As a Quality Engineer, you will be responsible for ensuring the quality of our products and procedures in compliance with established standards, address quality issues, drive continuous improvement, and contribute to building high-quality products that exceed customer expectations.

Job Responsibilities

• Conduct assessment and review on supplier qualification, performance and process capability.
• Ensure supplier quality issues are dealt with, analyzed, improved and follow through.
• Interact with customer on product quality. Handle and follow-up to address customer feedback/complaints.
• Support internal, external and customer audits.
• Evaluation, verification and validation of new parts/samples.
• Establish and maintain inspection criteria for incoming, in-process and final products.
• Identify quality issues, NCR, CAPA handling and drive continuous improvement.
• Authorize the release of products (COC), COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control

Job requirements

• Bachelor's degree in relevant field with 3-5 years experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools
• Strong analytical and problem-solving capability

Responsibilities:

• Work closely with customer and internal team during new product introduction to deliver design project
• Coordinate with factory to ensure timely delivery of prototypes during sample builds
• Facilitate DFM activities during development to ensure product is manufacturable
• BOM creation and Maintenance in SAP system (Part addition, BOM Upload, BOM Change)
• Handover of project to factory for mass production

Requirements:

• At least 3 years of working experience in electronics manufacturing environment
• At least a Bachelor’s degree in Engineering
• Good understanding of electronics manufacturing process
• Experience in project / product management
• Fluent in verbal and written communication

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

Job Description

•

• Provide Level 1-2 support for IBM AIX operating systems and related technologies

• Troubleshoot and resolve complex hardware and software issues on IBM AIX systems.

• Perform system administration tasks such as installation, configuration, and maintenance of

AIX servers.

• Proficient in virtualization technologies such as SR-IOV,SEA, PowerVM Virtual I/O Server

(VIOS), HACMP,Spectrum Scale(GPFS)

• Monitor system performance and make necessary adjustments to optimize performance.

• To perform disaster recovery support and testing on IBM Aix sytems.

• Collaborate with other IT teams to integrate AIX systems into the overall IT infrastructure.

• Develop and maintain documentation related to AIX systems and configurations.

• Participate in on-call rotation and respond to critical incidents in a timely manner.

• Identify and implement security measures to protect AIX systems from potential threats.

• Stay up-to-date with the latest technologies and trends in AIX and related technologies.

• Experience in managing complex AIX environments.

• Ability to work independently and as part of a team.

• Relevant certifications, such as IBM Certified Specialist - Power Systems or IBM Certified

Advanced Technical Expert - Power Systems, are a plus

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Interested candidates are to submit a detailed resume to speed up the application process.

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Key Responsibilities

Job Description

•

• Provide Level 1-2 support for IBM AIX operating systems and related technologies

• Troubleshoot and resolve complex hardware and software issues on IBM AIX systems.

• Perform system administration tasks such as installation, configuration, and maintenance of

AIX servers.

• Proficient in virtualization technologies such as SR-IOV,SEA, PowerVM Virtual I/O Server

(VIOS), HACMP,Spectrum Scale(GPFS)

• Monitor system performance and make necessary adjustments to optimize performance.

• To perform disaster recovery support and testing on IBM Aix sytems.

• Collaborate with other IT teams to integrate AIX systems into the overall IT infrastructure.

• Develop and maintain documentation related to AIX systems and configurations.

• Participate in on-call rotation and respond to critical incidents in a timely manner.

• Identify and implement security measures to protect AIX systems from potential threats.

• Stay up-to-date with the latest technologies and trends in AIX and related technologies.

• Experience in managing complex AIX environments.

• Ability to work independently and as part of a team.

• Relevant certifications, such as IBM Certified Specialist - Power Systems or IBM Certified

Advanced Technical Expert - Power Systems, are a plus

Responsibilities:

• Review project specifications and technical clarifications
• Responsible for on-site technical & engineering matters and quality checks
• Perform site supervision and co-ordination of M&E works
• Review design M&E drawings and identify discrepancies between M&E, structural, architectural and client’s provision
• Ensure all materials used and performed are as per specifications
• Preparation of reports as required
• Liaise with clients, consultants, sub-contractors, suppliers and relevant authorities
• Any other duties as assigned

Requirements:

• Relevant Diploma, Degree in Electrical/ Mechanical Engineering or equivalent
• Minimum 2 years of relevant experience in the same position
• Able to use Microsoft Project, AutoCAD
• Experience in HDB BTO Project will be preferred

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

• Develop battery data analytics processes and visualizations for vehicle programs.
• Data management and retrieval using Spark, Hive, Hue, and Jupiter Notebooks.
• Data analysis using Python, MATLAB, and R.
• Data visualization with Power BI, Tableau, Matplotlib, and ggplot2.
• Collaborate with battery data analytics and engineering groups on algorithm design, results, modifications, production issues, data consumption methods, and lessons learned.
• Apply analytical methods to assemble insight from electric vehicle usage data. Use the appropriate statistical methods to make actionable inferences.
• Fit complex models to multi-factor datasets using Python, MATLAB, R.
• Model and project the long-term trends of key electric vehicle metrics. Validate results.
• Apply statistical and machine learning models to understand battery production quality metrics.
• Contribute to analytics forums and cross-functional groups by sharing learning within and beyond Global Battery Engineering and Automotive Engineering for PSV operation.

Job Requirement

• Any qualification in Automotive/Electrical/Mechanical Engineering, Computer Science, Applied Mathematics, Statistics, or Data Analytics.
• Minimum technical knowledge of data analysis methods and success in solving complex problems.
• Proficiency using relevant tools. (Python, Spark, Hive, MATLAB, Power BI, R)
• Real-world experience using Hive to query Hadoop data file structures.
• Practical knowledge of machine learning and predictive methods.
• Ability to lead multiple projects and assignments with high level of autonomy and accountability for results.
• Knowledge of high voltage batteries and electrification subsystems.
• Electrochemistry background.
• Willingness to learn and quickly adjust to new tools and systems.
• Capable of converting ambiguous problem statements into concrete project requirements.
• Proven proficiency in statistical analysis techniques.
• Practical knowledge of machine learning and predictive methods.

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Civil Engineer Job Description

We are looking for an experienced, driven civil engineer with a wealth of industry knowledge. To ensure success, the ideal candidate should be comfortable splitting their hours between the office, on-site visits, and attending council meetings.

The civil engineer should be a critical thinker and have sound subject knowledge of mathematics and physics to identify and solve engineering problems. You must also possess a certain level of creativity to present innovative solutions and improvements to technical processes. The successful candidate will be able to effectively communicate ideas, make recommendations, and negotiate project details with their team, subcontractors, and clients.

Civil Engineer Responsibilities:

• Developing detailed designs.
• Doing feasibility assessments and site inspections.
• Preparing and implementing project plans.
• Researching and providing estimates for projects.
• Reviewing government regulations and ordinances.
• Monitoring and optimizing safety procedures, production processes, and regulatory compliance.
• Making recommendations or presenting alternative solutions to problems.
• Confidently liaising with clients and other professional subcontractors.
• Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).

Civil Engineer Requirements:

• Bachelor’s degree in civil engineering or related field, accredited by the Institution of Civil Engineers.
• Registration/Licensure as a professional engineer may be required.
• A minimum of 5 years of industry knowledge may be strongly desired.
• Familiarity with design software, such as Autodesk, AutoCAD Civil 3D, and MicroStation.
• Knowledge of map creation software and photo imaging software.
• Strong analytical and critical thinking skills, with a high level of accuracy in calculations and design.
• Excellent time management skills to ensure project deadlines are met.
• Leadership skills to effectively manage a diverse group of professionals working on one project.
• Ability to coordinate more than one project at a time.

About The Employer

Employer is a leading global game introduction company, leveraging the extensive gaming expertise and well-established network of its parent group. Our core competency lies in identifying and sourcing top-tier games from Western Europe and Southeast Asia, regions renowned for their innovation and creative talent.

Through a meticulous selection process, they ensures the acquisition of high-potential titles that are primed for success. These games are then seamlessly integrated into the group’s robust global distribution system, enabling them to reach audiences worldwide. By staying ahead of industry trends and fostering strong relationships within the gaming ecosystem, OAKFUN continues to enhance its reputation as a trusted partner in delivering premium gaming experiences on an international scale.

Hiring Position

Platform Engineer (Gaming)

Roles & Responsibilities

• Responsible for business system requirement analysis, architecture design and development
• Mentor and manage engineers and ensure high technical quality and personal growth
• Be involve in entire life cycle of data projects right from the beginning of requirement gathering, design, development to deployment in production.
• Oversee project engineering plans, delivery and provide technical leadership for the engineering teams
• Oversee tools development with technical artists, artists and designers
• Ensure the best performance, quality, and responsiveness of applications and games
• Establish effective strategies and development pipeline
• Analyzing the threads and identifying the bottlenecks in mapping, increasing the buffer sizes of transformations according to the incoming data
• Lead UI/UX design discussions and provide expertise in best practices and patterns.
• Translate business/game requirements into technical specifications
• Design and implement game mechanics and UI according to design specifications
• Be involved in ad-hoc projects where required

Requirements

• Minimum Diploma in Information Technology, Computer Science or equivalent professional qualifications is required
• Technical track record working closely with engineering / technical teams
• Passion for working with the games industry to bring AAA titles to market
• Minimally 5 years of game development experience, including 2 years in a leading or senior level role
• Game development experience using Unreal Engine or other equivalent game engines preferred
• In-depth knowledge of full lifecycle game programming and related experience in rendering and 3Cs
• Highly proficient in programming languages, such as C++, C# and Java
• Fluency in English and Mandarin to communicate technical jargons with mandarin speaking vendors and stakeholders

The above details has been composed to provide an overview of the general requriements, nature and level of the work performed by this position. It is not intended to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

The Employer adhere with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of their age, race, religion, nationality, marital status, or family responsibilities. A more detailed discussion of the TGFEP is available on the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP) website at https://www.tal.sg/tafep.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/curriculrm vitae. Upon doing so, by submitting this or disclosing your personal information in connection with your job application, you are deemed to have read and agreed to the terms of our Privacy Policy, and consented to the collection, use and disclosure of your personal data by us, in accordance with our Privacy Policy. Please access our website for a copy of our Privacy Policy

We regret that only shortlisted candidate will be notified.

EA License No.: 21C0611

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Summary

Responsible for product line quality and efficiency so as to achieve production KPIs. Introduce productivity improvement through Lean processes, automation, preventive maintenance and better tools / jigs / fixtures design. Managing engineering projects such as Digitalization, Automation, Localization, Cost Saving and NPI. Support Industry 4.0 digitalization of the entire production lines in Singapore Site.

Key accountabilities

• Responsible for product line yield and quality
• Support/lead Continous Improvements and Lean initiatives
• Support ISO9001, ISO14001 and ISO45001 audits
• Conduct RMA/DOA evaluations
• Incorporate ECs in production and ensure its full implementation
• Create, update work instructions and train production technicians
• Support mass production of NPI
• Ensure complete, up-to-date, accurate and accessible engineering records as well as maintain accurate BOMs, routings, work instructions and ISO documents

Requirements

• Minimum Diploma in Engineering/Science disciplines
• At least 3 years of relevant experience in manufacturing / production engineering
• Experience in Industry 4.0, Lean and Six Sigma
• Knowledge in analytical instruments will be an advantage
• Knowledge in ISO 9001, ISO 14001and 45001
• Experience in developing Work Instructions, BOM structure and routing hour
• Good communication skills both verbal and written

Job Description

• - To train and lead a small group of Technician in trouble shooting, servicing and commissioning of Industries control system like Inverters, PLC, POD, Motors & DCS system
• - Understudy company's product and generate training procedure for both in-house Technician & customers
• - Assigning Technician's daily responsibilities and up keep of the workshop facilities and equipment
• - Assist customer service in any Technical related issue
• - Attending field related servicing or trouble shooting assignment

Requirement

• Only Singaporean need to apply
• - Diploma or Degree in Electrical or Electronic Engineering
• - Preferable with 1 - 2 years working experience in related industries with knowledge in PLC & Inverters trouble shooting skills
• - Possess good analytical & logical thinking skill
• - Good working attitude with Interpersonal Skill
• - Able to travel overseas with short notice and able to work under adverse situation or conditions.
• - Team Player & able to work with management in uniting the Engineering Team to fulfil company's objective

Job Description:

- Perform Preventive Maintenance and Calibration of Scientific Instrument

- Provide technical support and carry out trouble-shooting

- Carry out installation, commissioning, and training of Scientific Instrument on site

- Prepare service quotation and attending to service call promptly

- Built good rapport with customer

Requirement:

- Diploma in Electrical/Electronic/Mechanical Engineering or other relevant qualification

- At least 1-2 years of relevant experience in the servicing and maintenance of laboratory/scientific instrument

- Have basic knowledge on electrical/electronic schematic diagram

- A team player and also able to work independently

- Occasional travel to ASEAN region for job assignment and oversea product training

handle components in to chemical treatment.

handle work jobs in sand blasting.

able to access the timing for the machines running

handle machine maintanence

Job Description & Requirements

About Company:

At Botsync, we aim to build more accessible and simplified automation solution and to be the partner of choice for intralogistics automation. With our syncOS software integrator tool and MAG AMR platform, we provide an intelligent end-to-end integrated automation solution for factories and warehouses. Our solutions enable companies to implement automation solution that is fully transparent, more data driven and fundamentally flexible to alter and reconfigure.

Role Summary:

We are actively seeking a talented and proactive Controls Engineer with 2-4 years of hands-on experience in the relevant industries, specifically material handling automation. In this role, you will play a vital part in designing and implementing various integrated solution along with Autonomous Mobile Robots.

Responsibilities:

Liaise with different stakeholders to understand and conceptualize the integrated automation solution requirements.
Finalize and detail out the conceptualized solution requirement along with different internal teams and external vendors/partners. Ensure that the latest and optimised technology is used for the solution requirements.
Visit vendor sites to validate the proposed technology, arrange demo from vendor when required.
Prepare and release engineering BOM for overall solution as per requirements. For internal modules, design and develop the solution, release production documents as per internal process.
Perform module testing and complete integrated system testing internally as well as at customer sites when required.
Take ownership of implementing the solution on site and perform the necessary acceptance tests
Prepare and maintain the complete solution technical documents for products and projects as per internal documentation standards.
Constantly work on prototyping and evaluating new technologies and automation modules.
Be flexible to provide support and share knowledge with other cross functional teams as and when required.

Educational Requirements:

Diploma or Degree in Electrical/Electronic/Mechatronics or equivalent with atleast 2+ years experience in the field of industrial automation.

Key skills candidate(s) must possess:

Practical experience in designing & implementing integrated solutions using conveyors, cobots, mobile robots, etc.
Strong knowledge on component selection such as power converters, motors, drives, sensors, PLC, etc. based on technical requirements.
Knowledge on various interfacing protocols such as PROFINET, PROFIBUS, EtherCAT, Modbus, OPC server, etc.
Must have PLC programming experience with Siemens or Allen Bradley PLCs
Hands on experience on load calculation and wire/cable selections.
Must have practical experience in preparing electrical schematic diagrams using AutoCAD.
Prior experience working on mobile robot integrated solutions is an added advantage.

Benefits that Botsync provides:

Comprehensive benefits package encompasses Health Insurance coverage for employees
Opportunity to work with a diverse range of technologies and products.
Flexible work environment
Engaging and supportive team culture that fosters professional growth and development.
Work with global customers across Asia Pacific

Responsibilities

• Prepare, schedule, coordinate and monitor the assigned engineering projects
• Manage and supervise the administration works
• Office based for paper work and site visiting for site progression
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications
• Interact daily with the clients to interpret their needs and requirements and represent them in the field
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status
• Supervise ongoing site activities closely
• Liaise with Clients, Consultants and Authorities for management of project
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Review the relevant standards and test requirements before commencement of the jobs
• Organize and provide staffing, equipment and materials for testing
• Manage and minimize operations costs (e.g. manpower, maintenance of equipment, overtime, etc)
• Assign responsibilities and mentor project team
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support
• Review engineering deliverables and initiate appropriate corrective actions

Requirements and skills

• Proven working experience as a Civil Engineer
• Bachelor’s degree in civil engineering or related field, accredited by the Institution of Civil Engineers.
• Excellent knowledge of design and visualisations software such as AutoCAD
• Advanced MS Office skills
• A minimum of 5 years of industry knowledge may be strongly desired
• Familiarity with rules, regulations, best practices and performance standards
• Ability to work with multiple discipline projects
• Project management and supervision skills
• Decision making ability and leadership skills
• Time management and organization skills
• Class 3 Driving Licence

Job Descriptions:

• The candidate will be responsible to penetrate new market and expand market share; formulate sales plan and meet the annual budget set.
• He/She is also responsible to liaise with our customers on their solution needs and after sales need. This includes providing quotations to customers, sales report generation, project management and sales presentations.

Job Requirements:

• A degree or diploma holder preferably in Mechanical Engineering or equivalent.
• At least 3 years’ experience in selling Air/Gas transfer technology such as Compressor, Blower and/or Vacuum pumps, with some on site experience in commissioning and troubleshooting skills.
• Good Salesmanship and possesses good knowledge in Air Products.
• Knowledge of MS Office and ability to read P&ID is a must.
• Class 3 driving license with own vehicle.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628