Provide process engineering expertise for process design, process scale-up, trouble-shooting and process efficiency improvements. Interrogate laboratory working directions to determine optimum plant configuration to ensure that the process [chemistry + plant] meets the scale-up objectives in a safe manner. Support capital projects for R&D Jurong.

Key Responsibilities

Lead process engineering activities for NCE projects in the pilot plant

• Review of chemistry scale-up requests with Chemists, Operations and Engineering to determine optimum plant configuration.
• Define detailed plant and modification design. The time period for introducing new chemistry onto plant is usually less than 4 weeks, during which time any new equipment requirements must be identified, designed, fabricated, installed [by on-site staff or contractors], commissioned, tested and operating staff trained in use before chemical processing starts.
• Agree level of hazard assessment with Operations and complete Process Risk Assessment.
• Review batch record, carry out installation checks, write WI [Work Instruction] or SOP [Standard Operating Procedure] as required and train operators.
• Support campaign on plant, troubleshooting any engineering issues.

Technology Transfers

• Generate sufficient process engineering information for GSC to ensure that the process can be effectively introduced into the desired production plant.
• Support synthetic organic chemists, process safety scientists, and process chemists in the design of processes suitable for effective scale-up.
• Assess critical process characteristics and requirements as well as existing plant capabilities and limitations by gathering and interpreting suitable experimental data.
• Significantly contribute to the development of robust manufacturing processes for the synthesis of bulk drug substance by evaluating alternative processing strategies and recommending potential process improvements.
• As a member of the ChemDev project team, identify and effectively communicate the best suitable scale-up strategy for a process including recommendations for the application of new processing technologies.
• Play an important role in facilitating a seamless technology transfer of processes to GSC by the application of state-of -the-art tools and procedures.

Capital Projects

• Act as client representative for capital projects, to ensure all the customer needs are incorporated into the design and installation of new plant and equipment.
• Identify areas of weakness in the portfolio of processing technologies (plant and equipment) and submit proposals to address these.
• Define and seek approval for the detailed project scope of plant and equipment projects, and obtain approval for capital orders and PIP's.
• Review and make recommendations on design proposals put forward by contractors, project engineers, and equipment suppliers.
• Organise HAZOP studies, act as technical recorder, and issue HAZOP report for all installations where appropriate.
• Issue commissioning programmes, lead commissioning activities, and issue final reports.
• Carry out pre-delivery inspection visits for new equipment, prior to acceptance on site.
• Compile equipment WIs.

Knowledge, Skills & Experience

• Min A level certification
• Experience in pharmaceutical industry
• Experience in pharmaceutical process
• In depth working knowledge of the safety and compliance requirements for equipment and systems used in it.
• Strong written and verbal communication skills.
• Ability to multi-task and prioritize workload

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Job Responsibilities:

• Design Gas Compression package, Power Generation package, Process Module (dehydration, refrigeration, seawater treatment system, etcs), for oil & Gas production facilities, ie FPSO, FPU, offshore fixed platform, etcs.
• Coordinate with other engineering disciplines to ensure compliance with standards (API, DEP, etcs) and clients’ specifications.
• Collaborate with clients and principals for design optimization.
• Participate in technical meetings (Hazop, Technical Clarification meeting), may require overseas travel.
• Any other ad-hoc as assigned

Job Requirements:

• Minimum Diploma / Degree in Chemical Engineering or Mechanical Engineering.
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• In house & overseas training will be provided if required.
• Able to work independently in a flexible, dynamic and fast-paced environment.
• Positive working attitude.

Working hours: 8am to 5pm

Transport provided at the nearest MRT.

For keen applicants, please email [email protected]

About the role

This position involves applying knowledge in engineering and science to design & develop scale up processes in the laboratory and future production of our aerogel line of products. Successful candidate will be given a fulfilling role to work in the company’s state of the art platform technology, ASPIRe. As a valuable member of the team, you will be involved in every aspect of the development from infancy to the implementation

Process Engineer

Locations: 8 Cleantech Loop, #08-37 Singapore 637145 .CleanTech 3

Working Days: 5 days a week

Time: 9 - 6 pm

Basic Salary ranges from $4500 to $5500 (Depending on qualifications and experience).

Other benefits include transport allowance and basic medical coverage, annual leave, paternity/maternity and compassionate leave.

Roles & Responsibilities

• Assist Production Manager in the daily running of production department.
• Design and develop the pilot process plant for upscale production.
• Develop product testing protocols and procedures based on product specifications to test and determine the full operating profiles.
• Lead in troubleshooting of process equipment and machinery when required
• Assess processing suitability according to varying criteria including performance, ease of manufacturing, reproducibility, and scalability
• Consolidate operating parameters and other observations in a clear and structured format/template
• Develop framework and manage safety records such as SOP, SWP, GMP and RAM.
• Work closely with the formulations and product development team to achieve optimization in processes in terms of efficiency and cost.
• Carry out quality control for in-house development and customer samples
• Work closely with business team and customers/industry partner for pilot trials, implement their feedback and improve existing product to achieve customer specification.
• Development of a suitable manufacturing process for the product formulation.
• Production of sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches
• Work closely with other departments to validate manufacturing methods for production scale batches.
• Train production personnel on manufacturing processes.
• Trouble-shooting in the process matrix for routine production.
• Maintain and document quality records with regards to processing units and machinery.
• To establish and maintain Good Manufacturing Practices for all commercial projects.
• Mentor and manage junior staff.
• Prepare progress update and presentations
• To ensure all GMP quality related records are kept properly

Requirements

• Have a Bachelors / Masters in chemical engineering, mechanical engineering, industrial engineering or a related field
• Have knowledge on process design software such as CHEMCAD, CHEMPRO, AspenPlus and/or other related software.
• Have a good knowledge of industrial processes and best practices in chemical plants.
• Have a good knowledge in HVAC systems
• Self-directed learner, ambitious with desire to succeed and positive attitude towards learning
• Experience in coatings/paint would be advantageous.
• Good knowledge of chemical handling.
• Project Management expertise

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘process engineer’ in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, residential status in Singapore, details of your educational background and work experience.

(A) Primary Function

1. Responsible for all engineering related activities of the product line concerned.

2. Responsible for quality of products at all stages and drive production yield.

3. Identify and initiate actions to prevent occurrence and recurrence of product, process, quality systems nonconformities.

4. Work as a team with all departments to achieve mutual agreement on specification required by customers.

5. Ensure all products meet the standard cycle time and minimise machine and mold down time.

6. Implement improvement plans to enhance efficiency of process, material and manpower.

7. Responsible for new RFQ enquiry and advise the management the feasibilities for mass production.

8. Responsible for resolving discrepancies and technical issues related to product with customers.

(B) Duties and Responsibilities

1. Establish optimum process parameters and meeting specific cycle time for new product.

2. Analyze defect reported in-house and customer with quality, tooling and production.

3. Responsible to test and qualify all new molds by applying systematic molding that includes Load Senstivity Test, Viscosity/Shear Rate Test, Gate Freeze Test, Thermal Mapping of Mold, Short Short Test etc.

4. Must perform DOE on molding process parameter for process window study.

5. Attend to all daily quality and process related issues.

6.Prepare and execute process validation protocols and reports for new and existing products with tooling and quality personnel for all customers.

7. Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

8. Perform internal quality system audit.

9. Train and assess production staff on processes as well as WI as and when required.

10. Attend routine production and quality meetings.

11. Execute engineering change notice from customer/ in house and update ERP system promptly.

12. Compliance to all regulatory and in house system requirements especially for medical and automotive customers.

C) Qualifications / Requirements

1. Degree/Diploma in Engineering-related discipline, preferably in Polymer and Plastic technology, Mechanical.

2. At least 3 years related experience/knowledge in Plastic Injection Molding, preferably in medical and automotive industries.

3. Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.

4. Possess strong leadership, positive attitude, analytical and good interpersonal skills.

5. Results-oriented, meticulous and a self-motivated team player.

Job Description

• Review engineering drawing & specifications, design and execute engineering experiments, calculations and statistical control for new products & processes
• Delivering engineering activities to support and improve the company’s manufacturing & supply chain operations.
• Ensure manufacturing processes are capable of meeting and continue to meet quality, cost, delivery rate and lead time requirements to customers.
• Perform trouble shooting & analysis of production & process issues. Perform process redesign where required.
• Identify opportunities for new or improved processes to meet current or future requirements.
• Perform new equipment & materials validation using standards involving IQ, OQ & PQ methodology.
• Source new suppliers, qualify specifications & perform cost estimation to price out project expenses.

Experience

• General awareness of Manufacturing Systems e.g. CAD, CAM, CAPP, Manufacturing Execution System, ERP & Technical Publications.
• General experience with work flow Simulation software & Robotics applications e.g. Flexsim & UiPath.
• Experience with write-ups on work procedure workflow & instructions for production process.
• Experience with statistical process control & other quality/performance control tools.
• Ability to apply ISO13485, GDPMDS & other ISO standards to existing operations & into new businesses.
• LEAN/Six Sigma practitioner.
• Knowledge of ISO requirements.
• Knowledge on end-to-end processes from technical/material qualification, supplier audit, process qualification to manufacturing & supply chain logistics engineering.
• Resourceful, able to independently conduct research & apply new solution to business requirements.
• Proven Project management skills.
• Good presentation skills.
• Independent, self-motivated, process oriented & analytical.

Summary:

• Basic up to $3500 + AWS + VB
• Full time position
• 5 working days
• Tuas

Responsibilities:

• Act as the technical point of contact for new product development and implement improved processes.
• Perform hands-on testing, process development, and troubleshoot issues using scientific moulding principles to enhance efficiency and quality.
• Develop and document moulding processes, including technical documentation like FMEA, validation protocols, and engineering reports.
• Trial, evaluate, and modify new tooling and equipment to meet quality and production standards.
• Collaborate with customer engineering teams, internal teams, and vendors to align designs with manufacturing processes and business objectives.
• Participate in improvement activities, provide cost inputs for quotations, and support development efforts, including travel for onsite testing and knowledge transfer.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at www.rkgroup.sg

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Duties & Responsibilities

1.Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.

2. Implement Process Improvement idea via Management of Change system and/or Non-regular work system.

3. Coordinate, arrange and plan new grade trial run with R&D and Operation team, and handle the trial run and the evaluation.

4. Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to plant instability, safety or quality issues.

5. Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.

6. Participate actively in HAZOP , FMEA and Control plan studies as Process engineering function for safety and quality improvement.

7. Oversee Process related capital expenditures project from conceptual design up to Front End Engineering Design (FEED) and Lead the project assigned by (assistant) manager of department.

8. Study and implement Industry 4.0 related technologies as part of Productivity Improvements and Process improvement Projects

9. Participate in Company EHSQ program and cooperate with its promotion and improvement.

10. Collaborates with other departments in Management systems such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC plus as process engineering function

11. Perform study as Process Engineering Function such as NRW, MOC and as per request from other departments.

12. Keep and maintain safe and health work environment.

Requirements

1. A Bachelor / Master’s Degree in Chemical Engineering

2. 3 year(s) of working experience in Petrochemical Industries (Preferred).

3. For Senior position, at least 5 year(s) working experience in Petrochemical Industries.

4. Possession of Singapore Certified Energy Manager (Preferred)

5. Familiarity with Safety Case Regime

6. Familiarity with IATF 16949 standard (Preferred)

7. Familiarity with ISO9001, ISO14001, ISO45001 and SS651.

8. Familiarity with IEC 61511 standard (Preferred)

9. Familiarity with Process Simulation software such as Aspen Plus®, Aspen

HYSYS®.

10. Familiarity with Distributed Control System (DCS), in particular its logic and sequence modification.

11. Able to multi-task and handle a wide spectrum of responsibilities.

12. Good interpersonal skills and strong analytical skills.

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Maintains product and company reputation by complying with federal and state regulations.
• Contributes to team effort by accomplishing related results as needed.

REQUIREMENTS

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Environmental/Health/Safety) or any related field
• At least 3 Year(s) of working experience in the related field is required for this position.
• Possess keen knowledge of water and wastewater treatment technologies and the industry in general
• Able to work independently and a multitasker/ able to cope in a fast-paced environment.

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has set up their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Job Responsibilities

• Support in the setup of manufacturing facility and process documentation
• Build and train Operators in the operations of machinery and maintenance in compliance with GDP, quality and other relevant company’s standard
• Achieve efficiency, productivity, safety, and quality for assigned processes
• Propose solutions to improve productivity and lead time
• Ensure regular maintenance of machineries to prevent machine down time. Monitoring the efficient, feedback to manager and related department
• Responsible for troubleshooting of daily operations issues
• Investigate and implement preventive actions at source
• Leading of yield/productivity improvement or cost reduction project
• Support Production and Final inspection process validation activity in IQ, OQ and PQ, which the validation of mass-production equipment, with approved development specification and plans
• Other activities as assigned by the supervisor

Education Qualification:

Diploma or Bachelor in Engineering (either industrial engineering, system engineering, mechanical, chemical)

Experience:

0 – 4 years or more experience(s) in chemical or medical devices industry

Functional Competency:

• ISO9001 and 14000
• Relevant working experience in process control and manufacturing operations
• Computer literate, proficient at Microsoft office
• Effective communication in English is essential and Japanese is a plus.
• Able to collaborate well within department to execute project tasks.
• Good analytical skills
• Ability to lead and coach team members

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilites

• Facilitate improvement projects initiatives derived from Quality, Process and
  Productivity concerns.
• Initiate process streamline on new device configuration leads to defect prevention.
• Participate with customers status of projects in-line with internal Quality issue improvement.
• Follow-up closely with supervisor & team to monitor improvement project status and closures.
• Perform regular monitoring and audit verification of the committed actionable
• Maintain updating of the relevant QMS system for QA (NPI/QCAR/FMEA/Control Plan).

Requirements

• Degree in Electronics or Engineering or related field.
• Basic knowledge in MS office (Word, Excel, PowerPoint).
• Good communication and interpersonal skills both verbal and written.
• Knowledge in basic manufacturing solving problem tools (8D, FMEA, Control Plan) and statistical tools (SPC) are an advantage.
• Highly motivated to learn new skills / systems / analytical tools used in manufacturing operations.

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Responsibilities

• Analyses drawings & determine physical characteristics of products, special handling, requirements and type of packaging and crating required.
• Required to effectively manage multiple projects with minimal assistance & supervision.
• To identify and implement packaging improvement.
• To support on-site packing when required.
• To do any other ad-hoc duties assigned

Job Requirements

• Min. NITEC/Diploma in Engineering or equivalent.
• With some experience or knowledge in packaging/crating work preferred
• Understanding of ASTM international standards.
• Proficient use of AutoCAD software.
• Able to manage multiple projects in a fast-paced environment with strong project management skills.
• 5 day work week
• Singaporeans only

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Assistant Engineer, Production Process Support is responsible for running engineering evaluations, collecting and compiling of data with simple analysis, and part measurements. The incumbent will also manage change order (CO) activities as well as non-conformance part movements.

This position reports to the Production Process Support Manager and is part of the Manufacturing Engineering department located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Assist in running engineering evaluations
• Perform basic statistical analysis
• Understand and apply the process flow of non-conformance material and product change action

The essential requirements of the job include:

• Diploma/NITEC in Mechanical Engineering
• Relevant experience in lean manufacturing

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives.

The Senior Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role involves managing a team of engineers, collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

To lead the process engineers,

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

General Description

• Responsible as Operation’s facility engineer for the development of Terminal’s new LNG Trucking facility. Incumbent shall support the Project team, ensure the Operability & Maintainability aspects of the new facility are taken care during engineering, design and construction phases. Incumbent shall also develop and execute “Ready to Operate” plans for the facility;
• Incumbent shall work closely as a team with Production Shift Teams, Maintenance Team and other Process Engineers providing process engineering expertise ensuring the Terminal and Trucking facilities operates safely, reliably and efficiently;
• Incumbent shall liaise closely with Commercial team to ensure the Terminal delivers the required services, inclusive of Jetty Operations, Gas supply and Trucking are incompliance to regulations, procedures and contractual agreements

Roles & Responsibilities

The incumbent roles include but not limited to following scope of tasks and duties:

• Evaluate operations activities, make recommendations and execute continuous process improvements in the areas of operational excellence;
• Recruit, train and supervise the Trucking Technicians assigned for operating the Trucking Facility.
• Lead troubleshooting, inspections, reviews and investigations of equipment or process system to support optimisation, drive root cause analysis and formulate remedial resolution. Incumbent shall also investigate Customer’s complaints related to equipment and process systems;
• Review the adequacy of standard operating procedures(SOP) to ensure safe and reliable operations with operational design limitations, includes commissioning, operations and maintenance phases of facilities;
• Provide specific instructions to Production Shift Teams, Maintenance Team, Trucking Team and Laboratory on LNG transfer operations, trucking, stowage plans and samplings requirements;
• Liaise with stakeholders in ensuring LNG surveyor’s reports, certificates of quality are accurate and consistent as per the procedures;
• Diligently review maintenance plans, method statements and risk assessment on the process safety aspects for the maintenance work related to the assigned equipment and systems;
• Compile data and measure Terminal’s performance including service availability and efficiency;
• Undertake alarm management for assigned area and proactively drive alarms analysis to ensure robust operations;
• Take lead role for Management of Change(MOC) for facilities modification, as required;
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, 3D models, Safety Integrity Level, RAM analysis, design layout and process safety requirement in alignment with regulatory and business objectives;
• Report HSSE near miss/violation. Take an active role in HSSE activities and green initiatives;
• Assigned specific role and responsibility in emergency response;

Work Experience

• Minimum of eight (8) years work experience in process engineering function in an oil, gas and petrochemical facilities, complex utility, cryogenic or trucking facilities;
• Conversant with local/international codes, regulations, standards, best practices, equipment inspection and schedule requirements;
• Knowledge of installation, commissioning, start-up, maintenance and troubleshooting of processes system in oil, gas or petrochemical industry;
• Knowledge of Process Safety Management, Electrical, Instrumentation, Controls or Mechanical systems;
• Experience in Process Simulation (e.g. Hysys/Unisim or equivalent), Design Softwares(e.g. Fisher Specification Manager, Hydraulics, PSV sizing) or other related process software an advantage;
• Experience in Engineering design analysis including preliminary design development, heat and mass balance calculation, technology evaluation and equipment selection preferred;
• Experience in dealing with consultants and contractors involved in the Oil & Gas sector, including external agencies, utilities and government organizations;
• Basic knowledge of ship-shore interface and cryogenic transfer operations an advantage;
• Capable of lead and guide technicians ensuring the works are executed safely and effectively;

Education

• Incumbent must possess a Degree in Chemical Engineering from a recognised university.
• Process Engineering background with Mechanical and Instruments knowledge.

Why Patients Need You

Our breakthroughs would not make it to the hands of patients without our pharmaceutical manufacturing team. We rely on a team of dedicated and agile members, who understand the importance and impact of their role in Pfizer’s mission. Patients need colleagues like you who take pride in their work and always look to improve outcomes. You will help to ensure that patients and physicians have the medicines they need, when they need them.

What You Will Achieve

You will be operating automatic and manual chemical process equipment of varying complexity in various production processes in accordance with operating procedures. You will perform quality control analyses as required to complete in-process batches and identify variations. You will be trained in hazardous material handling and emergency procedures as these processes may generate high pressure and/or critical reactions.

As part of technical operations, you will be a team member who is relied to have a good understanding of procedures, techniques, tools, materials and equipment. Your decision making will help you prioritize workflows based on the available resources. You will follow standard procedures to complete tasks, some of which may vary in scope, sequence, complexity and timing. You will contribute to the team’s success by sharing your previously acquired knowledge.

It is your hard work and focus that will help in making Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Manage own time and professional development, be accountable for own results and prioritize own workflow.
• Operate automatic and manual chemical process equipment of varying complexity in various production processes in accordance with operating procedures.
• Perform duties required in operating a variety of equipment used in your assigned area of the division, maintaining responsibility for tasks as assigned.
• Operate process equipment, such as filter presses, pumps and agitators.
• Participate in quality and safety incident investigation.
• Troubleshoot all operating deviations and issues and coordinate with other function when required.
• Complete all documentation according with Good Manufacturing Practices {also cGMP} and Good Distribution Practices {part of GxP} standards.
• Responsible for preparation and clearing of equipment for maintenance work.
• Perform material receiving, staging, transfer, dispensing, sampling, and charging operation.
• Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process.
• Maintain Pfizer standards and values for quality, safety and environmental objectives as well as meeting production goals.
• Complete all trainings by attending scheduled training.

Qualifications

Must-Have

• High School Diploma or GED
• 2+ years of experience
• Knowledge of industry practices and standards
• Ability to work in a team environment and have good interpersonal skills is essential.
• Effective written and oral communication
• Computer Skills, such as Microsoft Applications and experience with System Application & Products

Nice-to-Have

• Bachelor's Degree
• Experience in a chemical or formulation manufacturing environment

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are “Solar’s most trusted”!

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.
• Support production line issues with appropriate and permanent corrective solution, as and when necessary.
• In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.
• Support investment proposals and projects in order to utilize best available practice and competence.
• Support managements’ directives and projects as and when needed.
• Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Module PD Engineer

• Candidate working in Module PD is responsible for development of the bill of materials (BOM) used in the PV module.
• Responsible for redesign of parts for cost and process improvement through alternative components, parts reduction, jigs and fixtures, and increasing yield, reducing cycle time and improving quality
• Excellent knowledge in material structure performance and provide direction of how best the appropriate materials could be introduced and change to meet the overall cost targets.

Knowledgeable in establishing, sourcing and developments of new materials, new designs and alternative vendors (such as Glass, EVA, Back Sheet, Frame, junction box, etc.) to meet the overall process, production and cost improvement targets.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline )
• 3 years or more experience for engineer position
• 7 years or more experience for senior engineer position
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or Solar.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

• 5 days, Boon lay, Transport provided to & fro
• $4000 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Jurong West, Transport
• $3800 - $4500, AWS, performance bonus
• Medical/dental benefits

Job Description

• Review engineering drawing & specifications, design and execute engineering experiments, calculations and statistical control for new products & processes.
• Perform trouble shooting & analysis of production & process issues for cleanroom & non-cleanroom operations. Perform process redesign where required.
• Support qualification & setup (where applicable) of new materials, recipe, processes & system application for both cleanroom & non-cleanroom operations.
• Perform new equipment & materials validation using standards involving IQ, OQ & PQ methodology.
• Source new suppliers, qualify specifications & perform cost estimation to price out project expenses.
• Support new business projects & technology implementation.
• Research, Procure, Qualify & Implement new solutions (equipment or materials).

Job Requirements

• Possess a Diploma or Degree in Engineering
• Minimum 2 years of working experience
• Knowledge on end to end processes from technical/material qualification, process qualification to manufacturing & supply chain logistics engineering.
• General awareness of Manufacturing Systems e.g. CAD, Manufacturing Execution System, ERP & Technical Publications.
• General experience with work flow Simulation software & Robotics applications e.g. Flexsim & UiPath.
• Experience with write-ups on work procedure workflow & instructions for production process.
• Ability to apply ISO13485, GDPMDS & other ISO standards to existing operations & into new businesses.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Boon lay, Transport provided to & fro
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Senior Manager (Process Development) in Singapore.

Senior Manager (Process Development)

What you will do

The successful candidate will apply subject matter expertise to support technology transfer and ongoing cGMP production of commercial protein biologics processes. Scope of work could include:

• Lead site PD activities for continuous improvement, productivity improvement, and product life cycle management.

• Lead and manage PD safety and compliance initiatives including inspection readiness.

• Manage and oversee PD related projects, ensuring they are completed on time, within scope, and budget. Analyze project outcomes to identify areas for improvement and drive continuous optimization.

• Represent PD on key projects or business processes.Stay abreast of industry trends and leverage expertise to ensure the success of the Amgen Singapore Site, focusing on reliability, efficiency, agility, and differentiation.

• Collaborate with cross-functional teams and network drug substance teams for process alignment by applying advanced technical principles and concepts.

• Site PD champion for digital literacy and new digital tools deployment for process monitoring, tech transfer, and facility modeling. Apply best practices to leverage data for more proactive and predictive approaches.

• Support regulatory filings, audits and inspections, and other CMC activities.

Win

What we expect of you

Basic Qualifications

· Doctorate Degree and 2 years of biologics process development or commercial-scale technical support experience Or

· Master’s Degree and 6 years of biologics process development or commercial-scale technical support experience Or

· Bachelor’s Degree and 8 years of biologics process development or commercial-scale technical support experience

Preferred Qualifications

· 6+ years in a technical role supporting manufacturing processes or 8+ years as a project manager for cross-functional teams within regulated environments (i.e., cGMP)

· Strong oral and verbal communication skills, interact effectively with diverse internal and external (suppliers) stakeholders.

· Knowledgeable in regulatory filings authoring and inspections. Experienced in biopharma product end to end lifecycle management (e.g product team lead).

· Familiarity in MoF single use facility operational aspects of commercial biopharma manufacturing and proficient in big data analysis.

· Working experience with capital / engineering project from early stage to project turnover.

· Stakeholder Communication: Maintain clear and effective communication with all project stakeholders in multicultural working environment, including providing regular updates and managing expectations.

· Agility and Learning: Promote a culture of agility and learning within project teams, encouraging innovation and adaptability in a dynamic business environment.

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

About our group:

We are a dynamic process team to provide sputter engineering support to hard disk media production with the objective of ensuring compliance and conformance to process procedures.

About the role – you will:

• Provide engineering support to production line by ensuring process flow, specification, procedure and documentation.
• Monitor any variables within the process and make the adjustments when required.
• Quick and effective diagnosis and troubleshooting of routine or minor problems.
• Perform process buy-off after equipment preventive maintenance or breaks down.
• Document routine manufacturing processes and report data for shift duty pass-down.
• Conduct or assist the process engineer in carrying out experiments with the objectives of process improvement.
• Continuous improvement on OEE.
• Training and certification for MS and new EA personnel
• Assist in Audit preparation

About you:

• Diploma in Mechanical, Electrical, Mechatronic Engineering, or related Engineering Diploma.
• Self-motivated and positive working attitude.
• Team player with good problem-solving skill.
• Willing to work in clean room environment.
• Willing to work on 12hr (7.30pm to 7.45am) night shift pattern

Your experience includes:

• Fresh graduate welcome
• Relevant experience in the manufacturing industry will be an added advantage
• Possess of Sputter knowledge will be an added advantage

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass-transportation to work. Ample free on-site parking is also available. Here at work you can enjoy breakfast, lunch, dinner and snacks at our on-site canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound