Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Overview / Responsibilities

The Facilities Cost Benchmark is responsible for developing a comprehensive construction cost and management to achieve long-term Micron goals.

The role will be managing and supporting Micron construction projects cost from planning through closeout, including scoping, pre-planning, design, construction administration, Facilities budget cost benchmark management with different Micron site.

Responsibility includes budget cost managing & improving of new project planning business process. Gathering, analyzing & benchmarking Micron current manufacturing sites & construction projects, providing accurate & timely information to project evaluation team. Facilities Cost Benchmark also has another important responsibility is to evaluate the global semiconductor factory construction cost comparison.

Responsibilities

• Manage and lead new construction project cost process.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with requirements.
• Prepare new project Cost & schedule report & long-term plan reports for management review.
• Developing and managing initial project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Maintain effective communication with project team members and relative stakeholders to provide project updates, address concerns and foster strong working relationships.
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams
• Collect, classify, evaluate data and information used in supporting the new Micron construction project planning evaluation request.
• To evaluate the global semiconductor factory construction cost comparison.

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in Master planning & project planning is thus highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 5 years of budget and cost management experience.
• Good analytical skills with problem solving aptitude.
• Skills in excel and simple code writing desired.
• Ability to integrate and work in a global multicultural team
• Great leadership, interpersonal skills and team building spirit.
• Excellent communication skills, both written and verbal.

Minimum Experience & Skills:

• Candidates with experience in Fab or facilities construction and operations.
• Demonstrable experience in the construction or semiconductor project cost management and/or other relevant industries is strongly preferred.
• Strong financial understanding and experience in project budgeting and cost control.
• Strong communication skills, as well as the ability to visualize issues and communicate them to others.
• Outstanding organization, coordination and leadership skills – ability to coordinate and motivate TMs from multiple sites and different background.
• Ability to work collaboratively and pro-actively in a team environment.
• Moderate skill in excel and simple code writing desired.
• Effective delegation skills.
• Experience in managing large-scale construction projects.
• Language: Chinese, English. Japanese would be preferred.

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Primarily responsible for solving technical business solution needs of partner and/or end user by providing presales support
• Develop working proficiency and obtain certifications on assigned products and technologies through self-directed and formal training
• Responsible for conducting hands-on POC independently
• Independently present vendor’s solution to partners and end-users
• Provide updates and trainings to partners and end-users when required
• Collaborate, work closely and support product managers and channel account managers, in bringing opportunities to closure
• Provide timely and accurate reporting

Requirements:

• Degree / Diploma in IT / Computer Studies or equivalent
• Minimum 2 years of hands-on experience in IT network and Cybersecurity domain
• Strong knowledge of security and networking infrastructure environment
• Process good analytical, communication, interpersonal and personal skill
• Good attitude with willingness to learn
• Demonstrate high level of independence

Yee Jie Ling Jaslin | EA Reg. no.: R1440114

RS Recruitment Agency LLP | EA Licence no.: 17C8809

The Mercedes-Benz AG Group CISO heads Mercedes-Benz’s Global Cyber Security Department (based in Stuttgart, Germany). We are looking for a Cyber Security SIEM Use-Case Engineer to join our Cyber Intelligence and Response Centre (CIRC). This role is crucial for the engineering, development, and continuous improvement of threat detection use-cases within our SIEM . You will also be involved in the engineering and development of custom rules to detect potential threats swiftly and creating transparency to map existing detection capabilities to the MITRE ATT&CK framework.

Key Responsibilities:

• Proactively create, test, and tune new detection use-cases in the SIEM
• Review and enhance existing detection use-cases using Machine Learning or User & Entity Behaviour Analytics (UEBA).
• Map detection use-cases to the MITRE ATT&CK framework to assess SIEM monitoring coverage.
• Perform regularly updates to threat detection engineering playbooks, processes, and documentation.
• Collaborate closely with the SOC to challenge and improve detection and prevention capabilities.
• Identify and implement SIEM use-cases to address blind spots.
• Coordinate with the log onboarding team and SIEM architect to validate new log sources for compliance and improve SIEM backend performance.
• Collaboration with Service Operations team to address challenges, process fulfillment, documentations, and improvement of Service Operations Quality.
• Provide governance on topic which related to operational stability.

Join us to play a pivotal role in enhancing our cyber security measures and protecting our global operations.

QUALIFICATIONS

Specific Knowledge

• Intense knowledge in using Splunk Enterprise Security (ES)
• Intense knowledge in developing and tuning detection use-cases (Correlation Searches) in Splunk based on Data Models
• Experience in Machine Learning and Risk Based Monitoring in Splunk is an advantage
• Ability to analyse and interpret security logs and events to identify potential threats and attack patterns
• Experience in validating data source compliant using the common interface model (CIM)
• Experience of setting up and utilize data models in Splunk
• Deep understanding of cyber security concepts to create detection use-cases targeting various phases of attack lifecycle
• Understanding of MITRE ATT&CK framework and detections of various tactics and techniques
• Experience and capable of creating interactive dashboards, alerts, reports in Splunk

Experience

• Degree from a reputable university or significant course work in Computer Science, Networking, engineering or other computer-related fields of study.
• At least 3 years of experience with demonstrable skillsets in SIEM use-case engineering, with over 5 years of experience
  in cybersecurity
• Previous relevant experience working in a security operational role, ideally within a Corporate, Military, or Police environment; engaging with and responding to a diverse array of internal stakeholders, including senior management
• Have good emotional intelligence and is a proven team player
• Rational and calm under pressure
• Fluency in the English language
• Effective oral and written communication skills
• Good timekeeping ability to cope with a tight deadline and achieve operational objectives
• Self-motivated with the ability to carry out assigned tasks with minimum supervision

This position is based in location Singapore. A valid and approved work visa is required for employment in Singapore in accordance to local labour law regulations. We regret to inform you that only shortlisted candidates will be notified.

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

UCT is looking for a Configuration Engineer to join us in Singapore!

Duties and Responsibilities:

• Review and ensure NOC and S.O configurations accuracy.
• Creating and submitting Engineering Changes through Agile.
• Maintain sales order BOM & initiate ECO change management.
• Coordinate the ECOs/MCOs/DEVs/ECRs/SRD process internally. Flawless execution on tracking the implementation of ECO/ECN/ECR/SRD.
• Submitting Problem Report/ Supplier Problem Sheet to customer for BOM related issues (engineering-related issues).
• Ensuring all affected parts and BOMs are included in the CR/IR/PR or corrected via the Engineering Change Order (ECO) process.
• Understand the scope of the engineering change downstream.
• Responsible for setting up, manage and revise all the customers' product information, i.e. BOMs, part numbers and AVLs to have proper control on assembly revision.
• Streamline the BOM structure setup with Product Engineer for assembly sequence control, traceability data collection and material back flush accuracy.
• Work with Product Engineer to restructure customer BOM to work with UCT manufacturability.
• Validate and ensure all customer document packages such as Assembly DWG, Fabrication DWG, Procedure & Test and Manufacturing Instruction available and upload to Agile system.
• Work closely with internal/external customers to resolve any configuration issues.
• Generate list of new parts/new revision parts that needs sourcing info to the quote team for pre-determined NPI projects.
• Lead department improvement projects ie: RPA, QMS BKM, Global Training Videos.
• Ability to guide and provide technical supervision and technical support and guidance to other engineers.
• Attend audits ie: customer’s , internal and third party certification audits.
• Other tasks and responsibilities as assigned by manager.
• Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without.

Knowledge, Skills and Experience:

• Proficiency with MS suite, and ADOBE Acrobat. Advanced Excel knowledge, and design experience is a plus.
• Knowledge with engineering documentation and document control procedures.
• Able to read technical drawing and mechanical BOM.
• Basic understanding of Industrial Equipment manufacturing.

Educational/Certification Requirements:

• Degree in Engineering with a minimum of 6-8 years of related experience.

At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, a,ge, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Career Opportunity for a Production ENGINEER

The production engineer reports to the Production Manager. The main responsibility lies in preparing report, analyse data and make recommendations for improving plant operations and solving production-related problems. You are able to contribute towards achieving organization’s goal on excellence and advancement, possesses the ability to communicate effectively, dedicated, passionate with a positive attitude to inspire and create followers. If you possess strong analytical ability, is creative and confident, we want you.

Responsibilities:

• Maintain a high level of production efficiency through continuous improvement and cost effective
• Identify, trouble-shoot production problems and improve production processes
• To initiate and carry out the necessary corrective action for non-conforming product
• Liaise with outside contractors relating to scope of work and projects assigned by immediate Superior
• Identify training needs for employees and recommend training and upgrading of potential employees
• Maintain and update operating manuals for all the manufacturing equipment and facilities
• Ensure high standard of product quality standards to IATF16949 and ISO13485
• Ensure good housekeeping and safe working environment

Personal Attributes:

• Able to handle under pressure, flexible and multi-tasking.
• Creative, passionate about technology, meticulous with eye for details.
• Work with different level of hierarchy to achieve a cohesive relationship

Requirements:

• Diploma in Manufacturing/Mechanical Engineering or equivalent
• Minimum 2-3 years experience in related field and industry
• Singaporeans/PRs are preferred

Main Activities:

• 50% on board

• 50% support at the office

• Perform servicing, repairs and maintenance on related industrial equipment (diesel engine, auxiliary engine, Volumetric Meter,etc)

• Good knowledge of high speed diesel engine

• Able to prepare a hand-written work done, with data recorded as per format templates and service report with photos, upon completion of job.

• Experience in handling harbourcraft vessels/small barges operation or coastal bunkering operation

• Liaise with customers on delivery schedule by bunker barges and requirement

Requirements:

• Certificates or Higher in any Marine or Mechanical or Automotive or Engine or equivalent engineering

• Min 2 years of working experience in Engine, Genset or automotive or Marine industries

• Familiar with Singapore port waters

• Valid MPA Helmsman / Steerman (Port limit) license is an advantage but not a must

• Good knowledge in MS Office.

POSITION : Engineer, ESD (Environmentally Sustainable Design: Green Mark, Green Building)

LOCATION : Flexible (Singapore) REPORTING TO : ESD Manager

POSITION SUMMARY:

Will significantly contribute to building a better world that is environmentally sustainable. Opportunity to work with multicultural international teams and be involved in large projects for optimizing indoor performance, maximizing energy and water saving, sustaining the environment and obtaining international recognition.

COMPANY PROFILE:

Afogreen Build is a green consultant based on Sydney, Singapore, and Jakarta. We are committed to provide excellent and hassle-free services in achieving environmental sustainability through green consultancies. Our team has decades of experiences and proven track records of various green consultancies with worldwide clientele including those from the USA, France, UK, Australia, China, Japan, Singapore, Malaysia, Indonesia, and Vietnam.

JOB DESCRIPTIONS

· Manage green consultancy projects independently with minimal supervision.

· Prepare reports, presentations and project submissions.

· Search for materials, products, technical specification and cost.

· Conduct all necessary calculations and simulations, such as ACMV system, lighting, landscape, ETTV/OTTV, energy simulation, wind simulation, daylight simulation, solar radiation simulation, etc.

· Coordinate multidisciplinary consultants, building owners, contractors, suppliers, and authorities.

· Conducting physical walk through and detail measurement of the building related to ACMV, lighting, indoor comfort, etc, to analyse building system performance and propose improvement.

· Support marketing, sales, training, and administrative activities.

REQUIREMENTS

· Engineering Degree (mechanical, electrical, building science).

· Fluency in written and spoken English.

· Able to operate CAD software, energy simulation, wind simulation, wind driven rain, and daylight software.

· Understanding of building systems particularly in mechanical, electrical, and plumbing.

· Understanding of Green Mark, LEED, GBI, Greenship, WELL, and other green rating system.

· At least 1 year of relevant working experience. Candidate with more experiences can be considered for senior position.

PERSONAL ATTRIBUTES

· Has leadership quality that can lead and guide others to achieve project goal.

· A person with meticulous eyes and careful with details.

· Good interpersonal communication skill

· A quick learner with initiative to take necessary actions beyond instruction given.

· An independent and highly self-motivated individual who has a sense of urgency towards project completion and strong problem-solving skills.

Please submit detailed CV, academic transcript and expected salary to [email protected]

We would like to seek your understanding that we will not be able to reply all applicant on the application status. Only selected applicants will be invited to interview. Further company information can be found in www.afogreenbuild.com

RESPONSIBILITIES

v Manage project schedule and ensure that goods are delivered on-time in accordance with demand and goods availability.

v Liaise with customer on project related activities.

v Provide engineering support to the manufacturing plant for wellhead and X’mas tree projects such as to resolve non-conformance.

v Coordinate among various departments in the plant and Singapore design office to ensure seamless project execution.

v Organize project kick-off meetings and regular project meetings.

v Travel to vendors or customers’ facilities for meeting and discussion.

v Participate in contract review with Singapore commercial team upon receiving customer order.

v Involve in engineering review with Singapore engineering team to provide input from manufacturing plant.

v Manage and monitor project cost.

v Any other ad-hoc duties as assigned.

REQUIREMENTS

v Degree in Mechanical Engineering.

v Minimum 3 – 5 years of working experience as System Integration Engineer in the Oil & Gas Industry

v Familiar with API 6A, Surface Wellhead and X’mas tree product.

v Possess good engineering knowledge. Subsea knowledge will be an added advantage.

v A team player with ability to work with all levels of staff.

v Can work under a fast pace environment with tight schedule.

v Ability to travel frequently (about 50%).

v Meticulous and particular about product quality.

v Independent, resourceful and responsible.

v Proactive with ability to identify issues and propose solutions.

Troubleshoot the production machine technical problems

Responsible for end-to-end machine technical control

Overseeing the control of Masterbatch

Manage the maintenance schedule, Troubleshoot and coordinate with outsources for repairs

Minimum 3 to 6 years experience working in plastic production industries

Be the technical advisor for technical service, support and running trials with customers

Preferred Any Degree / Diploma

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are seeking Senior Engineers responsible for the design and implementation of Communication Systems for military and/or commercial applications. You must be able to work in a fast paced and dynamic environment. You will work with our experience team members to provide cutting-edge technology to the customers.

Be Part of Our Success

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Qualities We Value

• Minimum 2 to 3 years working experience in industry
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred
• Computer literate e.g. MS office, Visio
• Excellent Oral and Written Communication Skills
• Excellent Time-management
• Good Learning Capability
• Working location is in Jurong East
• Singaporeans Only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated
• Meaningful work and projects that make a difference in people’s lives
• A fun, passionate and collaborative workplace
• Competitive remuneration and comprehensive benefits

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Strategize on maintenance, work instruction and methods to create plant equipment preventive maintenance procedures
• Support in the planning of routine maintenance of production equipment
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle
• Oversee and control maintenance costs. Manage budget for equipment upgrades and replacements.
• Train and mentor technicians in equipment operation concepts and maintenance techniques
• Function as project development member to install/ upgrade equipment. Schedule and obtain project material and manpower
• Support plant EHS and quality initiatives and targets
• Assist with developing budgets and long-range plans based on company growth and future maintenance needs

Major Responsibilities:

• Responsible for the maintenance (corrective, preventive, predictive) of plant equipment, wet process and dryer, dry blending and packaging, Clean In Place (CIP) systems, warehouse in compliance with site safety and GMP procedures to ensure good uptime and good MTBF
• Support the equipment qualification and validation such as walkdown, punch list commissioning, IQ/QQ/PQ for any new projects
• Execution of work order and record job performance via MAXIMO system
• Writing job aids and maintenance SOP, CCA and ER investigation reports
• Manage and lead contractor, vendor and service providers to perform maintenance or project works
• Maintenance budge for area of responsibilities
• Lead and take part in continuous improvement efforts/projects
• May act as a delgelate to the Engineering Manager when required
• Any other duties as assigned by supervisor

Requirements:

• Bachelor of Engineering (Mechanical, Mechatronic, Aerospace) or related disciplines
• Minimum 2 years of relevant mechanical/maintenance experience in manufacturing plant, preferably within GMP manufacturing environment or chemical manufacturing.
• Good communication and interpersonal skills
• Good team player and able to multi task

*Kindly note this position is based in Tuas

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Working with professionals for the building and maintenance of Formula One Race Track

Taking of road levels, work out estimates for proposed work and putting up trafffic control plan

Carry out site measurements and prepare job measurements for ordering of required premix

Planning and supervising of assigned project which includes night work as scheduled by LTA

Manage race track construction team and adhere to health and safety guidelines

Undertake risk assessments, deal with client, transport specialists and members of public

Submit weekly progress report and attend monthly progress meeting

Ensure machineries and equipment are kept in good working condition at all times

Job Descriptions:

• Provide electrical and technical support to the Operations team with electrical troubleshooting
• Prepare electrical spares in workshops to be in acceptable working conditions
• Perform electrical troubleshooting and PLC troubleshooting to increase productivity and lower maintenance cost with high uptime
• Optimize power system to ensure sustainability
• Create and maintain electrical drawing library documenting machine details and modifications
• Ensure top notch Safety, housekeeping and greenery in area of work
• Support all improvement projects such as machine improvement, productivity improvement and safety improvement projects

Job Requirements:

• Minimum Nitec or Diploma in Electrical/ Mechanical Engineering
• No experience or at least 1 year experience in construction field.
  Good attitude, willing to learn and team player.