Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Perform servicing of chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning / BMS / ACMV / HVAC
• Positive attitude

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Responsibilities:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion. Patrol / Check machine condition / Report / Service proposal with quotation & manage prospective / secure order / execute maintenance job by team
• Solutioning skills such as Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis
• Help up and coordination with Sales & Marketing department. Job task share when the existing customer does machine replacement or expansion / upgrading orders.

Requirements

• Diploma or above in Engineering related academic
• More than 3 years experience in similar industry
• Possess Class 3 Driving License.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Responsibilities:

1. Involve in manufactory processes

• Supervise process flow control
• Supervise machine/equipment setting control
• Quality Control in between processes
• Monitor issues and matters on manpower

2. Provide positive suggestions on improvement on process

3. Suggest machines/equipment alteration for better control and preventive maintenance programme

4. Ensure strict GMP control and guidelines

5. Any other assignment by Management

Requirement:

· Diploma in Pharmaceutical Technology

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 4-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 2-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Your Job

You will be responsible for the design and development of new high-speed custom automation. You will lead the machine development process and guide the activities of tooling design engineers, overseeing the machine lifecycle from quoting to mechanical design and delivery scheduling.

Our Team

You will collaborate closely with the Mass Production, Quality, Product Design, Tooling Design, and Machine Build Teams. This position is part of the DSS Manufacturing Services division and focuses on automation shop activities, design, and project management.

What You Will Do

• Provides assembly feasibility (Design for Manufacturability) and equipment cost estimates to the new product development team.
• Works with engineering department to determine design complete dates. Prioritizes work and delegates work assignments to designer engineers.
• Designs new connector and cable manufacturing machinery utilizing the Siemens NX CAD software.
• Assists in developing and executing the machine qualification plan.
• · Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and developing re-tooling strategies.
• Attends Design Reviews and PFMEA’s while working with design engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Tooling Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Bachelor's degree in Mechanical Engineering.
• 5+ years of mechanical design experience.
• 3+ years of project management experience.
• Proficiency in Siemens NX or a comparable 3D CAD package.
• Experience with high-speed synchronous, asynchronous, and flexible (robotics) assembly systems.

What Will Put You Ahead

• PMP Project Management Certificate along with a Bachelor's degree in Mechanical Engineering.
• Knowledge of machine building techniques.
• Experience in scheduling and budgeting.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Mechanical cam/linkage analysis experience and toolmaking knowledge.
• Familiarity with mechanical and electrical systems design standards and machine wiring & industrial electrical logic.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

You will be responsible for the design and development of new high-speed custom automation electrical control systems, machine software, and user interfaces. Your creativity is key to producing easy-to-operate, safe, on-time equipment that will give Molex a competitive advantage in the marketplace.

Our Team

You will be working closely with Mass Production, Quality, Product Design, Automation Mechanical Design, and Machine Build Teams. This collaborative environment ensures that all aspects of automation and manufacturing are seamlessly integrated and optimized.

What You Will Do

• Provides controls feasibility and equipment cost estimates to automation development team.
• Works with mechanical engineering department to determine design complete dates. Prioritizes work to fulfill deadlines.
• Specifies Control Hardware and generates Bills of Material, Designs Control Panels and Enclosures, Creates Electrical & Pnuematic Schematics.
• Assists in executing the machine debug, qualification, and installation
• Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and supports any software changes in the field.
• Attends Design Reviews and PFMEA’s while working with mechanical engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Parts Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Associate's degree in Electrical Engineering or Electrical Engineering Technology.
• 3+ years of Control Panel Design & PLC Programming experience.
• 2+ years of Project Management experience.
• Proficiency in Yaskawa NON-IEC PLC Programming Language.
• Experience in generating industrial electrical schematics, including safety guarding standards.
• Expertise in the design and documentation of machine controls.
• Strong computer skills and the ability to read and interpret electrical and pneumatic drawings.

What Will Put You Ahead

• Bachelor's degree in Electrical Engineering.
• HMI Programming experience (Redlion, Pro-Face).
• Experience with Vision Systems (Cognex or Keyence).
• Scheduling and budgeting experience.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Some PC language programming skills (.Net or C++).

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical role in developing and modifying process formulations, methods and controls to meet quality standards. Your production engineering skills will help in recommending and implementing improvements, modifications or additions that will help in solving problems. You will review product requirements in terms of product development compatibility and help Pfizer determine optimum costs and schedules of production.

As a Senior Associate, your knowledge and skills will contribute towards the goals and objectives of the team. Your focus and ability to meet team targets will help in completing critical deliverables. Your innovative use of communication tools and techniques will facilitate in explaining difficult issues and establishing consensus between teams.

It is your hard work and dedication that will make Pfizer ready to achieve new milestones and help patients across the globe.

Position summary

Senior Process Engineer serves as a member of new product introduction team will be responsible for leading product manufacturing campaigns from the start of production, providing technical supervision with respect to quality and EHS until completion and release of the material.

The core role of this position is responsible to work with various stakeholders to assess the robustness of transferring processes and analytical methods to successful completion of New Product Introduction (NPI) technical transfer project, with associated risk reduced to an acceptable level.

Position responsibilities

Process Engineering

• Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe / models.
• Carry out technical assessment for evaluation of processes.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensuring the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians on the process and procedures as required.
• Own one or more multiple equipment / GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Organizational relationships

• Internal: Engineering, Process, Technical Services, Quality Operations
• External: Sending Site Subject Matter Experts

Qualifications

Must-Have

• Degree in engineering, preferably chemical engineering pr degree in science with major in chemistry.
• 3+ years of experience in a relevant manufacturing environment

Core competencies

• Process Engineering and Technical Knowledge
• Strong sense of commitment and dedication, with sense of urgency to get things done and results-drive attitude.
• Excellent interpersonal and communication skills, both verbal and written
• Strong team player, adaptable and versatile with the ability to work across different cultures.

Cost Estimation .Invoicing . Project Management . Budget Planning .Construction Schedule and Planning .Communicate with different Disciplines .Problem-solving .Generating Job Packs and Test Packages .Creating Work Method of Statements c/w Risk Assessment. Developing Strategies to improve Company performance,Provide supports to execute MOC (Management of Change) jobs, shutdown job, revamping and turnaround job and to ensure job is executed as Exxonmobil standard and specifications.

Developing Work method of statement, Job safety analysis, Risk Assessment.

Prepare and develop Job packs, Loop folders, test packages, red line mark ups and as-builting.

Prepare and procure materials. Prepare and submit material approval to client.

Review and verify Construction drawings, generates engineering query, field instructions.

Process and Construction and Management @ Jurong Island Field work.

Job Summary

Responsible for engineering activities in product improvement/engineering projects; performs engineering analysis, equipment and process set up, carry out risk assessments and validations as well as production implementation for completed projects.

Job Responsibilities

• Participate in product improvement/engineering projects, and responsible for engineering activities.
• Take the lead in problem solving and action planning in project management.
• Perform risk analysis (FMEA) to define process flow and control plan.
• Perform equipment qualification and process validation for product improvement/engineering projects.
• Provide technical advice and guidance to junior engineers and other departments.
• ·Ensure projects are implemented in line with the schedule and budget.
• Optimize new/improved process parameters to further improve product quality and the overall equipment effectiveness.
• Explore new process to improve product quality or productivity.
• Be responsible for the successful transfer of new/improved process/methodologies into the production with good process margins and inline controls.
• Involved in hands-on execution of manufacturing operations.
• Provide operational training for operators or related personnel.
• Manage administrative duties as well as ad-hoc projects assigned by immediate superior.

Job Requirements

• Minimum a Bachelor Degree in Mechanical/Industrial/Manufacturing/ Biomedical Engineering related disciplines or equivalent.
• Good mechanical or material aptitude and knowledge.
• Good experience of manufacturing process and cGMP manufacturing.
• Experience of operational management and lean manufacturing.
• Clean room/environment control experience.
• At least 2 years of working experience in the related field.
• Excellent English-speaking & writing skills
• Multi-lingual: Chinese (Mandarin) to liaise with Mandarin speaking counterparts, other languages are an asset
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to write professional reports, business correspondence, and procedure manuals.

Work Location

36 Jalan Tukang

Singapore 619266

• Design systems and components that meet needs and requirements.Produce outline designs.Conduct Experiments methodically, analyse data and interpret results.Test and evaluate theoretical designs.Identify, formulate and produce effective solutions to emerging problems.Evaluate final product’s overall performance, reliability and safety.Alter and modify design to meet requirements and to eliminate malfunctionsEstimate budget and scope of project.Solicit observations from operators.Prepare product reports and documentation.Engage in lifelong learning and develop new theories or methods

Job Description

Job Responsibilities:

· Assist the Project Manager in supervising project(s) comprising design, purchasing, quality control, production, and commercial.

· Coordinating drawing approval between classification, designer, and third parties

· Recommend, review & approved design specification

· Responsible for execution of works control as per the project schedule that is planned by the Project Manager or himself

· Clients facing from start to end of project be it site inspection/feasibility/visits, operational requirements such as solar system design and execution

· Vendor management to ensure the project is on schedule

· Provide inputs on accomplished schedules, manpower, machinery, and equipment status to the Project Manager as well as project progress reports

· Costs benefits analysis on proposed project designs and suggesting cost reduction analysis for solar systems

· Administrative files and documentation where applicable

Job Requirements:

· Diploma/Degree in Civil/related engineering discipline/renewable energy

· Min. 2 years of relevant experience in similar industries/fields handling HDB-related projects/renewable energy/solar photovoltaic

· Excellent communication and interpersonal skills to convey technical concepts clearly & effectively

· Proactive, energetic, adaptable, analytical & problem-solving abilities

· Able to work independently in a fluid environment

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628