SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Candidate Profile:

• Min 3-5 years of relevant experience in process engineering with a precision equipment manufacturer.
• Degree in Engineering (Mechanical/Material/Production)
• Experience in Process Design and control in semiconductor equipment
• Strong in statistical tools, SPC, DOE

Key Responsibilities:

• Define and Document Equipment process requirements and specifications.
• Perform Process characterization to optimize critical process paths to meet equipment specifications.
• Perform data analysis using statistical techniques and conduct process capability studies
• Participate in continuous process improvement activities to enhance Equipment capability.
• Review, simplify, and optimize internal buy-off specifications for equipment with the quality assurance department.
• Support Equipment manufacturing activities by helping to troubleshoot and resolve process-related issues

Responsibilities:

• Responsible for Line sustaining activities and new device process development/evaluation for wet related processes
• Support NPI for any gap analysis and new device safe launch monitoring
• Wet Process recipe creation based on device requirements
• Perform wet process window study and provide improvement plan to reduce OOC and improve CPK
• Lead continuous improvement projects & device qualifications using APQP approach
• Work with Quality Management department to address customer inquiries and issues.
• Execute CIP (Continuous Improvement Program) or manage projects that contribute to improved yield & cost efficiency
• Characterizing wet process and ensure SPC is well maintained and under control
• Start up and qualify new wet processes/material and new equipment within the scheduled timeline
• Work with RnD for new technology roadmap and report the evaluation results in a timely manner
• Update specifications/ documentation to meet TS16949 Quality Standard requirements (Work instruction, PFMEA, OCAP)
• Involvement in Smart Factory (Scope inspection, AI ADC for AOI, Hand Free automation)

Requirements:

• Degree in Engineering or Science
• At least 3 years of experience in the semiconductor manufacturing industry with wet process such as electrochemical plating, wet etching etc
• Statistical (SPC) and analytical skills (problem solving methodologies) are essential
• Application of quality and SPC tools at work - FMEA, DOE, SPC, etc

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

Monday - Friday
8.15am - 6.30pm

Basic + AWS + VB

Responsibilities

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints. • Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues. Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives. • Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements

• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus. Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Responsible (review and check) Process Engineer/s and Process Supervisors works.
• Define System Design Deliverables and review with leads to finalise that suit to the project.
• Scope of works to review with leads and get confirmed with client.
• Develop and / or review design documentation as per Deliverable List with leads e.g. Process Flow Diagrams Piping and Instrumentation Drawings, System Layouts, Equipment and Instrumentation data sheets.
• Review and participate in tendering activities (tender preparation, tender interview/clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor documentation to ensure compliance and completeness in technical scope.
• Brief Process Engineers/Supervisors on the project scope and ensure system complete on schedule.
• Participate in Risk and Process Hazard Analysis.
• Prepare budget and cost estimations.
• Mentor and provide guidance to Process Engineers in their work.
• Support implementation of Engineering Efficiency activities.
• Plan, organise and approve Inspecting and Test Plant, Inspection Qualification and Testing and Commissioning.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Promote safe work practises.
• Promote commercial awareness.
• Participation in providing inputs to Knowledge centre and utilization of temp plates, materials.
• BIM Modelling internal reviews with BIM/CAD Team , CSA & MEP counter parts and review with client for LOD 400, 450 and 500
• Ad-hoc duties as determined by Management.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• With 6 - 8 years of relevant experience
• Experience in design and/or construction in either Deionised/Ultrapure Water or Wastewater or Chemical or Gas Systems
• Experience in leading team in throughout project cycle start from concept design, detail design, construction, testing and commissioning, handing over.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Process Engineer/ Validation Engineer/ Equipment Engineer

• Working Hours: 8.15 - 5.45pm Mon -Fri
• Permanent Position / MNC
• Near Woodlands Interchange

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Prepare and execute process validation protocols (MVP/IOPQ) and reports for new and existing product, process and equipment with tooling, production, maintenance and quality personnel for all customers before mass production.
• Train on MVP/IOPQ to all concerned department/personal and prepare training records.
• Prepare instructions/procedures for the assembly processes, ECN/ECR/Deviation are drafted & executed.
• Execute engineering change notice (ECN)from customer/ in house and update ERP system promptly.
• Analyze defect reported in-house and customer with quality, tooling and production.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap, and perform internal quality system audit.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers
• To ensure all equipment on the mechanical assembly lines are in good functioning state.

