Key Roles and Responsibilities

• Perform front end engineering design (FEED) and basic design for Process Design, Review and Engineering for centralised utility facilities, utility power and water, petrochemical industries and utility scale renewable projects.
• Develop P&ID, mass and heat balance, process flow diagram, operating/ control philosophy, overall supply scheme, layout, equipment specification, yield analysis etc.
• Develop and continually improve internal engineering best practices and procedures to provide engineering services of high quality in support of the various projects.
• Lead in process design and review inter-disciplines design/ engineering with consideration for safety, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost.
• Conduct engineering activities during business or project development including but not limited to pre-feasibility/ feasibility studies, technical due diligence, cost estimation, site survey, technical proposal to customer, project / EPC scoping strategy, vendor selection and review, determine LCOE, budgetary quotation review and clarifications, and all related technical support and solutions etc.
• Evaluation of new technology and innovation solutions.
• Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR etc.
• Participate in HAZOP, QRA, EIA studies.
• Review and approval of detailed design submitted by Contractors and ensure compliance with Standards and all the company best practices.
• Familiar with multiple energy resource simulation and and optimisation tools.
• Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline’s schedule of rates and cost estimate template, engineering checklists etc.
• Ensure all activities carried out are in full compliance to all regulatory and authority requirement.
• Ensure engineering support is provided in a timely manner to all stakeholders through resource planning, close collaboration with discipline engineers and team members, contractor management, etc.
• Where applicable, provide training and guidance other team members.

Key Decisions & Dimensions

• All activities in full compliance to all legal / authority requirements.
• All projects (development and execution) are to be designed, executed and performed to a high quality at competitive costs, safely, within schedule, within budget and meet Sembcorp and industry quality requirement.
• All value engineering and strategic plans developed shall ensure Capex remain competitive, are sustainable and meet the company’s business and operational needs.
• All developed and accumulated knowledge / value must be systematically retained within company

Qualifications & Experience

• Bachelor’s Degree in chemical engineering, process design and engineering discipline or equivalent
• At least 10-15 years of experience in energy business related engineering management and project management (engineering and construction).
• Experience in power and water utilities as well as renewable energy projects is preferred.
• Good command of multiple energy resource simulation and optimisation tools is preferred.

Skills / Competencies & Preferred Characteristics

• Demonstrate critical thinking skill, positive attitude, teamwork, analytical, communication skill, leadership skill.
• Strong self-motivation and work ethic, flexible and thrives under pressure.

Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

• MNC (Manufacturing) - Cable & Connection Technology

• Working Hours: Monday - Friday: 8.30am - 5.30pm

• Working location at Tuas

• AWS + Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing process elements.
• Create Bill of Materials structure.
• Create manufacturing Work Instructions and other process documents in collaboration with the Program Management, Production and Quality Assurance Teams.
• Carry out time studies and update the process cycle times.
• Provide timely technical support to the Production Team pertaining to manufacturing process and quality issues.
• Engage in DFM and Lean Line Design activities.
• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.
• Actively and continuously improve the work processes to improve work efficiency and quality.
• Work with Program Management, Production, and Quality Assurance Teams to identify potential process risks and make recommendations to mitigate these risks.
• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Requirement

• Diploma in Electrical, Mechanical/Mechatronics, Manufacturing/Production, Industrial Engineering or relevant discipline
• 2 - 3 years of relevant experience in manufacturing process engineering
• Possess experienced in the creation Bill of Materials structures will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are looking for an enthusiastic Robotic Process Automation (RPA) Intern who is passionate about automation and technology. As an RPA Intern, you will be part of a team focused on streamlining business processes through automation. The successful candidate will have the opportunity to work with industry-leading tools like UiPath and Power Automate, contributing to the scripting, testing, and deployment of automated workflows across the organization.

Key Responsibilities:

· Assist in the design, development, and implementation of RPA solutions.

· Collaborate with the RPA team to script, test, and deploy automation workflows using UiPath or Power Automate (or similar RPA platforms).

· Work with process owners to understand existing workflows and identify opportunities for automation.

· Help troubleshoot and optimize existing RPA bots to improve performance and efficiency.

· Document automation processes, logic, and results for internal reference and continuous improvement.

· Support the testing and validation of automation solutions to ensure they meet business requirements.

· Learn about the integration of RPA solutions with existing systems and processes.

· Stay updated with the latest trends in RPA technologies and contribute new ideas to the team.

Job Requirements

· Pursuing or recently completed an ITE or Diploma in Information Technology, Engineering, or related fields.

· Understanding of Robotic Process Automation and its potential in business process optimization.

· Basic programming or scripting skills (e.g., VB.NET, C#, Python) are beneficial.

· Strong analytical and problem-solving abilities.

· Willingness to learn and adapt to new technologies.

· Excellent communication skills to interact with team members and stakeholders.

Description:  Prepare piping arrangement or piping layout, 3D models on piping system, pipe support drawing, piping isometric drawing including BOM and construction spool drawing.  Prepare and update piping construction guideline drawings for constructability.

Sotware : Revit/BIM/ Plant 3d/Autocad

COMPANY DESCRIPTION

Red Shield Industries (RSI) is the social enterprise arm of The Salvation Army. By re-using, recycling and restoring donations in kind from the public and corporations, it generates income through its Family Stores to support our mission to provide holistic care to the community.

RSI also strives to assist humanitarian needs in times of crisis and emergency, leveraging on its logistics network to deliever aid to crisis areas in the region quickly and efficiently.

Working closely with local and international organisations, RSI engages them in meaningful programmes for their coprate social responsibility initiatives.

https://www.salvationarmy.org/singapore/red_shield_industries

RESPONSIBILITIES

About The Job

The Process Worker supports the mission of the Red Shield Industries, a social enterprise, highly regarded by public for its excellent delivery donation in kind service which is sensitive and responsive to the community welfare needs and meeting the funding needs of The Salvation Army. It is expected that as a process worker, the job incumbent will sort and distribute donated items according to the guidelines set up to maximize the revenue for The Salvation Army's work.

Key Responsibilities

• Check and process all clothing/toys/bric-a-brac/books/glassware/etc collected are classified as per standard operation procedures
• Ensure items are sorted categorically and distributed efficiently to warehouse for on forwarding to the retail stores.
• Support the execution of the planning and smooth operation of the sorting system and packaging before sending to the warehouse for distribution to the various stores.
• Surrender unclaimed monies or valuables to supervisor who will bring to the attention of the Processing Centre Management.

• Secondary Education
• Physically fit (able to lift 10 to 20 kg of goods)
• Able to stand for long period (4 hours)
• Able to work in non-aircondition environment

Working Hours

• Monday to Sunday: 8.30am to 6pm (inclusive 1.5-hours break)

Work Location

The Salvation Army Singapore Red Shield Industries

356 Tanglin Road Singapore 247674

COMPANY DESCRIPTION

Red Shield Industries (RSI) is the social enterprise arm of The Salvation Army. By re-using, recycling and restoring donations in kind from the public and corporations, it generates income through its Family Stores to support our mission to provide holistic care to the community.

RSI also strives to assist humanitarian needs in times of crisis and emergency, leveraging on its logistics network to deliever aid to crisis areas in the region quickly and efficiently.

Working closely with local and international organisations, RSI engages them in meaningful programmes for their coprate social responsibility initiatives.

https://www.salvationarmy.org/singapore/red_shield_industries

RESPONSIBILITIES

About The Job

The Process Worker supports the mission of the Red Shield Industries, a social enterprise, highly regarded by public for its excellent delivery donation in kind service which is sensitive and responsive to the community welfare needs and meeting the funding needs of The Salvation Army. It is expected that as a process worker, the job incumbent will sort and distribute donated items according to the guidelines set up to maximize the revenue for The Salvation Army's work.

Key Responsibilities

• Check and process all clothing/toys/bric-a-brac/books/glassware/etc collected are classified as per standard operation procedures
• Ensure items are sorted categorically and distributed efficiently to warehouse for on forwarding to the retail stores.
• Support the execution of the planning and smooth operation of the sorting system and packaging before sending to the warehouse for distribution to the various stores.
• Surrender unclaimed monies or valuables to supervisor who will bring to the attention of the Processing Centre Management.

• Secondary Education
• Physically fit (able to lift 10 to 20 kg of goods)
• Able to stand for long period (4 hours)
• Able to work in non-aircondition environment

Working Hours

• 44 working hours
• Monday to Sunday: 8.30am to 6pm (inclusive 1.5-hours break)

Work Location

The Salvation Army Singapore Red Shield Industries

356 Tanglin Road Singapore 247674

Responsibilities

• Business Process Documentation: Determine and document current business processes to identify and understand user needs effectively.
• Root Cause Analysis: Collect and analyze data to identify the root causes of organizational problems.
• Operational Process Improvements: Plan and implement operational process improvements to enhance information systems and product quality.
• Metrics Development: Develop and monitor metrics for process management and identify opportunities for future improvements.
• Functional Requirements and Solution Design: Translate the organization’s business objectives into functional requirements and solution designs.
• Stakeholder Collaboration: Partner with key stakeholders to implement re-engineering practices that align with organizational goals and objectives.

Experience and Skills Required

• Educational Qualifications:Bachelor’s degree in Business Administration, Engineering, Management, or a related field (preferred).
  
• Technical and Domain Expertise:Proficiency in business process modeling, process design, requirements management, and project management.
  Experience with business re-engineering methods, techniques, and the technology industry.
  Familiarity with applying Agile techniques to prioritize and define requirements iteratively.
  
• Certifications:Formal training in LEAN and Six Sigma (advantageous).
  
• Communication Skills:Strong written and verbal communication abilities to engage effectively with stakeholders and teams.
  

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

• Develop design documentation as per Deliverable List e.g., Process Flow Diagrams, Block Flow Diagram, Piping and Instrumentation Drawings, Process System Layouts, Equipment and Instrumentation data sheets.
• Involved with Senior Engineers for preparation of tender document and tendering activities (tender preparation, tender interview / clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor design deliverables to ensure compliance and completeness in technical scope.
• Brief Process Supervisors on the project scope, design details & drawings, project schedule before commencing the project site construction works.
• Involve in daily and weekly meetings for project construction activities and prepare the minutes of meetings, keep records.
• Coordination works with process systems supervisors, construction manager, senior engineers , sub-contractors for daily and weekly process systems construction activities.
• Maintain the project folders and sub folders with relevant project design, safety, construction documents and drawings, conduct monthly reviews with senior engineer and leas engineer.
• Familiar with software design tools Pipe Flo , BIM 360 , Blue Beam, EMP for managing the process system design works
• Familiar with project safety requirements and participate in IFW meetings, project safety meetings.
• Assist Lead/Senior Engineer/s in budgeting and cost estimations for projects.
• Familiar with knowledge Centre and Learned Lessons, study and utilize the temp plates and process system materials to learn and develop the knowledge about the various process systems.
• Assist Quality Assurance/Quality Compliance Manager/Senior Engineer/s in Site acceptance Test and Inspection Qualification.
• Assist Commissioning Manager in system start-up, testing and commissioning and system turnover to client.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Participation in Design for Safety during the design stage works
• BIM Modelling internal reviews with BIM/CAD Team, CSA & MEP counter parts and review with client for LOD 400, 450 and 500.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications
• Experience in design and/or construction in either Deionized/Ultrapure Water or Wastewater or Chemical or Gas Systems.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Senior Process Engineer – Wastewater Treatment Design

Our client is an expanding environmental solutions company specializing in industrial wastewater treatment, as well as water reclamation & recycling. With expertise in design & build, EPCC and O&M services, they’re now seeking a Senior Process Engineer to lead their team in the design, implementation and optimization of wastewater treatment processes and systems.

Job Responsibilities

• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum Degree in Chemical Engineering, Environmental Engineering or related field
• Possess process/mechanical design experience with wastewater treatment projects
• Must be willing to be hands-on to be on site occasionally
• Must be able to draw and review drawings (i.e. create process flow diagrams (PFDs), piping and instrumentation drawings (P&IDs), perform detailed calculations related to plant process design)

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

• 5 days, Jurong, Transport provided
• Basic salary: $4000 - $4800, AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• 1-3 years of relevant experience in Process Engineering
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Boon lay, Transport provided to & fro
• $4000 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Lead a global team to achieve and maintain outstanding performance and cost in Photo and Metrology as the Director of Photo MAP. Your direct team innovates, develops, deploys and transforms standards for photolithography productivity, overlay control for today and in the future in high volume manufacturing. You will implement to this by focusing on manufacturing big rock performance optimization, and ensure priorities are aligned to Micron business plan and/or strategic objective requirements across manufacturing sites.

Responsibilities:

- Establish your organization and developing your team: build up, train, and enable the collaboration across all collaborators

- Create business strategies and roadmaps together with category collaborator groups to achieve best in class performance and cost

- Partner with key collaborators throughout the photolithography community

- Lead worldwide efforts to enhance product based performance through equipment or applications based improvements

- Engage with both internal and external suppliers to strengthen partnership and lead initiatives to achieve and exceed internal customer expectations

- Lead worldwide efforts to transform VOC (voice of the customer) to enhance business process or standards

- Contribute to global expansion projects in both existing facilities and greenfield sites

- Collaborate with partner organizations across the photolithography community and beyond (partner categories, TD, PIE)

- Create and develop strategic roadmaps in collaboration with collaborator groups

Job Requirements and Skills:

- Demonstrated knowledge of the worldwide factory network functions

- Demonstrated team development and leading strategic, transformative initiatives

- Front End (FE) manufacturing or reticle manufacturing, fab process knowledge

- Personnel and resources management, development and mentoring

- Effective communication at multiple levels of the organization

- Effective project management with exceptional customer focus

- Voracious learner and educator

- 8+ years, direct supervisor experience

- Bachelor's degree in engineering or science fields

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

• Working location: Ang Mo Kio Ind Pk
• Working date and time: 8.30am-6.15am (Mon-Fri)
• Salary: $2,000-$3,000 + AWS + Bonus

Responsibilities

• Perform Lapping / Polishing process, machine installation and training.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering.
• Knowledge of Mitsubishi or Siemens PLC is added advantages.
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Can read technical drawing
• Able to use the measuring tool example micrometer, height gauge, CMM
• Knowledge on using Auto Cad

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279