Roles & responsibilities

1. Coordination with Construction team/ Design Consultant/PE/construction subcontractor, etc. for Detail Design Development.

2. Carry out detailed analysis and design of civil, structural, and geotechnical works.

3. Prepare design calculation reports and structural drawings for authorities' submissions.

4. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, shop drawing development.

5. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, Strutting, decking, etc.

6. Check/Rectification of all the structural drawing/ shop drawing if required.

Requirements and relevant experience are as below;

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline from a recognized Institution.

2. Strong engineering fundamental and analytical skills in geotechnical and structural analysis and design works is an advantage.

3. Good knowledge of the application of design and drafting software.

4. Minimum 5 years of experience in Civil and Structural Engineering especially for LTA Project.

5. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure.

6. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

7. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards.

* Candidates who has experience as CS engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/Construction Subcontractor, etc. for Detail Design Development.

2. Review Structural Analysis and Calculation carried out by design consultant and develop simple structural calculation for temp. works

3. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, Shop drawing development.

4. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, and Strutting etc.

5. Check/Rectification of all the structural drawing/shop drawing if required.

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline;

2. Minimum 3 years of experience in Civil and Structural Engineering especially for LTA Project

3. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as CS Engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

You will be a key contributor to our AWS Cloud migration project, responsible for designing, developing, and optimizing applications for the cloud environment. Your extensive experience in application development Java and expertise in AWS Cloud services will be crucial in ensuring the success of our transformative project.

• Design and develop robust and scalable applications using modern development languages and frameworks.
• Collaborate with cross-functional teams to migrate existing applications to the AWS Cloud platform.
• Deep understanding of Java based applications, cloud computing and modern DevOps practices.
• Optimize applications for cloud-native architecture and leverage AWS services for enhanced functionality.
• Identify and address performance bottlenecks in applications, ensuring optimal performance in the cloud environment.
• Conduct regular code reviews to ensure adherence to coding standards and best practices.
• Monitor and optimise applications in the cloud, ensuring they meet performance, security, and compliance standards.
• Degree in Computer Science, Computer Engineering or equivalent.
• At least 5 years of experience in Java development (Java 8 and above, J2EE, EJB, Spring Framework, etc.,)
• Knowledge of and Spring framework, specifically in Spring Boot, Spring MVC, Spring Security, Spring AOP, and API integration with SOAP and RESTful webservices
• Knowledge in JAXB and Java Security API
• Experience with application deployment in WebLogic Server, including administration and configuration for managed servers, data sources and JMS persistence stores
• Familiarity with database integration to Oracle DB and PostgreSQL using Spring Data JPA, Hibernate, JDBC
• Experience in installing and configuration of 12c WebLogic server.
• Experience in deploying batch jobs in WebLogic server.
• Knowledge on asynchronous messaging queues
• Knowledge in Ehcache
• Knowledge in unit testing with JUnit
• Knowledge in building and version control with Git, Gradle, Apache Ant
• Hands-on experience with AWS Cloud-native services (e.g. EC2, S3, Lambda, SQS, RDS, Kubernates, API Gateway.)
• Hands-on experience with CI/CD tools like Jenkins, GitLab CI, Bamboo or Circle CI
• Familiarity with IaC tools like Terraform or CloudFormation
• Experience with application deployment and managing of RH JBoss EAP Server and IBM WebSphere

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible to support and contribute in driving best-in-class yield and defectivity performance.

Key Responsibilities :

• New/mass production yield analysis and improvement
• Product yield abnormalities systematic analysis and solutioning
• Work with modules, Integration & QRA, etc to solve product technical issues
• Product yield target goal setting and forecast
• Participate in new process development and production ramp
• Product yield improvement and related customer request support
• Wafer return electrical and physical failure analysis.

Education Qualification & Essential Experiences:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics /Material Engineering or Physics science.
• Interesting or Min 1 years of relevant work experience in modules/Process Integration/Product Engineering would be plus.
• Possess strong analytical skills, usage experience in ACEXP / JMP /Minitab

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

OTSAW Digital is seeking creative, energetic well-rounded Product Development Engineer to work in the field of autonomous robot technology.

You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots.

At OTSAW Digital, we want people with passion. We want innovators. We want people who can collaborate and bring us a creative future. So, if you are passionate about working in a startup, want to solve hard problems and make cool robots with us, please apply.

Responsibilities:

• Oversee and in charge of technical matters (both Software and Hardware) for assigned product line.
• Support Commercial Team in technical evaluation of new projects requirement, translating customer needs into product design and development requirements.
• Conceptualize and prototype new product ideas.
• Design and conduct validation test for new product functions, features.
• Fine-tuning product designs until they are ready for production.
• Delivering product specifications and procedures to the manufacturing team for production purposes.
• Delivering product specifications to the commercial team for sales purposes.
• In charge of troubleshooting and correction for technical issues escalated to R&D department.
• Coordinate and manage Development projects for assigned product line.

Requirements:

• 2-3 years working experience in relevant fields.
• Min. education qualification: Bachelor Degree in Robotics Engineer, Mechatronics, Computer Engineer, Electrical Engineer, Mechanical Engineer or other Engineering related course
• Strong foundation in Electrical, Mechanical and Software System are preferred
• Demonstrate deep interest & understanding in relevant domain of interest
• Experience in developing on actual physical robot is a plus
• Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus

Job Responsibilities:

• Design review and manage for the geotechnical works such as ERSS, piling, ground improvement, slope and etc.
• To assess, analyze and design slopes for various civil engineering projects.
• Prepare slope stability assessments, reports and design drawings.
• Collaborate with project teams to integrate slope design into overall project plans.
• Provide technical support during construction phases to ensure design integrity.
• Plan and coordinate with clients or authorized party for inspection work on site.
• Carry out structure inspection to existing building structure or infrastructure to identify defects and repair required.
• Report the outcome of the inspection to the QP and prepare inspection reports in designated format.
• Liaison with Authorities (BVA, PUB, URA etc) on submissions.
• Verify claims from sub-contractors.
• Track progress of work for each project and submit progress payment claim to clients on regular basis.

Job Requirements:

• Bachelor’s degree in Civil Engineering or equivalent.
• Minimum 2 years’ experience in civil engineering industry.
• Proficiency in slope stability software and geotechnical engineering tools.
• Strong analytical and problem solving skills.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

This role requires a highly versatile skill set and you will have opportunities to contribute to all relevant domains. Your responsibilities will include development and enhancing of new and existing products.

Responsibilities:

• Hardware Design, document and develop optimized hardware- PCB Layout and Schematic Capture
• Testing, bug fixing, improving hardware performance
• Create schematic and PCB Library and Bill of Materials
• Preparing plans and documentation to support product through certification/approval
• Assisting on product issues both during production and in-service

Requirements:

• Bachelor's Degree in Electrical or Electronics Engineering preferred
• Minimum 5 years of experience in Hardware Design, Validation, & Optimization
• Proven Experience in High Speed Digital board design with experience in interfacing bus standards like DDR3/4/ LVDS/MIPI/PCIe etc.
• Analog Circuit Design & Simulation
• Experience in developing complex CPU and microcontroller-based system
• Experience in dealing with regulatory requirements such as FCC/CE
• Experience in Design Tools (Altium Designer, Pads logic and layout, Allegro or OrCAD, Microsoft Office package, JIRA, VHDL, Linux)
• Ability to work in a dynamic environment with good communication and interpersonal skills

JOB DESCRIPTION

We are looking for a highly-motivated research engineer to work on exciting projects in Cybersecurity (AI for Cybersecurity). Need Strong programming skills and familiarity with Cybersecurity and Artificial Intelligence.

Successful candidates will have the opportunity to work with a world-class interdisciplinary team comprising malware, networking, cybersecurity, machine learning, and deep learning experts. Research engineers will also work closely with industry partners and interact with them to understand their real-world needs. The successful candidate will also engage in project scoping with industry companies to develop a solution to address cybersecurity enterprise application needs.

We are looking for candidates with the following key soft attributes:

• Ability to learn
• Willingness to learn
• Strong interest in AI for Cybersecurity

JOB REQUIREMENT

· Bachelor or Master degree in Computer Science, Computer Engineering, Information Technology or related fields

· Knowledge or experience in cyber security, network security, system security using Artificial Intelligence.

· 2-3 Years of working experience in related research areas is a plus.

· Proficient in C/C++, Java, or Python.