Requirements

• Bachelor's degree in engineering with a focus on Process, Mechanical or Manufacturing Engineering
• 3-5 years of experience in a process engineering or validation role, preferably in a manufacturing environment
• Proficient in process validation methodologies and techniques
• Familiarity with quality management systems and regulatory requirements in the manufacturing industry

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies and industry-leading innovators.

Job Description

We are looking for a dedicated Industrial Process Engineer to join our QA team. You will work closely with the operations and engineering teams to document and review operational processes and identify improvements to existing manufacturing and engineering process flows.

Primary responsibilities

1. • Process Development: Design, develop, and optimize manufacturing processes for electronic products to improve efficiency, quality, and cost-effectiveness.
2. • Continuous Improvement: Identify and lead continuous improvement initiatives using Lean, Six Sigma, and other methodologies to enhance production processes.
3. • Equipment Management (Assembly Jig and tool): Oversee the installation, maintenance, and troubleshooting of manufacturing equipment like Test Jig, Tool and accessories to ensure optimal performance.
4. • Documentation: Create and maintain detailed process documentation, including work instructions, process flow diagrams, and standard operating procedures.
5. • Collaboration: Work closely with design engineers, production teams, and quality assurance to ensure seamless integration of new processes and technologies.
6. • Training: Provide training and support to production staff on new processes and equipment.
7. • Safety Compliance: Ensure all manufacturing processes comply with safety regulations and environmental standards.

Qualifications

· Education: Degree in Manufacturing Engineering, Electrical Engineering, or a related field.

· Experience: Minimum of 3-5 years of experience in electronic manufacturing process engineering.

Required Skills:

· Proficiency in process simulation software and statistical analysis tools.

· Strong problem-solving skills and attention to detail.

· Excellent communication and teamwork abilities.

· Knowledge of Lean Manufacturing, Six Sigma, and other continuous improvement methodologies.

· Familiarity with industry standards and regulatory requirements.

· Software skill: Python

Preferred Certifications:

· Certified Manufacturing Engineer (CMfgE)

· Six Sigma Green Belt or Black Belt

· Professional Engineer (PE) license

Dispositions:

• Enjoys leading & interacting with people of all levels.

• Independent with an outgoing personality

• Self motivated with a desire to achieve.

• Mature, Outgoing & result –orientated.

Work Environment:

· This position typically operates in a manufacturing environment with exposure to various production equipment and processes.

· Frequent travel to Batammay be required for training and collaboration with other facilities.

Position

Assistant Process Engineer

Reports To

Process Engineer

Job Overview

The Process Engineer helps in the technical processes of the Production Department. He/She ensures that the Processes and Methodology within the Production Department is technically sound and cost efficient.

He/She analyses Production and Relevant External Data for the Process Engineer to come up with New Strategies to Raise the Efficiency of Operations and Processes in the department. These include Assessing Viability of New Machinery, Introduction of more efficient tooling and Optimisation of important Production Parameters. He also collaborates with other departments such as QC/QA and Planning in Turntech Precision to ensure the Organisation’s KPIs are met.

Most importantly, he/she also is hungry to learn to get up to speed with his/her peers. He/She should also be a team player with the hard and soft skills to direct and motivate his/her teammates to reach production goals.

In this role, we hope to nurture leadership qualities to take charge and ownership of continuous improvement initiatives to further enhance the effectiveness of his/her department.

What your day-to-day will look like (EXPECTED TO PICK UP):

• Assessing Project and Resource Requirements
• Determining Production Quality Control Standards
• Overseeing all Technical Processes
• Organising the Repair and Routine Maintenance of Production Equipment
• Organising Relevant Training Sessions
• Study Energy usage patterns and find ways to save energy
• Assessment of New Methods of Production
• Assessment of New Tooling to aid in Production

You will thrive if you have:

• Min. 1 year of relevant technical and engineering experience
• Bonus: Autolathe or CNC Turning experience
• Strong understanding of the importance on leveraging other people’s expertise
• Willingness to roll up your sleeves and manage “dirty” data (missing or incomplete data sets)
• and produce actionable insights from the data to improve production efficiency
• Creative thinker with strong bias to action exhibiting a “can-do” attitude
• Leadership skills to go beyond the job scope and innovate based on business needs
• Strong team player who can be an active contributor to the leadership, sales, and product and other cross-functioning teams
• You understand the SME culture and can work autonomously in a flat and ad-hoc task-based organization
• Passion for Machining and Mechanical Systems (this industry is not for the faint of heart)

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Responsibilities:

• Be a technical specialist in developing EMS manufacturing solution of Box Build and System Level Assembly capability and capacity to meet customer deliverables.
• Participate in RFQ phase to provide manufacturing quote, to meet customer product specifications and cost expectation.
• Understand customer requirement and develop manufacturing plan of NPI project to meet customer deliverables.
• Execute NPI activities includes project plan (Gantt Chart), process setup, layout & validation and develop the documentation (Process Flow, PFMEA, Control Plan, WI).
• Coordinate and work with Manufacturing Technical Staffs for the First Article run & qualification.

Requirement:

• Diploma/Degree in Mechatronics / Electronic / Mechanical Engineering or equivalent.
  Preferably 3-5 years in Cable Hardness & System Level Assembly and Testing EMS working experience
• Proficient in Microsoft Office (Excel, Power Point)
• Proficient in BOM, 3D CAD and Schematic diagram.
• Experience in FMEA, SPC, DOE and 8D reports.
• Good analytical skill and effective communication with customers and internal stakeholders
• Able to travel occasionally for site support

A REWARDING PLACE

You have the opportunity to work with a creative and collaborative team at the forefront of technology, trends and practices. We are huge advocates for career development and our global operations provide opportunity for professional mobility. Be inspired to grow your abilities, learn from experiences and build the skills you need to forge ahead.

EQUAL OPPORTUNITY EMPLOYER

AEM is an equal opportunity employer committed to promoting and maintaining a diverse, equitable and inclusive environment where differences are valued and encouraged. We employ individuals who align with our values and meet the requirements of the role. All qualified applicants will receive consideration for employment.

The Process Engineer will be based in Changi South reporting to Engineering section Lead.

In charge of process-engineering capabilities focused on cost, quality, and delivery improvements to hold up a manufacturing organization to build state of the art semiconductor equipment's.

Job Responsibilities

• Recognize the manufacturing process, technologies, techniques, and the product.
• Define, implement, and evaluate proposed designs and processes for manufacturability.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable, and reproducible process parameters.
• Develop, implement, and take ownership of process control methodologies.
• Trouble shoot process related issues.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and throughput.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation.
• Review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during innovative technology transfer.
• Provide equipment maintenance and repair hold up as required.
• Guide to cost improvement/reduction programs.

Job Requirements

• Typically requires a bachelor's degree in mechanical engineering or manufacturing engineering or relevant field with equivalent experience and training.
• Typically requires 2-3 years of relevant experience.
• Use of the following tools may be required: Electronic Assembly: color code, component, and schematics.
• May require various PCB operations. Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer. Inspection: bare board, systems, components, cable and harness, microscope, measuring tools. Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Those will Electrical & Electronics degree with process / manufacturing experience are welcome to apply.

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Assistant Engineer, Production Process Support is responsible for running engineering evaluations, collecting and compiling of data with simple analysis, and part measurements. The incumbent will also manage change order (CO) activities as well as non-conformance part movements.

This position reports to the Production Process Support Manager and is part of the Manufacturing Engineering department located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Assist in running engineering evaluations
• Perform basic statistical analysis
• Understand and apply the process flow of non-conformance material and product change action

The essential requirements of the job include:

• Diploma/NITEC in Mechanical Engineering
• Relevant experience in lean manufacturing

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives.