· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Work Scope:

• To repair electrical and electronic component of plastic processing machinery and equipment.
• To modify electrical and electronic circuit of machinery and equipment for upgrading, data logging & process automation etc.
• To install or de-install electrical works for factory building or machinery.
• To conduct periodical maintenance for electrical and electronic related works.
• To update and maintain electrical circuit drawing of all machinery and installation.
• To design and build new machinery that may improve production efficiency of factory.
• To assist in procurement for components and parts.
• To keep tooling in organized manner.
• Other duties as and when assigned by the company.

Job Requirement:

• Diploma or certification in Electrical Engineering or a related field.
• Minimum of 3 years of experience in industrial electrical maintenance.
• Able to read single-line diagram.
• Hands on experience in electrical installation and cabling
• Able to work independently with discipline.
• Have teamwork and is committed.
• Able to cooperate on overtime arrangement.
• On-job-training will be provided.

Working Conditions:

• Full-time position with potential for overtime.
• May require working in various environmental conditions, including high noise levels and confined spaces.
• Must be able to lift and carry heavy equipment as needed.

Join our global team to help design, implement, improve, and operate our worldwide Internet Breakouts as well as the VPN Services for Bosch Users and partners. Ensure that the security infrastructure deployment and configurations align with industry standards, compliance requirements, and organizational security policies. Provide Level-2/Level-3 Support for our service portfolio, including shared on-call duty (remote). Collaborate closely with our Architects, Engineers, internal customers, partners, and stakeholders. Initiate, manage, and implement changes to our security infrastructure.

Responsibilities:

• Design, implement, and operate worldwide Internet Breakouts and VPN Services for Bosch Users and partners.
• Ensure security infrastructure deployments and configurations comply with industry standards, organizational policies, and compliance requirements.
• Provide Level-2 and Level-3 support for the service portfolio, including participation in shared on-call duty (remote).
• Work closely with Architects, Engineers, internal customers, partners, and stakeholders.
• Initiate, manage, and implement changes to the security infrastructure.

Job Description:

- Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

- Read Manual and Engineering Drawing for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the MRO tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary Army products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Degree in Mechanical/Mechatronic Engineering

- Experience in Component MRO in related industries

- Experience in effectively leading a team of Technicians

- Experience in SAP System is advantageous

- Knowledge in Army systems will be an added advantage

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting Engine, Transmission or Gearboxes

- Competent in Mechanical/Mechatronic system

- Familiar with components testing

- Ability to read and interpret Engineering Drawing and datasheets

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

- Good analytical and problem-solving skill

JOB DESCRIPTION

* Design and develop Mechanical Equipment/Systems, keeping in mind budget, timelines and other essential resources.

* Work with a team of Engineers in the creation of new product designs, ensuring alignment with project objectives and timelines.

* Utilized CAD Software to create 3D Models and details drawings for new product development.

* Implemented design modifications and optimizations to streamlne the assembly process.

* Collaborate with cross functional teams including product management, manufacturing and quality assurance to ensure successful product development and launch.

* Troubleshoot problems and devise solutions to resolve them.

* Research and keep up with the Dynamic Technology and trends in the mechanical design spectrum.

REQUIREMENTS

* Degree in Mechanical Engineering.

* Knowledge in dealing with Engineering Drawings and 3D Modelling.

* Experience working with designing software - Solidworks and Autocad.

* Minimum 5 years of relevant working experience as Mechanical Design Engineer.

* Able to work independently with minimal supervision.

* Strong verbal, written and communicatin skills.

* Sound knowledge of Computer Application and Microsoft Office.

* Willing to work on weekends and travel occassionally if required.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 1 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Title

Engineer

Occupation

ENGINEER

Job Description & Requirements

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

1. JOB SUMMARY

To oversee tasks delegated by the Project team management to ensure the project is progressing on time and on budget. To collaborate with the whole project team, contributing to the entire project lifecycle.

