• Assist Project Manager on planning to ensure that materials, manpower, machineries, authorities approval and site conditions are ready before the work starts.
• Supervise work for the contract and ensure that it is done in compliance with the contract specification including confirming and verifying that the work is done.
• Manage the project to ensure that work is carried out in a manner that meets the quality, environmental, health and safety objectives and targets set out by the management.
• Coordinating with authorities, clients and vendors.
• Preparation of shop drawings and as-built drawings.
• Candidate must possess at least a Bachelor's Degree in Civil Engineering recognised by Professional Engineers Board (PEB).

As a PDE Central Process Integration Principal Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide synergy

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

JOB QUALIFICATIONS

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

As a PDE Central Process Integration (PI) Senior Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide alignment

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

Requirements

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

Keen on the role? Apply now!

Job Description:

• Oversee post-sales activities Cybersecurity products.
• Participate in large-scale project implementations at both local and regional levels.
• Provide on-site implementation services, including testing, deployment, and documentation.
• Offer technical support to ensure customer satisfaction.
• Analyze and address customer queries by troubleshooting and consulting existing knowledgebase articles and known issues.
• Be available for 24x7 maintenance support calls on a routine standby basis.
• Any other ad hoc duties as assigned by supervisor.

Requirements:

• Candidates with no prior relevant experience are also encouraged to apply
• Bachelor’s Degree or Diploma in Cyber Security, Computer Science, Computer Engineering, or a related field.
• 1-3 years of relevant experience in IT, particularly in network support and administration.
• Knowledge and experience in networking, including routing and switching technologies.
• Capable of working independently as well as part of a team.
• Willing to work diligently and eager to learn about new technologies.
• Strong analytical and troubleshooting abilities.

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Etch tools / equipment (AMAT / Mattson)
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

JOB SUMMARY

Snr Manufacturing Engineer (Medical) will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Engineer will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Strong Knowledge in Healthcare business with ISO 13485 & FDA regulatory would be added advantage.

• Knowledge of assembly drawings, as well as the ability to interpret part drawings and specifications, is essential.

• Report writing, perform DFM and able to communicate within internal and external stakeholders. Able to perform Assembly process for High Level Assembly (HLA). Create procedures for processes and train staffs accordingly.

• Strong understanding on PFMEA, Process Flow, Control Plan and Process risk Assessments.

• Communicate frequently with operations, technical, and quality representatives within area of support through the tier process.

• Provide leadership and commitment in supporting continuous improvements in quality, productivity, and delivery performance through the deployment of continuous improvement framework.

• Reviews all inputs from the Engineering Department, including ECOs, new product releases, configuration control policies, and marking requirements, while also participating in the Design for Manufacturability (DFM) process.

• Solid understanding on BOM, ECN process, PCN and shop floor management will good plus.

• Monitor and continuously enhance daily quality and efficiency performance in assigned areas. Familiarity with Lean tools, such as Cycle Time, TAKT Time, and LBR, is crucial for assessing waste reduction and overall improvement.

• Participate in new product development by collaborating with R&D, New Product Development, and Quality teams to offer Design for Manufacturability guidance on hardware. A solid understanding of mechanical design is essential.

• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply with all procedures within the company security policy.

REQUIREMENTS:

Candidate must possess at least a Diploma, Degree, Engineering (Mechatronic/Mechanical) or equivalent. At least 5 year(s) of working experience in the related field is required for this position.

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Photo / Track equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Location: Bugis (Hybrid)
Salary Range: $7,000 – $9,000 per month
Employment Type: Permanent
Travel: Frequent international travel (up to 1 month at a time)

Job Summary:

We are seeking an experienced Project Engineer to oversee the installation, operation, and maintenance of critical static equipment in industrial settings, including heat exchangers, high-pressure vessels, furnaces, and related systems. This is an exciting opportunity to join a dynamic team managing complex projects involving highly technical equipment across various industries, such as oil & gas, chemical processing, and power generation.

The ideal candidate will have a strong background in engineering design, project management, and static equipment handling, with the ability to travel internationally as needed to support project execution and ensure safety and performance standards are met.

