• Installation and maintenance of semiconductor equipment.
• Record engineering enhancements for future documentation.
• Develop procedures for the assembly, inspection, and testing of equipment.

Requirements:

• Diploma in Mechanical/Mechatronics Engineering or equivalent.
• At least 2 years of experience in setting up automation equipment.
• Knowledge of Electro Mechatronic System
• Willing to travel internationally for field support as needed.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Job Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting Experience in product/project, manufacturing and testing
• Able to liaise with customers on technical matters
• Experience in manufacturing environment with ISO13485 & FDA will be advantageous
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure preferred

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Job Description:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)

Job Requirements:

• Minimum Diploma in Electrical / Mechanical / Mechatronics Engineering
• Minimum 2 years experience in servicing CNC Turning or/and Milling Machines

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us:

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Global E-Commerce is a content e-commerce business with international short video product as the carrier. It is committed to becoming the first choice for users to discover and purchase good products with affordable prices. Global E-Commerce business team hopes to provide users with more tailored, active and efficient consumption experience, enabling merchants to receive stable and reliable platform services in different scenarios such as live e-commerce, short video content e-commerce, so as to make more affordable and high-quality products sell easily and a better life within reach.

The global supply chain and logistics team is at the forefront of revolutionizing e-commerce, powering the entire lifecycle of goods on our dynamic platform. From sourcing top-quality sellers and products to sparking interest sales and ensuring seamless fulfillment and delivery, we are crafting a cutting-edge digital supply chain solution that delivers unparalleled efficiency, collaboration, and management across multiple industries and roles.

Our vision extends beyond the digital realm, as we build and optimize offline logistics capabilities, including state-of-the-art warehouses, streamlined customs processes, robust transportation networks, and efficient distribution systems. By integrating advanced data intelligence, smart equipment, and innovative operational strategies, we empower merchants with enhanced logistics capabilities, guaranteeing reliable fulfilment and elevating the consumer experience on our platform. Our technology also helps our third-party logistics partners improve their operations, ensuring orders reach our customers faster and cheaper, and reducing fault tolerance throughout an order's journey from seller to buyer.

Responsibilities:

- Develop efficient, highly scalable and secured services to build/integrate logistics system for domestic and global TikTok Shop E-commerce.

- Optimize backend systems and services for data security, modularity, computational efficiency and scalability.

- Deliver best-in-class engineering excellence practices across all product engineering disciplines.

- Research, design, and develop computer and network software or specialised utility programs.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

Qualifications

Minimum Qualifications:

- Bachelor's or higher degree in Computer Science, Information Technology, Programming & System Analysis, Science (Computer Studies) or related discipline.

- Experience developing highly scalable backend services and systems using at least one of Java/Golang/Python/C++.

- Strong software programming capabilities, exhibits good code design and coding style.

- Deep understanding of data structure, algorithm design and analysis, networking, data security and highly scalable systems design.

- In depth knowledge of common databases and messaging frameworks like MySQL/Redis/Kafka etc.

Preferred Qualifications:

- Experience of logistics/transportation/delivery technology is a big plus.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us:

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Global E-Commerce is a content e-commerce business with international short video product as the carrier. It is committed to becoming the first choice for users to discover and purchase good products with affordable prices. Global E-Commerce business team hopes to provide users with more tailored and efficient consumption experience, enabling merchants to receive reliable platform services in different scenarios such as live e-commerce, short video content e-commerce, so as to make more affordable and high-quality products sell easily and a better life within reach.

The global supply chain and logistics team is at the forefront of revolutionizing e-commerce, powering the entire lifecycle of goods on our platform. From sourcing top-quality sellers and products to sparking interest sales and ensuring seamless fulfillment and delivery, we are crafting a cutting-edge digital supply chain solution that delivers unparalleled efficiency, collaboration, and management across multiple industries and roles.

Our vision extends beyond the digital realm, as we build and optimize offline logistics capabilities, including state-of-the-art warehouses, streamlined customs processes, robust transportation networks, and efficient distribution systems. By integrating advanced data intelligence, smart equipment, and innovative operational strategies, we empower merchants with enhanced logistics capabilities, guaranteeing reliable fulfilment and elevating the consumer experience on our platform. Our technology also helps our third-party logistics partners improve their operations, ensuring orders reach our customers faster and cheaper, and reducing fault tolerance throughout an order's journey from seller to buyer.

Responsibilities:

- Responsible for the research and development & architecture of the international e-commerce logistics system, to provide efficient and intelligent solutions for international e-commerce.

- Design a system model and business architecture that meets international business needs and has scalability based on business characteristics and industry best practices.

- Provide effective solutions for technical problems such as high concurrency and performance bottlenecks in the business process.

- Maintain the quality and stability of the system, and guide engineers at all levels to continuously optimize various technical indicators of the system.

- Research, design, and develop computer and network software or specialised utility programs.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

Qualifications

Minimum Qualifications:

- Bachelor's or higher degree in Computer Science, Information Technology, Programming & System Analysis, Science (Computer Studies) or related discipline.

- Candidate should have at least 5 years of experience in at least one mainstream programming language such as Java/Golang/C++, and related technology stacks.

- Familiar with commonly used middleware, such as message queues, caches, scheduled tasks, etc., and understand the principles of middleware.

- Possess certain experience in architecture design and implementation, and have a good accumulation in high-availability, high-performance, and high-scalability architectures.

- Deeply understand the related theories of distributed systems, such as load balancing, distributed transactions, CAP/BASE, etc.

Preferred Qualifications:

- Have led the design or reconstruction of medium and large complex systems, experience in e-commerce and retail related fields is preferred.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Position: Mechanical Engineer
• Industry: Chemical Plant at Jurong Island
• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• At Jurong Island (Company Transport Near Jurong East MRT)
• Salary Range: $4,500 - $5,500 + Bonus

Maintenance Engineer (Mechanical) reports to the Senior Technical Lead.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Manager and whose responsibilities include:

1. Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:

(a) daily maintenance [ preventive, corrective, & breakdown maintenance ]

(b) transition maintenance,

(c) turnaround maintenance and

(d) upgrading and improvement related to maintenance

2. Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.

3. Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.

4. Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.

5. Conduct root cause analysis to eliminate equipment / system defect and take appropriate preventive / corrective measures.

6. Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

• Well established Company
• Basic $3500 - $ 5000 + AWS + Variable Bonus
• Working location: Northeast
• Working hours: 8:30am – 5:30pm (Mon to Fri)
• Electrical & Electronics (E&E) |CCTV | ELV
• Training Provided

Job Responsibilities:

• Lead and manage facilities, security projects and maintenance from concept till complete
• Collaborate with cross-functional teams to gather requirements and design custom solutions
• Implement and optimize surveillance techniques
• Implement maintenance regime on facilities ensuring low downtime
• Ensure projects are completed on time, within budget and meet the highest quality standards

Requirements:

• Diploma and/or Degree in Electrical and Electronics Engineering or Instrumentation Control or equivalent
• Experience in CCTV / Project Execution
• Training Provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Position title: Sales Engineer
Location: Pasir Ris
Working Days: Mon - Fri
Working hours: 830 a.m. to 530p.m.
Salary: $3,000 - $4,500 (depends on experience)

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

Summary:

• Salary up to $6000
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

• Develop and implement software for automated equipment operating at high speeds.
• Carry out software design, coding, testing, debugging, and validation.
• Assess and define system performance and specifications.
• Perform software maintenance on existing equipment.

Requirements:

• Degree in Engineering or equivalent.
• At least 3 years of software development experience in the automation/semiconductor industry.
• Hands-on experience in programming multi-threaded windows application using Visual C++.
• Good understanding of electronic components, motion control and interfacing with inspection systems.
• Willing to travel overseas for field support when required.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website atwww.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

• Ensure chiller systems operate at optimal performance and efficiency.
• Provide exceptional service by addressing client inquiries and concerns about chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues, implementing effective solutions.
• Educate clients on proper operation and maintenance practices to enhance the lifespan of their chiller systems.
• Prepare detailed reports outlining service activities, findings, and recommendations for improvements.
• Execute commissioning processes for new chiller installations, ensuring proper setup and functionality.
• Work with agents, customers, and contractors to verify system performance and compliance with specifications.
• Foster collaborative relationships with contractors to encourage teamwork and shared problem-solving.
• Adhere to safety protocols and regulations, conducting safety briefings to ensure understanding of responsibilities.
• Perform field-based tasks in various environmental conditions, including outdoor settings.
• Be available for chiller breakdown calls during assigned standby shifts.

Job Requirement:

• Diploma and Degree
• 3-5 years of proven experience in chiller maintenance, commissioning, or related HVAC roles.
• Strong technical knowledge of chiller systems, HVAC principles, and electrical controls.
• Excellent problem-solving skills with a keen attention to detail.
• Strong communication and interpersonal skills for effective interaction with clients and team members.
  Ability to work independently and manage time efficiently.
• Completion of Building Construction Supervisors Safety Courses or equivalent certifications.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Vivian Chung Fhui Tiin
EA Personnel Reg No: R22106436

Responsibilities:

• Provide support for customer applications (on-premises and Cloud / SaaS based) directly and via triage to 3rd party support vendors where appropriate.
• Provide support for customer reporting solutions created using SQL, Crystal Reports, Excel and Power BI
• Write functional and technical documentation for applications and reporting solutions.
• Engage in Database Administration/Maintenance tasks on SQL Server and Azure SQL
• Respond to business user requests for change in application functional capabilities and engage with technical leadership on business demand for feature development.
• Participate in Projects involving application or data components as a SME.
• Provide high-quality support for the business-critical application(s) or data system.
• Develop and maintain an in-depth detailed knowledge of the applications you manage, including data structures, scheduled jobs, reports, and interfaces to other applications.
• Maintain know-how documentation of all the support tasks with resolution.
• Develop programmes and processes for internally developed IT systems to deliver efficient business processes.

Requirements:

• Experience in supporting and developing solutions for the Office 365 Platform including SharePoint Online, Power Automate (Flow), Power Apps, Forms Bookings etc. Operational support experience of SQL servers and knowledge of SQL Query.
• Experience supporting SaaS applications and web-based services. (websites, web applications)
• Demonstrate a good understanding of data / information architecture, Microsoft data lake, data pipelines and API integration.
• Application Knowledge of the following systems would be beneficial (Zendesk, Freshworks products (Freshdesk, Freshchat, Freshmarketer), Momentus EBMS Event Booking Management System, Online Bookings System, POS - TigerNix)
• Experience with PowerShell or other scripting code proficiency( vbscript / python)

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Software Engineer (Front End)

About the Job:

We are seeking a passionate and innovative software engineer to join our team in Electrical & Industrial Solutions Group Center of Excellence (EISG COE) to launch the next generation software solution for future enterprise engagements. As a software expert engineer, you will be the critical contributor of solution framework knowledge in developing and integrating multiple software products to create solutions. You must be a proven expert with experience designing, implementing, and deploying end-to-end solutions.

About the Team:

You will work closely with strategic planners, product management, and customers to understand key challenges and create solutions that advance this position as a market leader in measurement test.

Responsibilities:

· Lead architectural design and system level integration, interfaces, and test requirements for our client’s board test and measurement software.

· Work to outline end-solution and develop work breakdowns by shippable epics, milestones and ultimately work with leads on sprint deliverables.

· Set the technology direction for major components and services; work hands-on to integrate them into our measurement test software.

· Partner with internal and external stakeholders to understand requirements and translate them for the development teams.

· Work closely with various software teams in the development of the common building blocks

· Effectively communicate and interact up and down across the cross-functional teams and organizations.

Basic Qualifications:

· Bachelor/Master Computer Science/Electrical/Electronic Engineering or a software related discipline, from an accredited college or university

· Minimum 4+ years’ experience working with product design/development/engineering and product management.

· Proven track record to do what it takes to deliver our products to customers on schedule.

· Excellent written and verbal communication skills are a must.

· Knowledge with basic electronics principles, board testing technology, IEEE boundary scan standards and programming algorithms is an added plus.

· Experience in design, implementation and deployment of software that support multiple platforms (Windows, Linux and MacOS)

· Well-versed in modern techniques in object-oriented design, MVVM architectural pattern, design patterns and measurement libraries

· Expert working knowledge of application development using C#, WPF, .NET or Java GUI

· Familiar with front-end usability and user experience applications development

· Knowledge in RestAPI, gRPC, microservice technology and containerization

· Solid understanding of Jenkins CI/CD development flows and tools such as Microsoft Visual Studio, TFS, SharePoint, Git, Bitbucket, JIRA, Confluence or equivalent for cross platforms

· Experience in reengineering and migrating legacy software solutions to modern technology platform is an added plus.

When you’re part of the team at Thermo Fisher Scientific, you’ll do important work. And you’ll have the opportunity for continual growth and learning in a culture that empowers your development. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give our people the resources and opportunities to make significant contributions to the world.

Job Descriptions

• Assist Mass Spectrometry manufacturing by resolving technical issues.
• Mechanical, precision, or manufacturing engineering competence.
• Design tools and fixtures for process improvement.
• Maintain engineering support for Mass Spectrometry production.
• Assist the production and quality teams to improve First-Pass yield.
• Assist with engineering evaluation for component EOL and part change.
  Assistance with NPI manufacturing setup and product transfer initiatives
• Assist the quality team with field return instrument failure analysis.

Requirements

• Bachelor's Degree in Mechanical Engineering with minimum 5 years working experience, preferably in life science or biotech manufacturing environment.
• Work well within a team environment.
• Able to communicate with all levels, across functions and cross cultural.
• Strong analytical and leadership skill.

Benefits

We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation!

Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.

Benefits
We offer competitive remuneration, annual incentive plan bonuses, healthcare, and a range of employee benefits. Thermo Fisher Scientific
offers employment with an innovative, forward-thinking organization and outstanding career and development prospects. We offer an exciting
company culture that stands for integrity, intensity, involvement, and innovation!
Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us.

As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working
together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need.
#StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.
Apply today! http://jobs.thermofisher.com

A Snapshot of Your Day

The Field Service Engineer reports directly to the Head of Operations, working closely with the Local, Regional & Global teams.

How You’ll Make an Impact

• Provide Technical Field Advice, Supervision and perform installation, commissioning, maintenance, upgrades, refurbishment, and repair of high voltage transmission equipment and systems in the field.
• Conduct troubleshooting and diagnostics of high voltage transmission equipment to identify and resolve technical issues.
• Provide technical support and expertise to customers, field service engineers, and other internal stakeholders (including offer and project management teams).
• Collaborate with engineering and Sales & PM teams to provide feedback and recommendations for product improvements and modifications.
• Develop and maintain comprehensive documentation related to field service activities, including service reports, time sheets, maintenance logs, method statements, HSE reports, and equipment records.
• Acts as the Siemens Energy representative on site, coordinating responsible job scope and giving final approval and sign-off for works completed at site
• Train and mentor junior field service engineers
• Provide training to customers on routine maintenance tasks
• Contributes to internal and external customer satisfaction by executing Service work according to customer order and expectations
• Applies and adheres to Quality and HSE (Health, Safety, and Environment) protocols and regulations while working on high voltage transmission systems and equipment.

What You Bring

• Electrical Degree with more than 4 years’ working experience in field service engineering within the high voltage transmission industry (including ‘hands-on’ experience with new installations and service)
• In-depth knowledge of high voltage transmission equipment, such as transformers, AIS & GIS switchgear, circuit breakers, and related control systems.
• Proficiency in diagnostic tools, testing equipment, and software (including remote headset technology) used in the high voltage transmission industry.
• Strong problem-solving and troubleshooting skills, with the ability to work independently in demanding field environments.
• Excellent communication and interpersonal skills, with the ability to interact effectively with various organizational levels in customer’s and internal teams.
• Ability to improvise and willingness to experience unpredictable situations
• Positive attitude to work in challenging environment and in embracing a diverse and high performance culture
• Professional English and Mandarin required, where additional Asian languages will be a benefit.
• Willingness to travel locally and regionally to various field locations and work flexible hours as needed

We are looking for a skilled IT Security Engineer to join our client for a 1-year direct contract. The successful candidate will bring strong expertise in information security and hands-on experience managing security projects from start to finish.

Responsibilities:

• Lead and execute security projects across various domains, including endpoint, network, and application security.
• Implement and manage security tools, such as Web Proxy, Endpoint Protection, Email Security, and Vulnerability Scanners.
• Assess system security through threat modeling and propose effective solutions.
• Explore and integrate emerging security technologies to strengthen the organization’s security posture.
• Collaborate with teams to ensure secure deployment and operation of cloud environments.

Requirements:

• Bachelor’s degree in Computer Science, Computer Engineering, Information Security, or a related field.
• 5 years experience in IT Security, with deep expertise in one or more security domains.
• 3 years hands-on experience in end-to-end IT security projects or project delivery.
• Familiarity with security tools and frameworks.
• Security certifications (CISSP, CISM, AWS Certified Security, etc.) are highly desirable.
• Experience with cloud security is an added advantage.
• Thrives in fast-paced and demanding environments.

This role is a great opportunity to work on impactful security projects in a dynamic environment.

Responsibilities:

• Oversee distribution management for direct users and distributors.
• Drive revenue growth in the assigned territories.
• Achieve sales targets and develop plans to implement strategic business objectives aligned with the group's vision and mission.
• Proactively create new applications and communicate them to distributors.
• Collaborate with the Regional Team to provide monthly and quarterly updates on sales forecasts, budgets, sales generation, business development, and related reports.
• Utilize Salesforce as a forecasting tool to ensure accurate and well-maintained records of prospects and clients, while building a strong pipeline of opportunities.
• Support, quote, and negotiate prices, credit terms, contract agreements, and other specifications as needed.

Requirements:

• With 3 years of experience in industrial product selling.
• Exceptional customer service and presentation skills.
• Positive, dynamic and results-oriented

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R23117856

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.