About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Oversee the installation, calibration, and testing of instrumentation and control systems
• Conduct functional and performance tests for instrumentation and control systems
• Identify and troubleshoot issues during commissioning and ensure timely resolution
• Collaborate with engineering and construction teams to ensure seamless integration of systems
• Prepare and maintain accurate documentation and reports related to commissioning activities
• Ensure compliance with safety standards and protocols
• Any other duties to be assigned from time to time

Pre-requsites:

• Bachelor's degree in Electrical, Instrumentation, or a related engineering field.
• Minimum 5 years of experience in commissioning instrumentation and control systems in power plant or industrial projects
• Strong knowledge of control systems, instrumentation and DCS
• Excellent troubleshooting and problem-solving skills
• Ability to work in a team environment and communicate effectively
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

Responsibilities for this position include:

• Broad-based, hands on knowledge and experience with various types of instrument and electrical systems, equipment and software
• Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation
• Update and archive electrical prints, PLC programs, and operator interface software, necessary for the documentation of projects that have gone into production
• Update and archive electrical prints, PLC programs, operator interface software, necessary for the documentation of projects that have gone into production
• Design electrical control and communication systems for production equipment
• Coordinate the installation of electrical equipment by contractors and plant personnel to meet scheduled completion dates
• Carry out the effective delivery of electrical, mechanical and fabric maintenance to both plant equipment and building equipment on the Client’s sites

Desired experience for electrical maintenance engineer includes:

• Provide technical support to Maintenance for AC and DC electronic drives, Programmable Logic Controllers, and control systems
• Provide cost estimates for new projects and system upgrades
• Develop specifications for projects to assure completion of work on schedule with required materials and workmanship
• Assist Production and Maintenance in the start-up and operation of new equipment and facilities

Responsibilities:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements
• Work closely with the Professional Engineers, regulatory authorities and contractors to provide supervision on site, to resolve all site issues and ensure timely completion of the projects
• Implement the site supervision quality and safety assurance system
• To carry out all inspection that is under KTP’s submission, Including ERSS, and specialist work that will need his supervision, whenever required.

Requirements:

• Degree in Civil Engineering recognised by BCA, Singapore
• Must be an accredited Resident Engineer with IES, Singapore, upon successful hiring
• Fresh graduates / Resident Engineers with other specializations are welcome to apply
• Candidates with HDB experience are an added advantage and strong encouraged to apply

Scope of job:

1. Installation and Commissioning:

• Install electrical systems, equipment, and machinery as per technical specifications and safety regulations.
• Assist in the commissioning of electrical systems and ensure they are operating correctly.
• Ensure all installations are in compliance with the relevant codes and standards.

2. Maintenance & Troubleshooting:

• Conduct routine maintenance checks on electrical systems to ensure efficient functioning.
• Diagnose faults, troubleshoot electrical problems, and repair or replace faulty components.
• Provide preventive maintenance to avoid breakdowns and optimize system performance.

3. Customer Support:

• Offer on-site and remote technical support to customers, ensuring customer satisfaction.
• Respond to customer queries and resolve electrical issues promptly.
• Provide training and guidance to customers on proper use and maintenance of electrical systems.

4. System Upgrades:

• Assess and recommend upgrades to existing electrical systems and equipment.
• Implement system improvements to enhance functionality, safety, and efficiency.

5. Safety & Compliance:

• Follow all safety protocols, electrical codes, and regulations to maintain a safe working environment.
• Conduct safety inspections and risk assessments on electrical systems and equipment.
• Ensure compliance with local, national, and industry-specific electrical standards.

6. Documentation & Reporting:

• Maintain accurate records of service activities, including repairs, maintenance, and customer interactions.
• Prepare and submit detailed reports on findings, repairs, and service schedules.
• Maintain an inventory of electrical components and tools.
• Monitor progress on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Prepare timesheets and service report upon completion of all works and ensure all document is properly endorsed/verified by customer and uploaded to serve on time.

7. Collaboration & Coordination:

• Work closely with project managers, technical teams, and clients to understand service requirements.
• Coordinate with suppliers and vendors for spare parts and service tools.
• Collaborate with colleagues to ensure efficient and effective project execution.

8. Continuous Improvement:

• Stay updated with the latest electrical technologies, techniques, and industry best practices.
• Attend training and certification programs to enhance skills and knowledge.
• Contribute ideas for improving service efficiency and customer satisfaction.

Required Skills & Qualifications:

· Education:

• A bachelor’s degree or equivalent qualification in Electrical Engineering, Electronics, or a related field.
• Certification in electrical systems or maintenance (e.g., NEC, NFPA) is a plus.

· Experience:

• Proven experience as an Electrical Service Engineer or similar role (typically 5 years above).
• Hands-on experience with electrical systems, wiring, motors, circuit boards, and related components.
• Familiarity with diagnostic tools, testing equipment, and electrical schematics.

· Technical Skills:

• Strong knowledge of electrical systems, circuits, and components.
• Proficient in using electrical diagnostic tools, multimeters, and testing devices.
• Understanding of electrical safety regulations and standards.

· Soft Skills:

• Excellent problem-solving and troubleshooting abilities.
• Strong communication skills (both verbal and written).
• Ability to work independently and as part of a team.
• Customer-oriented with a focus on delivering high-quality service.

Physical Requirements:

• Ability to lift and carry heavy electrical components and tools.
• Ability to work in confined spaces or at heights when required.
• Comfortable working in various weather conditions for outdoor jobs.
• Commissioning, start-up, and testing of mechanical, hydraulic, control system and electric integration system on newly build vessel.
• Recommendation of Spare Parts or solutions to customer during Repair or Troubleshoots Works.
• Constant monitoring of the progress and quality on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Ensure our Equipment’s perform as per requirement and satisfaction of Customer.

Work Environment:

• The role requires travel to client sites for installations, maintenance, and repairs.
• Work hours may vary based on project deadlines or emergency service calls.

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

We are seeking a highly skilled and motivated Project Engineer to join our team in the marine field. The successful candidate will manage and oversee projects from inception to completion, ensuring all objectives are met on time and within budget. The Project Engineer will coordinate on-site activities, working closely with designers, shipyards, and vendors to drive project success. This role requires strong leadership, exceptional organizational skills, and the ability to communicate effectively with diverse teams and stakeholders.

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Tasks and Responsibilities

• To assist Fire Safety Manager in the implementation of protocols as per Emergency Response Procedure (ERP) to be in line and compliance with Singapore Fire Code requirements.
• To assist Fire Safety Manager in conducting relevant drills as per frequency stipulated by SCDF.
• To enforce on compliance of all Fire safety related legislations and Pollution control matters.
• To develop, plan and conduct training relevant to emergency response scenarios to all relevant staff and contractors within PaxOcean.
• To organise and conduct first aid & rescue related training to all HSE and yard staff.
• To lead appointed CERT members in firefighting, rescue and oil pollution control operations.
• To support in the administration and conduct of all other HSE related training i.e., Safety Induction Program for all staff & subcontractors.
• To be in charge of planning, inspecting, replenishing and maintenance of all emergency response equipment within HSE department Store in accordance manufacturers recommendation and/or industry best practices.
• To support and provide first aid treatment to casualties in times of emergency.
• To ensure that all fire fighting, fire suppression and rescue/ first aid equipment are maintained periodically as per manufacturer’s or Industry best practices.

Job Requirements

• At least 3-5 years of SCDF Experience on Emergency.
• NITEC or higher NITEC or equivalent and above.
• At least 3-5 years of actual front-line emergency response experience including (but not limited to) Firefighting and casualties Rescue, Confined Space Rescue, Work at Height Rescue
• Experience in leading and managing a team of responders for the mentioned emergency scenarios
• Candidates without prior experience are encouraged to apply.

In this role, you will:

• Responsible for machine wiring, troubleshooting, and performing functional checks on electrical systems in prototypes.
• Documenting activities in technical reports and also support for basic mechanical assembly.

Responsibilities:

• Wire prototype machines according to design specifications.
• Identify and troubleshoot electrical issues for prototype machine.
• Perform function check to ensure that the prototype operates as intended.
• Document activities and troubleshooting processes in technical reports.
• Provide supporting basic mechanical assembly

Requirements:

• Diploma in Electrical Engineering or Equivalent
• Able to Interpret electrical schematics, diagrams, and technical documents.
• Independent and ability to diagnose and resolve electrical problems.
• Hands-on experience with machine.
• Good time management, pro-active, self-motivated and high sense of responsibility.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in shell Seraya Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

1.1. Lead and manage the implementation, delivery and operations of digital services, including ICT governance, budget management, application architecture and stakeholder engagement to achieve digital services transformation for the agency.

1.2. Provide experienced technical leadership and direction for digital services

1.3. Define application architecture framework for various components in the end-to-end digital solution and build architecture roadmap.

1.4. Review existing design and implement solutions for improvement from performance, security and usability perspective

1.5. Involved in procurement and vendor management.

1.6. Develop risk identification, quantification and mitigation plan.

1.7. Understand and ensure compliance with policies, standards, and guidelines in Infocomm Technology and Smart Systems Management defined by Singapore Government.

1.8. Prepare technical documentation and design, and conduct sharing sessions

1.9. Improve relevant work systems, processes and SOPs to achieve consistent results.

1.10. Good knowledge of next generation IT, such as cloud technology, IoT, data analytics, system architecture, etc

1.11. Work with Project Manager and clients to handle resources, scope, and schedule

1.12. Design Technology and Application architecture.

1.13. Convert system requirements into software architecture and design documentation.

1.14. Interface and coordinate tasks with Module Leaders to ensure all modules within the system are progressing as planned, and modules can be integrated smoothly.

1.15. Understand and determine clients’ requirements, expectations and design the technical infrastructure.

Job Requirement

1.1. Relevant background in Computer Science/Computer Technology or equivalent.

1.2. Minimum 8 years of working experience in digital service implementation, IT outsourcing management and ICT security.

1.3. Hands-on experience across the spectrum of Web and mobile technologies, such as Microsoft .NET technologies (e.g. C#, ASP.NET MVC 5), HTML5, JQuery, JavaScript, CSS, Microsoft SQL Server/Oracle database management

Roles & Responsibilities

* Project management, system testing, technical analysis

* Providing engineering design support

* technical documentation

* Performing analysis and diagnostics for battery energy storage systems

* Managing battery energy storage systems

Job highlights

4 off days monthly, rest days depend on schedule

Competitive salary 3k and above

Positive and nurturing working environment

Work location: co location

Duration: permanent

Requirements

Qualifications - diploma or high school diploma above

Work experience- at least two year working experience in related fields

Job type- full time

Required languages: English and able to communicate with mandarin speaking customers

Job specialisation- services,engineering

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

Responsibilities:

• Prepares key project documentation in executing the complete Telecom and Navigation engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares telecom system concepts, schedule of deliverables and plan activities in line with overall project schedule, delegate the tasks to telecom team member assigned to the project and monitor the progress
• Leads telecom teams to prepare documents, such as design philosophies, block diagrams, room layout and deck arrangement, cable schedules and etc
• Leads telecom teams to perform system design verification, such as PAGA sound coverage, PAGA voltage drop calculation, Link budget, system redundancy cabling etc. Coordinates with other engineering team members (i.e.yard engineering, basic design and etc.), subcontractors and consultants on technical issues and design solutions in meeting project deliverables
• Leads telecom team to prepare procurement engineering documents, such as technical specifications, equipment data sheets, MTO, technical bid evaluation etc
• Participates in project meeting/technical meeting/3D model review/Workshop, attends to basic technical queries and issues related to Telecom and Navigation system design and reviews the deliverables (i.e.VCD, third party study report, workshop report etc)
• Participates and support for Digital Security review regarding the network design and security implementation
• Liaises with owners, statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Works with Procurement and project team to source for Telecom & Navigation vendors or Telecom System Integrator in complying with the project technical requirement specifications in meeting project deliverables
• Prepares engineering deliverable such as interconnection diagram, termination diagram, room & equipment layout in compliance with requirements of contract, classifications and regulations and coordinate with various disciplines for material handling, working environment requirement, constructability and installations, operations and maintenance, and safety etc
• Provides solutions to commercial, production and project team members on all aspects of Telecom engineering to support new-built’s/conversion fabrication, installation, testing and commissioning activities
• Performs technical studies and site survey in cooperation with production team members and Telecom & Navigation vendors or Telecom System Integrator for conversion project and/or repair & life extension project
• Performs any other duties as assigned by superior(s) from time to time

Requirements:

• Bachelor’s degree in Electrical and Electronics Engineering, Telecommunication Engineering or related engineering disciplines
• 3 years of working experience in planning, designing and construction of Telecom and Navigation system in the oil and gas industry
• Experience in telecom and navigation system design in Pre-FEED, FEED, EPCC, Conversion and Repair & Life Extension.
• Familiarity with USCG and BSEE requirements will be an additional advantages
• Excellent proficiency in English (written and spoken)

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

· Technically sound and consistently designed and delivered to client’s project requirements

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned.

· Assist Professional Engineer in management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Diploma in Mechanical Engineering from a recognized Polytechnic with more than 5 years of working experience in engineering design consulting practice on Building Services projects

· Degree in Mechanical Engineering from a recognized University and eligible for registration with the Professional Engineers Board with more than 3 years of working experience in engineering design consulting practice on Building Services projects.

· Being a Professional Engineer is an advantage.

· Strong project technical knowledge and design softwares

· Good supervision and project management skills

· Excellent with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Lead team of staff for successful delivery of projects

· Strong analytical skills would be preferred

· Excellent interpersonal, good written and verbal communication skills

· Strong time management and resources management skill

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

About Us

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT storage solution has an expected life span of 25 years and is proven to be one of the safest and most environmentally friendly battery technologies. VFT founders have deep experience in the renewable space, and Vanadium redox flow technology. VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU.

The Cloud Software Engineer must be able to work effectively in a collaborative, fast paced environment providing experience on energy storage systems. They will demonstrate strong project management, development, and execution capabilities. The successful candidate will be an innovative thinker, fast-learner, collaborative worker, and self-starter with a passion for the renewable energy industry holding a track record of success thriving in a high growth environment.

Responsibilities:

· Develop and Collaborate on IoT products and solution in cloud based IoT Platform by interfacing Energy Management Systems (EMS) and Battery Management System (BMS).

· Design, Development, Testing and Maintenance of IoT Cloud Software stack in Energy Management Systems (EMS) and Battery Management System (BMS).

· You should be familiar with the operation of ESS (Energy Storage Systems) and implement various energy and battery management graphs and data display and will need to have passion for battery and energy management solutions.

· You should follow software development lifecycle practices including design and reviews, testing and regression, revision control, and user documentation.

Requirements:

· Minimum Bachelor’s Degree in computer/electronics engineering or relevant discipline with minimum 2 years of relevant professional development experience.

· Must have software development experience in C/C++, Python, JavaScript, NodeJS, JSON and SQL or other relevant programming languages.

· Experience with IOT cloud technology, instrumental monitoring, remote monitoring and IoT Device knowledge (Gateway, Sensor).

· You should have knowledge of communication interfaces and protocols, such as RS232, RS485, CAN, Modbus-TCP, Modbus-RTU, etc.

· Familiar in DevOps practices and CI/CD pipelines

· You will be required to travel for business.

· Knowledge on battery technology would be ideal