Responsibilities:

• Review and analyze experimental process flows: Identify defect anomalies and quarantine out-of-control process tools.
• Embrace continuous improvement: Seek ways to enhance operations
• Raise awareness of process anomalies: Recognize and communicate issues promptly.
• Leverage inline process signals: Drive process improvements using real-time data.
• Explore new inspection tools and strategies: Aim for earlier problem detection and source identification.
• Innovate with existing tools: Develop techniques to identify relevant process issues.
• Manage image classification models: Enable automated reporting systems.
• Collaborate with the global network to develop best-known methods and maintain alignment between sites.

Requirements:

• Bachelor’s/ Masters in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Capable of international travel up to 3-5 months
• Good communication skills (verbal and written)

We are looking for a highly motivated, ambitious, result driven individual with strong work ethic and integrity to join us as a Photolithography Process Development Engineer/Senior Engineer in NAND Technology Integration (NTI) R&D group. You will be using state of the art equipment to support activities associated with rapid deployment of technology nodes, process margin improvement activities and ensure extended engagement with manufacturing on the upcoming technology nodes.

You are responsible for, but are not limited to, the following:

• Develop and optimize lithography processes to meet yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing photolithography team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Collaborate with Boise R&D peers on technology adaptation and cost optimization towards upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough.

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.

Possess the above qualities ? Join Us !

We are looking for an enthusiastic Robotic Process Automation (RPA) Intern who is passionate about automation and technology. As an RPA Intern, you will be part of a team focused on streamlining business processes through automation. The successful candidate will have the opportunity to work with industry-leading tools like UiPath and Power Automate, contributing to the scripting, testing, and deployment of automated workflows across the organization.

Key Responsibilities:

· Assist in the design, development, and implementation of RPA solutions.

· Collaborate with the RPA team to script, test, and deploy automation workflows using UiPath or Power Automate (or similar RPA platforms).

· Work with process owners to understand existing workflows and identify opportunities for automation.

· Help troubleshoot and optimize existing RPA bots to improve performance and efficiency.

· Document automation processes, logic, and results for internal reference and continuous improvement.

· Support the testing and validation of automation solutions to ensure they meet business requirements.

· Learn about the integration of RPA solutions with existing systems and processes.

· Stay updated with the latest trends in RPA technologies and contribute new ideas to the team.

Job Requirements

· Pursuing or recently completed an ITE or Diploma in Information Technology, Engineering, or related fields.

· Understanding of Robotic Process Automation and its potential in business process optimization.

· Basic programming or scripting skills (e.g., VB.NET, C#, Python) are beneficial.

· Strong analytical and problem-solving abilities.

· Willingness to learn and adapt to new technologies.

· Excellent communication skills to interact with team members and stakeholders.

Description:  Prepare piping arrangement or piping layout, 3D models on piping system, pipe support drawing, piping isometric drawing including BOM and construction spool drawing.  Prepare and update piping construction guideline drawings for constructability.

Sotware : Revit/BIM/ Plant 3d/Autocad

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Job Responsibilities

• Advanced process development tasks SEM CD, OCD or other metrology techniques in 3D NAND technology.
• Identify and provide solutions for inline detection in collaboration with process engineer and process integration.
• Identify modeling opportunities using metrology and detection data to explain electrical failed signature at probe
• Collaborate with US TD Metro team on technology choices for the upcoming nodes and able to translate future technology device needs into clear equipment roadmap requirements.
• Work closely with the planning team to understand Model-on-record (MOR) impact of new technology. Maintain MOR accuracy to enable successful technology ramp.
• Influence vendor equipment roadmap to enable new technology development in Micron

Requirements:

• Bachelor’s/ Masters in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Good communication skills (verbal and written)

COMPANY DESCRIPTION

Red Shield Industries (RSI) is the social enterprise arm of The Salvation Army. By re-using, recycling and restoring donations in kind from the public and corporations, it generates income through its Family Stores to support our mission to provide holistic care to the community.

RSI also strives to assist humanitarian needs in times of crisis and emergency, leveraging on its logistics network to deliever aid to crisis areas in the region quickly and efficiently.

Working closely with local and international organisations, RSI engages them in meaningful programmes for their coprate social responsibility initiatives.

https://www.salvationarmy.org/singapore/red_shield_industries

RESPONSIBILITIES

About The Job

The Process Worker supports the mission of the Red Shield Industries, a social enterprise, highly regarded by public for its excellent delivery donation in kind service which is sensitive and responsive to the community welfare needs and meeting the funding needs of The Salvation Army. It is expected that as a process worker, the job incumbent will sort and distribute donated items according to the guidelines set up to maximize the revenue for The Salvation Army's work.

Key Responsibilities

• Check and process all clothing/toys/bric-a-brac/books/glassware/etc collected are classified as per standard operation procedures
• Ensure items are sorted categorically and distributed efficiently to warehouse for on forwarding to the retail stores.
• Support the execution of the planning and smooth operation of the sorting system and packaging before sending to the warehouse for distribution to the various stores.
• Surrender unclaimed monies or valuables to supervisor who will bring to the attention of the Processing Centre Management.

• Secondary Education
• Physically fit (able to lift 10 to 20 kg of goods)
• Able to stand for long period (4 hours)
• Able to work in non-aircondition environment

Working Hours

• Monday to Sunday: 8.30am to 6pm (inclusive 1.5-hours break)

Work Location

The Salvation Army Singapore Red Shield Industries

356 Tanglin Road Singapore 247674

COMPANY DESCRIPTION

Red Shield Industries (RSI) is the social enterprise arm of The Salvation Army. By re-using, recycling and restoring donations in kind from the public and corporations, it generates income through its Family Stores to support our mission to provide holistic care to the community.

RSI also strives to assist humanitarian needs in times of crisis and emergency, leveraging on its logistics network to deliever aid to crisis areas in the region quickly and efficiently.

Working closely with local and international organisations, RSI engages them in meaningful programmes for their coprate social responsibility initiatives.

https://www.salvationarmy.org/singapore/red_shield_industries

RESPONSIBILITIES

About The Job

The Process Worker supports the mission of the Red Shield Industries, a social enterprise, highly regarded by public for its excellent delivery donation in kind service which is sensitive and responsive to the community welfare needs and meeting the funding needs of The Salvation Army. It is expected that as a process worker, the job incumbent will sort and distribute donated items according to the guidelines set up to maximize the revenue for The Salvation Army's work.

Key Responsibilities

• Check and process all clothing/toys/bric-a-brac/books/glassware/etc collected are classified as per standard operation procedures
• Ensure items are sorted categorically and distributed efficiently to warehouse for on forwarding to the retail stores.
• Support the execution of the planning and smooth operation of the sorting system and packaging before sending to the warehouse for distribution to the various stores.
• Surrender unclaimed monies or valuables to supervisor who will bring to the attention of the Processing Centre Management.

• Secondary Education
• Physically fit (able to lift 10 to 20 kg of goods)
• Able to stand for long period (4 hours)
• Able to work in non-aircondition environment

Working Hours

• 44 working hours
• Monday to Sunday: 8.30am to 6pm (inclusive 1.5-hours break)

Work Location

The Salvation Army Singapore Red Shield Industries

356 Tanglin Road Singapore 247674

Process Technician /Assistant Process Engineer
Working location: Ang Mo Kio Ind Pk 2, Sing Ind Complex, Singapore (569510)
Working date and time: 8.30am-6.15am (Mon-Fri)
Salary: $2,000-$3,000 + AWS + Bonus

Responsibilities

• Perform Lapping / Polishing process, machine installation and training.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering.
• Knowledge of Mitsubishi or Siemens PLC is added advantages.
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Can read technical drawing
• Able to use the measuring tool example micrometer, height gauge, CMM
• Knowledge on using Auto Cad

WhatsApp: https://wa.me/6596112291 (Kyra)

Voon Yih Boon Reg No: R2210672 | The Supreme HR Advisory Pte Ltd EA No: 14C7279

Process Technician / Assistant Process Engineer

Salary: $2,000 - $3,000 + AWS + Bonus

Working Days: Monday - Friday (8.30am - 6.15am)

Working location: Ang Mo Kio Industrial Park 2

Responsibilities

• Perform Lapping / Polishing process, machine installation and training.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering.
• Knowledge of Mitsubishi or Siemens PLC is added advantages.
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Can read technical drawing
• Able to use the measuring tool example micrometer, height gauge, CMM
• Knowledge on using AutoCAD

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Process Technician /Assistant Process Engineer
Working location: Ang Mo Kio Ind Pk 2
Working date and time: 8.30am-6.15am (Mon-Fri)
Salary: $2,000-$3,000 + AWS + Bonus

Responsibilities

• Perform Lapping / Polishing process, machine installation and training.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering.
• Knowledge of Mitsubishi or Siemens PLC is added advantages.
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Can read technical drawing
• Able to use the measuring tool example micrometer, height gauge, CMM
• Knowledge on using Auto Cad

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

The Supreme HR Advisory Pte Ltd

Reg No: R1988890

EA No: 14C7279

Key Skills and Qualification

• Diploma/Degree in Mechanical Engineering. Minimum 1-2 years of working experience in relevant field. Working experience in sheet metal environment an advantage.

• Able to travel and work independently.

• Able to read drawings and understand welding symbols, surface finishes and tolerances.

• Knowledge in Solidworks, AutoCad and ProE software

Job Scopes & Responsibilities

• Create CAD & technology using machine software from Turret / Laser NC programming.

• Create development drawings from customer’s drawings (complicated parts & structures).

• Provide engineering support for production processes and assemblies.

• Design sheet metal product according to customer’s requirements.

• Able to led a team to determine the project steps and approaches (NPI)

• Monitor, follow-up and periodically reviewed project progress.

• Design innovative tooling solution in order to reduce production cost, improve product quality, process efficiency and support product development to meet customers’ requirement.

• Develop and maintain documentation of processes and procedures (WI)

• Provide detail drawings and bill of materials for equipment and sub-assemblies.

• Liaise with in-house Engineers & Technician on assembly and testing.

• Willing to travel on an occasional basis, both domestically and internationally to support the Engineering team when required.

Responsibilities

· To lead a group of sputter EAs to conduct daily sputtering work

· To develop new multilayers thin film structure for new hard disk media programs

· To duplicate hard disk media structure based on design transferred

· To monitor sputter process

Requirements

· Bachelor/ Master’s Degree in Materials Science and Engineering (Chemistry/ Physics/ Mechanical/ Electronics)

· Candidates without experience are welcome to apply.

· Sputtering-related skills in PVD, CVD process, Minitab, Microsoft excel.

To apply, please visit to www.gmprecruit.com and search for Job Code: 21132.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Job Description:
We are seeking candidates with hands-on experience in instrumentation within the process industry. The ideal candidate will have a strong background in the installation, maintenance, calibration, and troubleshooting of process control instruments and systems. Proficiency in working with field instruments, control systems, and safety protocols is essential.

Key Responsibilities:

• Install, calibrate, and maintain instrumentation systems in process environments.
• Troubleshoot and repair instrumentation issues.
• Ensure compliance with safety and industry standards.
• Collaborate with engineering teams for system upgrades and improvements.

Requirements:

• Proven experience in instrumentation within the process industry.
• Strong understanding of control systems, sensors, and measurement technologies.
• Knowledge of industry safety standards and procedures.
• Relevant technical certifications or qualifications.

If you meet these criteria, we invite you to apply and join our dynamic team.

Job Description:
We are seeking candidates with hands-on experience in instrumentation within the process industry. The ideal candidate will have a strong background in the installation, maintenance, calibration, and troubleshooting of process control instruments and systems. Proficiency in working with field instruments, control systems, and safety protocols is essential.

Key Responsibilities:

• Install, calibrate, and maintain instrumentation systems in process environments.
• Troubleshoot and repair instrumentation issues.
• Ensure compliance with safety and industry standards.
• Collaborate with engineering teams for system upgrades and improvements.

Requirements:

• Proven experience in instrumentation within the process industry.
• Strong understanding of control systems, sensors, and measurement technologies.
• Knowledge of industry safety standards and procedures.
• Relevant technical certifications or qualifications.

If you meet these criteria, we invite you to apply and join our dynamic team.

Responsibilities:

• Responsible for Line sustaining activities and new device process development/evaluation for wet related processes
• Support NPI for any gap analysis and new device safe launch monitoring
• Wet Process recipe creation based on device requirements
• Perform wet process window study and provide improvement plan to reduce OOC and improve CPK
• Lead continuous improvement projects & device qualifications using APQP approach
• Work with Quality Management department to address customer inquiries and issues.
• Execute CIP (Continuous Improvement Program) or manage projects that contribute to improved yield & cost efficiency
• Characterizing wet process and ensure SPC is well maintained and under control
• Start up and qualify new wet processes/material and new equipment within the scheduled timeline
• Work with RnD for new technology roadmap and report the evaluation results in a timely manner
• Update specifications/ documentation to meet TS16949 Quality Standard requirements (Work instruction, PFMEA, OCAP)
• Involvement in Smart Factory (Scope inspection, AI ADC for AOI, Hand Free automation)

Requirements:

• Degree in Engineering or Science
• At least 3 years of experience in the semiconductor manufacturing industry with wet process such as electrochemical plating, wet etching etc
• Statistical (SPC) and analytical skills (problem solving methodologies) are essential
• Application of quality and SPC tools at work - FMEA, DOE, SPC, etc

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

• 5 days, Boon lay, Transport provided to & fro
• $4000 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Jurong West, Transport
• $4000 - $4700 basic salary, 1mth AWS, performance bonus
• Medical/dental benefits
• Able to start within short notice/1 month

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• MNC (Manufacturing) - Cable & Connection Technology

• Working Hours: Monday - Friday: 8.30am - 5.30pm

• Working location at Tuas

• AWS + Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing process elements.
• Create Bill of Materials structure.
• Create manufacturing Work Instructions and other process documents in collaboration with the Program Management, Production and Quality Assurance Teams.
• Carry out time studies and update the process cycle times.
• Provide timely technical support to the Production Team pertaining to manufacturing process and quality issues.
• Engage in DFM and Lean Line Design activities.
• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.
• Actively and continuously improve the work processes to improve work efficiency and quality.
• Work with Program Management, Production, and Quality Assurance Teams to identify potential process risks and make recommendations to mitigate these risks.
• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Requirement

• Diploma in Electrical, Mechanical/Mechatronics, Manufacturing/Production, Industrial Engineering or relevant discipline
• 2 - 3 years of relevant experience in manufacturing process engineering
• Possess experienced in the creation Bill of Materials structures will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Roles & Responsibilities

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.
• Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Perform site EHSS inspection/audits and ensure that all corrective/ preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.
• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.
• Operational hands-on experience
• Safety conscious

Education:

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process