As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. of 8 years of relevant verification experiences.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

• Position : Service Technician (Electrical Engineer-Desalination/Water treatment)
• Location : Jurong Island-Company transport provided at Choa Chu Kang/ Jurong East MRT station
• Working hours : Monday -Friday, 9.00am-6.00pm
• Salary (commensurate with experience): Up to $3200+ Site Allowance + 1 month completion bonus + 14 days annual leave + Medical reimbursement + 2 days Family Day
• Duration : 2 year contract - convertible or renewable
• Industry : Power Generation

Main Responsibilities:

• Carry out inspection and maintenance of electrical equipment in Desalination Plant
• Perform troubleshoot and implement solution for safety and maintenance work
• Supervision of contractors and perform administrative duties to ensure high quality of work and comply to safe work procedures

Requirements:

• Diploma in Chemical/ Environmental Engineering (or equivalent) with minimum 1-2 years of related experience in Utilities, Power, Petrochemical or Process Plant
• Candidate without experience or NITEC in Chemical/ Environmental Engineering (or equivalent) with minimum 2-3 years of related experience in Utilities, Power, Petrochemical or Process Plant are welcome to apply
• Willing to OT on weekend/ Public Holiday
• ALL WELCOME!!

Email to [email protected]

***We DO NOT charge our candidates any referral fee nor bind them with

any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Diploma or Degree in mech/ civil/ industrial engineering with 6-10 years of experience , Willing to work at construction site and process plants . Expect fabrication, piping standards, equipment installation , with erection and commissioning knowledge . Atleast 2 of the above is a must . Candidates without necessary qualifications but willing to learn and come up are encouraged to apply too

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Role & Responsibilities:

• Responsibilities include diagnosing appropriate levels of metal/metal-alloy contaminations by oxygen and other contaminants; determining the root cause of contaminants, and establishing protocols for characterizations.
• Hands-on providing support for onsite metal PVD, including creating, running, and characterizing recipes to achieve the lowest resistances.
• Collaborates closely with equipment vendors and device engineers to optimize the metal-stack for device performances and robustness/reliability, from low to high temperatures.
• Lead data analysis related to implant-induced defects and cleaning issues on metal contacts with solutions development.
• Examines the work-functions of metal/metal-alloys suitable for Ohmic contact on SiC.
• Responsible for designing experiments for Ohmic contact on various SiC substrates with different doping types, determining their impact, and resolving issues to achieve the lowest specific contact resistances.
• Designing cleaning processes to obtain ideal Schottky diode using various metal/metal-alloys on SiC for high-performance applications.
• Work closely with cross-departmental and integration teams and in 3-5 years’ time develop a WBG backend process integration team of at least 4 persons.

Requirements:

• PhD Degree in Material Science, Physics, Electrical Engineering or related field.
• >8 years related industrial experience inclusing backend process module integration.
• Extensive hands-on experience in PVD (Physical Vapor Deposition) processing for metal depositions and interface tuning.
• Strong understanding of metal-semiconductor contact physics.
• Expertise in work-function tunings of metal and metal-alloy.
• Proficiency in modulating electron affinity through implantation or surface treatments of semiconductors.
• Familiarity with wide band-gap semiconductor materials and their interaction with metal/metal-alloys at various temperatures.
• Thorough fundamentals in Ohmic contact and Schottky diode physics, as well as the impact of defects and contaminations on electrical properties.
• Skilled at mentoring and transferring knowledge to junior staff members.
• Excellent communication skills to effectively address customers' needs, concerns, and solution requirements.

