SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

Duties to Be Performed:

The Senior Chemical Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The Senior Chemical Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Job / Skills Requirement:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

1. Assist Project Manager on Engineering efforts in technical projects at Semiconductor fabs in Singapore and occasional overseas.
2. Provide on-site engineering equipment start-ups, mechanical parts installation, trouble-shooting and maintenance support.
3. Acts as a Technical Resources in performing repair of Electro-mechanical Assemblies
4. Facilitates continuous improvement project that add value to customer.

Requirement

At least 1-2 years experience in Semi-Conductor Field

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

· Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international

· Provide high level technical support to external customers at their location

· Provide on-­site training to the customers

· Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales

· Develop Service technical documentation

· Create, develop, and continuously improve the customer support & applications knowledge database

· Timely and professionally handle field service calls and issues arising from the field service

· Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international

· Visits, triage with field applications scientists as appropriate

· Timely complete and submit all required paperwork

· Flexible schedule to accommodate our customer’s needs

· Effectively handle multiple priorities, organize workload, and meet deadlines

· Communicate with the customer to ensure satisfaction and implement any necessary corrective actions

· Up to 30% traveling required within Southeast Asia (at times with short notice)

· Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

· 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)

· 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

· Pre-sales support

· Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

· Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.

· Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation

· Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.

· AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Bruker is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics.

Job Description & Requirements

Get to know the Role:

• As a Site Reliability Engineer (SRE) you will help build a meaningful engineering discipline, combining software and systems to develop creative engineering solutions to operations problems.
• Much of our support and software development focuses on optimizing existing systems, building infrastructure and reducing work through automation.
• You’ll join a team of curious problem solvers with a diverse set of perspectives who are thinking big and taking risks.
• As an SRE you’ll be focused on running better production applications and systems.
• SRE is a key contributor to core infrastructure and functional development teams throughout the life cycle to help support software for reliability and scale.
• Key areas of focus include automation, application/platform uptime and quality, packaging/distribution techniques, platform design “operability”, analytics, deployment, adoption, and tool development, among others.
• The position will wear many hats from owning day to day health and performance, to identifying incidents/developing remediation plans, to working with open source software and experienced packaging techniques, to working with development teams and contributing to the strategic roadmap and execution.
• Candidates from a variety of software, platform, or automation engineering backgrounds will be considered for this position.

The day-to-day activities:

• Design, code, test and deliver software to automate manual operational work
• Troubleshoot priority incidents, facilitate blameless post-mortems and ensure permanent closure of incidents
• Engage with development team throughout the life cycle to help develop software for reliability and scale, ensuring minimal refactoring or changes
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions
• Perform the L1/L2/L3 support activities for the Production Support project with analysis and design work, including impact of requirements across all system components
• Build and drive adoption for greater self-healing and resiliency patterns
• Design automated software and product upgrades, change management, and release management solutions
• Participate in the 24x7 support coverage as needed

The must haves:

• Bachelor's degree in information systems, information technology, computer science, or similar.
• 1-3+ years professional experience in a software management position.
• Experience with dockers / containers / k8s.
• Direct production operations experience in a cloud environment.
• Experience contributing to technology and product strategy.
• Experience leading capability building initiatives across diverse areas such as infrastructure and operations automation, software quality, delivery automation and other core engineering.
• Demonstrated experience of driving operational efficiency and transparency of a growing engineering organization.

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Bruker offers differentiated, high-value life science and diagnostics systems and solutions in preclinical imaging, clinical phenomics research, proteomics and multiomics, spatial and single-cell biology, functional structural and condensate biology, as well as in clinical microbiology and molecular diagnostics.

Please visit www.bruker.com.

Bruker - Innovation with Integrity.

Bruker Singapore is seeking for an IT Service Engineer based in Singapore. He/ She is responsible for providing technical support and assistance to end-users within an organization. They are tasked with troubleshooting and resolving software and hardware issues, as well as configuring and deploying new hardware and software systems. The ideal candidate for this role should possess excellent problem-solving skills, strong communication skills, and the ability to work both independently and as part of a team. This is a two years contract (subject to renewal).

Areas of Responsibilities :

• Operate the day to day IT Service Desk to our employees through emails and online ticketing system.
• Monitors and track incident, service request in IT ticketing system. Responsible for dispatching and escalating ticket to next support level. Continuous monitoring and forward movement of end user issues until they are resolved.
• Manage and operate the installation/delivery of all End User Device including Desktops, Laptops, Monitors, Phones, Printers and Mobile device.
• Responsible for all PC heath status; ensure all computers are properly patched and virus protected.
• Provide assistance to users regardless of their geographical location.
• Performing any other IT related duties including on-demand project.
• Manage telecommunication system and cabling system. Work with external vendor to ensure smooth operations and SLA are met.
• Prepare and participate in disaster recovery and unscheduled shutdown drills
• Prepare report as request by management.
• Willingness to travel up to 30% in Asia Pacific
• Any other ad-hoc tasks assigned

Preferred experiences and qualifications:

• Minimum Diploma level (preferred) in a Computer Science or equivalent
• ITIL foundation certification highly preferred
• Some working knowledge in an IT Support Organization
• Preferably 1-3 years of related working experience
• Experience in handling different level of end users
• Experience in handling user request and communicate expectation
• Candidates with relevant qualifications are encouraged to apply

Technical Skills:

• Working knowledge of Microsoft Server and Active Directory
• Working knowledge of Microsoft Technology in General
• Working knowledge of Windows Operating System
• Excellent administration and reporting

Personal & Organizational Skills:

• Good problem-solving skills.
• Good communication skills, written and verbally across all levels of the business
• High analytical problem solving and troubleshooting skills
• Excellent task management skills
• Customer service focused
• Language: English – fluently, both written and verbal

Bruker is an equal-opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics.

Certain positions at Bruker require compliance with export control laws and as a result, all interviewed candidates for all positions will be screened pre-interview to determine their eligibility in light of export control restrictions.

ABOUT Defense and Security Engineering Team

Established in Singapore in 1973, Thales Singapore Engineering Team leads and pioneers innovative solutions for the Asia-Pacific region. Our coverage spans across an extensive spectrum of fields, encompassing proven solutions in Defence & Military, Security & Surveillance, Intelligence & Big Data, Secure Radio Communications, to Cybersecurity, Network & Infrastructure Security.

We are at the forefront of cutting-edge technology with a rich legacy in excellence and innovations. With the combined expertise of 2100 staff in Singapore, and over 80,000 professionals across 68 countries, Thales Singapore Engineering Team is the key contributor in keeping Asia-Pacific & the world safe and secure, protecting and changing lives every single step we take.

Along with other departments in Singapore, such as Thales Research & Technology, we engineer state-of-art technological solutions from dreams into reality for the world. If you are ready to make a difference on a global scale, our team is the place for you. Join us today and embark on an extraordinary journey of writing the next chapter of history for a better world.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Application Integrator Engineer, you are accountable for:

· This position requires a deep understanding of

o integration frameworks,

o middleware solutions,

o APIs,

· The ability to troubleshoot complex issues and deliver innovative solutions. With a focus on strategic collaboration and continuous improvement, our ideal candidate is both detail-oriented and forward-thinking

· Guarantee the technical solution for infrastructure & deployment

o System architecture & PaaS implementation

o Define and develop the means so that products are correctly and continuously integrated and deployed in development, quality assurance, and production environments, respecting established rules.

o Support delivery teams with automated tools and scripts to provision infrastructure resources (compute, network & storage) in a simple and efficient manner.

· Secure the product operability

o Understand the functional context of the product up to the point of challenging functional decisions

o Guarantees that the product underlying architecture is state of the art.

o Ensures that operational best practices (supervision/monitoring, backups, archives, log management) are implemented.

· Ensure the software team is informed and aware of operational constraints, and if required trains the team on those topics.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Possess 8 to 10 years of experience in the following:

· Design and implement integration solutions to connect multiple software applications.

o Develop and maintain APIs to facilitate data exchange between systems.

o Collaborate with software developers and IT teams to understand integration requirements.

o Monitor and troubleshoot integration issues to ensure continuous operation.

o Optimize and enhance current integration processes for improved efficiency.

o Document integration processes and maintain up-to-date technical documentation.

· Hands-on experience with message brokers like RabbitMQ or Apache Kafka

· Proficiency in scripting languages such as Python, JavaScript, or Shell scripts

· Familiarity with microservices architecture and containerization tools like Docker and Kubernetes

· Strong understanding of API management and development using REST or SOAP

· System skillset :

o System Administration basic skillset (services, ssh, user management, …)

· DevOps tooling advanced skillset :

o Extensive working experience (at least 3 years) with Containerization: Docker, Kubernetes and Helm

o Using and administrating GitLab CI/CD

o Developing and maintaining Ansible Playbooks and Modules

o Deploying and setup of CI/CD pipelines (closely work with development team to develop CI/CD pipelines and deploy into private and public cloud)

o Scripting experience in Shell (bash or Python) etc

o Using Jira / Confluence

o Code documentation using Markdown

Behaviour:

· Produces Ingenious, astute design, with an open mind

· Excellent communication, presentation and interpersonal skills. Able to fluently communicate with local project team and external stakeholders.

· Collaborative team players preferred

About your role

• Collaborate with senior application engineers and robotics experts to implement robotic software solutions for various industrial applications.
• Assist in configuring robotic systems to meet specific client needs, ensuring optimal performance and functionality.
• Support the integration of robotic hardware, sensors, and software components to create comprehensive industrial automation solutions.
• Participate in the creation of detailed technical documentation, including user manuals, guides, and system specifications.
• Assist in troubleshooting technical issues and providing timely solutions to ensure smooth operation of robotic systems.
• Collaborate with cross-functional teams to gather requirements, provide technical insights, and ensure successful project execution.
• Learn and develop expertise in the company’s proprietary robotic systems and technologies.
• Stay informed about the latest developments in industrial robotics and automation to contribute fresh ideas to projects.
• Adapt and learn quickly to new tools, technologies, and processes as required.

Requirements

• Bachelor's degree in Engineering, Robotics, Computer Science, or a related field.
• Basic understanding of industrial robotics concepts and principles.
• Strong problem-solving skills and an ability to work collaboratively in a team environment.
• Interest in automation, robotics, and industrial applications.
• Good communication skills to effectively share ideas and collaborate with team members.
• Attention to detail and a commitment to producing high-quality work.
• Open to travel overseas for deployments.

Nice to Have

• Familiarity with robotic hardware components and sensors.
• Previous experience with robotic programming or automation projects.
• Understanding of control systems and sensors used in industrial automation.
• Knowledge of CAD software for basic mechanical design tasks.
• Passion for technology, robotics, and innovation.

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil and Environmental Engineering at the National University of Singapore is recruiting a Research Engineer. The successful candidate will work on experiments and numerical modelling of 3D breaking waves and wave-current interaction. The candidate should have strong knowledge background in terms of waves, currents, turbulence, etc. Experience with experiments and CFD model will be advantageous. Only shortlisted applicants will be notified.

Job Requirements

• Possess at least a Masters degree in Civil Engineering with related research experience.
• Candidates with background in fluid mechanics, coastal and ocean engineering, experimental methods are encouraged to apply.
• Strong written and spoken communications.
• Good in quantitative analysis.
• Strong written and spoken communications.
• Good knowledge of CFD analysis and programming skill is an advantage.
• Open to fixed-term contract.

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions.
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges.
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities.
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points.
• Attractive commissions will be awarded.

Requirements

• Experience in robotic engineering and simulation work is preferred.
• Strong understanding of robotics and automation related products.
• High willingness to learn and take ownership.
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals.
• Comfortable with travelling internationally for work.
• Ability to take initiative and self-manage to achieve key objectives and company KPIs.

Responsibilities

1. Classify the received Parts into self-repair/outside-repair/Stage/Scrap/Return and place them on the corresponding racks of each Category, and convert the ePMS Level 1 order into a Level 2 order.
2. Open bidding and repair the Parts to be sent to the manufacturer for repair, and convert the ePMS second-level order into a third-level order and issue a warehouse receipt.
3. Each unit listed on the front of the maintenance will be sent to the Parts for repair, and after completion, the ePMS secondary order will be converted into a closed case and returned to the warehouse
4. FAB Urgent case support : The original factory has no ingredients, or the unit price is very high and the seasoning is urgently needed
5. Track and manage the progress of the repaired items sent by the manufacturer for repair, and control the Parts Repair work for Cycle time; provide USER query
6. Key/Special Component Sourcing (for Parts that are discontinued or unreasonably priced).
7. Parts Sourcing / Replacement Solution for Old Discontinued Machines

Qualifications

1. Possess at least a Bachelor's Degree in Electrical and Electronic Engineering.
2. Minimum 2 years relevant work experience in semiconductor related technology equipment maintenance.
3. Knowledge of Servo control loop will be an advantage.
4. Good communication and interpersonal skills.
5. Able to work independently and able to handle stress effectively.

Please apply here: https://talent.sage.hr/jobs/55729b46-20ca-4792-9df2-360f30fbb5e3

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for Research Software Engineers with the following backgrounds and experience:

- Full-stack Software Development

- Distributed Systems

- Hospital Information Systems and Healthcare Applications

- Cybersecurity and Software Security

- High-performance Computing

- Network/System Administration

As a Research Software Engineer, the successful candidate will contribute to these developments by producing software tools, platforms and libraries as vehicles to carry out impactful research, develop engaging and interactive demonstrators and translate early-stage research prototypes into robust and usable applications.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Engineer (Terminal Operations Maintenance)

As a key member in the Terminal Operations team, you will assist to oversee the maintenance activities of the terminal with specific attention to quality, safety and emergency, compliance with regulatory / insurance / statutory requirements, and other administrative functions, hence, ensures division remains a profit centre for the organisation.

Job Responsibilities:

· Develop and oversee preventive maintenance schedules to ensure fuel storage tanks, pipelines, and associated equipment function optimally.

· Coordinate regular inspections and manage maintenance activities and resources to avoid disruptions in storage operations.

· Ensure the availability of the terminal and equipment is maximised.

· Ensure all maintenance work complies with industry regulations, environmental standards, and safety protocols.

· Conduct risk assessments and implement safety procedures, emergency response plans, and training for team members.

· Coordinate and lead relevant functional stakeholders on diagnostic checks and perform repairs on mechanical, electrical, and control systems associated with storage tanks and fuel distribution.

· Respond swiftly to any issues to minimize downtime and maintain operational efficiency.

· Maintain detailed records of maintenance activities, inspections, and repairs, and prepare reports on facility performance and safety compliance.

· Ensure documentation is current for regulatory audits, inspections, and internal reviews.

· Assist Tank Management leadership in formulating and executing of Tank Management Maintenance Strategy.

· Lead and update the Maintenance Management System of all maintenance master data such as assets master, equipment master, maintenance checklists, maintenance schedules.

· Identify opportunities to improve efficiency and reduce costs, while enhancing the reliability and safety of fuel storage operations.

· Stay updated on industry best practices, new technologies, and regulatory changes to keep maintenance practices current.

· Foster a safety-first culture by providing ongoing training on protocols, equipment usage, and emergency response.

Job Requirements:

All Candidates

• Fresh graduates are welcome to apply.
• Degree or Diploma in Mechanical Engineering or equivalent.
• 2 to 3 years of relevant experience is a plus.
• Demonstrates strong management and leadership qualities, with the ability to work independently and think critically.
• Self-motivated, resourceful, and committed to continuous self-improvement, with strong analytical and communication skills.
• Possesses good working knowledge of safety and statutory requirements.
• Strong analytical and problem-solving skills, with the ability to diagnose and resolve maintenance issues under time-sensitive conditions.
• Available to be on standby after office hours in response to any emergency.

Experienced Candidates

• Prior experience in a supervisory or lead role, especially in maintenance, with proven team coordination and communication skills is advantageous.
• Strong technical aptitude in maintaining and repairing fuel storage systems, including tanks, pumps, valves, and piping.
• Ability to interpret technical drawings, schematics, and manuals related to fuel storage systems.
• Competence in conducting risk assessments, identifying potential hazards, and implementing preventive safety measures.
• Experience in Maintenance, Repair, and Overhaul (MRO) activities.
• Familiar with using maintenance management systems such as Maximo and SAP.

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

The Role:

We invite experienced C++ Software Engineers to apply as Senior Software Engineers with us. We value proactive problem-solvers with expertise in C++, who take ownership of their work and show dedication to ongoing learning and growth.Candidates who are adept at solving complex issues, especially those related to low latency or multi-threaded, are highly regarded at Rapsodo.

Responsibilities:

This role would be expected to:

• Be open to new concepts and ideas, demonstrate professional curiosity, and driven to succeed with a strong sense of ownership as a problem solver.
• Possess strong organizational skills, attention to detail, resilience, and adaptability in a dynamic environment
• Collaborate closely with Rapsodo's internal teams to ensure seamless integration of middleware solutions.
• Coordinate and execute middleware integration tasks across various technology platforms to support the development and deployment of sports data analytics solutions.
• Engage with a diverse range of applications and technologies, contributing to the dynamic and challenging nature of the role.
• Provide Tier IV and higher support for any outstanding technical issues.

Requirements

• Bachelor’s Degree in Computer Engineering or Computer Science-related discipline
• At least 7 years of work experience in a relevant role, with demonstrated prior experience in leading engineers in delivery end-to-end product development projects
• Demonstrate expertise in modern C++ and multithreading concepts, along with fundamental knowledge of Linux and Python / Bash scripting.
• Strong problem-solving skills with the ability to troubleshoot the most challenging technical issues effectively.
• Demonstrate a self-starting attitude with a strong desire to learn and an action-oriented approach
• Excellent teamwork skills and the ability to work cross-functionally.
• A background in Team Sports will be an added advantage!

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

Key Responsibilities:

1. Preventive Maintenance (PM):

• Lead and execute preventive maintenance strategies with technician team for all critical production equipment.
• Monitor equipment performance to identify potential issues and implement solutions to reduce downtime.
• Develop and update PM schedules and ensure compliance with maintenance procedures.

2. Troubleshooting and Major Equipment Downtime:

• Provide technical expertise in diagnosing and troubleshooting complex equipment issues during major breakdowns.
• Lead root cause analysis for equipment failures and implement corrective actions to prevent recurrence.
• Support the repair and maintenance team during critical equipment down situations.

3. Equipment Down Reporting:

• Track and report on equipment downtime, analysing data to identify trends and areas for improvement.
• Prepare detailed reports on equipment failures, downtime reasons, and actions taken to minimize future disruptions.

4. Production Planning Support:

• Assist in production planning by coordinating equipment availability and maintenance schedules to minimize impact on production timelines.
• Collaborate with production teams to optimize equipment usage and throughput.

5. New Material Qualification:

• Work closely with the QC team to qualify new materials and ensure they meet required specifications.
• Coordinate testing and evaluation processes for new materials, providing technical input to ensure compatibility with existing equipment.

6. Work Instructions and Process Improvement:

• Develop, review, and update detailed work instructions, standard operating procedures (SOPs), and maintenance manuals for equipment operation and repair.
• Ensure that work instructions are clear, comprehensive, and easy to follow for both operators and technician team.

7. Spare Parts Management:

• Manage spare parts inventory for critical equipment, ensuring optimal stock levels and fast access to required parts.

8. Machine Improvement & Optimization:

• Continuously evaluate production equipment for potential improvements, such as upgrades or modifications
• Lead initiatives to optimize existing equipment, reduce maintenance costs, and improve overall production efficiency.

Qualifications:

• Preferably with Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.
• 2+ years of experience in engineering roles focused on equipment maintenance, troubleshooting, production support, or similar fields.
• Strong knowledge of preventive maintenance techniques, troubleshooting complex equipment issues, and working with various industrial systems and machinery.
• Proven ability to diagnose and resolve mechanical, electrical, and control system issues
• Ability to manage multiple priorities, coordinate cross-functional teams, and ensure timely completion of equipment improvement projects.
• Strong written and verbal communication skills, with experience in preparing reports, work instructions, and technical documentation.
• Full-time, on-site position located at Tampines.
• Occasional travel to other company sites (East region) may be required.

Responsibilities:

• Carry out structural design and analysis to meet project requirement.
• Prepare design calculations & shop drawings for submission.
• Provide general technical support to the in-house operations team.
• Technical marketing of structural strengthening products.
• Attend meetings with clients for pre and post contract to meet project requirement.
• Accountable for effective co-ordination of projects as assigned.
• Ensure all safety and quality assurance procedures and standards are followed.

Requirements:

• Must possess at least a good Degree in Engineering (Civil) recognised by the Ministry of Manpower, Singapore and is familiar with the British American Design Standards, and Eurocodes.
• Able to perform structural analysis using design software such as STAADPro ETABS, Prokon etc.
• Familiar with AutoCAD application.
• Good command of spoken and written English.
• Possess initiative, analytical thinking abilities and able to work both independently and as a team.
• Possess positive attitude and interpersonal relationship skills.
• Foreigners: Minimum of two years' experience in local consultancy firms will be an advantage.

Summary:

Co-ordinate with respective factory teams including CLS Tech Support, CLS Production, HPE Procurement, Material team, HPE Product Engineering team, Test team etc. to ensure all area of focus are well prepared and ready for factory inspection.

Detailed Description:

Performs tasks such as, but not limited to, the following:

• Prepare product sample for agency inspection.
• Perform internal product compliance audits.
• Verify relevant documentation revision and content.
• Prepare and host Factory tour (Incoming Inspection/Production Lines/Finished Products/Lab/Testing areas) with auditor/HPE representative.
• Coordinate product safety factory inspection with relevant engineers (Test/PE/Procurement) and Production to ensure compliance to applicable HPE standards and product regulatory requirements.
• Pursue Supplier CoC availability by purchased batches as “verification of purchased parts” for critical component materials from relevant Proc Engr (e.g. power supply/ PCB/ plastic materials/ batteries/labels) that is requested by the agency auditor.
• Traceability of manufacturer and flame rating for incoming material e.g. plastic material/PCB used in products.
• Keep in touch with relevant Global Product Regulatory team to track and understand the updates to requirements.
• Report any regulatory changes/escalation to management and inform applicable departments.
• Track and maintain the latest version certificates and test reports from the certification body.
• Ensures that the processes are carried out and comply with the specifications required by customers and that it complies with the local requirements of the organization and the requirements of MPS (Manufacturing Process Standards)
• Ensures that the specifications, the acceptance criteria of the products by the operational staff are known and respected; ensures that operators comply with product quality inspection procedures in accordance with customer requirements
• Provides support in order to optimize processes, identifies and initiates opportunities to reduce costs
• Prepares and collects data from the key points of the processes and prepares the internal quality reports
• Monitors product yields, process (yield) and scrap rate (scrap) or other quality indicators
• Participates in the activities of PFMEA, 8D analysis and elaboration of Control Plan
• Assesses and updates working instructions for specific products

Requirements:

• Bachelor's Degree in relevant fields
• 4 to 6 years relevant experience
• Strong knowledge in manufacturing operations Understand quality tools such as FMEA, PMP, SPC, 8D methodology, etc
• Good understanding and familiarity with safety regulations such as UL, CSA, TUV, CCC and standards (60950-1, 62368-1), China standard GB 4943.1, GB 9254.1, GB 17625.1
• Good understanding in ISO 9001:2015 Quality Management System (Certified ISO Internal Auditor Preferred)
• Attention to Detail: Strong attention to detail is crucial for identifying potential safety issues.
• Team Collaboration: Ability to work effectively with cross-functional teams, including design, manufacturing, and quality assurance.
• Technical Knowledge: Understanding of product design, materials, and manufacturing processes, as well as quality and process improvements techniques and tools.
• Problem-Solving Skills: Strong analytical skills to identify potential safety issues and develop solutions.
• Communication: Excellent verbal and written communication skills for reporting and training, effectively communicate with a wide variety of internal and external customers teamwork skills;

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description & Requirements:

• Review of Civil & Structural working drawings and shop drawings in connection with SEM and steel structure shop drawings during pre-construction phase to prepare construction methods, identifying risks to promote strategies and alternative methodologies to mitigate.
• Organizing regular meetings with the sub-contractor's technical teams to resolve technical problems in pre-construction and construction phase.
• Working closely with Design team and LTA/QPS (client) to resolve execution issues with appropriate functional proposals with an aid of presentation or sketches.
• Preparing method statement for construction working including RA and SWP.
• Prepare of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspection with QP.
• Reviewing of rebar BBS prepared by sub-con in compliance with standards and shop drawings roof slabs, steel structures and corbel details for precast installation.
• Site Supervision of construction of structures such as pile cap, undergrounds tanks, base slab, column (~12m high) including corbel, RC beams, Capping beam, RC and PC beam connections, ramps, steel and RC struts, hanging sumps and staircases.
• Reviewing and site supervision of surface water drain and waterproofing shop drawings and site work.
• Assisting construction manager for planning and preparing daily progress reports
• Tracking and optimizing manpower for each works
• Preparation of conceptual drawings for steel decking or other temporary structures required on site and reviewing shop drawing submitted by sub-con and supervising site installation.
• Reviewing concept drawings and supervising installation of bracing connections between permanent plunge-in-columns for top down column construction.
• Reviewing sub-con's shop drawing for steel strut and supervision of installation work.

Vita Coco, the pioneer in coconut water and the #1 selling coconut water in the US, is a passionate, fun-loving brand in one of beverage’s fastest growing and most profitable segments. Beyond its impressive hydration and functional benefits, Vita Coco has built a real following in popular culture with celebrities, professional athletes, top-selling musicians, and many more. This is where you say SIGN ME UP. But we say, slow down cowboy, read the rest.

In a Nutshell, we’re looking for…

An Operations Engineer with liquid processing experience in the F&B sector, who will be responsible for providing operations support to strategic co-manufacturing partners and who will collaborate closely to implement innovative and continuous improvement initiatives. This role, based out of Singapore, will entail about 50% travel, primarily within the APAC region.

ESSENTIAL FUNCTIONS

Project Management

• Lead projects involving new plant installations and continuous improvement.
• Manage overall project timelines and coordinate with the different stakeholders to ensure on-time delivery of projects
• Work closely with co-manufacturing partners to provide technical support during entire project phase

Operations Support

• Provide Technical Support to ensure Quality, Productivity & Costs are optimized
• Assist in plant trouble shooting and in the resolution of manufacturing related issues
• Work closely with co-manufacturing partners and Corporate HQ in executing new package launches and commercialisation of new products
• Conduct audits of all co-manufacturing facilities to evaluate the manufacturing process and coordinate required follow-up actions
• Work closely with co-manufacturing partners and QA Team to investigate and resolve product quality issues
• Identification of cost savings and optimization opportunities in our co-manufacturing partners, define action plans to execute the actions needed so these are captured.

Innovation and Improvement

• Lead and execute trials with co-manufacturing partners in new process development
• Work together with co-manufacturing partners on product improvements and new product formulations
• Perform technical feasibility and manufacturing audits for potential new manufacturing partners and material suppliers

DESIRED SKILLS AND EXPERIENCE

• 4 years’ experience in the food manufacturing industry, preferably in beverages
• Familiar with factory manufacturing processes and constraints related to low acid food & aseptic beverage production
• Sound technical knowledge and liquid processing equipment, mechanical P&ID design and strong understanding on manufacturing procedures and sequence requirement.
• Exposed to food quality requirements such as HACCP, GMP and ISO Systems
• Excellent oral and written communication skills, interpersonal skills to work effectively in a multi-disciplinary team.
• Willingness to travel around the region (50%).

Vita Coco® is the brand that started America’s craze for fresh coconut water. Informed consumers, pro-athletes and nutritionists as well as in-the-know celebrities and influencers have all become loyal fans of coconut water, swearing by the Vita Coco brand for its delicious flavor, hydrating properties and replenishment benefits. Award-winning Vita Coco, which counts Madonna, Demi Moore and Matthew McConaughey amongst its investors, is one of the most sought-after products in the beverage aisle.

In the U.S. Vita Coco is sold at over 75,000 retailers including Whole Foods Market, Safeway, Target, GNC, Kroger, Publix, Ralph’s, Stop & Shop/Giant, Costco, select Wal-Mart stores and many chain and independent groceries and retailers. It is also sold in dozens of U.S. airports and university campuses, as well as online at Amazon.com.

Vita Coco was founded in 2004 and is based in New York City, with operations in Europe and Asia. Visit vitacoco.com for more details.

Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/Construction Subcontractor, etc. for Detail Design Development.

2. Review Structural Analysis and Calculation carried out by design consultant and develop simple structural calculation for temp. works

3. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, Shop drawing development.

4. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, and Strutting etc.

5. Check/Rectification of all the structural drawing/shop drawing if required.

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline.

2. Minimum 3 years of experience in Civil and Structural Engineering especially for LTA Project

3. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as CS Engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.