Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Equipment – CQV Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Experience in conducting equipment/facility FAT/SAT, IQ/OQ/PQ protocols, and serving as both author and executor of QSR (KAYE validator).

· Proficient in writing PQ, cleaning, development/study protocols, SOPs, and work instructions.

· Responsible for raising Change Control requests, identifying tasks, and performing impact assessments, with a focus on processes and process equipment.

· Experienced in writing deviations related to processes, cleaning, and process equipment (PQ).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

The role is responsible for Equipment Package Ownership (full lifecycle – Engineering Design, Build, Testing (FAT), Installation and Commissioning), including experience in commissioning and qualification of process equipment.

Responsibilities:

● Experience in upstream / downstream / Central services process operation, (experience in equipment design for process equipment will be an advantage).

● Project scheduling and able to come up solutions to keep the schedule on track when there are hiccups.

● Responsible for basic and detailed design, commissioning and qualification activities, including URS development, FAT, SAT, DQ, IQ, OQ and PQ.

● Review industry practices for best-in-class approach.

● Ensure that the appropriate Quality standards are applied consistent with best practice and internal Quality Standards and expectations.

● Deliver the project from conceptual through implementation phase, encompassing support for a wide range of engineering and construction requirements.

● Coordinates with different functions like manufacturing, safety, MSAT, validation and quality for implementation of changes associated with the project.

● Work independently and/or with the project manager to complete the engineering projects within schedule, budget and quality constraints.

● Agile response to equipment issue, troubleshoot and come up with solutions swiftly.

● Any other task as assigned by Supervisor/Manager.

About You:

● Diploma/Degree in Chemical Engineering, Chemistry or equivalent with at least 5 yearss experience in a process engineering role or similar role with a biologics manufacturing plan.

● At least 5 years of relevant working experience in the Pharmaceutical / Biologics manufacturing industry with experience in Process Engineer.

● In Biologics industry with understanding of cGMP requirement.

● Should have Design experience at various stages of project (Base, Detailed design).

● Able to support Installation, Commissioning & Qualification activity at site.

● Must be able to drive project.

● Any other task given related to Process.

Contract length: 12 Months. Option to extend depending on performance and business needs.

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Responsibilities:

• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety/quality, reduce energy consumption, improve production capacity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Coordinate, arrange and plan new grade trial run with R&D and Operation team, and handle the trial run and the evaluation.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk.
• Troubleshoot process issues, perform root cause analysis and propose corrective and preventive measures.
• Participate actively in HAZOP , FMEA and Control plan studies as Process engineering function for safety and quality improvement.
• Oversee Process related capital expenditures project from conceptual design up to Front End Engineering Design (FEED).
• Study and implement Industry 4.0 related technologies as part of Productivity Improvements and Process improvement Projects
• Participate in Company EHSQ program and cooperate with its promotion and improvement.
• Collaborates with other departments in Management systems such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC.

Requirements:

• Bachelor / Master’s Degree in Chemical Engineering is a MUST.
• 2-3 year(s) of working experience in Petrochemical Industries (Preferred) / manufacturing industries with Engineer capacity scopes.
• Knowledge in IATF 16949/ IEC 61511, ISO9001, ISO14001, ISO45001 and SS651 Standards.
• Using Process Simulation software such as Aspen Plus®/ Aspen HYSYS®.
• Familiarity with Distributed Control System (DCS), in particular its logic and sequence modification.
• Familiarity with Safety Case Regime.
• Able to multi-task and handle a wide spectrum of responsibilities.
• Good interpersonal skills and strong analytical skills.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Job Summary:

This role manages the Product Application Lab for Finishing for Electronics (FFE) applications, focusing on Connector, Lead Frame, and Printed Circuit Board products. Working closely with the Sales team and global technical resources, the role will initially focus on Electroless Nickel and Mold Compound de-flash products, with potential expansion into electroplating products and surface treatments. The candidate will support product development, customer trials, and technical guidance across various applications in the SEA region.

About the Company:

Our client is a global supplier and market leader of specialty chemicals, custom finishing equipment, engineered powders, and analytical control systems, serving industries such as electronic components, printed circuit boards, semiconductors, industrial finishing, and decorative sectors.

Responsibilities:

• Develop a deep understanding of company's products, focusing on Electroless Nickel, Mold Compound de-flash products, and other surface treatments for the electronics industry.
• Stay updated on industry developments and competitor products to ensure company's market competitiveness.
• Collaborate with Sales and Technical teams to prioritize customer and application targets.
• Recommend the best products based on product experience and lab trials, optimizing performance to meet customer specifications.
• Conduct lab trials, product testing, and performance measurements, either on-site or remotely with other regions.
• Assist in developing specifications and facility recommendations for local manufacturing of company's products, either at company's site or third-party facilities.
• Hire and supervise technician/s to maintain the lab and assist with customer trials.
• Support local manufacturing of company's products, develop specifications, and ensure quality targets and operating procedures.
• Foster external collaborations to strengthen Technic's offerings and market visibility.

Requirements:

• Master's or PhD in Chemistry or Chemical Engineering.
• At least 10 years of experience in metal finishes for the Electronics Industry.
• Strong communication skills and ability to collaborate across functions and regions.
• The role requires flexibility and the ability to drive results in a fast-evolving industry.

How to Apply

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

The Opportunity:

• Our client, Government Science Agency
• Great learning exposure, training provided!
• Basic Salary: Up to $2,500
• Working hours: 9AM - 9PM, assigned as per shift
• Multiple vacancies available!

Job Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers.
• Monitor basic equipment/process errors and perform recovery.
• Work with parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

Job Requirements:

• Proficient in operating semiconductor equipment and basic troubleshooting.
• Experience in semiconductor manufacturing or wafer processing is a plus.
• Able to transport wafers in cleanroom and coordinate logistics.
• Independent, responsible, and able to work in a team.

Next Step:

• Prepare your updated resume
• Simply click on 'Apply here' to drop your resume.
• All shortlisted candidates will be contacted.

Jason Ng
Direct Line: 6697 7967
EA License No: 91C2918
Personnel Registration Number: R23113333

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$6,500 – $8,000

Job Scope:

Software Development

• Design, Develop and Maintain device drivers for Windows Operating Systems
• Undertake WHQL testing and certification of drivers and device frameworks.
• Design, Develop and Maintain User Libraries and DLLs.
• Participate in all phases of SDLC and prepare corresponding documentation
• Undertake porting and maintenance of existing drivers to new frameworks and OS’s
• Resolve defects reported by internal and external customers
• Collaborate with USB host & device firmware development teams.

Job Requirement:

• Degree/Master’s in computer science/Engineering or related field.
• 5 years or above experience in the area of device drivers development, preferably USB
• In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs
• Excellent C Programming Skills.
• Professional attitude to work and meticulous in coding and testing
• Must have participated and experienced in SQA processes.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Salary: up to $6000 + 250 transport + 1.5m completion bonus

Duration: 1 year contract

Working Days & Hours: Mon-Fri Office Hours

Location: Tuas (pickup from Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun)

Job Description:

• • Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
  • Develop, maintain and troubleshoot the process control system recipe / models.
  • Carry out technical assessment for evaluation of processes
  • Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
  • Develop, implement and monitor robust preventive measures for processing issues.
  • Play a pro-active role in ensure the site safety and quality standards are adhered to.
  • Proactively monitor, identify, develop and implement improvements in processes and equipment.
  • Communicate on a regular basis to the plant personnel on process updates.
  • Train the process techincians and fellow process engineers on the process and procedures as required.
  • Own one or more multiple equipment / GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Job Requirements: Min Degree in Life Sciences/Engineering or similar w relevant internship experience in API plant, preferably from pharmaceutical/chemical industries

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

This role is to support global business processes across sales, factories and business unit organizations, with a focus on assembly pricing activities.

We are looking for a resourceful teamplayer who is adept at utilizing and integrating data from multiple systems to put together pricing proposals. The candidate should be highly adaptable to changing business needs and possess strong analytical skills. This position is based at our Regional Singapore office.

Core Responsibilities

• Focus on OSAT pricing and costing activities for assembly packaging.
• Key responsibility for the initial 3 months will be on daily production price maintenance duties, and approving pricing issues in SAP
• Responsible on cost models preparation to provide cost estimates and manufacturing readiness inputs to business unit, engineering and factory.
• Respond timely to relevant pricing requests in RFQ systems through price benchmarking and profitability analysis.
• Oversee RFQ trend, win/loss effectiveness and RFQ cycle time efficiency
• Support critical meetings with internal cross functional teams on product costing
• Partner with Business Units, factories, and sales to assure integrated and profit maximizing approach.
• Adhoc analysis of various revenue related items

Job Specifications

• BS degree in Engineering.
• Minimum 5 years of relevant experience in semiconductor industry.
• Knowledge in assembly packaging processes will be preferred.
• Familarity with SAP system.
• Advanced Excel skills and ability to manipulate large data set is a must.
• Strategic thinker with a proven ability to translate technical requirements/issues into the business context or vice versa.
• Excellent communication and presentation skills, both verbal and written
• Independent, able to multi-task, and collaborate with cross functional and cultural groups.

Interested applicants, please kindly email your update resume to [email protected]. We regret to inform that only shortlisted candidates will be notified.

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Responsibilites

• Ensure that products assembled and tested conforms to specifications and are in accordance to the quality standard laid out.
• Performs assembly and test processess according to establised process / test instructions.
• Maintain high standard of safety and housekeeping practices (5S) at all times
• Participates in new products evaluation and transfers as assigned
• Support Quality Management System
• Supervise site team & maintain regular & effective communication with superiors and other team members

Requirments

• Degree/Diploma in Mechanical / Electrical Engineering
• Working experience with assembling in mechanical or Electrical will be advantage
• Equipment setup assembling, testing and debug of capital equipment experience will be added advantages
• Working area : Woodlands (will be clean room enviornment) / Kaki Bukit

Role & Responsibilty

• Responsible for quantity take-offs and Cost Control functions for projects.
• Subcontracts management.
• Supervisor and Plan for Daily work schedule and progress for requirement for targeted completion.
• Tracking of Subcontractors/ Suppliers obligations required as per agreement.
• Administering variations to subcontractors and suppliers.
• Preparation of progress certificates for subcontractors and suppliers.
• Assist in the preparation of the monthly cost reporting and forecasting.
• Identification and pricing of variations to the Contract.
• Assist in preparation of monthly commercial report.
• Maintaining registers of variations, extension of time claims.
• Liaising effectively with other Technician, engineers and supervisors to ensure all relevant information in relation to variations. and extension of time claims is captured.
• Any other duties as may be required by the Company.

Requirement

• Diploma / Degree
• Minimum 2 to 5 years experience as a Engineer
• Passionate about Project values of safety & care, being honesty & integrity, customer focus, working together and performance excellence.

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results
• Ability to supervise technicians
• Focus and concentration to understand complex electrical systems
• Using industry-specific tools to analyze and test electronics
• Time-management skills for meeting deadlines
• To Project Management Coordinate with main-con &consultant for drawing submission, meeting with main-con and consultant
• Focus and concentration to understand complex electrical systems
• Self-motivation to keep up with current electrical advances using new technologies
• Ability to supervise technicians
• Prepare Electrical shop & As-buits SLD RCP drawing
• LV &HV CABLE SIZING CALCULATION &PREPARE BILL OF MATERIAL
• select appropriate electrical materials to complete designs such as MSB, DISTRIBUTION LIGHTING FIXTURES, CABLE TRAY LAYOUT,LIGHTING &RECEPTABLE LAY OUT, SINGLE LINE DIAGRAM,ELV system

Key Responsibilities:

Plan and execute underground cable work 22,66,230,400kV and demolition projects.

Oversee logistics operations to ensure efficient delivery of resources.

Prepare and submit tenders while ensuring compliance with industry standards.

Utilize AutoCAD to create detailed drawings and designs for projects.

Conduct project scheduling and risk management to ensure timely and safe project completion.

Leverage tools like Safe365 – SP Digital for safety and digital project tracking.

Perform project scope analysis and create PSR.

Collaborate with cross-functional teams to meet client and regulatory requirements.

Job Responsibilities:

• Planning of project works schedules and controlling the costs of the project.
• Prepare weekly and monthly progress reports to be submitted to the Manager.
• Resource planning such as manpower, material and equipment for the project.
• Liaise with clients on-site on work matters.
• Check shop drawings from the Design Department and from the clients to eliminate any problems on site construction.
• Troubleshoot problems on-site in order to ensure delays are minimized and additional costs reduced.
• Provide technical and practical support to supervisors and foremen to assist them in the construction process.
• Preliminary design of temporary elements for site use or for tender purposes.
• Wastage and productivity control on site.
• Ensure compliance with Company's IMS process and procedures.
• Ensure OSH risk assessment and EMS impact & aspect register are conducted and implemented in company operations.

Pre-requisites:

• Excellent oral and written communication skills in the English language.
• Outgoing personality and service-driven with a positive and "can-do" attitude.
• Proactive and self-motivated in problem-solving.
• Ability to read and interpret drawings.
• Strong time management and project management skills.
• Proficient in the use of AutoCAD software.

Working Environment:

• 5.5-day work week, Monday to Saturday
• Visit project sites is required

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.