chip (2.1/2.5/3D) package assembly, substrate & back-end suppliers and processes.
• Hands on experience in Product Life-Cycle Management - creating & maintaining Bill of Material structure, Process Documentation, Process Change Notification etc.
• Good team player, result oriented individual, experienced in project management, failure analysis tools, techniques and TQM. Good analytical, problem-solving skills. Flexible and agile.
• Sound knowledge of applicable industry standards, quality systems, regulations, knowledge of prevailing and emerging silicon package & substrate technologies, bumping and assembly processes, materials and equipment.
• Able to communicate with internal team members & external partners in various geographic locations and may required to travel from time to time at short notice.
• Experienced AutoCAD user. Knowledge of silicon & PCB fabrication, board assembly processes, are an added advantage

Job Responsibilities:

• Conduct Process engineering and design, including process configuration and optimization studies
• Perform Process simulations, prepare Process/Utility Flow Diagrams, Heat and Material Balance, and Utility Balances
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Create Process design philosophies and operating guides
• Collaborate on Concept Studies, Front- End Engineering Design (FEED) and detailed design projects

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 12 years of relevant engineering design experience
• Good experience with Offshore FPSO, Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage
• Leadership experience in managing process teams for Hydrocarbon projects
• In-depth understanding of process design, heat and material balance, and P&IDs
• Preference will be given to candidates with Lead / Area Lead Engineer experience
• Familiarity with international codes and standards, software and tools

Job Responsibilities:

• Lead Process Engineering and design, process configuration and optimization studies
• Perform Process simulations, prepare Process/Utility Flow Diagrams, Heat and Material Balance, Utility Balance
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Prepare Process design philosophies and operating guides

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 20 years of relevant engineering design experience
• Have worked on Concept studies, FEED and detailed design projects
• Good experience with Offshore Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage.
• Have led process teams on Hydrocarbon projects
• In-depth understanding of process design, heat and material balance and P&IDs
• Familiarity with international codes and standards, software and tools
• Candidates with Lead Engineer experience will be given preference

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Mon to Fri 8.30am - 5.30pm

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 2 years hands-on experience in leading edge film deposition/CVD deposition/implant technology work.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Purpose:

To contribute as part of a process safety team on a proposal / project, in collaboration with different departments and process safety section, to manage Major Accident Hazards (MAHs) and prevent and mitigate Major Accident Events (MAEs) throughout the lifecycle of the facility.

Responsibilities:

• Develop / Support the development and review of HSSE Design Philosophy, and other process safety-related philosophies. Provide guidance to the proposal / project for compliance to company standards, client and regulatory requirements of safetyrelated systems.
• Develop / Support the development of scope of work, perform safety consultant technical bid evaluation, participate in workshops, plan, review and deliver safety studies / deliverables. Deliver complete, correct, and on-time safety studies and deliverables to the proposal / project, demonstrating risks are As Low As Reasonably Practicable (ALARP).
• Organise Bow-Ties workshops, define SCEs, communicate performance standards requirements, review SCE design, manage tracking and review of EPCI assurance tasks, as instructed by the Principal Engineer, to ensure that safety critical elements are designed, procured, constructed, commissioned, and installed in accordance with performance standards for the prevention and mitigation of MAEs.
• Coordinate and manage risk consultant/subcontractor to ensure the risk of the facility is properly assessed in accordance with the scope of work and methodology, in a timely manner and on budget.
• Collect risk assessment input data, review risk assessments, prepare deliverables, review other discipline deliverables, and collaborate with other disciplines and departments, as instructed by the Principal Engineer or assigned engineer. Issue accurate deliverables, minimizing mistakes and maximizing efficiency. Minimise / manage deviations from company standards, client and regulatory requirements of safety-related systems.
• Contribute to the achievement of Project / Engineering Performance Goals defined for the year / project.
• Collaborate with the proposal / project team, consistently check deliverables for compliance, attend / support audits and resolve non-conformities to deliver a regulatory compliant installation. Minimise non-conformities and delays to first oil.
• Communicate professionally with the client, provide responses to client comments, as instructed by the Principal Engineer, such that the client is satisfied that hazards are managed appropriately.
• Collaborate with the project team to ensure that changes are managed in accordance with the Management of Change Procedure and their impact on risk are properly evaluated.
• Identify and communicate lessons learnt for improved management of MAHs and project execution.
• Ensure technical competencies are met and guide the development of process safety engineers to improve technical competency and soft skills.
• Comply with COMPANY Group Policy, Code of Business Conduct and Ethics at all times.

Requirements:

Minimum 7 years of relevant working experience in Process Safety engineering in the oil and gas sector for a bachelor’s degree in Chemical / Environmental / Mechanical Engineering, or minimum 6 years of relevant working experience for a master’s degree, or minimum 12 years of relevant working experience for a diploma holder.

R1552011

Peak Ocean EA License No. 18C9336

Job Description

• Industry/ Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Responsibilities:

• Prepare and execute all assigned validation and re-validation protocols, as well as engineering study protocols.
• Monitor and manage the validation and re-validation status of machines and systems.
• Monitor machine performance to ensure high quality and yield results.
• Improve process performance to maintain product quality and quantity.
• Ensure calibration compliance at all times to adhere to Quality System Regulation (QSR).
• Document and prepare monthly, bi-yearly, and annual calibration of requirements and tools.
• Support engineering team members and other departments with projects, yield improvement, validation activities, troubleshooting and engineering studies.
• Annually qualify and re-certify the sterilizers used in production.

Requirements:

• A degree in any engineering field.
• Minimum of 2 years of experience as a Process Engineer in the medical device manufacturing industry.
• Proficiency in mechanical and/or electrical engineering.
• Strong verbal and written communication skills.

Job description

Roles & ResponsibilitiesAnalytical Laboratory:

• Process control (Eg. Production parameter control)
• Quality control (Eg. Finished goods periodical testing)
• Familiar with the operations/technique of analytical instruments
• R&D of new processes on a lab-scale
• Maintain and control of laboratory analytical and testing records

Process:

• Perform First-Article testing for new customers or parts, prior to mass production
• Perform review/gap analysis on customer’s specifications for chemical processes, with adequate process control measures
• Involve in quality issues investigations, troubleshooting, root cause analysis and corrective action implementation
• Lead investigations for recovery action on any non-conformity
• Control of chemical logistics for entirety of production

Waste-water treatment plant (WTP):

• Manage and maintain WTP at optimum system performance for treatment of chemical waste
• Troubleshoot WTP system issues when waste discharge is non-compliant to Trade Effluent standards
• All other tasks that might be assigned from time to time

The key functions of Process Engineer is to:

• Applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organization objectives
• Analyse and troubleshoots process engineering, manufacturing and /or maintenance issues and recommends engineering solutions, and develops work instructions for out of control processes
• Leads production and manufacturing systems improvement projects, and develops operation plans in accordance with organization objectives and other regulatory requirements.

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Mechanical /Microelectronics / Chemical Process / Chemistry / Physics/ Material Science/Material Engineering
• Min 7 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capabiity to lead and guide junior engineers
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications