Main Duties & Responsibilities :

1. Performing routine operations

a) Attend toolbox meeting and ensure all the information regarding the status of each operations under his control are properly communicated and documented in patrol log and/or handover log sheets

b) Supporting shift operation activities when in demand (such as shift manpower shortage or extra manning requirement during special operational period).

c) Strictly follow documented procedures (e.g. Standard operating procedure- SOP, EHS regulations, Check sheet, risk assessment) to ensure safe and stable operation in the plant

d) Record all the information in the documented records (eg: Log-sheet or checksheets) as required and be involved in the process trouble-shooting / investigations / abnormality reports

e) Checksheets and workflow sheet must be completely filled up at each step and final completion confirmed by supervisor

f) Provide input and/or prepare draft of revised manufacturing SOP or checksheets

g) Promptly report any near miss / deviations / incidents to his Supervisor, directly or through Risk reporting & improvement proposal system.

h) Keep good housekeeping conditions at all times, return all tools / items to designated place and enforce similar standards to contractors. Ensure tools / items fully accounted during handover / takeover according to quantity and condition specified.

i) Assist his supervisor to collect data and samples to facilitate trouble shooting or improvement effort.

j) Support implementation of new/revised procedure and check compliance to the procedures. Inform his direct supervisor if any abnormality is detected

k) Monitor stores and tools managed by day team to ensure sufficient stores and tools, and in good working condition

l) Provide administrative support to production department members, in purchasing consumable items. Assist operation team in sourcing new operational tools and maintain the inventory of item.

m) Senior day technicians, are required to participate in ASDM activities, including procedure preparation, blind allocation, critical task coordination.

n) Working team in managing Car seal program to ensure processes valves are locked at defined position for safety credit. In parallel, control and manage NO/NC program and reporting status to his superior.

2. Quality control

a) Has responsibility to ensure quality of products under his control, including prevention of foreign material contamination

3. Performing non-regular work

a) When an abnormal condition is detected (outside of normal operating condition), stop operation and inform supervisor immediately

b) Support actual NRW, in parallel to shift operation. Join toolbox meeting, understand and take effective measurement to mitigate and manage the risk during NRW execution. Conduct properly work closure including normalizing the process as per plan and carry out house keeping at workplace.

4. Emergency response

a) Involve in CERT team/organization when appointed as part of CERT (Company Emergency response team)

b) Participate in CERT training, drills and audits defined by EHS department

c) When emergency situation occurs, follow the steps established in the emergency response plan, perform assigned role such as fire warden, first aider or rescuer

5. Committee and training

a) Involve in Production department committee as shift representative, to provide feedback to committee and assist committee to implement action items

b) Train and guide new day technicians during On-job-training

REQUIREMENTS

· Diploma or Nitec in Chemical engineering or equivalent.

· Minimum 2 years work experience in a chemical processing environment. Experience in polymerization and/or extrusion is advantageous.

· Possess basic Knowledge of chemical processing with working knowledge of ISO14001, ISO9001, SS506 part 3

· Proficient in using computing software – MS word, MS Excel

· Able to work on day in a fast paced environment

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

• Assist in organizing and scheduling manpower within the department
• Oversee projects technically, attend yard meetings as needed
• To lead a team of skilled machinists to perform precision on-site machining services on client equipment and machinery
• Set up and operate various In-situ machines for precision work
• Responsible for overseeing and coordinating all activities related to the in-situ crankshaft repairs and maintenance
• Lead and supervise a team of technicians and machinists in performing in-situ crankshaft repairs and maintenance.
• Perform tasks both on-premises and at customer sites, which could be local or international.
• Read and interpret technical drawings and documents to find repair solutions.
• Complete jobs within the shortest possible time frame and coordinate all aspects as directed by the Department Manager
• Regularly update your manager on manpower schedules and project progress. Clear communication ensures that all team members are aligned with project goals and timelines.
• Conduct machine tool preventive maintenance as needed.
• Use all prescribed safety equipment and comply with OSHA rules

Requirements:

· Diploma / Degree in Engineering Or ITE with Vast Experience

· Minimum 8 years working experience in related field and 3 years working experience in a Managerial Position

· Strong persuasion and negotiation skill with a variety of people at all levels

· Ability to manage foreign workers

· Possess good leadership qualities

· Excellent communication and problem solving skills

· Able to handle unexpected challenges

· Strong project management skill. Ability to manage multiple projects, plan against timeline and meet deadline, and forecast, budget and monitor project costs

· Previous working experience in ship building Projects will be an advantage.

. Shipyard, shipbuilding/shiprepair experience is a MUST for this position

. Team player with leadership qualities

. Able to plan, coordinate and monitor ship building and repair actiivites

. Able to work under pressure and tight schedules

. Professionally sound and to be able to trouble shoot mechanical / hydraulic defects at Riding crew at Sea / Anchorage.

. Able to work Extended working hours and week ends too

. MOM relevant certificates required

Responsibilities

• Responsible for the planning, leading and supervision of production team to ensure that works are carried out in a safe, timely and cost-effective manner
• Discussion, advising and coordination of works with all relevant parties
• Preparation of reports as required
• Observe and maintain safety rules and regulations

• Advanced CAD Skills – Proficiency in using advanced computer-aided design (CAD) software to create detailed 3D models and engineering drawings.
• Mechanical Engineering Knowledge – Strong understanding of mechanics, materials science, thermodynamics, and manufacturing processes.
• Problem-Solving – Ability to identify issues in design and find innovative solutions, considering both technical and cost constraints.
• Design for Manufacturability – Knowledge of how to design products that can be easily and cost-effectively manufactured.
• Project Management – Ability to lead and manage projects, including timelines, resources, and cross-functional collaboration.
• Finite Element Analysis – Experience with FEA tools to predict the behavior of mechanical components under various conditions.
• Communication Skills – Ability to clearly communicate technical ideas and collaborate with other teams, including engineers and manufacturers.
• Attention to Detail – A keen eye for detail to ensure designs are accurate and meet all specifications and safety standards.

Job Responsibilities:

• Establish, implement and maintain effective Quality Management System (QMS) in compliance with the requirements established by the Company and relevant industry standards (e.g. API Q1 requirements).
• Establish and lead internal audit program covering all operations and functions to ensure adherence to QMS requirements, provide report on internal audit results, and follow-up audit results to ensure close out of corrective/ preventive actions.
• Lead and drive continuous improvement efforts in QMS.
• Lead root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely response to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Manage and supervise the daily operations of Quality Control.
• Supervision and management of QC resources – Inspectors, Quality Coordinator.
• Provide technical expertise and training to Inspectors and Quality Coordinator.
• Ensure proper control and maintenance of quality documents and records.
• Prepare Quality performance metrics and reports on a weekly and monthly basis.

Job Requirements:

• At least a Professional Certificate/NiTec, Bachelor Degree, Post Graduate Diploma, Professional Degree in Mechanical Engineering, Quality, or related.
• Good knowledge of ISO /API Q1 is preferred.
• Strong hands-on experience on quality inspection & measurement is preferred.
• Knowledge/certificate in NDT is preferred.
• Possess good interpersonal and planning skills.
• Minimum 2 years work experience in Quality Management System of manufacturing environment.
• Prefer having experiences in non-electronic industries such as raw material suppliers, metal cutting, oil & gas, mechanical , surface treatment/coating etc.

- Responsible for achieving sales targets and providing technical support to our customers

- Diploma or ITC / NTC2 in Mechanical / Electrical or Marine Engineering

- Entry-Level graduates may apply

- Sales and product training will be provided

- Excellent interpersonal, communication & negotiation skills

- Must possess Class 3 licence and own a car

1. JOB SUMMARY

The SAAC Engineer handles security operations, oversees officers, ensures systems, and supports compliance under EHSS leadership.

1. KEY RESPONSIBILITIES

Security Operations:

- Develop and implement security protocols to ensure the safety of personnel, assets, and property.
- Oversee and coordinate the deployment and performance of security officers provided by external security agencies.
- Monitor and address security incidents, ensuring timely and effective resolution.
- Conduct risk assessments, threat & vulnerability assessments, gap analysis, and site audits to evaluate and improve security measures.
- Draft, implement, and enforce Standard Operating Procedures (SOPs) for security operations.

Security Infrastructure and Systems:

- Design, install, and maintain physical security systems, including CCTV, access control, and alarm systems.
- Identify and rectify deficiencies in existing security infrastructure to maintain functionality and compliance.
- Plan and execute upgrades or modifications to security systems and infrastructure.
- Evaluate advancements in physical security technology and recommend improvements.

Documentation and Compliance:

- Prepare and maintain all security-related documentation, such as incident reports, risk assessments, and compliance records.
- Ensure that all security operations and infrastructure comply with local laws, regulations, and corporate policies.
- Provide detailed reports and updates to the Head of EHSS regarding security operations and incidents.
- Maintain accurate records of inspections, maintenance activities, and system updates.

RBA and SAAC Responsibilities:

- Ensure compliance with anti-corruption policies and RBA Code of Conduct requirements within security operations and the broader supply chain.
- Manage documentation and preparation for RBA audits, including supplier contracts, training records, incident reports, and corrective action plans.
- Conduct risk assessments and implement corrective actions to address non-compliance findings.
- Support anti-corruption training and awareness programs for internal teams, suppliers, and vendors.
- Monitor and report progress on RBA-related compliance activities to the Head of EHSS.

Stakeholder Coordination:

- Work closely with internal stakeholders to address security concerns and implement solutions.
- Liaise with external security agencies, suppliers, and vendors to ensure their compliance with security and anti-corruption requirements.
- Serve as the point of contact for regulatory authorities and auditors during compliance inspections and RBA audits.

1. MINIMUM ACADEMIC REQUIREMENT

- Bachelor’s degree or Diploma in Security Management, Engineering, EHS, or a related field (or equivalent experience).

- Minimally graded as SS by PLRD
- Significant experience in physical security operations, infrastructure management, and stakeholder coordination.
- Expertise in physical security systems, such as CCTV, access control, and intrusion detection systems.
- A background in Environmental, Health, and Safety (EHS) is strongly preferred.
- Proficiency in preparing and managing security documentation, including compliance reports.
- Familiarity with RBA standards, corporate security, and anti-corruption practices.
- Certifications in relevant security or EHS fields (e.g., CPP, PSP, NEBOSH, WSQ Advanced Certificate in WSH) are an advantage.

- Fresh graduates are encouraged to apply

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development servicesProviding customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and productsThrough intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutionsComprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Collaborate with multiple project teams of software R&D, quality engineers, and partners to deliver quality upfront, end-to-end quality validation in the Cloud and App solution releases for printers that are an embedded SW device.
• Manages and influences the software solution development process and schedule confidence through early engagement to embed quality requirements.
• Defines Validation Technical Strategy and delivery (Specify test plan - test selection, test setup, test sequencing & priority, pass/fail criteria (expected test outcome/specifications), conducts validation requirements Analysis.
• Ensure that the validation scope and methodologies are defined, optimized, set up, and executed to the quality delivery plan.
• Provides domain-specific expertise to the team members and partners to drive for issue root cause analysis and resolution.
• Collaborates and communicates with management, internal, and outsourced development partners regarding test status, project progress, and issue resolution, mitigation plans for development, and released printer solutions

• Bachelor's or Master's degree in Computer Science, Software Engineering, or equivalent.
• Minimum 3 years of experience with Printing, Firmware, Apps & Cloud based solutions (development/ customer focussed testing).
• Experience with Agile software development models, overall architecture, and software design for products and solutions will be considered as an added advantage.
• Knowledge of software end-to-end validation will be an added advantage.
• Excellent analytical and problem-solving skills.
• Ability to influence business decisions & partners.
• Has good communication skills. Be able to present to sponsors and management on proposals, negotiate options, and drive for alignment.
• Experience in cross-functional leadership.
• Critical thinking and conflict management skills.

Job Description

1. Design & Development for Special/New Product

2. Claim Handling -Investigate and response to customer claim

3. Conduct Functional & Life Testing

4. Involve in Production rationalization & SDG projects

5. Global Supplier Expansion – Evaluation and qualification of supplier, parts, process

6. Install & Commissioning of production facilities

7. Improvement Project Work:

• Study, propose, and implement projects.
• Rationalize processes and facilities for improve efficiency, quality, cost, and safety.
• Set up new processes or facilities.
• Design and build facilities.

Job Requirements

1. Technical Skills:

· Passion for mechanical automation technology.

· Strong technical inclination, including understanding system design and working principles.

· Hands-on approach – willing to engage in practical work, not just desk-based tasks.

· Minimum 2 years of experience in a related engineering field.

· Preferably possesses knowledge in CAD, PLC, Machine Vision, and Robotics.

2. Personality Traits:

· Committed and self-initiative, with a proactive approach to problem-solving.

· Creative problem solver, thinking innovatively to address challenges.

· Curious with a thirst for knowledge, willing to refer to manuals and undertake self-study.

· Logical thinker with a hands-on mentality, implementing improvements and troubleshooting effectively.

· Sense of responsibility and urgency in addressing issues independently.

3. Communication Skills:

· Cooperative and able to work effectively in a team.

· Proficient in technical report writing.

· Strong communication skills to convey ideas and solutions effectively.

· Able to communicate in Japanese will be an added advantage

Summary

Identify, develop and drive strategic engineering initiatives particularly in relation to Quality, Cost, Productivity improvement. Lead NPI and Product Transfer Projects to successful completion.

Key acountabilities

• Responsible for site Engineering activities, identify and propose opportunities including Out/In-sourcing ideas, EOL management, alternate sourcing and others
• Lead NPI and Product Transfer projects to successful completion
• Initiate value engineering projects to enhance operational capabilities to meet new business needs and raise operational efficiency
• Lead material localization projects for improvements in product cost, quality and operational excellence
• Work closely with cross functional teams to understand engineering related issues in order to provide effective solutions
• Drive yield improvement, reduce COPQ and drive shopfloor productivity through automation and process enhancement
• Improve site Safety through hazard identification and prevention

Requirements

• Bachelor’s Degree in Engineering / Science disciplines
• At least 8 - 10 years of relevant experience in manufacturing engineering in Analytical instruments industry
• Experience in NPI and product transfers is preferred
• Knowledge in manufacturing process of analytical instruments such as Inductively Coupled Plasma- Optical Emission Spectroscopy (ICP-OES), Inductively Coupled Plasma- Mass Spectrometry (ICP-MS), Gas Chromatography (GC), Atomic Absorption Spectroscopy (AAS)
• Good oral and written communications
• Strong analytical and interpersonal skills
• Project Management experience and leadership skills
• Strong drive for results, balanced with effective decision making and problem-solving skills
• Lean manufacturing and Six Sigma Methodology
• Knowledge in ISO 9001, ISO14001 and ISO45001

JD FOR SALES ENGINEER

We are seeking a dynamic and motivated Sales Engineer to join our team.

Job Description

Technical Sales Support: Present product features and benefits, offer technical assistance, and address customer queries. Understand client needs, able to recommend appropriate products. Relationship Management: Cultivate long-term client relationships, provide ongoing support, and collect feedback to improve products. Market Knowledge: Stay up-to-date on industry trends and competitor activities, while training the sales team on technical product details. Sales Growth: Help achieve sales targets, identify opportunities for upselling, and represent the company at events and trade shows. Documentation: Maintain accurate client records and provide reports on sales performance and market trends.

Benefits:
• AWS
• Bonus
• Transport Allowance
• Entitled to commission

Responsibilities:
• To meet assigned Sales Targets
• To manage existing customer accounts and seek new leads
• Establish a good business relationship with customers long term

Requirements:
• Possess own car
• Candidate must possess at least a Diploma & Above
• Good communication skills, team player & target oriented.
• Familiar with MS Excel and MS Word.

· To identify project : Active participation and identification of prospective project through regular contacts with customer (face to customer)

· To liaise with allocated customer for sales acquisition

· To review customer requirements and prepare offers to allocated customer and follow-up offers with customer and keep updated project information

· To finalise and negotiate on contract with customers

· To commit and achieve the order intake budget

· To prepare project schedules

· To maintain existing account and help expand sales network

· Good contact with M&E Contractors & Consultant

Job Description

• To assist engineering supervisor in the review of project orders relevant specification and/or data sheets
• Act as secondary check and make recommendation based on common industrial engineering practice, where necessary
• To aid supervisor in providing and implementing cost effective and best engineering solutions for project in order to stay competitive
• To support sales, project and production team on various aspects of technical/engineering matters
• To prepare and maintain accurate engineering documents, i.e. general assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated accordingly
• To support and assist engineering supervisor in providing sound engineering practice and engineering calculation where applicable in a timely manner top meet project timeline
• Providing field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• To act as the main administrator and to maintain the SAP item master data
• To assist engineering supervisor and manager to drive the department’s improvement programs and/or process efficiency initiatives
• Perform additional related duties as requested or required

Job Requirement

• Bachelor degree / Diploma in Mechanical/Instrumentation or equivalent
• 1-2 years experience in either marine, oil & gas or automation industry is preferred
• Possess knowledge in instrumentation and control system
• Conversant with all industrial standards related to valve automation
• Able to read and interpret drawings, specifications and technical documents
• Knowledge of Autocad 2D/3D or drafting software and SAP will be an advantage
• Strong verbal and written communication skills
• Fresh graduates are welcome to apply for this entry level position

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

• Candidate must be able to read 2D and 3D drawings
• Candidate must be able to fabricate materials according to drawings
• Candidate must be a team player as well as a leader, he/she must be able to lead his team during major projects
• He must always keep a lookout for his colleagues with regards to safety issues etc

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical role in developing and modifying process formulations, methods and controls to meet quality standards. Your production engineering skills will help in recommending and implementing improvements, modifications or additions that will help in solving problems. You will review product requirements in terms of product development compatibility and help Pfizer determine optimum costs and schedules of production.

As a Senior Associate, your knowledge and skills will contribute towards the goals and objectives of the team. Your focus and ability to meet team targets will help in completing critical deliverables. Your innovative use of communication tools and techniques will facilitate in explaining difficult issues and establishing consensus between teams.

It is your hard work and dedication that will make Pfizer ready to achieve new milestones and help patients across the globe.

Position summary

Senior Process Engineer serves as a member of new product introduction team will be responsible for leading product manufacturing campaigns from the start of production, providing technical supervision with respect to quality and EHS until completion and release of the material.

The core role of this position is responsible to work with various stakeholders to assess the robustness of transferring processes and analytical methods to successful completion of New Product Introduction (NPI) technical transfer project, with associated risk reduced to an acceptable level.

Position responsibilities

Process Engineering

• Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe / models.
• Carry out technical assessment for evaluation of processes.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensuring the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians on the process and procedures as required.
• Own one or more multiple equipment / GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Organizational relationships

• Internal: Engineering, Process, Technical Services, Quality Operations
• External: Sending Site Subject Matter Experts

Qualifications

Must-Have

• Degree in engineering, preferably chemical engineering pr degree in science with major in chemistry.
• 3+ years of experience in a relevant manufacturing environment

Core competencies

• Process Engineering and Technical Knowledge
• Strong sense of commitment and dedication, with sense of urgency to get things done and results-drive attitude.
• Excellent interpersonal and communication skills, both verbal and written
• Strong team player, adaptable and versatile with the ability to work across different cultures.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for fresh graduate software engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

Fresh graduates welcome to apply for entry level positions.