· Experience in research- or application-oriented environments is a plus.

· Ability to work independently, as well as in teams, highly desired.

· Good team player with both research and engineering ethics.

· Good interpersonal skills and communication skills for proposals, reports, and publications.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:-

• Handle second level of issues escalation from IT Support Officer.
• Develop, maintain, and enhance the services of e-portal.
• Maintain HR server, finger print devices.
• Maintain server for Dormitory Management System.
• Maintain Active Directory, file server, FTP, backup server.
• Network monitoring.
• Setup and maintain wireless devices.
• Monitor and maintain DNS, DHCP, VLAN, Proxy Server.
• Monitor and maintain spam.
• Monitor and maintain print server, fax server.
• Monitor and maintain manage switches and network appliances
• Develop, maintain, and enhance the existing PHP program.
• Ad-hoc job or project.

Job Requirements:-

• Diploma in Information Technology
• Good knowledge in computer hardware, software, networking
• Good knowledge in Windows, PHP, Java script, and SQL
• Well-versed with the operation of firewall/VPN, Anti-virus, Anti-Spam, Intrusion Detection
• Ability in administering, maintaining, optimizing windows active directory system security
• Ability to configure and set-up new server
• Strong trouble shooting and analytical skill
• Self-motivated, self-discipline, willing to learn and able to work independently
• Ability to work under pressure
• Service focused, positive with good patience

Additional Notes:-

• 5 days work week
• Company transport pick up at Clementi/Jurong East/Choa Chu Kang MRT Station

Interested candidates, please apply here with your detailed resume stating current and expected remuneration, reasons for leaving previous employment and date of availability to commence work.

We regret that only shortlisted candidates will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Summary

Responsible for the analysis and preparation of specifications and construction drawings, design documents for process and industrial plants in accordance with project specification schedule and customer requirements.

Duties & Responsibilities

• Responsible for field instrument and control system design work.
• Able to lead small/medium size project within budgeted MH, cost and project schedule.
• Prepare and review field instruments, Analyzer, Control Systems (DCS, ESD, F&G etc) specification, requisition, TBE, vendor document review.
• Prepare and review construction drawings such as Index, IO List, Location layout, hook-up, cable routing, loop diagram etc. based on project specifications.
• Evaluate and select suitable instruments for required process control/monitoring application.
• Lead the estimation work of BMBQ, Man-hour, technical proposal writeup, for new tender project.
• Preparation of project monthly report and attending project & client meeting as required.
• Work collaboration with other GEC and monitor daily job task assignment.
• Perform FAT/inspection for control system and field instruments as required.
• Perform SAT, Loop check, site construction and commissioning support as required.

Requirements

• Bachelor’s degree in Chemical Engineering, Electrical and Electronic Engineering or Instrument and Control Engineering.
• 15 years’ experience in instrument and control system design work.
• Knowledge and experience in Field Instrument Engineering as well as Control System, e.g. DCS, ESD, F&G.
• Able to work at construction site to support construction, pre-commissioning and commissioning activities.
• Good interpersonal and communication.

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
• Maintain Equipment capability for production and meet production demand
• Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
• Engage in Equipment troubleshooting and production quality improvement.
• Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
• Well verse in problem solving skills
• At least 6 years experience in semiconductor foundry related field
• Posses analytical tools such as FMEA and SPC concept is required
• Able to conduct and complete cross department projects.
• Experienced in leading a small group of people to meet production demands.
• Able to commit day / night shift work

Mission Summary:

As part of our mapping team, you'll collaborate with world-class experts in mapping, software engineering, and machine learning to build cutting-edge, next-generation mapping systems. We’re leveraging the latest technologies to lead the industry in mapping innovation, and we’re seeking passionate engineers who are excited about mapping, autonomous vehicles, and tackling intellectual challenges. This is an exceptional opportunity to contribute to the growth of a company at the forefront of the autonomous vehicle revolution.

What You’ll Be Doing:

• Tackle complex challenges in large-scale mapping by applying state-of-the-art methods and technologies.
• Develop high-quality, scalable software using Python, C++, and other advanced technologies.
• Work with large-scale, diverse data from various sources, including vehicle sensors and geospatial data.
• Mentor and support software engineers and domain experts, fostering their professional growth.
• Collaborate with cross-functional teams, including both technical and non-technical stakeholders, on challenging and impactful projects.

What We Are Looking For:

• Master’s or PhD in Computer Science, Robotics, or a related field.
• 3+ years of experience in state estimation and SLAM, particularly in cutting-edge visual and visual-inertial SLAM techniques.
• Proficient in C++ or Python.
• Strong foundation in nonlinear optimization and numerical linear algebra.
• Excellent communication and collaboration skills to work across teams of researchers and engineers.
• A passion for problem-solving and a keen ability to learn and adapt.

Bonus Points (not required, but a plus):

• Experience applying machine learning techniques to mapping or geospatial problems.
• Familiarity with distributed computing and cloud systems.

Job Purpose

• Support and contribute in driving best-in-class yield and defectivity performance

Job Description:

• New/mass production yield analysis and improvement
• Product yield abnormalities systematic analysis and solutioning
• Work with modules, Integration & QRA, etc to solve product technical issues
• Product yield target goal setting and forecast
• Participate in new process development and production ramp
• Product yield improvement and related customer request support
• Wafer return electrical and physical failure analysis

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Min 5 years of relevant work experience in modules/Process Integration/Product Engineering
• Possess strong analytical skills, usage experience in ACEXP / JMP /Minitab
• An excellent team player with good interpersonal, communication and written skills
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Ensure all monitoring system of the building management faciities are in good operating condition (error free) and feedback on all alarms and errors generated form BMS.
• Perform scheduling of facilities and building management services to facilitate events and arising requirement.
• Reporting and compilation of daily, feedback, building management facilities faults and activities.
• Operate the plant at the most efficient operating condition and ensure all abnormities are reported for corrective actions
• Validate all facilities & Building management maintenance work carried out by the contractors and ensure compliance to the prescribed standards
• Perform routine building management facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, ACMV outages.
• Analyse data and identify trends with facility issues to determine root cause and take appropriate action.
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects M&E operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 activities to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Maintain compliance with local workplace safety & health (WSH) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP) and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participates in the building management maintenance of all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Participates in cross functional coordination

• Higher Nitec / Diploma / Degree in Mechanical or equivalent.
• Minimum 3 years' of practical electrical and mechanical engineering experience in managing and implementing electrical & mechanical systems for critical building management facilities for telecom, broadcast or data centre buildings.
• Respect, Teamwork and Drive.
• Hands on Troubleshooting
• Stay contactable 24 x 7
• Perform rotation Shift duties

Scope:

• First line troubleshooting for equipment related issues
• Manage the scheduled and unscheduled equipment maintenance and Post PM process recovery
• Vendor management (scheduling, quotation, PM/CM report preparation on vendor activities and equipment training)
• Responsible for equipment uptime and liaison with process control team and equipment vendors for resolving escalations and SPC deviation.
• Works with process module development team, process control team and vendor to ensure flawless operations.
• Support internal audits as needed for ISO certification
• Documentation and sustaining of Equipment related SOP (PM/CM SOP, BKM, etc.)
• Conduct technical trainings and disseminate knowhows to teammate

Requirement:

• Bachelor’s Degree or Diploma in Electrical and Electronics, Mechanical, Mechatronics Engineering
• Preferably with minimum 2 years of semiconductor equipment engineering experience (in the domain of Etch, PVD, PECVD) with hands-on equipment troubleshooting experience
• Systematic and logical thinking. Embrace and committed to investigate and resolve issues with root clause analysis, provide and implement engineering solutions. (i.e. RCA, DOE, FMEA, 8D, some programming skills etc) is an advantage
• Candidate must be comfortable to communicate with inter-department at any technical level
• Must be a self-starter, independent and self motivated.

PURPOSE OF THE JOB

The Mechanical/Thermal/Process Engineer will support diverse power and energy consulting projects throughout the Asia region. Further responsibilities would also include assisting in business development and proposal preparation, collaborating with WSP's regional and international experts as needed.

MAIN RESPONSIBILITIES

As a Mechanical Engineer within the Power and Energy Team, your responsibilities will include:

• Supporting Clients during project feasibility studies, appraisals, procurement evaluations, contractor/vendor design reviews, engineering processes, construction, commissioning, and performance testing, and when required, presenting to clients.
• Contributing to preparing design specifications and provide technical advice to clients on various aspects of power plant development, including configuration options, performance evaluation, prime equipment selection, Balance of Plant (BoP) systems and components, reliability and availability analysis, enabling infrastructure, and considerations for project implementation.
• Assisting managing the technical delivery requirements of projects and project execution to ensure they meet established standards and client expectations.
• Assisting in Business Development and Proposal Preparation, collaborating when required with WSP's regional and international experts as required.
• Conducting market analysis, identifying opportunities, and helping to building business cases for new projects and services.

QUALIFICATIONS

• Master/Bachelor of Engineering degree in Mechanical/Chemical engineering.
• 5 to 10 years of experience as a mechanical/process engineer in the power and energy sector, ideally developed within a plant/system design role or professional services/consulting environment.
• Familiar with gas turbines, CC & CHP power plants, or waste-to-energy plants, including key technologies & components and project lifecycle considerations.
• Experience of working with public and private sector clients in the Asia region.
• Experience in managing and developing client relationships, driving sales, and achieving business growth in engineering consulting or a similar technical industry.
• The following are desired:

1. An additional business qualification (e.g., MBA) would be advantageous.
2. Knowledge of, or the ambition to learn and develop, expertise in process systems for generation of biofuels and power plant waste cleaning systems such as flue gas and wastewater treatment.
3. Familiarity with any design software such as Thermoflow’ GTPro, Steam Pro, CFD, PVsys, WAsP, etc., would be advantageous.
4. Proficiency in MS Office.
5. Experience with project management methodologies and project planning software tools such as, Primavera and MS Project.
6. Ability to collaborate and work effectively with cross-functional teams.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible to support and contribute in driving best-in-class yield and defectivity performance.

Key Responsibilities :

• New/mass production yield analysis and improvement
• Product yield abnormalities systematic analysis and solutioning
• Work with modules, Integration & QRA, etc to solve product technical issues
• Product yield target goal setting and forecast
• Participate in new process development and production ramp
• Product yield improvement and related customer request support
• Wafer return electrical and physical failure analysis.

Education Qualification & Essential Experiences:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics /Material Engineering or Physics science.
• Interesting or Min 8 years of relevant work experience in modules/Process Integration/Product Engineering would be plus.
• Possess strong analytical skills, usage experience in ACEXP / JMP /Minitab

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

You will be a member of the quality assurance team under the product design and development pillar. You will be involved in the end-to-end agile development lifecycle for in-house projects starting from UI/ UX Design to Software Development, Cloud Engineering & Operations, DevSecOps, Quality Assurance and Application Security.

Key responsibilities

• Work with the Business Analyst and UI/ UX Designer as they engage the Product Owner and stakeholders for requirements gathering and user research to produce the User Journey Maps and high-fidelity wireframes, which feeds into development sprints
• Prepare test cases for both front and back-end as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described in the product backlog
• Conduct testing for both front and back-end test cases in every development sprint using a myriad of tools such as postman for API testing
• Create, maintain and update test scripts and pipelines for automated testing framework on the selected DevSecOps platform and toolchain i.e. Azure DevOps Center and Katalon
• Develop documentation for quality assurance rules, policies, procedures and guidelines (RPPG) to guide future projects
• Identify best practices and continuous improvement in quality assurance processes

Requirements

• Background in Computer Science, Engineering or related disciplines.
• Highly proficient in quality assurance processes and methodology.
• Technical knowledge and experience working with DevSecOps platforms and toolchains such as Katalon and Selenium is preferred.
• Participated in at least one full software or product development cycle, preferably using Agile Methodology
• Excellent communication skills
• Teamwork and collaboration skills
• Possess critical thinking and problem-solving skills

You may be offered a 2-year contract in the first instance.

Get to know our team:

Our Corporate IT Team within GXS Enterprise Technology Services aims to be a technology leader that provides predictive and seamless experiences to all GXS employees.

We are seeking a talented and experienced IT Systems Engineer to join our IT team. The ideal candidate will be responsible for designing, implementing, and maintaining our company's IT infrastructure. This role involves working closely with other IT professionals and departments to ensure seamless integration and optimal performance of our systems.

Get to know our Roles

As an IT Systems Engineer, you will play a crucial role in ensuring the stability, security, and efficiency of our endpoint devices and supporting Corp IT systems.

You will be responsible for managing and maintaining our endpoint management systems, including SCCM and patch management.

Additionally, you will work with identity provider solution such as JumpCloud and productivity solution such as Google Workspace to ensure seamless user access and device management.

Your scripting knowledge in PowerShell and Bash will be essential in automating tasks and troubleshooting issues. Familiarity with VDI solutions such as Azure Virtual Desktop or Amazon Workspaces will enable you to support our virtual desktop infrastructure.

Furthermore, you will contribute to our DevOps practices, utilizing GitLab CI/CD for continuous integration and deployment, and implementing Infrastructure as Code using tools like Terraform.

Day-to-Day Activities:

• Endpoint Management: Manage endpoints via Software as a Service (SaaS) solutions, such as Jamf, Cisco, JumpCloud, and Automox. Ensure efficient deployment, configuration, and management of endpoint devices.
• Endpoint Deployment and Support: Responsible for endpoint deployment, including software evaluation, testing, deployment, and post-deployment support. Ensure smooth rollout and functionality of new software and hardware.
• Patch and Lifecycle Management: Oversee OS patch management and application lifecycle management. Ensure systems are up-to-date with the latest security patches and software updates, minimizing vulnerabilities.
• Technical Collaboration: Collaborate closely with team members to enhance technical capabilities and service delivery. Foster a culture of knowledge sharing and continuous improvement.
• System Stability and Security: Ensure the stability, security, and scalability of IT systems. Implement best practices to safeguard sensitive banking data and maintain regulatory compliance.
• Performance Monitoring and Issue Resolution: Continuously monitor system performance and proactively address potential issues. Implement preventative measures to minimize downtime and enhance the overall user experience.
• System Optimization: Work collaboratively with software developers and other IT staff to design, optimize, and integrate systems. Ensure seamless interoperability and efficient workflows.
• Documentation: Develop and maintain comprehensive documentation for system configurations, procedures, and processes. Ensure documentation is up-to-date and accessible to relevant stakeholders.
• Backup and Disaster Recovery: Implement and manage robust backup and disaster recovery strategies to protect digital assets. Ensure quick recovery and data integrity in the event of a failure or disaster.
• Technology and Trend Awareness: Stay abreast of emerging digital technologies and industry trends. Leverage new advancements to drive continuous improvement and innovation within the IT infrastructure.
• Technical Support and Mentorship: Provide advanced technical support and mentorship to end-users and IT colleagues. Foster a collaborative environment and promote skill development within the team.
• Security and Compliance: Ensure compliance with digital security policies, procedures, and regulatory requirements. Implement necessary controls and conduct regular audits to maintain a secure environment.

Skills & Qualifications:

• Educational Background: Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Professional Experience: Minimum of 3-5 years of hands-on experience in IT systems engineering or a similar role.
• Cloud Expertise: Demonstrated expertise in cloud platforms, particularly AWS, Azure, or Google Cloud, with a proven track record of managing and deploying cloud-based solutions.
• Windows Deployment: Proficient in Windows image deployment and creation using tools such as Windows Deployment Services (WDS) and/or Assessment and Deployment Kit (ADK).
• MDM Solutions: Extensive experience with Mobile Device Management (MDM) providers like Jamf, Workspace One, Intune, JumpCloud, and Google MDM, ensuring secure and efficient device management.
• OS Management: Advanced knowledge in managing and deploying macOS, iOS, Windows, Android, and Chrome OS environments.
• Scripting and Automation: Strong scripting and automation skills using languages such as Bash, Shell, PowerShell, Python, and Workato to streamline processes and improve efficiency.
• Problem-Solving: Exceptional problem-solving and analytical skills, with the ability to diagnose and resolve complex systems-related issues swiftly.
• Incident Management: Familiarity with change management, incident management, and problem management processes to ensure smooth operations and minimal disruptions.
• Virtual Desktop Infrastructure (VDI): Support and enhance the virtual desktop infrastructure (e.g. Azure Virtual Desktop or Amazon Workspaces).
• Networking: Basic understanding of networking concepts and technologies (e.g., TCP/IP, DNS, DHCP, VLANs), with the ability to diagnose network access issues.
• Adaptability: Strong ability to quickly adapt to new technologies and evolving industry trends.
• Communication: Excellent communication and interpersonal skills, with a collaborative mindset and the ability to work effectively with cross-functional teams.
• Endpoint devices Hardening: Proven experience in hardening endpoints and assets, including secure configuration, vulnerability management, and compliance with financial regulations such as MAS TRMG and best practices such as CIS benchmarks.

Nice to Have:

• Certifications: Relevant certifications such as Microsoft Certified, Azure or AWS Administrator Associate, or other industry-specific certifications, demonstrating a commitment to professional development.
• Infrastructure as Code (IaC): Experience with Infrastructure as Code (IaC) tools such as Terraform or CloudFormation, enabling automated infrastructure management and deployment.
• DevOps Practices: Familiarity with DevOps practices, utilising CI/CD pipelines and tools (e.g., GitLab CI/CD), ensuring streamlined and automated integration and deployment processes.
• IT Security: Understanding of IT security best practices, including identity and access management, encryption, and threat detection, to safeguard digital assets and maintain compliance.

Job Purpose

To take charge as process/product owner role for processes transferred from MF or customers. To deliver KPIs right from process setup, qualification, tapeout, prototype to mass production phase.

Job Description

• To meet key process/product qual milestones set e.g. Tapeouts (NTO/RTO), PRS matching, ERA, WAT/yield matching, HTOL/ESD/Latchup etc
• Co-work with transfer team and Fab modules to deliver robust integrated process to enable a successful production volume ramp from development/pilot stage.
• Key Fab interface role working directly with customers to address their needs, product performance in terms WAT/yield, conference calls and customer audits etc
• Own process FMEA, PCP for processes under your ownership.
• Own SPC and CITs with modules/QA on inline and WAT Cp/Cpk/OOC performances to meet Fab and customer’s index.
• Manage daily ops related logistics in terms of inline/WAT disposition with related parties to enable smooth wafer shipment.
• To co-work with product engineer to perform device/process corner splits to check out product yield window.

Job Requirements

• Bachelor’s Degree preferably in Engineering with semiconductor process or device knowledge
• A minimum of 7 of relevant experience in technology development, product transfer or process integration related scope.
• Good presentation, communication and interpersonal skills
• Independent and adaptable to different culture fast
• Hardworking, adaptable and able to work independently and collaboratively with teams
• Strong leadership and customer managment skills
• Ability to thrive and meet timelines in a fast-paced and dynamic result-driven environment

Responsibilities

• Responsible for maintenance and repairs on the assigned equipment.
• Provide line sustaining supports to manufacturing such as machine conversion, device setup and jig and tool maintenance.
• Perform, update and document equipment preventive maintenance in-accordance to process and equipment specification.
• Support engineering group on device and recipe creation, equipment buy-off, evaluation, qualification and new product introduction.
• Participate and contribute in continuous improvement activities for yield, equipment modification and productivity improvement.
• Any other ad-hoc duties as assigned.

Requirements

• Minimum Diploma in Electrical/ Electronics/ Mechanical / Mechatronics/Material Science or similar discipline
• Minimum 3 years’ relevant experience in semiconductor/LCD/electronics/electrical industry
• Minimum 3 years’ experience in maintenance and troubleshooting of equipment
• Has hands-on experience in handling equipment for any of the following: lithography, wet etch, PVD, or backend.
• Able to work in both day and night rotating shifts, and flexible to work under various shift patterns.

GetGo is Singapore’s largest and fastest growing carsharing platform that enables everyone with the freedom to drive, without the burden of ownership. Our vision is to be APAC’s #1 carsharing platform as we seek to create a mobility ecosystem that's shared and sustainable for all.

As a Software Backend Engineer, you will be an integral part of our engineering team, working on the systems that form the backbone of our mobility solutions. You'll have the opportunity to work on challenging problems, learn from experienced team members, and grow your skills in a fast-paced, innovative environment.

You'll be involved in developing and maintaining services that handle real-time data processing, complex business logic, and integration with various mobility services. Your work will directly impact the efficiency and reliability of our platforms, contributing to solutions that are changing the way people and goods move in urban environments.

We're looking for an engineer who is passionate about backend development, eager to learn and apply new technologies, and committed to writing high-quality code. You should be comfortable collaborating with team members, asking questions, and contributing ideas to improve our systems and processes.

If you're excited about the opportunity to work on cutting-edge mobility solutions and grow your backend development skills in a supportive team environment, we want to hear from you. Join us in building the future of mobility technology and make a real impact on urban transportation systems worldwide.

Day to Day Activities

• Develop and maintain backend services and APIs using C# and Golang
• Implement new features and enhance existing functionality in our mobility platforms
• Write clean, efficient, and testable code
• Participate in the design and implementation of microservices and event-driven architectures
• Collaborate with senior team members on system design and architecture decisions
• Contribute to code reviews and provide constructive feedback to peers
• Work with databases (SQL and NoSQL) to design schemas and optimize queries
• Assist in troubleshooting and resolving production issues
• Participate in agile development processes, including sprint planning and daily stand-ups
• Contribute to the improvement of our development practices and processes
• Collaborate with cross-functional teams to deliver integrated solutions

Who We Are Looking For

• Bachelor's degree in Computer Science, Software Engineering, or a related field
• 2+ years of experience in backend development
• Proficiency in C# or Golang, with a willingness to learn both
• Experience with RESTful API development and microservices architecture
• Familiarity with database technologies (SQL and NoSQL)
• Basic understanding of cloud platforms (AWS, Azure, or GCP) and containerization (Docker)
• Experience with version control systems (e.g., Git)
• Strong problem-solving skills and attention to detail
• Good communication skills and ability to work effectively in a team environment
• Eagerness to learn and adapt to new technologies and methodologies

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

We are looking for a Senior Electrical Engineer on the E&C DG team to work closely with project team, suppliers, Licensed Electrical Workers (LEWs), and the Asset Operation & Management team to ensure the successful design, coordination, and handover of solar projects.

This position requires strong technical expertise in Electrical & Power Engineering, proficiency in industry-specific software, and excellent communication skills to negotiate and influence key stakeholders. The role also involves preparing documentation, managing submissions, and handling ad-hoc technical tasks, requiring a proactive, detail-oriented approach and effective collaboration with other departments and teams across the company.

Responsibilities:

• Design single-line diagrams.
• Liaise with suppliers for the manufacturing of switchboards and PV mounting structures, negotiating design technicality as necessary.
• Coordinate with Professional Engineers (PE), Licensed Electrical Workers (LEW) and Building Licensed Electrical Workers (BLEW) to ensure compliance and quality standards, negotiating design technicality as necessary.
• Execute SAP operations related to project activities.
• Oversee and manage project handover to the Asset Operation & Management team.
• Prepare necessary documentation for Testing & Commissioning (T&C) processes.
• Coordinate and manage procurement of structural and electrical plan drawings.
• Review structural submissions and track client requirements to ensure timely submission.
• Review and finalize layout drawings for solar projects.
• Support ad-hoc tasks, including drawing PV and string layouts and amending project drawings as needed.

Requirements:

• Strong technical expertise and vast experience in Electrical and Power Engineering.
• Proactive, independent, and detail-oriented problem solver with a growth mindset.
• Proficiency in MS Office, AutoCAD, Helioscope, PVsyst, and SketchUp.
• Familiarity with SAP for processing payments.
• Strong interpersonal skills with the ability to communicate persuasively.
• Attend to site issues when required.
• Willingness to work extended hours when required.
• Willingness to build rapport with contractors and suppliers in both formal and informal settings.
• Fluency in Mandarin highly preferred.

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

• Assisting engineers in any related job to meet company and customer expectation and to ensure the engineer is backed up.
• Produce & test programmable logic code (Including Standard Applications/Function Blocks) as per best engineering standards, integration with third party systems, simulations, testing of systems hardware/software with various stakeholders.
• Perform onsite engineering & various service activities at customer premises, including but not limited to testing and commissioning works always ensuring highest work safety practice.
• Produce hardware/software design specifications, SCR's, project documentations such as but not limited to execution plans, quality plans, FAT and SAT procedures, verification and validation plans
• Plan and implement assigned project activities, Functional Safety Management, Cyber Security plans, ensure project execution follow functional safety requirements & company policies.
• Provide technical support, site surveys etc. Liaise with customers, suppliers, partners, project team and project manager on technical & engineering aspects.