1. Packing of finished product into paper bags weighing 20kg to 25kg
2. Stacking of finished product packed in paper bags onto wooden pallets
3. General housekeeping of work area
4. Ad hoc duties as assisgned by supervisor
5. Candidate will be trained to run production of chemial processes when more experienced
6. Protective gear must be worn during work (E.g. safety helmet, mask, ear plugs, gloves, safety boots)

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

· Involve in hands-on execution of the plant operations and assist Manufacturing

· Associates in troubleshooting

· Monitor and analyse processing parameters for atypical trends and improvement opportunities

· Perform solution and equipment preparation

· Stage components for autoclaving and washing

· Support in-process testing of production samples, prior experience with analytical instrument will be a plus point

· Actively support continuous improvement initiatives

· Support Safety audits

· Adhere to any applicable EHS and regulatory requirements

· Ability to follow written procedures, recognize and report malfunctions

· Evaluate documentation/data according to company and regulatory guidelines

· Engage & interact with inspectors (internal and external)

· Interpretation and application Good Manufacturing Practice (GMP) knowledge is required

· Basic statistical mathematical skills

· Ability to organize work and handle multiple priorities and meet deadlines

· Need to understand, apply and evaluate basic chemistry, biology and physical principles

· Understanding of analytical methods

Basic Qualification:

· Diploma in Science or Engineering

Preferred Qualification:

· NTC/ITC/Diploma in Chemical, Pharmaceutical, Life Sciences or Bio-processing related disciplines

· Fresh graduates are strongly encouraged to apply.

· Proficiency in reading and writing English

· Demonstrate commitment to cGMP, EHS compliance aspects of clean-room plant operation, prior experience and demonstration of cGMP knowledge is a plus

· Knowledge of plant and unit operations (autoclave, parts washers, process equipment), good problem-solving skills

· Excellent self-motivated team player with hands-on attitude and good communication skills

· Experience with Emerson DeltaV, LIMS, TrackWise

· Should understand, apply and evaluate basic chemistry, biology and physical principles

· Required to work any shift in support of operations that may include 24/7

· Mechanical ability/expertise

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a SOP Writer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

• Drafting SOPs in clear, concise language, ensuring consistent and user-friendly formatting.
• Work with relevant stakeholders, such as department heads, supervisors, and quality assurance teams, to review and update SOPs as necessary.
• Assist in developing training materials based on SOPs to ensure employees receive proper training on procedures.
• Engage in continuous improvement initiatives by identifying opportunities to streamline processes, enhance clarity in SOPs, and improve operational efficiency and effectiveness.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

JOB SUMMARY:

Coordinate Gradiant Field Construction and manage Operation activities in Singapore and in Southeast Asia (as long as travels reasonably allow). Responsible for the Coordination, Operations, and Maintenance of Gradiant systems during construction, commissioning, operations and defect liability period phases. Represent Gradiant locally in compliance with Company culture and standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

• Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.
• Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.
• Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.
• Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.
• Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.
• Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.
• Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.
• Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.
• Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.
• Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.
• Monitor compliance with contractual and regulatory requirements.
• Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.
• Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.
• At least 2 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.
• Familiar with various water and wastewater technologies
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities
• Reliable, well organized, and detail-oriented
• Fluency in English
• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)
• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants
• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.
• Pays attention to detail, identifies & solves complex issues.
• Checks work for quality.
• Shares suggestions to improve quality & productivity.
• Works independently with minimal supervision.

Main Duties and Responsibilities

We are seeking experienced and highly technically proficient individuals to join us as Duty Engineers. Joining as part of the Mandai Rainforest Resort by Banyan Tree’s pre-opening team, our Duty Engineers will be responsible for ensuring the smooth operations and maintenance of the Resort’s facilities, including all technical systems.

Key Responsibilities

• The Duty Engineer will conduct regular inspections of the Resort to determine maintenance requirements, upgrades and improvements. In performing this role, the incumbent will be responsible for reporting any incidents to the Assistant Chief Engineer.
• Resolve any maintenance matters reported by guests or staff. This includes coordinating with the Front Office and Housekeeping with regards to specific maintenance activities and ensuring that any identified matters are resolved in an efficient and timely manner.
• Responsible for ensuring that all rules and regulations regarding safe working practices are complied with.
• The Duty Engineer will also conduct the needed preventive maintenance activities when required. This includes liaising with the Assistant Chief Engineer to ensure the necessary inventory, spare parts and other equipment are readily available.

Job Requirements

• Diploma, Higher NITEC, NITEC in Electrical, Mechanical, Plumbing or an equivalent professional certificate.
• Minimum 3 to 5 years’ experience in a similar capacity, preferably in the hospitality industry. Pre-opening experience would be useful.
• Able to work and coordinate with contractors in all work-related activities.
• Able to commit to after office hours duties when required and/or shift work.

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Process in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Process, you will:

Provide engineering support for sustaining production and projects in the Medical and Life Sciences sectors. Responsibilities for sustaining production include quality, productivity, and process improvement. Project work may involve process development, characterization, and production start-up. Ensure all documentation complies with ISO13485 or respective product documentation requirements.

The key responsibilities are as below:

• Lead and provide engineering support and solutions for sustaining production and projects.
• Lead, participate in, and support projects such as line transfer and setup, process development, or automation.
• Provide timely engineering support to ensure the production line runs smoothly and meets operational goals.
• Collaborate closely with production teams and customers to resolve line quality issues.
• Improve and ensure line processes are controlled using SPC, Cpk, FMEA, and other statistical tools.
• Ensure proper maintenance of equipment and achieve uptime/OEE targets.
• Initiate, lead, and implement yield and productivity improvement projects.
• Write IOPQ protocols, perform validations, and manage reporting and documentation.
• Generate and maintain Assembly/Maintenance Work Instructions.
• Implement changes on the line through Engineering Change Notices (ECN).
• Provide training to Technicians and Operators.
• Ensure the production line complies with the ISO 13485 Quality System.

What skills and experiences are we looking for?

• Degree in Mechanical, Mechatronics Engineering, and/or equivalent experience.
• Knowledgeable in SPC, DOE, DFMEA, or plastics bonding process for assembly of medical devices.
• Experience in performing IOPQ protocol and validation or process development.
• Experience working with automated assembly line or supplier on automation project.
• Strong analytical and problem-solving skills, detail-oriented.
• Strong leadership qualities, independent, and a team player.
• Excellent communication and interpersonal skills.
• Enjoy working in cross-disciplinary teams.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Job Description

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical role in developing and modifying process formulations, methods and controls to meet desired quality standards. Your production engineering skills will help in recommending and implementing improvements, modifications or additions that will help in solving problems. You will review product requirements in terms of product development compatibility and help Pfizer determine optimum costs and schedules of production.

As an associate, your focus on the job will contribute in achieving project tasks and goals. It is your domain knowledge, commitment, collaboration and dedication that will help us achieve new milestones and patients across the globe.

How You Will Achieve It

• Contribute to the completion of project milestones, organize own work to meet project task deadlines and communicate progress on scheduled projects.
• Lead or support major equipment related investigations and implement equipment corrective or preventative action and performance improvements.
• Organize testing associated with the development of new process technologies and the support of new product introductions and tech transfers.
• Ensure integrity and compliance of data according to Standard Operating Procedures.
• Coordinate all work on scheduled projects (personnel activities, documentation and outside resources).
• Perform other tasks necessary to support site compliance to Center and regulatory requirements.
• Support cleaning program by performing swabbing and visual inspection of equipment.
• Assist in document preparation and training.

Qualifications

Must-Have

• Bachelor's Degree
• Demonstrated ability to provide technical solutions for complex problems through equipment and process understanding
• Working knowledge of Food and Drug Administration Regulations, and Good Manufacturing Practices
• Proactive, has experience with high performance teams, strong interpersonal and project management skills
• Strong written and verbal communication skills
• Microsoft Applications skills

Nice-to-Have

• Demonstrated experience in a relevant manufacturing environment
• Knowledge and experience with Drug Product processing and equipment

• Position: Service Engineer (Crane/Heavy Equipment Industry)
• Location: Tuas (company transport provided)
• Working hours: Monday to Friday (8.30am - 4.30pm)
• Salary (commensurate with experience): Up to $4,000 + OT Payable + AWS + Performance Bonus + 14 Days Annual Leave + Transport Allowance + Meal Allowance
• Duration: Permanent
• Industry: Equipment & parts distributor (MNC)

Main Responsibilities:

• Product delivery training to distributors and customers
• Provide diagnosis guidance and analyzing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue
• Furnish warranty claims and quality report to drive quality improvement on our products
• Any other ad-hoc duties assigned

Requirements:

• Minimum Diploma in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess a valid Class 3 Driving License
• Will involve travelling to other countries within Asia, entitled to travelling allowance

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Occupation

Accounts Executive

Job Description:

• Handle Full set of Accounts both payables and receivables
• Bank reconciliation, financial reports, quarterly GST, CPF Submission, invoicing, payroll
• Have hands-on experience in MYOB accounting software and proficiency in MS Excel
• Timely preparation and closing of accounts
• The daily activities of an accounting payable and receivable and all other accounts-related duties

Job Requirements:

• Atleast 2 years of working experience in Accounting
• Minimum of Diploma in Finance/Accounting/ Banking or equivalent
• Proficiency in MYOB accounting software
• Open-minded and strong team player

General Summary

Currently, we have a great opportunity available for an Chemical Operator, ETP to join our Production Team/Group/Dept. This position will be located in our Singapore branch and will report directly to the Production Engineer. The ETP operator is responsible for safely and efficiently operating all equipment necessary to manufacture atmospheric emulsions, reactor batches, pilot batches, and cold-blend products. This position is also responsible for performing quality control testing, packaging product for shipment to customers.

Primary Responsibilities

· Communicate with Shift Team Leaders and Production Engineer regarding safety, production, quality, or any other operational issue

· Manufacture batches in accordance with all safety, quality, and efficiency standards by following work orders and verbal directions

· Safely and efficiently operate reactors, emulsion kettles, Cowles mixers, homogenizers, heat exchangers, pumps, filtration devices, automated packing stations, forklifts, and other equipment related to the manufacture of chemicals

· Correct packaging of finished goods into pails, drums or totes as required.

· Efficient operation of the wastewater treatment plant, soft water process and boiler operation when necessary

· Use equipment to monitor pressure, temperature, and other hazardous conditions

· Monitoring of SCADA systems

· Execute process parameters warning alarm systems

· Wear proper Personal Protective Equipment (PPE) when required

· Perform quality control testing and adjust batches to ensure specifications are met through water adjustments, debugs, reheats, etc.

· Perform required calibrations on equipment in accordance to ISO procedures

· Ensure accurate documentation and inventory accuracy in accordance to established doctrine

· Use all equipment safely and ensure safe operation of equipment by coworkers

· Maintain clean work areas in accordance with 6S protocol

· Assist in the manufacture of new products and establishing procedures

· Prepare sample as per customer request

· Assist in the prevention of quality problems and the establishment of solutions for existing issues

· Perform related duties as assigned or as the situation dictates

· Live our Values & Behaviors

· Collaborate effectively within a highly matrixed global environment

Other

· Perform related duties as assigned or as the situation dictates.

· Must be able to climb stairs, stand for extended periods of time, and safely lift up to 40 kg

· Must be able to wear required Personal Protective equipment (PPE) for extended periods of time

· Must be able to pass Pulmonary Function Test

· Must be able to operate forklift safely

· Must show proficiency in the operation of all necessary equipment

Critical Competencies, Knowledge, Skills, and Abilities

· Basic math and computer application skills

· Basic mechanical maintenance & troubleshooting skills (eg, mixer, motor & pump) will be a plus

· Knowledge of SCADA, PLC Programming & DCS system will be advantageous

· Ability to think independently and handle tasks through to completion in an efficient manner

· Ability to adapt to changing demands and to react positively to verbal instructions given by a Team Leader or other superior

· Excellent oral and written communication skills

· Proven ability to follow procedures and handle multiple tasks, effecting a positive outcome

· Willingness to work in a team environment

Education and Experience

· “ITE”/ Diploma level

Work Hours

Michelman’s standard work hours for this role is a 12 hours rotating shift, day shift will start from 7am to 7pm and night shift will start from 7pm to 7am.

Responsibility:

-Drive and manage region E programs in PROCT ADT, focus on NPI Region E Yield, Quality, Cost improvements.

-Optimizing wafer bevel/backside and overall stress management

- Co-work with PEE and module owner to improve process cross wafer uniformity on NPI.

- RegE yield ramp up for NPI, co-work with TD/APD, PI/YE, device, RAM team to create regE yield detractor pareto and drive activities.

-RegE Quality improvement for NPI, co-work with PEE/PI/YE to reduce WTW/LTL and WIW variations.

- Development new methodology to characterize for improving regE health.

Requirements:

• Bachelor’s/Master’s in chemical/material/mechanical engineering or relevant field with min 10 years working experience in semiconductor.
• Deep understanding of the DRAM/NAND process flow.
• Strong desire and creativity to explore process and control improvements.
• Understanding of the Micron world-wide team structure, standards, and processes
• Knowledge of Micron’s Process control methods and direct experience with general line sustaining within the area
• The ability to train on process lessons learned, defect issues and BKM's
• Strong team player with the ability to clearly communicate with content experts – written and oral (via conference calls)
• Working knowledge of data analysis systems and SWR systems
• Proven ability to set, measure and achieve short and long - term goals.
• Demonstrated success in leading cross functional (RnD,Mfg) teams (preferably WW) in defining and solving process problems

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned

Requirement:

• Bachelor’s Degree in Civil Engineering or equivalent
• Able to lead and work independently
• Proficient in Microsoft Office and AutoCAD
• Good communication skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

• Monitor the quality of extrusion fabrication outputs and safety of extrusion operations
• Trains and reinforces employees on machine operation, safety and company policies
• Inspect fabrication outputs to check for inconsistencies and deviations from established quality standards
• Maintains fabrication workflow, processes and types of machinery
• Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines
• Ensures that production is being accomplished as per production schedule and specifications
• Monitor team and work procedures to meet production schedules
• Provide direction for project tasks and hold all team members accountable for safety, quality and production
• Conduct daily briefing with the crew to review production goals and performance feedback

Qualifications and Requirements:

• Minimum of 3 years experience as a production engineer in a construction or manufacturing environment
• In-depth knowledge of extrusion procedures, equipment, and WSH guidelines
• Able to read and interpret construction blueprints and shop drawings.
• Problem-solving abilities
• Able to use a variety of material handling and fabrication equipment.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Experienced in the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities:

• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals/drawing for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Minimum diploma in Manufacturing / Electrical /Mechanical / Engineering discipline.
• Minimum 5 years working experience in manufacturing environment.
• Willing to work after working hour or during non-working days.
• Able to work under pressure.
• Computer literate. Autocad is an advantage
• Knowledge in ISO is an advantage.
• Able to start on short notice / immediate.

Responsibilities:

• Prepare & conduct quality inspections, coordinate for non-destructive testing & implement QA/QC management system at site
• Distribute relevant QA/QC documentation to site subcontractors
• Compete site quality control instructions and action remedial responses
• Coordinate with site / client on all quality issues coordinate and attend the QA/QC site weekly meetings
• Consult QAQC Lead on all nonconformance reports and undertake remedial action
• Participate in the quality internal and external audits

Requirement:

• Min. 1 - 3 years of relevant working experience, preferably in QA/QC and commissioning of mechanical systems
• Min. Diploma in Mechanical Engineering or equivalent
• Possess Certified Welding Inspector (CWI)
• Well versed in Universal Standard codes such as ASME / API / AWS / NACE & DSEN

Job Description

• Responsible for analyzing and evaluating current systems and work processes
• Identifies areas for improvement and develop innovative solutions to improve operations efficiency, productivity and cost savings
• Documents processes, procedures and work instructions
• Responsible for downstream production and resources planning
• Prepare monthly reports for management meeting
• Perform other work related tasks as and when assigned

Requirement

• Bachelor’s degree in Industrial Engineering, or related discipline and/or equivalent experience
• Preferably 5 years of related work experiences
• Good analytical and presentation skills
• Excellent written and verbal communication skill
• Ability to solve problems and address root causes
• Committed, good team player with strong interpersonal skills and multi-tasking capability
• Ability to be self-motivated and work effectively with minimal supervision

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

What do we have to offer?

Our IT Team presents phenomenal opportunity for a highly motivated and results-oriented individual. Join us in the adventure to explore innovative technologies to run state of art, operationally efficient and secure datacenters.

Looking to advance your career?

Micron is the place for you to expand your caliber by working on major projects, developing the leader in you! We provide online learning opportunities and on-the-job training to upgrade your skills.

What’s more? We provide peer mentorship to guide you through the process of learning new systems.

AN ORDINARY DAY OF WORK WOULD INCLUDE THE FOLLOWING:

• Involving in the application lifecycle management for software systems in a highly automated semiconductor manufacturing environment.
• Working with partners to conduct user requirement analysis and collaborate with global IT team to implement and deliver IT solutions for Manufacturing operations.
• Planning and leading user training and acceptance testing/verification for new software to ensure a good quality software release to production.
• Performing applications software and hardware maintenance to ensure high uptime
• Supervising system performance actively to identify abnormalities and develop capabilities to prevent unscheduled downtime.

THIS JOB IS FOR YOU IF YOU:

• 0-2 years experience, Possess a Bachelor’s Degree in Electrical & Electronics/Computer Engineering, Computer Science
• Knowledge in any programming language such as C#/C++ programming, Java, Perl, HTML5 and SQL.
• Creative and have passion in implementing innovative IT solutions to tackle meaningful business problems.
• Good interpersonal and communication skills. Willing to work in a clean room work environment and dynamic team environment to achieve a common goal through effective collaboration and dedication.
• Able to provide 24/7 standby operation support.
• Able to travel when required.
• Applicant who have proven good software project management skill and had exposure to agile development methodology will be advantageous.

As a Software Development Engineer at Micron you will configure, develop, maintain and support Micron and third party applications. You will create and analyze software specifications, and research, design, document, modify, and support software throughout the development life cycle. You can demonstrate the functional and technical skills necessary to switch between development technologies and merge them to deliver the best solution. You have a proven ability to create quality software and participate in quality improvement efforts. You will provide solutions that create business value while at the same time minimizing negative impact through defects, downtime, or performance degradation

Micron is a world leader in innovative memory solutions that transform how the world uses information. The Engineering and Technology Development (ETD) team is a worldwide organization in Micron, located in US, Taiwan, Singapore, India, etc. The team consists of people from different countries, cultures, and as a result, we're known for our innovative, inclusive, and diverse culture.

As a Software Development Engineer at Micron ETD, you will work in a diverse software agile development team collaborating with teams across globe to deliver innovative solutions to achieve our business objectives.

We believe in People, Innovation, Tenacity, Collaboration, and Customer Focus. Join us if you are likely minded, having fun and grow together!

Responsibilities:

• Build IT solutions to address business problems or create new business opportunities.
• Engage in user requirements collection, discussion, and analysis.
• Participate application lifecycle management (plan, development, test, deploy & maintain) for software systems in a highly automated semiconductor manufacturing environment.
• Apply software development standard methodologies to write clear and quality code, involve in code review, software quality assurance testing, continuous integration, and delivery.
• Plan and coordinate worldwide software releases, provide user and operational training, and support user acceptance testing (UAT) to ensure a good & smooth software release to production.
• Enable system performance monitoring to identify abnormalities proactively and develop capabilities to prevent unexpected system failures.
• Perform scheduled applications software and hardware maintenance to ensure high uptime.
• Provide continuous software operational support such as system recovery, bug fixes, and feature enhancements.

Qualifications & Skills:

• Bachelor’s/master’s degree in computer science/computer engineering/engineering with 0-1 years of total experience.
• Creative and have passion in implementing innovative IT solutions to solve challenging business problems.
• Required to provide 24/7 standby operation support on rotation basis.
• Knowledge in any programming language such as C#, C++, SQL, Python, Java, JavaScript
• Knowledge in big data engineering/Cloud such as NiFi, Kafka, Google Cloud Platform, Azure, Docker/Kubernetes, or Industrial Internet of the Things (IIoT) will be advantageous.
• Applicant who demonstrated good software project management skill and had exposure to agile development methodology will be advantageous.

Job Description & Requirements

1. Ensure that the Inspection department approves fittings, ducts, water pipes, and other accessories before the installation begins.
2. Deliver all tools required for the fitting including power tools, hand tools, scaffolding, and ladder on time and in the exact numbers as mentioned in the list.
3. Prepare, apply, and get approval for the HVAC shop drawings, work method statement, MEP-coordination drawing, and project specification from the head engineer.
4. Coordinate installation schedule with team members and other departments working on the project.
5. Monitor site activities and make sure all rules and regulations are followed. Making reports on daily progress made at work and ensuring it reaches the superiors.
6. Ensure safe construction of heating, ventilation, and air conditioning maintenance according to rules and regulations set by the safety policy manual by the company. They will have to ensure the protection and safety equipment is 100 per cent tried and tested for safe use.
7. Arrange labor and other professionals including pipe fitter, duct fitter and assistant duct fitter. They also act as a supervisor for the installation and maintenance project.
8. Additional responsibilities include having to arrange for the safety gear and equipment they need to do their work.
9. Documentation of the Conduct Testing inspection process for a variety of tasks including the light test for ducts, underground chilled water piping system, and hydro test.
10. Attending weekly and monthly meetings held by the project manager and QC supervisor to talk about the project updates and completion.
11. Assisting the commission team during the testing, balancing, and adjusting phases of air and hydronic fitting.

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply