Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

We are seeking a technically sound Business Development Executive or Engineer with a minimum of 5 years of experience in the field of Process, Energy, and Utilities. The ideal candidate will have a degree in an Engineering field and be capable of selling energy solutions, understanding customer and process requirements, and adapting solutions and proposals accordingly.

Key Responsibilities:

• Identify and develop new business opportunities in the energy sector.
• Understand and present energy solutions to customers.
• Analyse customer requirements and processes to offer tailored solutions.
• Develop and deliver compelling proposals and presentations.
• Build and maintain strong relationships with clients and stakeholders.
• Stay updated on the latest technologies and trends in energy solutions.
• Participate in training programs to enhance knowledge of various technologies and energy solutions.

Requirements:

• Minimum 5 years of experience in the Process, Energy, and/or Utilities field.
• Degree in Engineering or a related field.
• Strong technical understanding of Process / Energy Solutions and Technologies.
• Good communication and presentation skills.
• Ability to understand and adapt to customer requirements.
• Outspoken and confident in selling and presenting solutions.
• Self-motivated and results-driven.

Benefits:

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Training to enhance knowledge of various energy solutions and technologies.
• Collaborative and dynamic work environment.

If you are a driven and technically proficient individual with a passion for energy solutions, we would love to hear from you.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

PRINCIPAL ACCOUNTABILITIES

Internal Sales Engineer is responsible for the preparation and delivering technical presentation and quotations explaining products or services to customers and engineers to assess equipment/screens needs and to determine customer’s requirements.

JOB RESPONSIBILITIES

1) Maintain existing customers' accounts.

2) Respond to customers' enquiries, follow-up and provide solutions to clients.

3) Review and prepare sales quotation as per customer's enquiries.

4) Provide regular update to customers on project development in a timely manner.

5) Prepare weekly and monthly sales report. Conduct PPM (pre-production meeting).

6) Sales coordination between factory and overseas sales offices.

7) Liaising with customers on technical specifications.

8) Conduct a thorough contract review with the clients prior receiving Sales Order confirmation.

9) Ensure correct and full information about the Sales order are passed to engineering and production. Able to prepare job sheets with all relevant client requirements in it.

10) Support team in preparing marketing, sales & presentation materials.

11) Provide information to team on market forecast and participate in market analysis.

12) Willing to travel when and if needed.

13) Sales follows-ups. (Temporary) To include partial Supply Chain role:

8.1 Pipes & Raw Materials ordering

8.2 Pipes & Raw Materials cost controlling

- Prepare supply agreements

14) Ensures 5S is implemented in the work area.

15) Adheres company’s guidelines with regards to Safety and Quality.

16) Complies to Company Code of Business Conduct.

17) Promote and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments.

3. Customer focus – Building strong customer relationships and delivering customer-centric solutions.

4. Drives Result – consistently achieving results, even under tough circumstances. Results might be quantifiable – measured in terms in P&L, sales growth, customer satisfaction ratings, new product launched. Qualitative result -- an enhanced reputation among customers, a more vibrant brand that attracts customer and employee talent.

5. Manages complexity – making sense of complex, high quality and sometimes contradictory information to effectively solve problems. Asks the right questions to accurately analyze situations.

QUALIFICATION GUIDE

1. Education : Minimum Diploma in Mechanical Engineering, petroleum or any engineering related course

2. Communication : Fluent both in oral and written English and/or Chinese

3. Experience : Proven and Solid 5 years of work experience in the same field and in the Oil & Gas equipment Manufacturing Environment

4. Software/Hardware : Presentation tools, sales/CRM tools, Microsoft office( word, ppt, Excel – pivot, vlookup), ERP System. Preferably has some knowledge on CAD tool like solid works, inventor or pro-E and able to read drawings.

Job Highlights

• Attractive salary package

• Basic Salary + Commission + Vehicle Allowance

• Excellent benefit

• Dynamic working environment

• 1.5 days WFH

Job Description

• Continually meeting or exceeding sales targets by selling company products to new and existing customers.

• Services existing accounts, obtain orders, and establishes new accounts by planning and organising call/visiting on existing or potential sales prospects.

• Establish, develop and maintain positive business and customer relationships.

• Monitor the company’s industry competitors, new products, and market conditions to understand a customer's specific needs.

• Conduct calls and face-to-face meetings with customers daily.

• Developing and implementing an effective sales strategy to drive sales.

Job Requirements:-

- Positive attitude, self-starter

- Have a sense of responsibility

- Adaptable/flexible thinking

- Strong interpersonal skills

- Always team focused

- Processes a class 3 licence with own transport

- Min 2 year experience in industrial / construction / Marine sales

- Experience with hose management is strongly preferred

Working days: Monday – Friday 8:30am – 5:30pm

Saturday 8:30am – 1:00pm (alternate)

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

We are seeking a skilled and motivated Project Engineer / Senior Project Engineer specializing in ship repair and ship refit. The ideal candidate will have at least 5 years of relevant experience in the maritime industry and possess strong project management and technical skills. This role involves managing repair and refit projects from initiation to completion, ensuring compliance with technical, quality, and regulatory requirements.

Job Description

1. Project Management:

• Manage ship repair and ship refit projects, from planning through execution and delivery.
• Develop detailed project schedules, budgets, and resource plans.
• Coordinate with clients, vendors, and internal teams to ensure project objectives are met.

2. Technical Expertise:

• Oversee progress and technical requirements for repair and refit projects.
• Interpret technical drawings, design documents, and specifications.
• Provide guidance and suggestion to production teams during execution.

3. Quality Assurance:

• Ensure all ship repair and refit work adheres to established quality standards.
• Conduct inspections to verify compliance with design specifications and classification requirements.
• Address quality issues promptly with effective corrective actions.

4. Regulatory Compliance:

• Ensure all work complies with relevant maritime regulations and standards.
• Collaborate with regulatory bodies to secure necessary approvals and certifications.

5. Communication and Coordination:

• Maintain clear and effective communication with clients, team members, and stakeholders.
• Provide regular project updates and reports to management and clients.
• Facilitate problem-solving discussions to address challenges and maintain progress.

6. Risk Management:

• Identify potential risks to project timelines and budgets.
• Develop and implement mitigation strategies to reduce impact.
• Monitor risks and adapt plans as needed to maintain project success.

Qualifications:

• Min. of Diploma in marine engineering, Mechanical Engineering, or a related field.
• Minimum of 5 years of experience in ship repair or refit project engineering.
• Strong understanding of ship repair processes, techniques, and materials.
• Proficient in project management with a proven ability to deliver projects on time and within budget.
• Strong leadership, organizational, and team collaboration skills.
• Excellent communication and interpersonal abilities.

Preferred Attributes:

• Familiarity with High-speed craft systems and operational requirements.
• Experience coordinating with regulatory authorities and international clients.
• Completion of SRM (Shipbuilding and Repair Management) course is an advantage.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

The ASRS Operation Engineer is responsible for the maintenance, repair, and operation of Automated Storage and Retrieval Systems (ASRS) equipment to ensure optimal performance and uptime. This role involves performing preventive maintenance, diagnosing, and resolving technical issues, and supporting system upgrades and modifications to meet operational requirements. Taking up the role of Team leader of the shift.

Responsibilities:

• Operate ASRS equipment, including automated cranes, conveyors, and control systems, to perform material handling tasks such as loading, unloading, and storing goods in designated locations.
• Follow maintenance schedules and perform routine inspections and preventive maintenance tasks on ASRS equipment.
• Diagnose and troubleshoot mechanical, electrical, and software issues affecting ASRS equipment performance, using diagnostic tools, schematics, and technical manuals.
• Conduct repairs and replacements of defective components or parts, such as motors, sensors, actuators, bearings, and PLC modules, to restore equipment functionality.
• Coordinate with equipment vendors or service providers for technical support, spare parts procurement, and warranty/contract repairs as needed.
• Assist Maintenance Team in implement software updates, firmware upgrades, and system modifications to enhance ASRS performance, reliability, and safety.
• Monitor system operation through computerized interfaces or control panels, and respond promptly to alarms, error messages, or abnormal conditions.
• Ensure smooth operation with the aid of warehouse control system (WCS) and Humane Machine Interface (HMI).
• Ensure compliance with safety regulations and company policies by following proper lockout/tagout procedures, wearing appropriate personal protective equipment (PPE), and adhering to safety protocols during maintenance activities.
• Document maintenance activities, repair logs, equipment histories, and spare parts inventory using computerized maintenance management systems (CMMS) or other digital record-keeping tools.
• Provide training and technical support to operators and maintenance personnel on ASRS operation, troubleshooting techniques, and safety procedures.
• Participate in cross-functional teams for system upgrades, capacity expansion projects, or process improvements related to ASRS operations.
• Shift schedule planning, arrangement, and execution.
• Managing inventory accuracy, stock replenishment, and space utilization within the warehouse or distribution center environment. This role involves coordinating with various teams to ensure timely inventory transactions, cycle counts, and adjustments to maintain optimal inventory levels.

Qualifications:

• High school diploma or equivalent; technical diploma or certification in mechatronics, automation, or related field preferred.
• Proven experience in maintenance and repair of automated material handling systems, such as ASRS, conveyor systems, robotics, or similar equipment.
• Strong mechanical aptitude with knowledge of electrical, electronic, and hydraulic systems.
• Familiarity with PLC programming, HMI interfaces, and industrial control systems (e.g., Siemens, Allen-Bradley) is desirable.
• Ability to read and interpret technical drawings, electrical schematics, and equipment manuals.
• Excellent problem-solving skills and attention to detail in diagnosing complex technical issues.
• Effective communication skills and ability to work independently or as part of a team.
• Willingness to work flexible hours, including weekends or evenings, and respond to emergency calls as needed.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Main Responsibilities:

• Taking care for infrastructure support such as servers, storages, VMWare, Firewall (Checkpoint), cisco Switches, wireless AP, VPN, etc.
• Assist 1st level / 2nd level support on any technical related issues.
• Administering and overseeing network infrastructure
• Provide support for video conferencing (Microsoft Teams), and meeting equipment, projector, microphone, etc.
• Provide knowledge transfer for the projects deployed to end-users.
• Manage, support, train users for Microsoft 365 services, such as Outlook, OneDrive, SharePoint, Teams, etc.
• Support IP phone, printers, projectors, display TV, CCTV, and door access, with the assist from vendors.
• Any other Technical related tasks as assigned.

Job requirements:

• Min Diploma in IT / Computer Science / relevant field or higher.
• At least 5-years experience in a similar position is preferred
• Knowledge and experience in cyber security will be an advantage.
• Experience in Network, routing protocol.
• Knowledge of Active Directory, DNS, GPO, Office 365, SQL Server, Druva etc
• Good communication skills and fluent in common language.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical/Metallurgical engineering or equivalent.
3. Must have valid API 510, API 570, API 571 and API 653 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in Shell Bukom Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping, tanks and columns.

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Summary:

• As a Service Engineer, you will play a critical role in maintaining the operational efficiency of our equipment.
• Your expertise will ensure that our services remain top-notch, directly impacting our client satisfaction and operational success.

Key Responsibilities:

• Conduct periodic inspections, repair, service and maintenance of Musasino equipment to ensure reliable operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.

Job Requirements:

• Fresher or related marine engineer experience are welcome.
• A minimum of a Diploma in Engineering (Electrical, Electronics, Mechanical, Mechatronics) or equivalent educational background.
• Ability to work overtime and weekends when required.
• Willingness to travel overseas for an assignment as required.
• Ability to work independently and under pressure, delivering quality results within tight schedules.
• Team player.

Highlights:

• Gross Salary: S$3000 to S$4000/ month
• Working Day: 5 days
• Working Hour: 8am to 5pm
• Overtime paid when working outside of working hours (include Weekend/ Public Holiday)
• Dental and Medical Benefits
• AWS

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

Stork Gears & Services Asia Pte Ltd are an ISP for Rotating equipment from Europe which focuses mainly on Inspections, Repairs, Modifications and Overhaul of Gearboxes for both the Marine and Land based Applications. We have an OEM background, Rademakers, Conrad, Brevo, Kuypers, Jahnel Kesterman, but with an Independent service provider mind-set.

Stork is known for:

• Highly qualified and experienced engineers
• Highly Price competitive vs OEM
• In-house manufacturing critical parts
• On-site reverse engineering

Our service portfolio consists of:

• Diagnostics services
• Onsite services 24/7
• In-house engineering: design of gearboxes,
• Parts manufacturing (Impellors, shafts, gears)
• Custom built
• Workshop repair

Job description: (Field) Service Engineer

Purpose of the job

Responsible for the technical realization of projects, during the disassembly, assembly, inspection and repair, installation and commissioning of equipment, installations and related components.

Characterization

• Performs assignments/projects on the basis of requests from the project manager and project planning.
• Technical lead of the project team consisting of mechanics, (field) service engineers and subcontracted staff.
• Is responsible for maintaining the overview and ensures that the project is executed safely, in a structured manner, with a high quality standard and within planning and budget.
• Projects are performed at client sites (worldwide) or in the workshop. Often under time pressure and in unexpected or hectic circumstances.
• Flexibility: reachable and deployable, also on irregular hours.
• Realizes the most optimal technical solution and report on progress and the (technical) end result to the customer.
• Fulfills a leading role in respect of compliance with safety and environmental instructions, guidelines and policies of Stork and the client.
• Is highly specialized in installation & equipment technology and product knowledge.
• Service—oriented professional.

Tasks/Responsibilities

1. Authorizations

• Independently performing inspections, measurements, repairs, disassembly and assembly of installations, equipment and related components.
• Authorized to operate specialist machines and tools.
• Competent to specialist work based on required training.

2. Execution

• (dis)Assembly, inspection and repair of installations, equipment, related components and connected installations onsite, according to work instructions. Sets priorities on location and specific approach to the work; on site troubleshooting.
• Searches for the technical optimal solution with regard to costs and downtime.
• Responsible for the overview of the progress of the project on-site, ensuring that the project is carried out safely, in a structured manner, with a high quality standard and within planning and budget.
• Communicating the status and progress of the project to the project manager, adequately reporting possible scope changes.
• Self-starting and able to fully prepare, execute and complete the work independently both technically and administratively.
• Can deal very well with tight deadlines and can very well structure work in hectic and/or unexpected circumstances.
• Makes adequate protocols (if necessary) and technical reports.
• Works closely with other relevant departments so that the project can be delivered to the customer in accordance with the scope.
• Monitor and manage technical intellectual property if appropriate.
• Technical assistance and advice to internal and external stakeholders on use, maintenance, repairs, risks and possibly renewal of the installation.

3. Leading the team

• Managing the project team (on-site), ensuring that the project is carried out safely, in the agreed manner, with high quality and within the agreed timeframe.
• Detection of deviations, intervening if a deviation is detected.
• Coaching, supporting and guiding the project team on-site.
• Responsible for timely and adequate internal and external reporting and administration.
• Making and/or supervising correct use of: tools, machines, measuring instruments and other means of production.
• Maintaining equipment in good condition under applicable norms and regulations, timely reporting and/or solving in case of imperfections and malfunctions.
• Proactive in personal development and knowledge sharing within the team and organization.

4. Safety, quality and environment

• Is accountable for safety and quality aspects within the project.
• Meeting and monitoring the correct safety measures for a safe working environment.
• Report safety incidents and / or near misses in accordance with applicable procedure.

5. Others

• Responsible for maintaining contact with the client at an operational level.
• Actively participate in realization of additional work during development and execution of projects, technically assisting the sales department.
• Proactive relationship management; as ambassador encourage clients to purchase more services and / or products.
• Keeps knowledge up to date within his area of expertise (i.e. through keeping track of technological developments and/or professional literature).
• Assists in development of and test new methods, techniques and new services.

Knowledge and Skills

• Relevant technical education, i.e. mechanical engineering
• Relevant technical education; mechanical engineering or related
• Preferably services background
• Possesses required certifications
• Able to read schedules and mechanical engineering drawings
• Use and application of auxiliary tools and measuring instruments
• Fluent in English

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc
• Develop the work schedule and coordination of the project works to ensure project is on schedule
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works
• Handle and resolve all site technical relating matters
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met
• Prepare all relevant checklist for Installation and Testing & Commissioning Works
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works

Requirements

• Min degree in Mechanical Engineering
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client
• Good technical knowledge in understanding the Mechanical System
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills
• Meticulous and analytical with excellent problem-solving skills
• Highly motivated and able to work independently with minimal supervision