Key Responsibilities:

• Manage and oversee the full lifecycle of static equipment projects, including heat exchangers, high-pressure vessels, and furnaces.
• Collaborate with internal teams and external stakeholders to ensure successful project execution and timely delivery.
• Provide technical expertise in the design, installation, commissioning, and maintenance of static equipment.
• Ensure all equipment complies with relevant safety, regulatory, and quality standards.
• Prepare and review project documentation, including technical drawings, specifications, and reports.
• Conduct site inspections and supervise contractors to ensure compliance with safety regulations and project specifications.
• Troubleshoot and resolve technical issues related to equipment, ensuring optimal performance and reliability.
• Coordinate with vendors, suppliers, and subcontractors to ensure equipment and materials are available for timely project execution.
• Regularly report on project progress, budgets, and timelines to senior management.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Chemical Engineering, or a related field.
• Experience: Minimum of 3-5 years of engineering experience working with static equipment (e.g., heat exchangers, high-pressure vessels, furnaces) in industrial settings.
• Project Management: Proven experience managing projects involving complex equipment, from initial design to installation and maintenance.
• Technical Skills: Strong understanding of engineering principles related to heat transfer, pressure systems, and high-temperature equipment.
• Travel: Willingness to travel internationally for extended periods (up to 1 month) as required by the project needs.
• Certifications: Professional certifications in Project Management (e.g., PMP) or relevant industry certifications are a plus.

Key Competencies:

• Analytical Thinking: Ability to assess and solve complex technical challenges quickly and effectively.
• Attention to Detail: Meticulous in reviewing design documents, equipment performance, and safety protocols.
• Collaboration: Able to work well with cross-functional teams, contractors, and clients to ensure project success.
• Problem Solving: Strong troubleshooting skills, especially in dealing with high-pressure or high-temperature equipment.
• Adaptability: Comfortable working in dynamic environments and adjusting to changing project requirements.

Benefits:

• Competitive salary and benefits package.
• Opportunities for career growth and development.
• Hybrid work model, with flexibility to work from home and the office.
• International travel opportunities for project execution and client support.

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. More than 4-year industrial work experience is preferred

Responsibilities:

• Support the internal engineers on the development of Semiconductor front-end process.
• Develop new or modified process formulations, defines processing or handling equipment specifications, and reviews processing techniques applied in manufacturing.
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods.
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications.
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems.

Requirements:

• Degree in Chemical/Materials Science Engineering is a must.
• Minimum 2 years of relevant experience in the development of Semiconductor front-end process.
• Experience in Project Management will be an added advantage.
• Strong communication and good interpersonal skills.
• A meticulous, organized and resourceful team player.
• Able to work in cleanroom environment.

GMP Technologies (S) Pte Ltd (EA Licence: 11C3793) | EA Personnel: Novita Widjaja (Reg No.: R22105960)

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Summary

You will be working with our client who specialises in the healthcare space. You will be responsible in providing technical support for application related issues, performing daily service health monitoring, server maintenance and resiliency improvements. You will also be responsible for delivering new and improved capabilities in systems monitoring, recovery and stability aspects of the system.

Responsibilities

• Support and assist in regular server maintainance, system accesses, systems monitoring, backups, patching and daily health checks
• Maintain service operations documentation and guides. Develop supporting documentation for all service operations activities
• Monitor service level dashboards, perform daily health monitoring, system capacity review and allocation of adequate capacity
• Defect fixes and resiliency related improvements
• Assist in investigation of user reported issues
• Develop mitigating and/or preventive solutions
• Support transition phases from project to operations.
• Assist team in Change Approval Board and Pre-commissioning preparations.
• Liaise closely with interfacing systems users and support teams on routine support issues or enhancements.
• Provide application maintenance support (certain activities may occur after office hours).
• Liaise closely with business users and build good rapport.
• Support vulnerability assessment, capacity management and software lifecycle to ensure timely remediation of identified issues.
• Coordinate production deployment process and administrative account access.

Requirements

• Bachelor’s degree in Computer Science or other highly technical, scientific discipline
• At least 3 years of L2 Technical Support experience on multi technology platforms
• Must have prior knowledge in SAP SuccessFactors, SAP HR, SAP S/4 Hana application with strong analytical and problem-solving skills
• ITIL v3/v4 certification and strong service oriented experience / background preferred
• Strong knowledge and understanding of IT industry environment and business needs
• Proven experience supporting web, mobile and client based applications

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Chew Kai-Xinn at [email protected] for more information.

Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.

Morgan McKinley Talent Solutions

Morgan McKinley Pte Ltd EA Licence No: 11C5502

EAP Registration No: R2196712

EAP Name: Chew Kai-Xinn

Job Description

• Involve in the project or maintenance services related with General Security Systems, Alarms Systems, CCTV Systems , Access control systems and Server & Network infrastructure and whenever required.

• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup

• Troubleshoot problems encountered on site

• Work closely with Project/Maintenance Managers in planning the implementation tasks

• Maintain accurate and consistent set of work instructions service delivery processes.

Job Requirements

• Candidate must possess at least a Professional Certificate/Nitec, Diploma, Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/Information Technology ) or equivalent

• Preferrable with knowledge of networking and IP/TCP protocol

• In-depth knowledge in CCTV, Access Control and System Server etc.

• Hands-on experience in security-related tasks such as OS tightening, patching and updating, virus scanning will be an added advantage.

• IT Certification in windows system & storage, network, database, virtualization, cloud technologies will be an added advantage

• Good communication skills and positive working attitude.

• Candidate must possess a Class 3 driving license

• Candidate must be able to work on weekends and perform standby duties.

Interested applicants can email to [email protected]

EA Personnel Name: Dominic Goh
EA Personnel No: R1103353
EA License No: 14C7135

Salary: up to $4500

Working Days & Hours: 12 hour shifts (2-2-3)

Location: Tuas (islandwide pickup)

Job Description:

• Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.
• Support the STS in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.
• Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready
• Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.
• Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)
• Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.
• Participate in all investigation, report and troubleshoot findings on both EHS and quality related issues observed during manufacturing or during batch record review.
• Participate in Continuous Improvement (CI) activities, contribute ideas and perform Plan, Do, Check, Action (PDCA) cycle
• Support the STS in the development of risk assessment, creation of job safety assessment and participate in HAZOP when required.
• Develop Standard Operating Procedures as part of change control and perform periodic review.
• Assist in all commissioning, qualification and validation activities as necessary.
• Participate as a member of the emergency response team (ERT) when necessary.
• Accountable for:
• Safe operation of plant and equipment
• Safety compliance
• cGMP, GDP and SOP compliance
• Meeting production plan
• Housekeeping of plant area

Job Requirements: Min Degree in Chemical Engineering w min relevant internship experience in pharma manufacturing

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Responsibilities:

* Assist in the installation, calibration, and commissioning of medical equipment.

* Perform routine inspections, preventive maintenance, and repairs on medical equipment.

* Troubleshoot equipment malfunctions and provide timely resolutions.

* Maintain accurate documentation of equipment maintenance and repair activities.

* Adhere to all safety protocols and regulations.

* Any other duties assigned from time to time

Requirements:

* Diploma in Electronic / Electrical / Mechanical Engineering or a related field.

* Prior experience in a similar role is preferred but not mandatory.

* Strong problem-solving and troubleshooting abilities.

* Strong communication and interpersonal skills.

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Sales Engineer

• Salary : SGD4,000 - SGD 5,000 + Commission
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Job requirements

• With relevant experience, preferable with Semiconductor industry
• Cert /Nitec / Diploma in engineering background
• Possess own transportation is an added advantage

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Technical Sales Engineer

• 5 days
• 9am-6pm
• Kallang
• $4000-$6000

The Technical Sales Engineer is responsible for supporting the sales staff in presenting technical presentations of our products as well as assisting on installations of our products in both a pre and post-sales support role

Responsibilities:

• Provide pre- and post-sales technical support to customers
• Technical support of field service engineers and customers when required
• Evaluating and establishing vision system performance specifications
• Manage customer specific projects & documents

Requirements:

