Responsibilities

• Understand/develop technical design specification/requirements and associated document relevant to project.
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and system commissioning on site.
• Produce test document and training material.
• Conduct training to customer
• Provide technical support to sales and maintenance team

Requirement

• Possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Ideally with 2 or more years of DCS/PLC/SCADA/Harmonas programming experience
• Ability to read electrical/P&ID schematics
• Able to work in a collaborative team environment
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our manufacturing company designs and manufactures metal precision components, molds, and precision-pressed materials.

Of course, people with Process experience are of the utmost importance but they have to be able to speak English and be able-bodied for the job posted.

Malaysian PRs welcome to apply.

Job Description & Requirements

1) Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.

2) Confer with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.

3) Responsible of setting the machine to meet the First Article base on the customer print, tolerance, and dimensions.

4) Responsible of assisting the Machine operator to meet their goals.

5) Responsible to edit program to suit different machines will be preferred

6) Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications.

7) Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.

8) Oversee installation, operation, maintenance, and repair to ensure that machines and equipment are installed and functioning according to specifications.

9) Conduct research that tests and analyzes the feasibility, design, operation and performance of equipment, components and systems.

10) Develop, coordinate, and monitor all aspects of production, including selection of manufacturing methods, fabrication, and operation of products.

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

• 5 Days work week
• 9am to 6pm
• Walking Distance from MRT

Responsibilities:

• Oversee drawing management and control of technical documentation
• Assist project manager in planning and execution of project plans at site
• To understand and design electrical drawing and single line drawings
• Carrying out tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementing preventative maintenance procedures
• Preparing service & Site Progress Reports

Requirements:

• Diploma in Engineering or equivalent
• Min 2 years of working experience in construction industry
• Knowledge in PLC and WSH

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Overseeing projects at one or multiple stipulated sites.

• Assist project manager is the execution of the projects.

• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.

• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.

• Monitor and ensure progress of works are carried out according to project specification.

• Assist drafting team for design schematic drawing, layout drawing, P&ID drawing.

• Review and check drawing before submit to main contractor.

• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.

• Support project manager in the administration of contract, claim, variation and any dispute arise.

• Raise MR and order material & arrange manpower for necessary works.

• Advise site team for work schedule and technical issues.

• Make sure project is carried out according to schedule.

• Responsible for site supervision and implementation.

• Responsible for ensuring implementing safety measures.

Requirements:

- Minimum diploma

- 3 years or above experiences in ACMV, especially in air-conditioning industry

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Participate in new product development from concept to launch.
• Manage and co-ordinate with various departments, to develop product fulfilling to product design specification, keeping schedule, cost and quality.
• Identify and resolve all issues effectively to achieve all objectives.
• Acquire product design specification approval from stakeholders before product development.
• Translating customer’s needs and pain points into product design specifications.
• Establish and carry out test procedures for products to meet to product design specification.
• Establish assembly drawing to the manufacturing team for production purposes.
• Ensure proper documentation (including manuals) of all required information for product.
• Support product installations and any necessary diagnoses, troubleshooting, service, and repair.
• Provide product training and support internally.

Requirements:

• 2-3 years working experience in relevant fields.
• Min. education qualification: Bachelor Degree in Robotics System, Computer Engineering, Electrical Engineering
• Strong foundation in Electrical, Mechanical and Software System
• Demonstrate deep interest & understanding in robotics field
• Experience in developing on actual physical robot is a plus
• Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus

Yee Jie Ling Jaslin | EA Reg. no.: R1440114

RS Recruitment Agency LLP | EA Licence no.: 17C8809

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Prepares and reviews key project documentation in executing the complete Subsea/Riser interface engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares and reviews project requirement specification, layout and interface drawings, design studies and other engineering deliverables using engineering common network, software and tools
• Coordinates with other engineering team members (i.e. Yard engineering, basic design and etc.), Equipment designers and Client’s SURF contractors on technical issues and design solutions in meeting project deliverables
• Participates in project meeting, attends to basic technical queries and issues related to subsea/riser interfaces, reviews and be responsible for Riser interface equipment designer deliverables
• Liaises with owners, Equipment designers, SURF contractors, , statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates and reviews the reports on work progress for submission to owners, statutory and classification authorities for approval and maintains project database for future references
• Preparation of technical specification (TS) for complex riser related packages.
• Technical bid evaluation (TBE) of vendor proposals to aid selection of most suitable proposal for the project.
• Reviews Vendor deliverables
• Manages & Liaises with the selected vendor to deliver the package meeting all the project requirements in a safe and cost-effective manner meeting the schedule.
• Provides engineering inputs to commercial, production and project team members on all aspects to procurement, fabrication, installation, testing and commissioning activities

Requirements

• Bachelor's Degree in Mechanical/ Offshore and Marine Engineering or equivalent
• 5 years of experience in Procurement, Planning, Designing, Integration of Subsea/Riser interface design in the oil & gas industry
• Experienced in engineering pre-commissioning and commissioning activities in package
• Possesses good interpersonal skills
• Good problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

• Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

• Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

• Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

• Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

• Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

• Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices and standards.

• Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

• Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

• Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

• Job Benefits

• · Positive and closely knitted working environment

• · Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• · Annual leaves starting with 14 days and up to 21 days

Working Location:

15 Kwong Min Road S(628718)