Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:
We are looking for a skilled and innovative AI System Hardware Engineer to join our team. In this role, you will take ownership of the full hardware R&D process, drive innovation, and ensure high-quality deliverables. If you’re passionate about cutting-edge hardware design and enjoy tackling complex challenges, we’d love to hear from you.

Key Responsibilities:

Lead the entire hardware R&D process, including:

• ASIC bring-up
• Developing hardware design schemes
• Selecting components
• Designing schematics and inspecting PCBs
• Conducting testing, debugging, and ensuring successful mass production
• Design innovative hardware solutions that enhance product functionality, performance, cost efficiency, and quality.

Qualifications:

• Education:Bachelor’s degree or higher in Computer Science, Electronics Engineering, or a related field.
• Technical Skills:Strong understanding of high-speed signal integrity and power distribution techniques.
  Familiarity with modern processors, including GPUs, FPGAs, and X86 architecture.
• Experience:Proven experience with ASIC bring-up and hardware validation.
  Proficient in using testing tools such as power sources, loads, and oscilloscopes.
• Tools:Expertise in hardware design software such as Cadence, Allegro, or similar tools.
  

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Responsibilities

• To ensure smooth operation of site activities.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule

Qualifications

• Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification.
• Experience/Knowledge in structural steel works/ precast RC works/ Building/ MRT/ LTA is an advantage
• More than 8-years of site experience in Construction sector.
• Good team player and able to work independently
• BCSS Certificate
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Mission:

- Develop Go to Market Strategies on the IDEC’s focused products for specific vertical markets in the APAC Region

- Meet the growth target of product group in the APAC

- Develop sales across APAC & Middle East as per assigned targets

- Assist distribution channel during customer visits to conduct design-in opportunity

- Regular visits to direct account/customers to maximize IDEC opportunities

- Generate NBO (New Business Opportunities)

- Maintain a strong level of relationship with Distributors & Direct Accounts

- Following the group's pricing and sales policies

- Provide timely and accurate weekly and monthly Sales report to the sales management

- Maintain and share competitive intelligence

- provide customers feedback, market trend and new product development ideas to the sales/product management

Main Tasks:

- Tracking product performance against target

- Provide go to market strategy and for successful penetration into the focused vertical markets, identifying suitable portfolio for specific vertical markets

- Sales management and mentoring of distributors in assigned territories to generate NBOs and achieve budget

- Periodic visits to the distributors to conduct business reviews and regular joint customer visits

- Raise and follow up special price enquiries, prepare quotations with objective to maximize margin

- Assist distributors during exhibitions both at Marcom level and physical presence during the event

- Finding new prospective distributors and customers when needed

- Analyzing feedback from various channels and proposal of actions to Management

- Collect and feedback any competition information

- Prepare and Manage Sales Forecast quarterly/yearly in conjunction with Company Business Plan

- Work with colleagues and managers to understand & promote Company strategy & objectives

- Presentation of periodic reports with activity analysis

- Any other reasonably duties define by direct manager

Key Performance Indicators:

- Achievement of company turnover objective

- Achievement of personal turnover objective

- Achievement of Product and Vertical market growth target

- Achievement of NBO generation & win (number to be defined)

Territory Focus: APAC and Middle East. Region to be defined (e.g. Singapore, Malaysia, Indonesia, Vietnam, Philippines, S. Korea, Australia)

Candidate Profile:

- Bachelor’s Degree in electrical engineering is preferred (not mandatory)

- Minimum of 4 years of experience in OEM or distribution sales, product management

- Experience working with multiple distribution channels

- Ability to translate customer requirements into workable solutions

- Strong oral and written communications skills

- Strong technical aptitude & the ability to understand & communicate technical information

- Strong organizational skills & the ability to coordinate multiple projects simultaneously

- Able to travel overseas as required

- Good attention to detail and strong follow-up skills

- Ability to analyse sales results, interpret data and prepare action plan accordingly

- Knowledge of Microsoft Word, Excel and PowerPoint

- Experience with Salesforce.com is a plus (not mandatory)

- Posess a driving licence and car is desired (not mandatory)

Attractive package based on fixed salary + Variable bonus based on KPI’s achievement + Local travel allowance + Telephone allowance.

Permanent, Singapore-based Electronics Service/Application Engineer for Electronics Test and Measurement Instruments. 5 days week (9.00 AM to 6.00 PM) Located near Lavender MRT station.

· Perform hands-on troubleshooting, service and repairs either in house or on-site.

· Provide on-site implementation, commissioning, testing and system integration support.

· On-the-job training is provided.

· Support Existing and New Project

· Any other duties as assign by superior and management

Job Requirements:

· ITE /NiTEC, Diploma in Electronics Electrical Engineering.

