Job Description

1. Help implement "Green" initiatives to align with Company's sustainability and eco-friendly strategies.
2. Ensure compliance with mandatoy regulations regarding water polution, recycling and waste disposal.
3. Collect and analyse environmental data.
4. Be familiar with business requirements that requires, compliance with Enviromental Product Declaration,
ISO 14025 and Environmental, Social and Governance factors.
5. Help determine ways to prevent, control and correct environmental health hazards.
6. Maintain records and help manage Company's consumption of electrical and water resources.
7. Familiarity with company's effort in keeping pace in complying with Façade productss specifications
concerning Design for disassembly, use of recycled materials, circular economy, materials with low carbon
emission with sustainable characteristics.
8. Create reports about company's environmental impact.

Position Requirements

Bachelors Degree In Environmental Engineering

Tasks

Designing systems and processes to minimize pollution and waste

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Descriptions:

• Collaborates with the commercial/business development team to develop innovative and competitive technical solutions for bidding projects.
• Prepares detailed technical method statements, drawings, and integrated service and equipment solutions to meet project requirements.
• Reviews and understands bidding employer’s requirement documents, project specifications, and process data.
• Translates employer requirements into effective contractor solutions that align with project goals.
• Monitors market trends to ensure tender documents remain competitive and relevant, making necessary adjustments.
• Implements improvements in the tender process to enhance the company’s market position and competitiveness.
• Works closely with various department stakeholders to gather necessary information for bidding proposals.
• Consolidates and integrates collected information into comprehensive bid proposals.
• Conducts internal reporting of tender solutions to secure management approval for bid submissions.
• Provides timely and accurate updates on bid progress to the tender manager.
• Supports the tender manager in developing commercial bid solutions and engaging with the market as required.
• Support engineering budget (estimation) and cost control.
• Participates in market visits to assess and incorporate subcontractor solutions into the company’s proposals.
• Evaluates subcontractor technical solutions to ensure alignment with project requirements and company standards.
• Integrates subcontractor solutions into the company’s bid proposals effectively.

Requirements:

• Minimum Diploma or Bachelor’s degree in engineering, or a related field.
• Prior experience and knowledge in offshore wind projects is highly desirable and will be given preference.
• Proven experience in technical solution development, preferably within a commercial/business development context.
• Strong understanding of bidding processes, tender documentation, and market trends.
• Excellent analytical skills and attention to detail.
• Effective communication and collaboration skills to work with cross-functional teams.
• Ability to manage multiple projects and meet tight deadlines

Job Description

• Monitor, track, and provide timely project progress reports to the management
• Report to Project Manager / Site Manager for the arrangement of work
• Prepare the specification and data sheet as per codes / standards, project, and client’s requirement,
• Responsible of the submission and approval of materials in compliance to the specification;
• Responsible monitoring of work progress on site
• Co-ordinate the inspection work on site and installation works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors

Requirements

• Degree or Diploma in Mechanical Engineering / Building / Project Management or equivalent.
• Min. 2 years relevant working experience in the construction industry (building facade).
• Strong leadership, organizational, planning, and interpersonal skills.
• Good working attitude with a high level of professionalism, integrity, initiative, and being a team player.
• Knowledge and/or experience in contractual management is an added advantage.

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Description

· Responsible for ensuring that assigned projects meet customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practiced and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 2 years of working experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function / Primary Goals / Objectives:

• Lead site wide implementation of Food Safety initiatives. Consulting with Division Food Safety SME where necessary.
• Drive and implement continuous improvements to enhance quality and food safety in our products in a cost effective manner.
• Develop training materials and conduct training as part of roll out of Food Safety initiatives.
• Monitor and report project milestones. Ensures timely and successful execution of changes.
• Improve Food Safety culture and raise awareness of Food Safety through various initiatives.
• Improve site Hazard Analysis Critical Control Point (HACCP) system.

Major Responsibilities:

• Establish project milestones and ensures tracking for timely completion.
• Training of cross functional team on the new Food Safety initiatives.
• Implement Change Management Tools (example, CLRS) to ensure successful roll out of Food Safety initiatives.
• Drive continuous improvement projects to drive efficiency and cost for the plant.
• Establish Standard Operating Procedures for new Food Safety initiatives.
• Implement improvements to site HACCP and risk assessment.
• Any other duties as assigned by Supervisor.

Requirements:

• Bachelors’ Degree in engineering (chemical / biomedical), manufacturing, industrial management, or a related field.
• Min 3 years of experience in quality project management, preferably in food/pharmaceutical manufacturing industry.
• Good practical knowledge of GMP in food / pharmaceutical manufacturing.
• Good leadership and problem-solving skill.
• Good communication and report writing skill.
• Good project management skill.
• Team player with initiative, drive, good communication skills and a strong command of written English.
• Knowledge in HACCP and risk assessment.
• Knowledge in food engineering and experience in a dairy / nutritional industry would be advantageous.
• Knowledge and experience in driving cultural changes in organization is preferred.

*Kindly note this position is based in Tuas and it is a 12-month contract opportunity.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Education Requirements:

• Bachelor's degree or above in Automation, Control Engineering, Internet of Things (IoT), or related fields.
• Experience in the steel structure industry or similar manufacturing sectors is preferred.

Job Description:

• Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.
• Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.
• Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.
• Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.
• Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

• Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.
• Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).
• Familiar with C# programming.
• Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.
• Understanding of industrial automation technologies, including PLC programming, servo control, and industrial robotics.
• Understanding of smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

Your duties shall cover but not restricted to the following:

• Provide technical expertise to support end-to-end project management, from tender estimation, project scoping, sub-contractor selection, drawing submissions, on-site project execution, to testing & commissioning and project handover
• Coordinate the procurement and delivery of materials and subcontractor services as per project plan
• Supervise and ensure ongoing works on-site are on track according to project schedule
• Prepare M&E Combined Service Drawings (CSD) to facilitate effective site coordination with all project stakeholders
• Prepare Power Interruption Plan (PIP) or ACMV system migration plans for project involving live systems, including effective communication of work procedure to all project stakeholders
• Preparing project progress reports for director, consultants and clients
• Attend site surveys, coordination meetings with consultants, sub-contractors and any relevant authorities
• Prepare payment claims and variation orders for project contracts
• Provide emergency response for fault tracing and troubleshooting as and when required at client sites
• Ensure adherence to and enforce Bizsafe work safety methods, RA, MOS, procedures and policies regarding all site activities

Requirements

• Hardworking and positive attitude, strong sense of responsibility, willingness to learn
• Degree in Mechanical Engineering or Diploma with work experience
• Good written and spoken English
• Candidates with prior working experience in the construction industry will have a strong advantage
• Ability to multitask is important, as engineer will be expected to handle multiple projects simultaneously
• Proficient in Microsoft Office, Basic knowledge in Microsoft Project and CAD will be useful
• Strong knowledge in ACMV system design and installation including key equipment such as chillers, CWP, CHWP, CT, valves, AHU, in-row cooling units
• Basic understanding of Electrical, BMS and Fire Protection services
• Good knowledge of relevant industry codes of practice and standards and site installation procedures, with familiarity in M&E work methods and sequence

Interested candidates should send an email to [email protected] with full resume, contact details, last drawn & expected salary. Only shortlisted candidates will be contacted.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

PRIMARY FUNCTION:

• Supervise and inspect the installation, modification, testing and operation of instrumentation, controls, components, and systems.
• Function as project development member to install or upgrade equipment. Schedule and obtain project material and manpower.
• Organize/coordinate site calibration program in accordance with policies and procedures.
• Oversee the use and maintenance of measuring instruments.
• Support in the planning of routine maintenance of production equipment.
• Strategize on maintenance, work instruction and methods to create effective preventive maintenance procedures.
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability.
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle.
• Oversee and control maintenance costs.
• Train and mentor technicians in equipment operating concepts and maintenance techniques.
• Support plant EHS and Quality initiatives and targets.
• Support automation activities including line sustaining operations and troubleshooting.

MAJOR RESPONSIBILITIES:

• Review/approve calibration specifications against product/ process specifications.
• Ensure timely completion of calibration related investigations and develop effective corrective/preventive actions.
• Develop standard operating procedures for instrument calibration and implementing of maintenance programs for operational efficiencies and minimize cost.
• Evaluate root case analysis reports of major equipment and system failure and develop potential solutions.
• Review installations and assembly documentations periodically to ensure compliance with organizational procedures.
• Approve recommended repair works for major equipment and system failures.
• Establish technical guidelines for the calibrations and alignment of robot motors, sensors and encoders.
• Optimize the motion, functions and routes of robots and other equipment and system components.
• Manage vendor service contracts.
• Preparing operation and maintenance budget.
• Any other duties as assigned by supervisor.

REQUIREMENTS:

• Bachelor of Science in Control & Instrumentation/ Electrical/ Chemical/ IT Engineering or related discipline.
• Diploma with at least 5 years of experience are also welcomed.
• 5 years of relevant experience in a pharmaceutical or nutritional manufacturing facility will be highly advantageous.
• Good planning and supervisory skills.
• Strong interpersonal and communication skills.
• Programmable logic controllers (PLC) will be advantageous.
• High in computer literacy.
• Proficiency in trouble shooting and problem solving.
• Ability to lead, motivate and foster professional development within a team.

*Kindly note this position is based in Tuas.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Descritption:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion.
• Patrol / Check machine condition / Report / Service proposal w quotation & manage prospectives / secure order / execute maitenance job by team
• Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis

Job Requirement

• Minimum 3 year experience in aftersales service
• Experience in handling compressor/Valve/Pump
• Minimum diploma in Mechanical engineering

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Assist the Business Development Manager and/or Management to support business unit growth and profit objectives, driving demand for select area of business
• Ensure to meet business unit objectives, sales goals and client retention goals; increase brand recognition; and enhances market position
• Manage PSC marketing efforts including marketing materials, website, social media, tradeshows and events
• Develop a thorough knowledge of products and services, business models, operations, competition, and the industry
• Develop and maintain technical sales expertise, stay updated on all trend and development related to product portfolio
• Track sales progress and support forecast efforts
• Identify business opportunities by identifying prospects and evaluating their position in the industry; researching and analysing sales options
• Support Sales staff in key account management through sales cycle in the preparation of quotations, proposals, service contracts, purchase orders, deliveries and manage customer payments
• Establish pricing strategy to improve on product sales and for new business opportunities
• Support local sales process in tender specification, configuration, product presentation and demonstration, trial, user training and support for onsite service coordination
• Manage customer satisfaction
• Follow up on submitted information by telephone or email
• Be committed to independence, neutrality and impartiality in dealing with colleagues, customers and supplier; safeguarding the confidentiality of customers and suppliers, will not disclose confidential information to third parties unless prior agreement has been provided

Requirements:

• Diploma or Degree in Chemical Engineering, Chemistry, Business Management or Marketing or equivalent. Preferably with experience in Services / Product Marketing
• Excellent Microsoft Office skills specifically Word and Excel
• Excellent administration skills
• Business-to-business marketing experience
• Excellent written and spoken English communication skills
• Good eye for detail
• Team player

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

Responsibilities:

• Attends / conducts daily tool box briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Oversees day-to-day project supervision for new construction platform
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirements
• Monitors on structure work progress activities.
• Reports on the structure project progressEnsures sub-contractors carry out the work as planned
• Evaluates project to identify issues and opportunities to improve performance
• Identifies and resolve structure interference and propose modification onsite if necessary.
• Monitors drawing and technical information
• Conducts Risk Analysis assessment

Requirements:

• Bachelor's degree, Diploma in Engineering
• 3 – 5 years of relevant working experience in construction of oil & gas offshore platform project
• A team player & be able to work closely with other discipline supervisors.
• Willing to work late hours

Our Address and Working Hours:

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

1) Responsible for proper take -over of confirmed projects from sales department.

2) preparing project schedules , manpower allocation plans and bill of quantity based on project

requirements and cost estimates.

3) Ensuring project drawings/documents are subject to proper internal and external design review

and vertification.

4) Ensuring all project documents are timely updated and subjected to proper project document control.

5)

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Job description

• Support agency in new cloud related projects implementation.

• Assist agency in reviewing access rights, and accounts control in cloud.

• Review and resolve the vulnerabilities reported from scan and/or alerts.

• Provide consultancy to new projects to onboard AWS cloud services.

• Strengthen the security posture of existing cloud infrastructure and propose enhancement.

• Raise service request to BAU Operations Team for in-scope cloud related tasks.

• To support and maintain AWS S3 Buckets and other AWS Storage services such as FSX.

• To support Trend Micro Cloud One Workload and Endpoint Security / AMHIPS as part of Agency Anti-Virus/ Anti-Malware system.

• To support and maintain ABLR Heavy Forwarder as part of Agency Audit Logging requirement.

• To support Agency Infrastructure using DevOps process or tools such as Terraform or AWS CloudFormation.

• To support Audit and security compliance activities.

• Work with BAU team, System Engineers, Cloud Engineers, and DBA to support and maintain agency environment.

• To support and maintain Central Account Management (CAM) servers as part of Agency Audit requirement.

• To support Disaster Recovery exercises.

• Possessing Cloud certifications is preferred.

If no relevant certification, a minimum of 4 years working experience in the IT field and at least 2 years working experience in a cloud environment will be required.