2. KEY RESPONSIBILITIES

• Work collaboratively with the project manager and team to drive new projects to maturity
• Completes engineering projects by organizing and controlling project elements.
• Develops project objectives by reviewing project proposals and plans
• Determines project responsibilities by identifying and assigning personnel to project phases and elements
• Assist commerical/BD team with cost estimates.
• Determines project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems.
• Process transactions for production related data
• Controls project costs by approving expenditures

A Lead Automation/Systems Engineer at RoviSys will serve as a software or hardware lead on projects, as well as possess the ability to understand functional specifications and/or design specifications and translate that knowledge in the implementation of control systems. A lead engineer will be expected to develop skills required to successfully implement an entire project from both a control system software and hardware standpoint. A Lead Engineer will act as a mentor to Engineers and support training plans for Engineers.

Description of work:

• Consult with clients on digital transformation strategies within their facilities.
• Work in a team environment with engineers and designers from RoviSys, partners and clients to provide state of the art Control system to improve efficiency, product quality and profitability of process manufacturing.
• Design Electrical panels, Control Architecture and wiring drawings.
• Development of P&ID documentation for process clients.
• Define and implement programmable logic controller (PLC)/ladder design, distributed control system (DCS) configuration to meet client needs.
• Testing and on-site commissioning of control systems.
• Support of process control clients at sites in Singapore and aboard.
• Will lead team of engineers and technicians to provide control system solutions for clients.
• Will have opportunities to manage small-scale project of 1-3 people.

Control Systems Knowledge:

• Industry 4.0 applications.
• Electrical design and Process Control fundamentals.
• Familiarity with Controllers, such as single loop control, PLC, DCS or PC based control.
• IOT devices, communications protocols and connectivity.
• Exposure to Control Theory and some process understanding is helpful but not required.
• Platforms: Microsoft Windows XP/Vista/7, Rockwell Automation, Siemens, Emerson DeltaV, etc.
• Process understanding of batch or continuous process control, combustion control, etc.
• Awareness of process safety, validation and good documentation practices.
• Programming languages: PLC ladder Logic, Function Block, SFC VB, etc.
• Third-party HMI/SCADA Software, i.e. Intellution, WonderWare, OSIsoft, etc.
• Others: Network design/administration.

Qualifications:

• Self-motivated, excellent communication skills and enjoy working with people.
• B.S in Engineering, Physics and related fields.
• Min. 2 years as an Engineer with exposure to automation.

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

1.1. Lead and manage the implementation, delivery and operations of digital services, including ICT governance, budget management, application architecture and stakeholder engagement to achieve digital services transformation for the agency.

1.2. Provide experienced technical leadership and direction for digital services

1.3. Define application architecture framework for various components in the end-to-end digital solution and build architecture roadmap.

1.4. Review existing design and implement solutions for improvement from performance, security and usability perspective

1.5. Involved in procurement and vendor management.

1.6. Develop risk identification, quantification and mitigation plan.

1.7. Understand and ensure compliance with policies, standards, and guidelines in Infocomm Technology and Smart Systems Management defined by Singapore Government.

1.8. Prepare technical documentation and design, and conduct sharing sessions

1.9. Improve relevant work systems, processes and SOPs to achieve consistent results.

1.10. Good knowledge of next generation IT, such as cloud technology, IoT, data analytics, system architecture, etc

1.11. Work with Project Manager and clients to handle resources, scope, and schedule

1.12. Design Technology and Application architecture.

1.13. Convert system requirements into software architecture and design documentation.

1.14. Interface and coordinate tasks with Module Leaders to ensure all modules within the system are progressing as planned, and modules can be integrated smoothly.

1.15. Understand and determine clients’ requirements, expectations and design the technical infrastructure.

Job Requirement

1.1. Relevant background in Computer Science/Computer Technology or equivalent.

1.2. Minimum 8 years of working experience in digital service implementation, IT outsourcing management and ICT security.

1.3. Hands-on experience across the spectrum of Web and mobile technologies, such as Microsoft .NET technologies (e.g. C#, ASP.NET MVC 5), HTML5, JQuery, JavaScript, CSS, Microsoft SQL Server/Oracle database management

Roles & Responsibilities

* Project management, system testing, technical analysis

* Providing engineering design support

* technical documentation

* Performing analysis and diagnostics for battery energy storage systems

* Managing battery energy storage systems

Job highlights

4 off days monthly, rest days depend on schedule

Competitive salary 3k and above

Positive and nurturing working environment

Work location: co location

Duration: permanent

Requirements

Qualifications - diploma or high school diploma above

Work experience- at least two year working experience in related fields

Job type- full time

Required languages: English and able to communicate with mandarin speaking customers

Job specialisation- services,engineering

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

This position is ideal for those who is passionate about solving challenging business problems and building applications that provide an excellent user experience. As a Staff Data Engineer, you will be an integral part of the Loyalty and Marketing development team, focusing on designing and building software solutions that leverage data to solve business problems.

The role is for a self motivated individual with strong foundational software engineering skills. The candidate will be extensively involved in hands on activities, including POCs, design, documentation, and development of new functionality. The candidate must be flexible and willing to switch tasks based on the team's needs.
Responsibilities:

• This position is ideal for an engineer who is passionate about solving challenging business problems and building applications that provide excellent user experiences. You will be an integral part of the Loyalty development team focusing on design and building of software solutions that leverage data to solve business problems.
• Strategic thinker and good business acumen to orient data engineering to the business needs of internal clients.
• Lead development and oversee programming testing functions to ensure that projects are securely delivered while fulfilling expectations.
• Identify opportunities for further enhancements and refinements to standards and processes.
• Lead by example, demonstrating accountability, mentoring junior team members, and by contributing to departmental procedures, best practices, and standards.
• The candidate will be extensively involved in hands on activities including POCs, design, documentation, coding, testing, implementation, and documentation of solutions for new development, system enhancements, and production support.
• Candidate must be flexible and willing to switch tasks based on team's needs.
• Development and programming functions to ensure that projects are delivered on time and within budget with good code quality.
• Work with architects, systems analysts, project managers, QA, and other developers to successfully implement business requirements while applying the latest available tools and technology.
• Responsible for the architecture, design, development, implementation of data based software applications. This includes working with both business and technical stakeholders to deliver high quality products and services that meet business requirements and expectations.
• Interact with business units to define requirements and modifications and use case to utilize in designing appropriate solutions.
• Provide recommendation on scope and scale of effort required to develop solution.
• Design, develop, document, and implement new programs and subprograms, as well as enhancements, modifications, and corrections to existing software Develop testing and debugging routines.
• Create documentation and procedures for installation and maintenance.
• Build and maintain relationship with global and virtual teams and third parties on software development or support issues.
• Identify opportunities for further enhancements and refinements to standards, best practices, and development methodologies.
• Work directly with Architects, System Analysts, Dev leads and QA team leads to manage the technical aspects of a development pipeline.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Job Description:

• Aggressively build, maintain and grow accounts & relationships with key clients to achieve sales earnings and management established targets & objectives
• Grow products sales revenue and earnings per client
• Create, identify and solicit aggressively new project potentials by proactively sourcing for sales opportunities
• Identify, Qualify, Present, Negotiate and Close complex deals
• Build and maintain strong relationships with major clients and trading partners
• Tender preparation / assessment of commercial viability to bid, review technical requirements, customer specification review, best vendor assessments, deriving costing estimates, product / vendor sourcing, commercial negotiations
• Maintain high level of customer satisfaction by following up closely with inter-departments, customers & vendors during pre-sales, order, or post -sales processes to deliver end results effectively
• Sales forecasting, project coordination, after sales support, sales presentations
• Participate in trade shows, exhibitions and conferences
• Prompt submission of reports
• Provide product on networking and data-communication products/solutions within an industrial application environment
• Developing solutions, design & consultancy
• Providing pre-sales advice and consultancy on systems
• Interface with principals on technical aspects of products and solutions
• Manage, develop, build and maintain strong relationship with principals and partners on focal products/solutions under its charge
• Keep abreast of new developments and innovations and/or improved related product applications in areas of responsibility
• Additional role may be assigned by management from time to time.

Job Requirement:

• Diploma or Higher in electrical & electronics engineering or equivalent
• At least 1 year of relevant experience in BD or sales role
• Experience in IT industry or related industries an advantage
• Knowledge of industrial & commercial telecommunication systems and its applications
• Experience in the promotion of industrial and/or telecommunication systems, with proven track records in securing projects related to Telecommunication Solutions (such as network, ex-proof and electrical products)
• Technical experience with industrial and/or telecommunication systems and good understanding of equipment specification is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Responsibilities:

• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in all electrical engineering designs, calculations, preparing bill of materials including measurement and sizing, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in construction, installation, testing and commission activities.
• Able to use autocad/drafting software and also guide drafters for drafting

Requirements:

• Good team player. Can work with others harmoniously.
• Willing to learn new activities.
• Good communication skills in English both written & spoken.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Must know how to operate and draw in AutoCAD.
• Must know basic fire and gas detection knowledge.
• Must know how to operate MS office (minimum Word and Excel).
• Prepared to travel if required for overseas meeting
• Min Diploma/ Degree in Engineering or related field.

Job Description & Requirements

* Design, analysis and plan for Civil & Structural engineering works
* Liaise with consultants, contractors & authorities from inception to completion of projects on C&S matters
* Responsible for timely submission of plans and reports to authorities and clients
* Manage projects to meet the time, cost and quality objectivies
* Coordinate and monitor work progress at site including periodical site inspection and attending meeting
* Assists in other ad hoc duties as assigned

Requirements:

• Able to work independently with minimal guidance.
• Proficient in MS Office/Excel
• At least 3 years of local construction experience
• Knowledge in AutoCAD / BIM software is added advantage.
• At least Diploma/ Degree in Civil & Structural engineering or equivalent recognized by the Professional Engineers Board
• Fluent in English , Good project management and communication skills

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

We are looking for proactive marine service engineer who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components Overhaul and maintenance, general mechanical dismantling and assembly works.

Job Description:

· Inspect, diagnose and troubleshoot and carryout repair, maintenance or reconditioning of marine engines 2 & 4

Stroke Main/Aux Engines, Crankshaft & Camshaft Replacement and other onboard machinery.

· Collaborating with internal teams to address customer needs and provide technical assistance.

· Performing on-site repairs, maintenance and reconditioning jobs onboard the vessels in shipyards, ports,

anchorage or voyage and offshore with the team of service technicians.

· Carry out removal and installation work onboard vessels and general servicing and repair in the workshop.

· Interact with customers during the work execution.

Requirements:

· Diploma/Degree in Mechanical, Marine or Engineering related field.

· At least 5 years relevant experience within the engine overhaul industry.

· Be able to work on board vessel's engine room environment, Shipyards, Anchorage etc and travel overseas for

assignments.

· Excellent technical knowledge and problem-solving skills.

· Possess positive and responsible attitude towards work.

· Able to work with other specialists of the same or lower skill level and successfully complete projects.

· Ability to work independently.

· Ability to create internal and external work reports.

· Able to do overtime and work during weekends and public holidays for urgent repair jobs.

· Salary will commensurate according to experience & qualifications.

Additional Information:

· 5 days’ work week

· Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.

· Variable bonus and better medical benefits.

· Career growth & learning opportunity.

Job Description:

• Conduct global structural analyses, including Ultimate Limit State (ULS), Accidental Limit State (ALS), and global fatigue analyses (FLS) for fixed and floating offshore platforms.
• Develop structural design specifications and provide precise fabrication and construction guidelines.
• Prepare detailed structural analysis reports for foundations, support structures, lifting operations, sea fastening, load-out, and dry/wet tow operations, ensuring adherence to classification society standards.
• Perform collision analyses to evaluate structural impacts and propose mitigation strategies.
• Coordinate with classification societies for design and analysis approvals.
• Ensure structural designs comply with offshore wind industry standards and health, safety, and environmental regulations.
• Collaborate with multidisciplinary teams to integrate structural designs with other engineering disciplines.
• Provide technical leadership and mentorship to junior engineers to ensure quality and timely project deliverables.

Requirements:

• Bachelor’s degree in Marine Engineering or Civil Engineering (minimum).
• At least 10 years of experience in Marine & Offshore projects, including conceptual studies, FEED, and detailed design.
• Proficiency in finite element methods and engineering software such as SESAM, SACS, etc.
• Experience or knowledge in wind farm foundations, offshore substations/structures, and floating wind design/analysis is highly desirable.
• Strong leadership abilities, with a commitment to personal and team development.
• Excellent team player with strong communication skills for interactions with clients and third parties.
• Familiarity with marine and offshore industry standards and codes.
• Exceptional verbal and written communication skills, with attention to detail and effective interpersonal abilities.

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Professional are responsible for identifying, analyzing, and relating business
demands. Your responsibilities include aligning priorities, planning and actions
to the overall business objectives. And involve business stakeholders. You will
share and communicate knowledge and innovation. You have knowledge of
the fundamentals of the Semco business model and the value chain.
The function is directly responsible to assist the Project Manager in all aspects
of the assigned project.

• Assist Project Engineers in producing telecom system drawings for
approval submission
• Check system compliance for project requirements and translate to project
documents.
• Checking of equipment ordered for a specific project, ensuring technical
compliance with relevant specification requirements
• Provide project progress updates and status reports to Project Manager
• Provide technical support to system assembly and fabrication, and ensure
assembly is done according to project requirements
• Assist Project Engineers to organize and plan usage of available
resources to achieve optimal performance and cost efficiency for each project
• Assist Project Engineer to report, follow-up and resolve on
non-conformance issues and customers’ complaints
• To maintain Semco’s quality policy and take active part in implementing
quality system
• Critical adherence to deadlines
• Assist the Project Engineer to monitor project deliverables in terms of
delivery and quality control
• Assist in site commissioning if required

We are looking for individuals with the following qualifications and experience:

• Education: Bachelor's Degree in Telecommunications, Electrical & Electronics Engineering, Computer Engineering, or IT.
• Experience: Entry-level candidates welcome

Personal Qualities:

• Excellent analytical and problem-solving skills.
• Strong attention to detail and organizational skills.
• Team player with a positive and proactive attitude.
• Excellent communication and interpersonal skills (written and spoken English).
• Ability to work independently and as part of a team.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Technology Solutions Office is looking for Software Engineer

Internal Code: A25025

What will you do?

• Work with project leads, developers and operations on a live commercial project that has more than one million users on its platform.
• Software support and maintenance of deployed products and solutions
• Work closely with project management and experience design team to deliver project outcomes

• Strong hand-on experience in NodeJS Technologies
• Solid hand-on experience with AngularJS, ReactJS
• Knowledge of Object-Oriented Programming and SQL
• Experience with React Native, Microsoft SharePoint is a plus
• Proficient knowledge of languages such as .NET and/or Java will be a plus
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Experienced in developing on Unix/Linux environments
• Effective communication skills & customer-oriented mindset
• Ability to work with a multiple team and stakeholders
• Enjoy constant learning and working with new technologies
• Excellent critical thinking and problem solving skills
• Experience in public sector projects is a plus
• Candidates who had previously managed small teams will be considered for the Senior/Lead positions
• Appointment will commensurate with experience and qualification.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Purpose: To retrieve and analyse data to determine the company's needs and provide support in decision-making.

Key Area of Responsibilities:

• Understand the stakeholders' requirements and assess the technical feasibility of implementing the best solution to achieve the highest added value.
• Develop BI tools such as reports and dashboards for the various process owners and management to meet business needs.
• Develop automation tools/applications or IT-related solutions to improve the efficiency of the various processes in the organization.
• Develop/source and implement new technologies/capabilities to develop more efficient and secured business processes.
• Identify areas where there is an opportunity to significantly improve the efficiency and security of the business processes, and where there is currently no capability or tool available in-house.
• Create user guides and documentation for the various BI and process automation tools, to ensure usability and maintainability.
• Share the solution, including the user guides and documentation, with the Digital Factory Team so that all BI Engineers can use the knowledge for future projects and back up each other.
• Support and participate in company's continuous improvement program.

Qualification & Experiences:

• Degree in Engineering, Science, Business and Finance or other relevant field.
• Minimum 2 years of experience as a business intelligence engineer in the semiconductor industry.
• Certified Business Intelligence Professional (CBIP) will be an advantage
• Knowledge of Lean Six Stigma
• Proficient in advanced Excel functions
• Knowledge of different programming language (Javascript, Python & C#)