Role & Responsibilities:

• Responsibilities include diagnosing appropriate levels of metal/metal-alloy contaminations by oxygen and other contaminants; determining the root cause of contaminants, and establishing protocols for characterizations.
• Hands-on providing support for onsite metal PVD, including creating, running, and characterizing recipes to achieve the lowest resistances.
• Collaborates closely with equipment vendors and device engineers to optimize the metal-stack for device performances and robustness/reliability, from low to high temperatures.
• Lead data analysis related to implant-induced defects and cleaning issues on metal contacts with solutions development.
• Examines the work-functions of metal/metal-alloys suitable for Ohmic contact on SiC.
• Responsible for designing experiments for Ohmic contact on various SiC substrates with different doping types, determining their impact, and resolving issues to achieve the lowest specific contact resistances.
• Designing cleaning processes to obtain ideal Schottky diode using various metal/metal-alloys on SiC for high-performance applications.
• Work closely with cross-departmental and integration teams and in 3-5 years’ time develop a WBG backend process integration team of at least 4 persons.

Requirements:

• PhD Degree in Material Science, Physics, Electrical Engineering or related field.
• >8 years related industrial experience inclusing backend process module integration.
• Extensive hands-on experience in PVD (Physical Vapor Deposition) processing for metal depositions and interface tuning.
• Strong understanding of metal-semiconductor contact physics.
• Expertise in work-function tunings of metal and metal-alloy.
• Proficiency in modulating electron affinity through implantation or surface treatments of semiconductors.
• Familiarity with wide band-gap semiconductor materials and their interaction with metal/metal-alloys at various temperatures.
• Thorough fundamentals in Ohmic contact and Schottky diode physics, as well as the impact of defects and contaminations on electrical properties.
• Skilled at mentoring and transferring knowledge to junior staff members.
• Excellent communication skills to effectively address customers' needs, concerns, and solution requirements.

If you fancy a cool, easy-going atmosphere full of dynamic and spirited individuals, you are at the right place.

We are on the lookout for passionate, optimistic and fun-loving people to join our big family of Wonderful People.

With our wide array of hotels and brands, there are countless opportunities and exposure to work in different stories. You will be immersed with prospects in career and learning development, employee recognition, mentorship and benefits even when you travel.

Job Details (Here’s what you can expect!)

• You get to work primarily in 1 of our 25 hotels in Singapore
• 5 days’ work week and overtime
• Duty Meal allowance and uniform allowance
• Attractive incentive and bonus
• Staff rates at Accor hotels in Singapore and worldwide
• Birthday leave

Requirements

• 1 to 2 years working experiences, preferably with relevant hands-on experience in building related or hospitality industry.
• Degree in Engineering is preferred or equivalent.
• Resourceful, proactive and team player.
• Good interpersonal and communication skill.
• Service-oriented with good personality.

Responsibilities:

• Attend to complaints/ reporting of breakdown of services within the hotel premises.
• Diagnostic testing and inspection for all electrical and mechanical equipment, sanitary and plumbing system, and arrangement of faulty items for repair work.
• Diagnostic testing and inspection of air-conditioning system including fan coil unit, compressor, control IC board and piping works for both preventive and repair work.
• Managing stocks for M&E spare parts, electrical works, sanitary and tracking of stock level.
• Ad-hoc duties as per assigned

Responsibilities:

To support the Personalization department to operate & manage customer’s product efficiently. Owner of the local personalization process, CR and UAT/BAP.

• Lead any new project triggered by Sales Support / R&D on operation point of view and analyse impacts to get production constraints integrated
• To be responsible for producing sample and UAT/PAT cards in the course of Order Tendering process and Profile Development phase.
• Own the integrated change management process on job setups, product matrix and templates as needed to provide customer(s) their requested output
• Trigger and Lead internal project in order to increase productivity, improve security and reduce operational cost by applying “lean” concepts
• Ensure the installation and testing of new software packages (data processing, Perso machine or Perso controller software), related to a product release or new product / customer, in coordination with Perso development teams (GGS, France)
• Ensure full automation of daily processing of customer data and report generation
• Troubleshoot data processing issues working as needed with IT and GGS
• Investigate and develop on-site new tools to improve Personalization Data Flows, Quality or Production Efficiency
• Ensure the installation and test of corporate tools in coordination with Central Industrialization Team (CIT)
• Provide operational support to the production group to help rectify problems occurring during UAT/PAT and production process
• Initiate action preventing the occurrence of any non-conformity relating to the product, process and quality system.
• Identify and record any problems relating to the product, process and quality system
• Elaborate and maintain proper Documentation (Procedures, Logs and Specifications) for internal use, customer audit or certification
• Support Personnel training (operators, logistics, customer service) in case of new software tool implementation with new Human Interface design

Requirement:

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

• Bachelor’s Degree in Engineering or Computer Science with an Information Technology or Programming Knowledge
• Project Management Certification will be an added asset
• Green Belt six sigma Certification will be an added asset
• At least 4 years’ related experience in process/manufacturing engineering environment
• Experience in leading industrialization project and new process implementation
• Experience in Visual Basic, SQL, and Access is required. Knowledge of other programming languages, Oracle and OS/2 is an asset
• Good interpersonal and communication skills to communicate with customers and different levels within Thales
• Possess initiative to handle improvement and upgrading activities
• Work well in fast paced environment
• Able to work under minimal supervision
• Able to work in multicultural environment

Eigen is a startup in renewable energy. We are a systems integrator focused on providing clean energy to all customers, and their end-users, and are equally as dedicated to supporting our employees and value what makes each individual different, and encourage them to act on their ideas.

We are looking for a Project Engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality.

The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

Responsibilities:

• Preparing, scheduling, coordinating, and monitoring assigned engineering projects
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team
• Interacting with clients, interpreting their needs and requirements, and representing them in the field
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status
• Cooperating and communicating with the Project Manager and other project participants and collaborating to create more efficient project methods and to maintain the project's profitability
• Reviewing the engineering tasks and initiating the necessary corrective actions
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications

Requirements:

• Degree in Engineering, Renewable Energy or a related field
• Experience in solar systems integration
• Experience in Microsoft Office and Autocad (PVSyst software experienced preferred)
• The ability to work with multiple discipline projects.
• Excellent project management and supervision skills
• Excellent organizational, time management, leadership, and decision-making skills

Good to have:

• Certifications in WSH safety courses such as Working at Heights, Workplace Safety and Health in Construction is an added advantage
• Knowledgeable in applicable codes, policies, standards, and best practices

While skills and experience are important, we place equal importance on a candidate’s resourcefulness, adaptiveness and the ability to prioritise and find solutions appropriate for a situation.

ABOUT AMS

We’re inventing the future, right here, right now, at Thales. We design the critical security solutions of tomorrow by combining the curiosity to explore, the intelligence to question and the vision to create. Together we solve complicated problems by combining our experience in the market with our leading research and development capabilities.

Be part of revolutionising our skies for the future of aerospace. A future where all modes of aircrafts piloted or unpiloted, civilian or military move around our skies safer, more efficiently and sustainably for a greener and more harmonised airspace.

ROLE DESCRIPTION SUMMARY

The Senior Network Engineer is responsible for the provision of network integration activities for the respective project and/or bid activity. The Engineer is a key member of the Hardware Deployment & Integration team that provides:

• Technical and resource supervisory input to Network Integration and Deployment engineering activities

• Skilled input to the Network Integration and Deployment activities within the respective project engineering segment, and

• Assistance to the Integration Group for bid response activities.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Network Engineer, you are accountable for:

For Projects:

· Revise solution architecture drawings and diagrams, cost templates (devis), the List of Supply (LOS) / Bill of Materials (BOM), and interfaces at the start of the project.

· Create and/or update network integration engineer contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

· Define equipment configuration for the ATM solution(s) and coordinate with Hardware Deployment and Integration management for assembly of the ATM system and interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

· Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites.

· Support configuration changes to system platforms in factory and customer sites.

· Attend Design Reviews with customers.

· Provide customer training.

· Identify risks at solution architecture level and propose where possible alternate validated solutions.

· Provide system and networking expertise useful in the design.

· Follow and contribute to the development and enhancement of engineering processes

· For Bids / Tenders:

· Creation and Peer Review system architecture diagrams.

· Creation of the List of Supply (LOS) / Bill of Materials (BOM)

· Creation of Hardware Integration section in the Engineering Department devis.

· Definition of system interfaces.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

Relevant bachelor’s degree or Master Degree

Technical skills

§ Must-have

ü Cisco formal certifications (CCNP, CCNA etc)

ü Good level of knowledge of, and experience with Unix/Linux (Redhat distribution preferred) Operating System

ü Familiarity with a wide range of Computer and Networking hardware (preferably Cisco)

ü Scripting (TCL/TK, Perl, & Shell)

ü Able to work on multiple activities con-currently and effectively self-manage (autonomy)

§ Nice-to-have

ü Work experience in a mission-critical, near real-time environment preferably ATC-related

ü Experience in large and distributed networked computer systems

Interpersonal skills

ü Sense of ownership

ü Team player

ü Verbal and non-verbal communication,

ü Listening skills,

ü Problem solving,

ü Decision-making,

ü assertiveness,

ü patience,

ü empathy

1. Provide technical support to business opportunities.

2. Support to Project-designated product or proposal. Comprehensively coordinate resources, successfully accomplish project POC (Proof of Concept) with significant effectiveness.

3. Prepare project delivery, plan design and review, testing and verification, to ensure that the solution can be stably implemented.

4. With active promotion, projects executed in reasonable process, and delivered with high quality and detail and accurate project materials and deliverables in time.

5. Quickly solve problems in the progress and receive good comment from customers; promptly feedback problems to corresponding departments with advice valuable for effectively improving products and solution;

6. Continuous follow-up on Projects, maintain project delivery record and data sorting; participate in project acceptance test and presentation, and produce project summary report after completion of the project.

7. Collection and Analysis of System and Product Needs, Output of Quality Report, Collection and Analysis of Competing Product, Comprehensive Record of Mid/Large-scale System Implementation.

8. Provide technical support in new product/proposal introduction, material output of product technology, material output of product promotion, marketing activity support.

9. In charge of Planning and Implementation of Customer/User Training

Responsibilities:

1. Responsible for technical support;

2. Write product solutions and responsible for inquires of technical parts of related products.

Requirements:

1. At least Polytechnic or Bachelor’s degree in engineering, telecommunication or computer science related.

2. At least 1 year experience of technical support in IT/CCTV/telecom related industry;

3. Good communication skills and sense of customer-focus, fluent in English and Mandarin preferred as role requires candidate to deal with Mandarin speaking clients.

ROLE:
A*STAR-IME is leading the way in establishing industry first 200mm open Silicon Carbide (SiC) R&D program. The program specific focus is on advancing 200mm SiC technologies in key areas such as epitaxy, gate stack, ion implantation, and dry etching, and integrating these modules to fabricate high-performance power devices. Our objective is to drive innovation in power device research, particularly in power MOSFETs rated above 1.2KV. Developing key innovative process is crucial for creating high-performance devices that will contribute to advancements in automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. This role involve growing leadership into ion implantation processes for p-body, channel, guard ring, source contact, and other components. We are currently seeking such individual with ~5 years of experience in ion implantation. The chosen candidate will be responsible for independently supervising ion implantation processes, conducting ion implant simulations, possessing knowledge of crystallography and ion interaction with atoms, having strong understanding of implanters and related thermal processing physics, beam optics, dosimetry systems, and vacuum technology. The ideal candidate should also be willing to collaborate with various departments, the technology development group, and customers. Furthermore, the candidate will contribute to the wide-bandgap team by sharing the ion implantation expertise on compound semiconductor materials and collaborate with other departments working with Si-based technology. The candidate will also be groomed to lead this diffusion process module group of ~6 headcounts into the future.

RESPONSIBILITIES:

• Diagnose malfunctions and using test equipment & software to test faulty tool; applying knowledge of the functional operation of the ion implant equipment

• Support on-site ion implanters in creating, running & characterizing recipes for recipe validation and develop process to achieve the desired dopant profile with excellent
damage recovery.

• Collaborate with vendors to optimize equipment performance and reduce tool downtime

• Analyze data related to implant-related defects formation with quantification and defects minimizations strategy

• Examine work-orders and communicates with equipment operators to resolve equipment problems & determine mechanical and human errors contributed to the issues

• Perform scheduled preventive maintenance tasks with tool operators, especially in checking, cleaning, repairing, detecting and preventing problems

• Responsible for designing experiments for ion implantation at various dose, energy, tilt, and twist levels

REQUIREMENTS:

• Ms/PhD Degree in Electrical Engineering or related field

• >3-5 years industrial experience for high power device design and modeling

• Extensive proficiency in medium to high energy/current ion implantation processes, including a comprehensive knowledge of implant equipment, equipment parts, and
troubleshooting techniques to minimize equipment downtime

• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species

• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile

• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors

• Familiarity with essential device properties resulting from ion implantation

• Adept at mentoring and transferring knowledge to junior staff members

ROLE:
A*STAR-IME is leading the way in establishing industry first 200mm open Silicon Carbide (SiC) R&D program. The program specific focus is on advancing 200mm SiC technologies in key areas such as epitaxy, gate stack, ion implantation, and dry etching, and integrating these modules to fabricate high-performance power devices. Our objective is to drive innovation in power device research, particularly in power MOSFETs rated above 1.2KV. Developing key innovative process is crucial for creating high-performance devices that will contribute to advancements in automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. This role involve growing leadership into ion implantation processes for p-body, channel, guard ring, source contact, and other components. We are currently seeking such individual with ~5 years of experience in ion implantation. The chosen candidate will be responsible for independently supervising ion implantation processes, conducting ion implant simulations, possessing knowledge of crystallography and ion interaction with atoms, having strong understanding of implanters and related thermal processing physics, beam optics, dosimetry systems, and vacuum technology. The ideal candidate should also be willing to collaborate with various departments, the technology development group, and customers. Furthermore, the candidate will contribute to the wide-bandgap team by sharing the ion implantation expertise on compound semiconductor materials and collaborate with other departments working with Si-based technology. The candidate will also be groomed to lead this diffusion process module group of ~6 headcounts into the future.

RESPONSIBILITIES:

• Diagnose malfunctions and using test equipment & software to test faulty tool; applying knowledge of the functional operation of the ion implant equipment

• Support on-site ion implanters in creating, running & characterizing recipes for recipe validation and develop process to achieve the desired dopant profile with excellent
damage recovery.

• Collaborate with vendors to optimize equipment performance and reduce tool downtime

• Analyze data related to implant-related defects formation with quantification and defects minimizations strategy

• Examine work-orders and communicates with equipment operators to resolve equipment problems & determine mechanical and human errors contributed to the issues

• Perform scheduled preventive maintenance tasks with tool operators, especially in checking, cleaning, repairing, detecting and preventing problems

• Responsible for designing experiments for ion implantation at various dose, energy, tilt, and twist levels

REQUIREMENTS:

• Ms/PhD Degree in Electrical Engineering or related field

• >3-5 years industrial experience for high power device design and modeling

• Extensive proficiency in medium to high energy/current ion implantation processes, including a comprehensive knowledge of implant equipment, equipment parts, and
troubleshooting techniques to minimize equipment downtime

• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species

• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile

• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors

• Familiarity with essential device properties resulting from ion implantation

• Adept at mentoring and transferring knowledge to junior staff members

Responsibilities

• Work with outsourced service providers and product principals to manage the delivery, operations as well as Tech Refresh for Microsoft suite of services:o Microsoft 365 (such as Exchange Online, OneDrive, SharePoint Online,Teams, Viva etc.)

o Dynamics 365 including Power BI, Power Automate and Power Platform

o MS Enterprise Mobility Suite (Intune, MCAS Azure Information Protection)

o Microsoft Entra (configuring and setting up the synchronisation of on-premise AD with

Microsoft Entra ID, federation services)

o Other Microsoft products such as Stream, Telephony services.

• Ensure the operations process and controls are clearly documented and operationalised
• Plan, design and support Technology Refresh and migration activities for the infrastructure services.
• Ensure smooth service delivery and implementation within the business context.
• Understand technical, quality management and security guidelines and policies and ensure operations processes and supporting systems comply with these policies and guidelines.
• Manage infrastructure operations and support and ensure delivery of services meet agreed service levels.
• Propose new solutions to enhance operational efficiency and improvement of infrastructure.
• Other duties as may be delegated by the Manager or Team Lead from time to time.

As a Data Engineer,

Your main responsibilities will include:

• Design, develop, and implement Spark Scala applications and data processing pipelines to process large volumes of structured and unstructured data.
• Integrate Elasticsearch with Spark to enable efficient indexing, querying, and retrieval of data.
• Optimize and tune Spark jobs for performance and scalability, ensuring efficient data processing and indexing in Elasticsearch.
• Collaborate with data engineers, data scientists, and other stakeholders to understand requirements and translate them into technical specifications and solutions.
• Design and deploy data engineering solutions on OpenShift Container Platform (OCP) using containerization and orchestration techniques.
• Optimize data engineering workflows for containerized deployment and efficient resource utilization.

Requirements

• Bachelor's degree in Computer Science, Data Engineering, Information Technology, or a related field.
• At least 4 plus years of experience as a Data Engineer, working with Hadoop, Spark, and data processing technologies in large-scale environments.
• Strong expertise in designing and developing data infrastructure using Hadoop, Spark, and related tools (HDFS, Hive, Ranger, etc)
• Experience with containerization platforms such as OpenShift Container Platform (OCP) and container orchestration using Kubernetes.
• Proficiency in programming languages commonly used in data engineering, such as Spark, Python, Scala, or Java.
• Knowledge of DevOps practices, CI/CD pipelines, and infrastructure automation tools (e.g., Docker, Jenkins, Ansible, BitBucket)

IT Engineer's Job Description

• Monitoring, support, and maintenance and documentation of the CIM systems
• Design, develop, maintenance and continuous improvements of assigned CIM applications and components
• Provide Level 2 & 3 supports for the proper operation of Production lines

IT Engineer's Requirements:

• Degree in Computer Science, Computer Engineering or related fields. Diploma with relevant experience will be considered
• Min 2 years of experience CIM with High Automation, MES and SECS/GEMS
• Knowledge of basic SQL in Oracle and Java
• Experience in Tibco (TIB / RV) / high technology manufacturing environment is an advantage
• A good team player with good communication skills and able to work independently

We are looking for DevOps Engineer and your role is defined as

Roles & Responsibilities

• Developing and maintaining the entire DevOps pipelines.
• Coordinate with the stakeholders from requirements gathering until successful implementation DevOps pipeline on boarding.
• Work with the vendors and for internal platforms to setup centralized DevOps solutions considering market best practice, Industry standard and ease of support.
• Work with the vendors and for internal platforms to upgrade the DevOps tools farm and integrating with tools.
• Lead analysis and resolution of root cause for Test Orchestration / Environment related issues

Technical Skills

• Deep technical background, with hands-on experience in supporting CI/CD pipelines (Bitbucket, Jenkins, Artifactory, Sonar, Veracode for SAST, JIRA and Confluence).
• Hands on experience building CI/CD pipelines orchestration by Jenkins, GitLab CI, GitHub Actions or similar tools is a must-have.
• Good Experience on OpenShift or AWS
• Prior technical background in different build and branching strategies
• Good knowledge on maintaining/deploying secrets in Kubernetes.
• Prior working experience in setting up Jira workflow.
• Strong hands-on experience on Shell or Groovy scripting.
• Prior experience is customizing JIRA and Setting up confluence spaces.
• Prior hand-on experience in setting up CI/CD pipeline as a centralized solution.
• Hand on experience in setting up DevOps governance, Security standards and audit requirements.
• Prior experience in setting up DevOps pipeline in internal and external cloud offerings.
• Experience with continuous testing, techniques and tools (Junit, Sonar Cube, Veracode etc.)
• Technical exposure of automation accomplished with advanced Python, Chef, Ruby and PowerShell

DESCRIPTION

• Bid preparation and project execution for floating offshore ammonia and hydrogen production projects, FAPSO & OSS.
• Undertake FAPSO topside Electrical engineering design to comply with the client’s requirements.
• Participate in vendor development for auxiliary distribution, telecom, high voltage equipment.

DUTIES AND RESPONSIBILITIES

• Support senior engineers and project managers in delivering sound engineering solutions.
• Development of Basis of Design for Electrical discipline.
• Development of load list, single line diagrams, specifications and other documents as required for execution of the project.
• Ensure that technical compliance with all design requirements.
• Use engineering software for modelling and analysis.
• Produce technical documents, reports and presentations detailing the findings of investigations under the guidance of Project Engineer or Engineering Manager.
• Coordinate with Engineering Contractor, Shipyard and Supplier Electrical discipline team to review the deliverables.
• Field engineering support during construction phase of the project.
• Commissioning and start-up support.
• Achieve safety standards as defined in project requirements
• Assist in preparation for bid submission to client, with compliant technical documentation.
• Assist in preparation for request for quotations, and evaluation of bids submitted by Suppliers.
• Attend technical meetings, and minutes down the meeting, if required.
• Keep track of relevant discipline tasks.
• Comply with environmental impact assessment and safety-related design requirements.
• Documentation in accordance with Company’s quality management system.
• Responsible for personal safety, safe working practices, and understand and follow HSE procedures.
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Bachelor or Master of Engineering Degree (Electrical or related disciplines).
• 0 – 2 years’ experience. Knowledge or experience in maritime and offshore services will be advantageous.
• Aptitude and attitude to learn and experience marine engineering requirements, software tools, and other technical issues.
• Working knowledge of Microsoft Word and Excel are required.
• Previous use of AutoCAD or other 2D / 3D software will be advantageous.

PROFESSIONAL DEVELOPMENT

• Receive on-the-job training and mentorship from experienced engineers to develop your skills and knowledge.
• Opportunities for career advancement as you gain experience and demonstrate your abilities.
• Support for obtaining professional certifications.

Only Singaporeans & PRs need apply.

About US

UTEC was first established in Singapore on 9 December 2014 and we specializes in civil and tunnel infrastructure construction works, with projects based locally and throughout Asia Pacific. The Company draws on the skills and expertise of its people to deliver tailored underground engineering solutions, striving to provide the best engineering solution and economics to its client. Since its establishment as a Contractor in underground works, the Company has been involved in projects not only in Singapore, but as far as India as well.

OUR VISION

Providing innovative, cost effective & sustainable solutions to underground works, bringing the best engineering solutions to our clients and all the stakeholders.

About This Role

1) Responsible for Estimating, Planning, Scheduling, Coordinating and Supervision to Setting-up, Installing & Maintenance of Following Equipment.

• TBM (Tunnel Boring Machine)
• STP (Slurry Treatment Plant)
• ECM
• Air Supply System
• Batching Plant
• Tunnel Ventilation System
• Temporary Communication System (RFID, Telephone, Fire Fighting, Gas Detector) Installation and Maintenance
• Locomotive
• Chiller Plant
• Gantry Crane
• Dewatering System
• Water Cooling Tower
• 22KV Sub-station

2) Responsible for Writing of Power ON Documents for TBM (Tunnel Boring Machine) and 22Kv Sub-station.

3) Planning of Power Distribution System for Bored Tunnel & Entire Site.

4) Maintenance and Troubleshooting of TBM, Electrical System, Locomotives, Batching Plant, Cooling Towers, and other Tunnel Facilities.

5) Estimation and Ordering Electrical Equipment, Spare Parts Based on Required Specification.

6) Preparation for TBM Initial Drive and Main Drive.

*This role is on 5.5 days workweek and work location is currently located at the East of Singapore (Changi area).

*More details of the role, company and benefit will be shared during the interview for shortlisted candidate.

These are our Featured Projects that we are Proud to show you:

SINGAPORE

1) PUB – Deep Tunnel Sewage System Contract T-11,

2) LTA – Thomson Line T206

OVERSEAS

1) INDIA - Mumbai Metro Line 3 – UGC07

2) MALAYSIA - Prasarana Malaysia Bhd – LRT3

3) HONG KONG - CEDD – Kai Tak Development Stage 3B

AND MORE ARE ONGOING AND COMING!

Job Summary

Responsible for the execution of process design involving preparation of calculations and review of process design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities

• Lead a process team to carry out process design engineering work in feasibility studies, Front End Engineering Design (FEED) and detail engineering design.
• Act as Key Person to execute tender preparation, actual EPC/EPCm project execution.
• Generate project specifications, design philosophy, PFDs, P&IDs, calculations, operation manuals to comply with clients’ requirement.
• Carry out process simulations and develop heat and material balances.
• Carry out process design for reactors, columns, drums, heat exchangers, tanks and develop respective process datasheets.
• Carry out hydraulic design for pumps, compressors, blowers and develop respective process datasheets.
• Conduct and/or attend P&ID design reviews, HAZOP, IPF, SIL studies, 3D model reviews.
• Check design outputs, datasheets and drawings prepared by Process Engineers to ensure accuracy and completeness to design requirements and concepts.
• Support construction and commissioning activities at site.
• Coordinate with client, Project Team and other engineering departments and vendors.
• Monitor manhours and schedule for Process work and deliverables.
• Perform other functions that may be assigned by Department Manager.

Requirements

• Bachelor’s degree in Chemical Engineering.
• Minimum 10 years’ of experience.

Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good knowledge in PRO/II, HYSYS, HTRI, AUTOCAD and Microsoft Office.
• Possess good communication and technical skills.
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports, international codes and standards.

Interested parties, please send in your detailed resume.

As aSoftware Engineer, you are accountable for:

· Be part of the Security Development team to build innovative Security solutions for Homeland Security, Smart Cities and Critical Infrastructures.

· Be responsible for the technical/solution designs, code development, and component test execution to demonstrate alignment to the product/functional specification of the solution.

· Develop and demonstrate a broad set of technology skills in web application technologies, micro service design patterns, Open Source libraries and frameworks, and technology architecture concepts.

· Collaborate with product/solution architects to create, implement and maintain the product/solution development roadmap.

· Be the main contact point to represent the team, join agile ceremonies and communicate effectively with other development teams and product management team.

· Ensure all work adheres to Thales software development methodologies and processes

· Thoroughly document design to ensure the usability, supportability and maintainability of the developed

· Perform sub-system installation, configuration and integration to support Proof-Of-Concept (POC)/demo.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Experience required:

· 3+ years of hands-on experience of full web application development lifecycle of scalable micro-services-based architectures; including tools, best practices, continuous deployment, dependency/complexity management, scale/performance tuning, monitoring, resiliency, etc.

· Experience in SCRUM/Agile software development methodologies

· Strong knowledge of architectural styles and design patterns is good-to-have

Programming languages/frameworks/Technologies:

· Proficiency in Go Language, various Go frameworks and tools

· Proficiency in building responsive layouts with CSS and HTML5

· Proficiency in building complex Angular applications with Typescript

· Experience with Android (Kotlin)

· Familiar with database technologies such as Postgresql and ClickHouse

· Familiar with MQ and Apache Kafka

· Unit-test code for robustness, including edge cases, usability, and general reliability

· Strong knowledge in version control using GIT

· Maintain the CI/CD pipeline and familiar with Kubernetes. Knowledge about Ansible is good-to-have.

· Knowledge about Mapbox SDK (Android or iOS) is good-to-have.

Behaviour:

· Good communication skills and team-works

· Analytical and problem-solving skills