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Principal Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 12 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Senior Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 4 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Staff Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 8 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

The Service Engineer is responsible for providing ocean going vessels with on-site and remote technical assistance regarding water and chemical treatment asset protection program adherence, energy management programs, cleaning solutions, welding, refrigeration and sealing products and installation services and repair of equipment. The Service Engineer will investigate and approve operational quality of onboard programs, processes and system equipment and instruct vessel crew in the operation and maintenance of the programs and systems. Serves as company liaison with customer on administrative and technical matters for assigned projects.

Principal Duties and Responsibilities:

• Analyze current application of Company programs and products onboard vessels
• Evaluate consistency of Water Treatment and Energy Management programs through on-site sample analysis and observation
• Collaborate with Chief Engineers and marine officers about full scope and application of Company product line
• Provide solutions for increased efficacy of Company products and identify potential vessel needs
• Supervise, whenever necessary, inspections, chemical cleanings, and installation and repair of Company equipment
• Provide training to the crew
• Maintain vessel information files through the use of service/technical assistance reports and conceptualize information towards achieving actionable knowledge
• Visit accounts with Account Executives and Area Manager to better understand client needs & key contacts
• Other tasks and projects may be assigned from time to time

Required / Desired Knowledge, Experiences and Skills:

• Relevant Bachelor’s or Diploma degree with 3-5 years’ experience, or 5-8 years of related experience, in a technical role in the Marine or Chemical industry
• Strong interpersonal skills when working with colleagues and international maritime clients
• Strong communication skills, both verbal and written
• Strong technical knowledge and experience
• Flexible and motivated work ethic, with desire to serve the needs of the clients
• Commitment to safe working practices and environmental stewardship
• Understanding of maritime regulations a plus

Education/Certifications:

• Degree or Diploma with over 2 years of experience in Marine engineering and Mechanical or chemical engineering related background

Physical Working Environment:

Position may be exposed to harsh industrial and external elements such as heat, vibration, noise and weather when onboard vessels and at ports. Must be able to navigate the structures and obstacles commonly found on ocean going vessels, such as vertical stairs, gangways, and narrow passages, and poses safety awareness around operating machinery and moving objects. Position requires travel approximately 25%.

Job Description:

Requires an expert with knowledge of a broad range of IT technologies.
* Proven 2years of experience as an IT professional.
* Knowledge of Linux/UNIX and/or Windows Server operating systems is essential
* Understanding of Nutanix prism, Microsoft HyperV and related virtualisation technologies
* A good knowledge of MS SQL
* An understanding of SAN, NAS and Veeam storage technologies including storage replication
* Maintain inventory and asset configuration documentation for network switches, servers and workstations.
* Ensure the implementation of IT Security System that are aligned of High Availability and Disaster Recovery
* Ensure network security, efficiency and availability for entire IT infrastructure.
* Experience of open-source software and the principals behind it. and using it
* Knowledge of capacity planning and performance measurement techniques
* Strive to learn and ability to interpret performance statistics, identify bottlenecks and translate application load projections into infrastructure utilization projections
* An understanding of Enterprise Security and IT risk management
* Some knowledge of programming languages and current software development practices such as Visual Stdio

Requirements:
- Diploma or Degree in Electronic or IT
- At least 2 years in related field
- Knowledge of VM, Microsoft Servers, Unix, VLAN and etc.
- Knowledge of server and desktop hardware troubleshooting and setup
- Strong analytical, problem solving and decision-making skills
- Ability to work Independently
- Preferable with CCNA