· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Mandatory Skills

Job Description:

Roles and Responsibility :

• Understanding of Elastic search architecture, indexing, and querying.
• Experience with cluster management, performance tuning, and scaling.
• Proficiency in configuring Logstash pipelines and understanding various input, filter, and output plugins.
• Experience with data transformation and processing.
• Ability to create visualizations and dashboards using Grafana.
• Familiarity with Grafana/Kibana's query language and features for data analysis.
• Experience with data ingestion and ETL processes.
• Understanding of JSON and other data formats.
• Proficiency in languages like Python, Java, or similar for automation and custom scripts.
• Experience in using Java, SpringBoot, JPA, MySql/PostGres DB, Frontend(Angular/ReactJS) technologies
• Proficiency in linux, windows, cloud, containerized based applications
• Skills in monitoring the ELK stack and troubleshooting issues.
• Ability to analyze logs and data for insights.
• Strong troubleshooting skills for identifying and resolving issues.
• Ability to explain technical concepts to non-technical stakeholders.
• Experience working in cross-functional teams.
• Relevant experience in system administration, DevOps, or data engineering.
• Familiarity with cloud and containerized services (AWS, PCF, OpenShift etc.) can be beneficial.

Qualifications:

• Minimum bachelor’s degree or equivalent
• With 5 years of ELK stack experience with Grafana dashboards in banking industry.
• Keen knowledge or experience in Waterfall and/or Agile Methodologies (ITIL, Scrum, etc would be an advantage)
• Ability to articulate and clearly communicate complex problems and solutions in a simple and logical manner.
• Well-developed analytical skills and the ability to provide clarity to complex issues and synthesize large amounts of information.
• Deadline sensitive and able to work independently and under pressure.
• Certifications in Elasticsearch or related technologies will be an added advantage.

Job Summary:

The Project Engineer will play a pivotal role in the successful execution of various projects at RED Offshore This role requires a positive attitude, exceptional organizational skills, effective communication, and the ability to manage multiple tasks simultaneously. The ideal candidate will be a proactive team player who possesses not only standard project management skills but also the capability to collaborate effectively across multidisciplinary teams.

Key Responsibilities:

• Collaborate with cross-functional teams including design, development, and management to define project scope, goals, and deliverables.
• Develop comprehensive project plans, schedules, and budgets, and ensure adherence to established timelines and budgets throughout the project lifecycle.
• Coordinate and allocate resources efficiently to ensure project milestones are achieved on time and within budget.
• Identify potential risks and develop mitigation strategies to address project constraints and obstacles.
• Foster and maintain clear and effective communication channels among team members, stakeholders, and clients to provide regular project updates and ensure alignment with project objectives.
• Manage and prioritize multiple projects simultaneously, ensuring that each project's unique requirements and deadlines are met.
• Conduct regular project status meetings and generate progress reports for senior management and clients.
• Promote a positive and collaborative work environment, encouraging teamwork and knowledge sharing among team members.
• Ensure compliance with industry standards, regulations, and best practices in project management.

Qualifications:

• Relevant practical experience.
• Proven experience in project engineering or related roles within the [Marine / Oil & Gas].
• Strong organizational skills with a demonstrated ability to manage multiple projects concurrently.
• Exceptional communication skills, both written and verbal, to effectively convey technical and non-technical information to various audiences. (Mandarin and English)
• Positive attitude, resilience, and adaptability in fast-paced and changing work environments.
• Proficiency in project management tools and software.
• Ability to think critically, problem-solve, and make sound decisions under pressure.
• Team player with a collaborative approach and the ability to work effectively with diverse teams.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Job Requirements

1. Good knowledge of Java, J2EE, Hibernate, Spring framework, Spring Boot, JSP, Oracle, Postgres, Struts and Restful Services, Spring Security, LDAP, XSLT,etc.

2. Experience on SOAP Service, JavaScript & jQuery will be an added advantage.

3. Experience in programming mobile application is added advantage

4. Experience with a responsive design for desktop/mobile.

5. Should have worked on 2-3 major projects.

6. Working experience with code versioning tools such as Git and SVN.

7. Effective communication skills in English.

8. Working in cross-functional teams and leading offshore outsourced development and support, Solution architecture consulting

9. 6+ years working experience as IT professional, with proven experience in solution architecture.

10. Wide knowledge and hands on experience in Open-Source Technologies

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Your Job

As a Test Engineer, your primary purpose is to drive quality, yield, and productivity improvements. You will manage the new product release to manufacturing and address any problems affecting the smooth operation of parts. You are responsible for all testing activities related to the transfer of new testers from the design center to the manufacturing plant, including working with the design team to qualify new test systems and propose test limits. Your role also involves sourcing and assembling tester components locally, setting up, and debugging test software and hardware.

Our Team

You will be part of the Data-Com and Specialty Solutions Division, reporting to a Senior Engineer, Principal Engineer, or Department Manager. In this role, you'll collaborate closely with a variety of contacts, including assembly subcontractors, vendors, suppliers, QA Engineers, and Product Design Engineers. This teamwork ensures the seamless integration of innovative solutions and product designs in production processes.

What You Will Do

• Responsible for all testing activities related to new tester transfer from design center to manufacturing plant. Work with design team qualifying new test system, proposing test limit.
• Sourcing, assembling all tester components locally, set up and debugging test software and hardware.
• Tester maintenance for on-line/off-line High-Performance testers, Cirris, BERT, OCR, Robert, etc.
• Perform electrical testing, high speed tester support used in the manufacturing of High-Speed cable assemblies based on standards such as Ethernet, Infiniband, Fibre Channel, PCIe, SAS, SATA, etc.
• Integration of custom designed circuit boards and mechanical fixtures with off-the-shelf test equipment such as digital sampling oscilloscopes, TDR modules and network analyzers.
• Integrate software upgrades into high-speed test systems. Work closely with design centers on software improvement feedback to improvise the system for better solutions.
• Perform electrical testing of High-Speed cable assemblies, analyze test data using statistical modeling tools, identify critical to quality aspects of product design and manufacturing process, perform root cause / corrective action analysis, and provide reports to summarize findings.
• Work closely with multifunctional teams to upgrade globally deployable automated production test systems for cable assembly products. Maintain records for project execution, schedule, and budget. System design includes activities such as mechanical fixture design, PCB design, hardware integration, software development, system documentation, performance testing and characterization, etc.
• Create and execute test plans, conduct software reviews, perform system verification and validation, analyze, and resolve failure modes and document the results.
• Create product and test system documentation, specification, and work instructions
• Introduction of new solutions / technologies in the design of production processes.
• Adherence to procedures related to system management of quality, health, safety and environmental.
• Perform work in accordance with the standards of personal and professional integrity as described in the Code of Ethics and Business Conduct. To comply to PBM Guiding Principles for the job carry out under his responsibility.
• Perform other related duties as assigned by Management.

Who You Are (Basic Qualifications)

• Possess a degree or diploma in Mechanical, Manufacturing, Production Engineering, Systems, or Computer fields.
• Minimum of 2 years of experience with test equipment and measuring instruments.
• Proficient in compiled programming languages such as C/C++ or VB/C# within the Microsoft .NET framework.
• Skilled in using scripted programming languages like Python.
• Strong analytical ability to apply logical reasoning, test assumptions, observe results, and make corrections.

What Will Put You Ahead

• 2-5 years of progressive engineering experience with a robust understanding of high-speed testing and design.
• Extensive experience with RF/microwave test and measurement equipment such as digital sampling oscilloscopes, TDR modules, and network analyzers.
• Knowledge of RF/microwave transmission line theory, including s-parameters, Fourier transforms, and characteristic impedance.
• Experience with relational databases using software like Microsoft SQL or MySQL.
• Exposure to RF/microwave circuit design and PCB layout with tools like Mentor Graphics PADS or Cadence Allegro, and familiarity with advanced PCB fabrication methods.
• Training in Lean/Six Sigma methodologies with an understanding and application of tools such as control charts, process capability, and gage R&R.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Responsibilities

• Lead the execution of the Instrument & Control ITP inspection and test in compliance with rules and Tai Power requirement.
• Ensuring that the deliverables from engineering, fabrication, and principal contractors are of the right quality, according to company and industry requirements
• Supporting engineering design review and provide feedback from basic design, details design up to shop drawings such as SCADA, CCTV, Helideck weather monitoring, ESD, telecommunication, F&G
• Interpreting, implementing, and documenting the overall control philosophy across the wind farm components
• Preparing Instrument & Control equipment technical spec and RFQ for supporting procurement team during quotation sourcing
• Participate in preparation and review of Inspection and Test Plan (ITP) of the wind farm offshore substations (OSS) and commissioning procedure.
• Involving in EC/MC completion test package preparation to ensure construction completion handed over as per sequence and schedule
• Perform a daily supervision of the installation and commissioning
• Attending daily call out inspection and work closely with shipyard construction team, QA and commissioning team
• Involving in wind farm OSS final acceptance test / Proof Concept test procedure preparation.
• Participate in Factory Acceptance Tests (FAT) for wind farm OSS equipment
• Involving in O&M procedure preparation and conducting OSS maintenance execution during operation.
• In association with the Maintenance Systems group, review and update the technical content of the preventive maintenance procedures and to recommend changes where improvements in safety, quality or economy may be effected
• Contributing to the continuous development of new technologies to improve the performance and usability of our wind farm control systems

Requirements

• Bachelor Degree in Electronics/Instrumentation/Communication Engineering
• Knowledge in SCADA, PLA or DCS control system
• Problem solver, attention to details,
• Ability to analyze information and data objectively and logically
• Ability to apply creative thinking and problem-solving skills to complex challenges
• Ability to evaluate the reliability and validity of sources and evidence
• Ability to communicate effectively and persuasively with diverse audiences
• Ability to identify and anticipate potential risks and opportunities
• Possess excellent communication and interpersonal skills

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

Description

• Lead, guide and train technicians
• Troubleshoot and diagnose faulty equipment reported by customers
• Check parts needed and ascertain costs of parts
• Repair Samsung CE produt at customer's place
• Update repair status in the system and follow up the case until job finish
• Answer customers' queries about repair details and parts change
• Escalate case to principal if necessary
• Visit customers to repair equipment on-site
• Any other ad-hoc duties as assigned

Requirement

• Independent and ability to work as a team
• Willing to learn
• Positive attitude
• Minimum GCE 'O' Level
• Able to converse/explain in English
• Able to carry/bring down heavy home applicance/s
• Prefer to have electronic product repair experience
• Preferably with washer/fridge repair experience
• Singapore class 3 driving license is a MUST

Training will be provided.

Working hours: Monday - Friday from 9am to 6pm / Saturday from 9am to 1pm (but must suport full day)

Job Responsibilties

• To prepare project QA & QC related documentation for wind farm related structure/submarine cable transportation and installation/ testing/ commissioning.
• To perform internal and external coordination to meet project quality requirement as per project quality plan.
• To implement and monitor project quality related compliance.
• To conduct fabrication site inspection as required at designated fabrication site, at various construction stages.
• To assist Project Manager in preparing project quality related documents to fulfil owner’s requirement.
• To assist in procurement of quality related items for operation.
• To coordinate with Project Engineer/Manager/T&I Manager in fulfilling quality related matters in project management.
• To be able to liaise with engineer for efficient workflow and contributing to better idea to improve work method.
• Respond to incoming requests for information, requests for proposals in a professional and creative manner.

Job Requirements

• Minimum Diploma/Bachelor’s Degree in Science/Engineering or equivalent
• MIn 5 years of relevant experience in the Oil & Gas, Renewal Energy industry
• Proficiency in ISO 9001:2015 Quality Management System
• CSWIP 3.1 certification or higher
• NDT Level II certification or higher

Responsibilities:

• Creates detailed designs for HVAC systems, including calculating heating and cooling loads, selecting
• appropriate equipment, and specify in system components.
• Prepares technical documentation/drawings, including Equipment Technical Specification, Duct &
• Instrument Diagram, Functional Design Specification, and Site Acceptance Test etc., and submit as per
• project schedule.
• Lead and manage technical meetings with shipyard/client.
• Works closely with shipyard/client, production and project team, suppliers and auditors
• Assist Engineering manager for engineering design and drawings works
• Other duties as assigned by the Management

Requirements:

• Degree/Diploma in Engineering or its equivalent
• Minimum of 3 years of experience in mechanical engineering, preferably in the HVAC marine and
• offshore sectors.
• Proficiency in AutoCAD software (AutoCAD), Carrier HAP (Hourly Analysis Program).
• Proficient in MS Office Word, Excel.

As an Ecolab Process engineer, the primary responsibility revolves around implementing tailored chemical treatment solutions for clients in the refinery and chemical process industry. This entails not only delivering effective treatments but also providing value-added services and managing projects aimed at reducing the Total Cost of Operation (TCO) for the clients. Additionally, the application engineer should be readily available to address any troubleshooting or queries related to Ecolab’s services and products. Given that refineries and chemical plants operate 24/7, the application engineer shall be committed to assisting clients even beyond regular office hours when necessary.

• Leading Chemical Treatment Programs: Take charge of implementing chemical treatment programs at the client’s site. Focus is on ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Managing chemical inventory is essential. Oversee stock levels and equipment replacement parts program to ensure timely replenishment to support seamless operations.
• Monthly Reviews: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Analytical Field Testing: On-site field testing is a crucial aspect of the role. Conduct rigorous analytical tests to identify and rectify any off-specification issues within the chemical treatment program.
• Proposal Development: Collaborating closely with managers, contribute to the development of chemical treatment proposals. These proposals aim to enhance efficiency and address specific client needs. Participate in new application start-ups and evaluations.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Subcontractor performance Management: Qualify, coordinate and monitor subcontractor’s performance delivery to enable seamless flow and delivery to end customer’s expectation.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.

Requirements:

• Educational Background: A Bachelor’s degree in Chemistry, Chemical Engineering or Environmental Engineering, coupled with relevant industry or technical experience is preferred.
• Industry Comfort: The successful candidate should feel at ease supporting clients within the petrochemical industry.
• Communication Skills: Exceptional organizational, interpersonal, and verbal and written communication skills are essential. Clear and concise communication is crucial in this role.
• Reporting Proficiency: The ability to write and maintain clear, concise reports using standard laptop computers is a key requirement.
• Logical Thinking and Decision-Making: We seek an individual who can think logically, apply common sense, and make informed decisions.
• Multitasking and Troubleshooting: Able to troubleshoot problems, manage multiple projects simultaneously and maintain project schedule timelines.
• Self-Motivation and Teamwork: The ideal candidate is self-motivated, goal-oriented, and equally adept at working collaboratively within a team.
• Safety: Able to comply with the Refinery and petrochemical industry and client safety requirement.
• Commuting: The role involves commuting to Jurong Island, and a company car will be provided for transportation. SG Class 3 driving license required.

Purpose of the Position

Reporting to the Shift Supervisor, the Process Technician's primary responsiblity is to ensure the smooth operation of his/her assigned Process Unit, be it in either the Field or DCS Panel Operation.

Job Description

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists.
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition.
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers, reactors, driers, compressors, pumps, etc according to established practices and procedures.
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Collect process samples from assigned sampling points in a safe manner.
• Equipment Inspection Tours according to checklist.

Requirements

• NITEC in Chemical Process Technology /Diploma in Chemical Engineering or related discipline.
• Min. 1-2 years Operational experience with demonstrable exposure to Process Plant Operations and site-based activity or equivalent.
• Experience in Safety Awareness programs or involvement in Safety Committees will be an added advantage.

Permanent, Full Time

We are seeking candidates with:

· A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.

· At least 2 years of experience in Engine Repair & Maintenance.

· Fresh graduates are welcome, and the company will provide training.

Roles & Responsibilities

· Perform the repair, maintenance, or overhaul of marine diesel engines 2 & 4 stroke under the supervision of Engineer / Technicians.

· Comply with all the requirements to carry out the jobs in the shipyards or anchorages.

· Lifting and shifting heavy components of engine back to the workshop for repair/reconditioning and vice-versa.

· Ensure prompt response and smooth communication with the customers

· Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

· Relevant marine / mechanical / engineering qualification

· Hands-on experience in trouble-shooting, maintenance and repair is an added advantage

· Candidates with no experience may apply as apprentices as training will be provided

· Willing to work in a shipyard/anchorage environment

· Able to work overtime as and when needed

An attractive remuneration package and career growth opportunities await the successful candidates. Interested applicants are invited to email with detailed resumes indicating their current and expected salary.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Do you want to be part of the team that revolutionizes the resource exploration and navigation industry? Atomionics is working on quantum sensors based on cold atom interferometry where atoms are cooled down to almost absolute zero using lasers. At such cold temperatures, these atoms start behaving like waves, which allows us to precisely measure the forces acting on them.

This opens up a wide range of applications including, but not limited to, paving a path in the energy transition to zero-carbon, exponentially improving the performance of inertial navigation systems, and transforming the global positioning system. At Atomionics, you will get the chance to prototype, test, refine, finalize, and produce your designs toward making our devices compact and robust for field deployment with the only constraints being power and your imagination.

We are looking for an electronics engineer who:

1. Wants the freedom to innovate by being involved in deep tech research
2. Is excited by the prospect of working within an interdisciplinary team comprised of mechanical engineers, physicists, and software engineers
3. Would like to own their work via compelling equity offerings

We are a small, focused group in a high-energy environment. Our team consists of people at the top of their domains with a diverse set of experience, such as in advanced rocket engines, the first digital cameras, and high-resolution microscopes, apart from cold atom physics. In addition, we are backed by some fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

Responsibilities

• Lead project development from hardware specifications, manufacturing methods and procedures, and manufacturing quality
• Design architecture to manage size, weight, and power of cold atom sensors to target specifications
• Propose new innovative solutions and technology

Must have skills

• Analog and digital design
• Microcontroller/microprocessor and FPGA based design, interface SPI, I2C, RS232, Parallel, USB, CAN, and SATA
• Schematic capture and PCB design layout
• Prototyping and debugging of boards
• Strong interest in and passion for technology

Nice to have skills

• Knowledgeable in RF test methodologies of RF modules and the use of RF test equipment
• Knowledgeable in solid-state and fiber-based lasers
• Knowledgeable in high power switching power supply and battery management
• Leads and owns projects
• Expertise in emerging technologies

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628