· Fresh graduate or 1 year or more working experience

· Preferable experience in Electronics Test and Measurement Instrument/Power Engineering/Battery

· Class 2/3 driver licence.

· Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Job Type: Full-time

Job Types: Full-time, Permanent

Salary: $3,500.00 - $5,500.00 per month

Job Position:- Senior Resident Engineer (C&S)

Time:- Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• More than 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

BROAD FUNCTION

A dedicated and proactive IT Support Engineer with a strong foundation in supporting environments primarily consisting of Windows devices and the Microsoft 365 suite.

Manage IT assets and responsible for troubleshooting/repair, providing technical support, and ensuring seamless end-user IT operations.

Effectively support the organization's IT needs, contribute to a positive user experience, and grow within the role.

ROLES AND RESPONSIBILITIES

• Provide Technical Support: Ensure timely and effective resolution of technical issues related to windows devices and Microsoft 365 applications, minimizing downtime and maintaining productivity.
• Enhance User Experience: Deliver high-quality customer service and support to end-users, ensuring their IT needs are met and they are satisfied with the solutions provided.
• Maintain IT Infrastructure: Assist in the maintenance and optimization of the IT infrastructure, including performing routine updates, backups, and system monitoring to ensure smooth operations.
• Support IT Projects: Contribute to various IT projects and initiatives, providing support and collaborating with the IT team to achieve project goals and improve IT services.
• Develop Technical Skills: Continuously learn and develop technical skills to stay updated with the latest technologies and best practices, enhancing the overall capability of the IT support team.
• Documentation and Reporting: Create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps, ensuring knowledge is shared and easily accessible within the team.
• User Training and Education: Conduct training sessions and create user guides to help end-users effectively utilize Windows devices and Microsoft 365 applications, promoting best practices and reducing common issues.
• On Rotating Roster: Provide standby support during off-office hours and weekend on a rotational basis.
• Ad-Hoc Assignments: carry out any other tasks assigned by the Supervisor or Reporting Officer.

EXPERIENCE

• Technical Support: Provided first-level support to users, resolving issues related to Windows devices and Microsoft 365 applications. Assisted in setting up new workstations and configuring user accounts.
• Incident Management: Logged and tracked support tickets using IT service management tools. Ensured timely resolution of incidents and escalated complex issues to senior engineers when necessary.
• System Maintenance: Performed routine maintenance tasks such as software updates, system backups, and virus scans. Monitored system performance and implemented necessary optimizations.
• User Training: Conducted training sessions for end-users on best practices for using Windows devices and Microsoft 365 applications. Created user guides and FAQs to assist with common issues.
• Collaboration: Worked closely with the IT team to support various projects and initiatives. Participated in team meetings and contributed to the continuous improvement of IT services.

SKILLS

• Technical Support: Proficient in diagnosing and resolving hardware and software issues on Windows devices. Experienced in providing remote and on-site support to end-users.
• Microsoft 365: Skilled in managing and troubleshooting Microsoft 365 applications, including Outlook, Teams, OneDrive, and SharePoint. Familiar with user account management and license allocation.
• Windows OS: Strong understanding of Windows operating systems (Windows 10/11), including installation, configuration, and maintenance. Knowledgeable in Active Directory for user and group management.
• Networking: Basic knowledge of networking concepts such as TCP/IP, DNS, DHCP, and VPN. Capable of troubleshooting connectivity issues.
• Customer Service: Excellent communication and interpersonal skills, with a focus on delivering high-quality support and ensuring user satisfaction.
• Documentation: Ability to create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps.

QUALIFICATIONS

• Diploma or Bachelor's Degree in IT with minimally 3-5 years of relevant experience.
• With relevant certifications such as CompTIA A+, Microsoft Certified: Modern Desktop Administrator Associate, Azure Fundamentals, CCNA, or equivalent will be an advantage.

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Key Responsibilities:

• Design and implement network architectures for LAN/WAN/Wireless
• Configure and deploy routing protocols (OSPF, EIGRP, BGP).
• Implement switching protocols (STP, MSTP, VLANs).
• Design and implement network security measures (firewalls, ACLs, VPNs).
• Support, Configure, Maintain and Upgrade corporate customer’s network devices
• Ensure network security and connectivity
• Monitor network performance (availability, utilization, throughput and latency)
• Incident/Problem/Change/Service Request/Configuration Management.
• Create and maintain technical documentation (network diagrams, configurations).
• Assist in network design and implementation.

Experience:

• 8 - 10 years of experience in supporting, configuration, maintenance, and upgrading corporate customer’s network devices.
• CCNP certified (Routing and Switching).
• Good understanding and hands-on experience of networking protocols like routing and switching and Wireless (Physical experience in data centres for all Network devices/equipment).
• Experience in Firewall configuration and network security policy implementation. Hands-on experience on FortiGate/Cisco/Palo Alto/Aruba/ Huawei is desirable.
• Experience in debugging and fixing technical problems in network by coordinating with vendors, data centre and onsite support teams whenever required.
• Have experience in creating network documents and flow diagrams.
• Hands-on remote access and site to site VPN.
• Experience in monitoring tools like solar wind, NMS, Wireshark, MRTG Cacti etc.
• Knowledge of Windows, Linux and Load Balancer will be added advantage.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

PRODUCTION ENGINEER/ EXECUTIVE ($3,500 - $4,000)

LOCATION: PANDAN RESERVOIR

WORKING TIMING: 7.30AM-5.00PM (5DAYS WORK WEEK)

1. We need a engineer or assistant engineer with mechanical educational background or years of experience hand on mechanical troubleshooting.

2. We can also search for experience technician that want to upgrade as assistant engineer or engineer.

JOB DUTIES & RESPONSIBLITIES:

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.

2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.

3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.

4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.

5. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.

6. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.

7. Maintain and improve housekeeping in all areas.

8. Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.

9. Ensure on time submission of overtime record to HR Dept for computation of monthly salary.

10. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.

11. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.

12. Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.

13. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.

14. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.

15. Assist in hiring of production personnel.

16. Maintain and update operating manuals for all the manufacturing equipment and facilities.

17. Maintain and update operating training manuals for all manufacturing processes.

18. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Skill/Experience

* Minimum 2-3 years working experience in manufacturing environment.

* NITEC/ HIGHER NITEC / DIPOLMA IN M&E OR MECHANICAL

* Able to supervise and lead the subordinates.

* Willing to work after working hour or during non-working days.

* Able to work under pressure.

* Computer literate.

* Knowledge in ISO is an advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

Job Purpose:

To support the Program Manager in strengthening existing customer relationships and ensuring smooth day-to-day operations, which include New Product Introduction (NPI), Order Administration, BOM Management and Planning.

Job Description:

1. Customer Relationship Management

• Build and maintain strong relationship with customers by identifying and assessing customers’ current and future needs
• Timely fulfilment of customers’ orders or communication of schedule revision
• Liaise with internal departments to ensure orders will be fulfilled on time
• Respond to all customers’ inquiries promptly
• Prepare and provide reports and proposals to customers as required
• Support customers’ audits and visits when necessary

2. New Product Release

• Responsible for ECN (Engineering Change) and new BOM (Bill of Material) management, which includes item master creations.
• Ensure that all ECNs and BOMs are cross checked before releasing it and any ad hoc amendment to the BOM through internal ECN or waiver
• Manage FAA (First Article Approval) submission and approval.
• Define Production Routing Guide for manufacturing
• Ensure packing handling units (carton & palletization) are defined accordingly
• Maintain customer part numbers in ERP system
• Manage EOL (End of Life) of products.
• Handles new customer requirement that involves ERP system update and UAT
• Work together with manufacturing engineer & production to define the relevant process or packing instruction
• Maintain the relevant documents pertaining to BOM management, which includes work instruction, sticker placement
• Interface customer with respect to NPR, ECN, and FCS launch management
• Prepare samples for customer review/approval
• Prepare and participate in customer audit on new SKUs or artwork
• Create BOM structure for all new product release from sketch and maintain item, BOM, ECN and void in customer's SAP as per customer requirements

3. Report and Masterlist Tracking

• Ensure FAA Tracking List and BOM masterlist are well maintained
• Prepare launch tracking report
• Prepare QBR data on relevant sections
• Prepare weekly/ monthly reports as requested by customers and management

4. Order Processing

• Acknowledge and process sales orders, coordinate with various departments and related parties to fulfil order
• Prepares samples, price estimates and quotations within customer’s expectations and timeframe
• Creates work orders for production and replacement work orders if necessary
• Ensure prompt billing of invoices and assist in overdue payment collection
• Manage customer’s product content effectively

5. Material Planning

• Plan and make purchase requisition for necessary materials to ensure materials availability in meeting production needs while minimizing inventory holding/costs
• Manages inventory level for raw materials, work-in-progress and finished goods
• Analyse order trends and prepare forecast schedule to material planner

6. Productivity and Innovation

• Identify potential improvement initiatives
• Implement feasible improvement initiatives to enhance effectiveness, efficiency and/or economy

Job Requirements:

• Diploma/Degree in Business Administration, Supply Chain Management or other relevant fields
• 1 – 2 years of experience in operations/supply chain environment (Program Administrator)
• 3 – 5 years of experience in operations/supply chain environment (Senior Program Administrator)
• Strong interpersonal skills with good presentation and communication abilities
• Independent and proactive, with strong customer service orientation.
• Experience in printing and packaging industry will be an added advantage
• Knowledge in MRP and SAP systems will be added advantage