• Degree / Diploma in engineering discipline with minimum 1 year experience
• Knowledge in field servicing and semiconductor industry
• Knowledge in Die Sorter or Wafer Sorter will be preferred.
• Ability to troubleshoot electronics hardware system is an added advantage.
• Good Knowledge of PC hardware, OS and networking.
• Proficient in Microsoft application
• Min 1 year related experience. Technical and support to field service engineer and customer

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Electrical Engineer (Marine offshore)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Manages and monitors all installed systems and IT infrastructure to be in line with SOP (standard operating procedure) in place.
• Defines customers’ needs and functionalities.
• Assists in the coordination of system related activities and evaluation of the implementation design.
• Installs, configures, and tests operating systems, application software, and system management tools.
• Providing Level 1 and 2 support
• Responsible for supporting operational systems satisfying contractual Service Level Agreement (SLA)
• Performs and manages routine preventive maintenance and operational activities promptly and effectively (e.g. OS patching)
• Evaluates the existing systems and provides the technical directions.
• Collaborates and manage various stakeholders to ensure high quality deliverables within the guidelines, policies, and procedures.
• Anticipating, troubleshooting and rectifying systems related issues.
• Continual maintenance of security, including backup and redundancy strategies
• Liaising with 3rd party vendors, IT providers, etc. for support where required
• Provide system documentations and reports

Requirements:
• BS/MS degree in Computer Science, Engineering or a related subject
• At least more than 2 years of experience in System administration, including installing, configuring and troubleshooting UNIX /Linux based or windows server environments.
• Experience with virtualization and containerization (e.g., VMware, Hyper-V)
• Experience with network devices (e.g. firewall, switch) and networking knowledge (OSI network layers, TCP/IP)
• Experience with monitoring systems and shell / bash script for task automation is an added advantage.
• Solid experience in the administration and performance tuning of application stacks is an added advantage
• Pro-active, resourceful, willing to learn and able to work independently as well as in a team

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://go.persolkelly.com/job/apply/8136>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

Responsibilities:

• Responsible for Network related incident and change management
• Responsible for the commission, de-commissioning and tech refresh of network devices
• Facilitate in problem solving and collaboration
• Manage the smooth delivery of network operations in accordance with stipulated Service Level Agreements
• Provide firmware updates for network devices
• Ensure network infrastructure complies with security policies
• Prepare and maintain assets to ensure availability and update of capacity reports
• Update process and procedural documents
• Any other ad-hoc duties as required or assigned

Requirements:

• Bachelor Degree or Diploma in Information Technology/Information Systems/Computer Science, Business IT or its equivalent
• At least 5 years of experience in administration and implementation
• Good knowledge of the following, but not limited to:Firewall technologies (high availability, virtual firewall concept)
  IP load balancer
  Distribution and core switches
  LAN and WAN administration
  
• Good understanding of a services business in a high-tech environment from a supplier, integrator or operator’s perspective
• Strong analytical and problem solving skills, combined with ability to provide quick resolution to problems
• Proficient in troubleshooting skills
• Effective communication skills
• Self-driven and ability to work independently

To Apply:

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret that only shortlisted applicants would be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy which is available at https://www.persolkelly.com.sg/policies. You also acknowledge that you have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

• conduct BAU activities, health checks, conduct infrastructure monitoring, handle customer queries, investigate incidents reported, resolve the incidents, apply fixes, and to ensure that incidents reported are tracked and resolved till closure
• provides leadership and accountability to the teams managed
• to train and guide junior team members
• The Network Lead directly supports end users by handling escalations, resolving user issues, and monitoring the performance of business-critical systems to prevent delays and outages and quickly resolve ongoing issues

Technical Requirement:

• Minimum 5 yeras experience in IT Network Infrastructure
• Experienced in network/security administration in enterprise DC and Public Environment
• Experiences in supporting firewall /network product such as Cisco, Palo Alto, Meraki and Check Point
• Experienced in troubleshooting system, middleware and network problems, diagnose and solve hardware/software issues, analysing system logs and identifying potential issues/incident

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://go.persolkelly.com/job/apply/7194>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI