• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Analyse network traffic patterns across identified routes.
• Collect specific measurements across identified routes for analysis.
• Conduct a network infrastructure analysis.
• Conduct threat assessment matrix on network.
• Configure Authentication, Authorisation and Accounting (AAA) services to support remote access protocols based on security requirements.
• Configure a network addressing system.
• Configure hosts and workstations to use IP addresses either manually or through automatic allocation of addresses.
• Configure network devices to provide secure failover and redundancy.
• Debug networking issues to maintain wireless connection.
• Escalate network performance issues to relevant personnel.
• Evaluate user requirements and recommend network protocol services.
• Identify the network components that are required to be installed.
• Install and configure access point to provide wireless access to network.
• Install and configure the components.
• Install firewall appliance for attack guards and intrusion detection.
• Monitor wireless network performance using diagnostic tools.
• Operate network monitoring tools to monitor network performance against thresholds and Quality of Service (QoS).
• Plan control methods for the network for user access management.
• Review network traffic problems with relevant parties for resolution.
• Test the overall network to verify that it meets the agreed requirements.

Job Requirements:

• Diploma or University Degree holder
• Cisco Certificate
• Knowledge in routing, switching, SD-WAN, and vendor technologies (Cisco, Fortinet, etc.)
• Knowledge of Server Architecture such as SANs, Citrix, AD;
• Knowledge in Microsoft server applications, Microsoft Azure Platform as a Service and Microsoft Azure Infrastructure as a Service
• Any relevant professional qualifications are considered an advantage

Job Description & Requirements

Role: Desktop Engineer - End User Computing (EUC)

Work Location: Woodlands & Yishun

Job Description:

Shall provide daily on-site DESKTOP management and support services (“DESKTOP Support Services”) for end-users’ End UserComputing Devices (DESKTOP) which are used in the Customer’s environment with the Customer’s approval. The general scope of Desktop Support Services shall minimally include:

(a) Image build management;

(b) Administration and configuration;

(c) End-user account management;

(d) End-user device hardening and lockdown;

(e) Trouble-shooting and problem resolution; and

(f) End-user briefings & awareness service.

Shall minimally support the following types of DESKTOP:

(a) Desktops;

(b) Notebooks;

(c) Mobile Devices (e.g. iPad, iPhone or equivalent);

(d) Video Conferencing Devices;

(e) IP Telephones;

(f) Printers, including multi-function devices (i.e. printers, scanners and fax devices); and

(g) Other peripherals (e.g. external hard drives, mouse, smart-card readers, monitors, docking stations).

Shall minimally support the following operating systems:

· Windows 7 and later versions of Windows;

· Apple iOS 9.x or later versions; and

· Android OS 5.x or later versions.

Minimum Requirement:

The Level 1 Desktop Support Engineer meet the following requirements:

(a) Minimum one (1) year of DESKTOP Support, ICT End User Computing or Service Desk Agent experience;

(b) Ability to perform the daily DESKTOP Support operations with minimum supervision;

(c) Possess technical skills in supporting existing and new computing devices such as desktops, notebooks and mobile devices;

(d) Possess knowledge in IT networking and LAN to troubleshoot computer problems; and

(e) Possess at least one (1) of the following certifications:

· Microsoft Certified Solution Associate (MCSA) Win7/Win8 or equivalent;

· (ii) Microsoft Certified Technology Specialist (MCTS) in any discipline or equivalent; or

· (iii) CompTIA A+ 220-801/ 220-802, CompTIA PDI+ or equivalent.

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

Job Title: Senior Simulation Engineer - Electrochemical Modeling

Location: NTU-Durapower Advanced Lithium Battery Joint Lab, #02-01, 1 Cleantech Loop, Singapore 637141

Overview:

We are seeking a passionate and experienced Senior Simulation Engineer specializing in electrochemical modeling to join our innovative Battery Material Research Division. This role is crucial in advancing simulation technologies to evaluate and optimize battery performance, safety, and longevity. It emphasizes a hands-on approach to laboratory experiments and leveraging simulation tools to develop cutting-edge lithium-ion and solid-state battery technologies.

Job Scope: Senior Simulation Engineer - Electrochemical Modeling

Key Responsibilities:

• Conduct research into battery working principles and failure mechanisms, developing multiscale and multiphysics-based battery models for rapid performance evaluation and diagnosis.
• Establish and refine electrochemical models, perform parameter determination, and execute numerical calculations and result analyses.
• Explore and implement simulation technologies to assess battery electrical performance, thermal runaway safety, and life prediction, providing actionable insights for the team.
• Utilize simulation outcomes to optimize existing product designs and propose innovative product design strategies.
• Design and execute experiments to generate data for training, validating, and testing battery models.

Key Requirements:

• Bachelor’s, Master’s, or PhD in Mathematics, Physics, Chemistry, Materials Science, or relevant Engineering disciplines.
• Strong foundation in lithium-ion cell electrochemistry and mechanisms.
• Hands-on expertise with battery testing equipment, protocols, and physical-chemical evaluation techniques.
• Proficiency in electrochemical simulation and algorithm development software, such as COMSOL, MATLAB/Simulink, or equivalent tools.
• Practical experience in experimental battery research, including DOE design and analysis. Capability in electrochemical testing and analysis of battery materials.
• Strong analytical and problem-solving abilities.
• Collaborative and detail-oriented mindset, with effective communication skills for cross-functional teamwork.
  

You will be involved in the end-to-end agile development lifecycle for in-house RPA and AI/ ML projects starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Provide mentorship, evaluate submitted problem statements and work with Product Owner and/or Citizen Developers to automate potential day-to-day processes and workflows using Robotic Process Automation and AI/ ML (RPA)

2. Work with UI/ UX Designer as they engage the Product Owner and stakeholders for user research to produce the User Journey Maps and high-fidelity wireframes, which feeds into development sprints (where required)

3. Develop clean, efficient and extendable codes using C, C++, Java and other relevant programming languages, which includes understanding code refactoring and design patterns to reduce and/or eliminate technical debt (where required)

4. Work with Cloud Engineers to setup cloud services for deployment on Government Commercial Cloud (where required)

5. Work with Quality Assurance Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

6. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively (where required)

7. Maintain and update library of reusable code snippets, components and modules

8. Develop technical documentation to guide future RPA and AI/ ML development projects

9. Identify best practices and continuous improvement in deployed automations

10. Conduct RPA and AI/ML-related brown bags and information sessions for staff to share knowledge and increase adoption

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as Python, C, C++, Java and other relevant programming languages.

3. Good technical knowledge and experience working with RPA tools such as Blue Prism, UiPath, etc as well as basic understanding of foundation models from Microsoft, AWS and Google.

4. Participated in at least one full software or product development cycle, preferably using Agile Methodology

5. Excellent communication skills

6. Teamwork and collaboration skills

7. Possess critical thinking and problem-solving skills

• Oversee the installation, configuration, and upkeep of computer hardware, networks, and systems.
• Provide technical assistance and resolve issues related to hardware, software, network connectivity, and printers for end-users.
• Collaborate with users and IT vendors to deliver IT services and solutions effectively.
• Manage and implement data protection protocols and cybersecurity measures, ensuring robust security configurations and regular maintenance.
• Assist in the acquisition, procurement, and documentation of IT assets.
• Offer support for IT infrastructure, including system setup, software upgrades, and the installation of system patches.
• Configure and manage Microsoft 365 services like Exchange, SharePoint, and OneDrive, including user setup, licensing, and essential functions.
• Apply and maintain Microsoft 365 security policies and tools, such as Entra ID, Intune, Purview, Cloud Defender, and Multi-Factor Authentication (MFA).
• Hands-on experience managing Microsoft Windows environments, providing troubleshooting and email support.
• Perform other tasks as delegated by management.

Job Requirements:

• Min Diploma in Computer Science or relevant Degree qualification in a related discipline
• Strong working experience with Microsoft 365 administration
• 4 years of relevant working experience

Check out Aber Care Website for more details.

Interested applicants please email your detailed resume to [email protected]

Abercare.sg | EA License No. 18C9070 | KOH SU WEN, CLARISSA| Registration No. R24119504|

Responsibilities:

• Design, deploy, and maintain machine learning models and algorithms from scratch.
• Implement AI solutions that integrate with existing business systems to enhance functionality and user interaction.
• Manage the data flow and infrastructure for effective AI deployment.
• Collaborate across teams to align AI initiatives with organizational goals.
• Monitor and optimize resources for performance, cost, and security.
• Manage the data flow and infrastructure required for effective AI deployment.
• Troubleshoot and resolve issues promptly.
• Develop and maintain documentation for AI solutions and processes.
• Developing, deploying and debugging IaC code for AI solutions.
• Ensure that AI solutions comply with company security policies and best practices in security.
• Stay updated with the latest AI technologies and best practices.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 3-5 years of relevant experience.
• Strong knowledge of AI frameworks.
• Experience in the Financial Services/Payments industry.
• Knowledge of DevOps practices and tools.
• Experience with infrastructure as code (IaC) tools.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• Relevant certifications in AI technologies can be beneficial.
• Proficiency in Python, Java, and R
• Strong knowledge of AI frameworks such as TensorFlow or PyTorch

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Wärtsilä is a world leader in marine technology and leading the industry's transformation towards a decarbonised and sustainable future. With the world’s widest portfolio and service network, we – Wärtsilians - deliver efficient, safe and sustainable integrated products and solutions to enhance the business of our customers. The opportunities presented through digitalisation and new technologies are offering a new era of shipping. Did you know that shipping is the world’s most efficient mode of transportation and that approximately 90% of world trade is carried by sea?

We want to change the course towards an interconnected and cleaner maritime future and are constantly on the lookout for future-oriented talent to join our team and to work towards enabling sustainable societies through innovation in technology and services - together. Are you ready to jump onboard?

We are looking for a Service Engineer, 2-stroke Services. This is a permanent opportunity, and its location is Singapore.

As a Service Engineer, 2-stroke Services, your responsibilities for the role include:

- Perform Field Service activities according to the work plan

- Perform mechanical/electrical and troubleshooting on 2-stroke engines and ancillary equipment

- Perform technical advisory for repair activities executed on customers' responsibility

- Commissioning of service products

- On-site team leading and managing of the assigned team and related activities during the work execution

- Interact with customers during the work execution

- Interacting with Field Services back office and Technical Services during work execution

- Perform internal and external progress status up-dates of the assigned work

- Ensure that the work is executed according to Wärtsilä Quality, Health, Safety, and Environmental guidelines and customer site procedures.

- Create the Service Work Reports

- Proactively consulting, advising, and promoting available Wärtsilä solutions and products to customer

To be successful in this role, we expect you to have:

- BSC Degree with 2-5 years of working experience in the related field

- Diploma in mechanical, and marine engineering with more than 5 years of working experience in the related field

- Excellent technical knowledge and problem-solving skills

- Good command of English, both written and oral

- Ability to work independently

- Willingness and flexibility to travel up to 80% of the time

- Ability to create internal and external work reports

- Ability to communicate and interact well with customers and other stakeholders

- Literacy in Information Management Applications/ Tools such as MS Office

At Wärtsilä we value, respect and embrace all our differences, and are committed to diversity, inclusion and equal employment opportunities; everyone can be their true self and succeed based on their job-relevant merits and abilities.

This is Wärtsilä

Wärtsilä is a global leader in innovative technologies and lifecycle solutions for the marine and energy markets. Our team of 17,000 professionals, in more than 200 locations in 68 countries, shape the decarbonisation transformation of our industries across the globe. Read more on www.wartsila.com.

Contact & next steps

Does this sound like the job for you? If yes, we hope to hear from you before the application deadline by submitting your application through our careers portal. Are you still wondering if you should apply and would like to get something clarified? Please reach out to David Samuel, Talent Acquisition Specialist ([email protected]) with any questions related to this position.

#FSWSCareers

We are representing our client in the construction and engineering industry in hiring for Senior Procurement Engineer

Responsibilities

• Handle purchase requisitions, quotes, and order placements while tracking order status to guarantee timely delivery.
• Collaborate with project teams to synchronize procurement requirements and uphold internal policies and procedures for adherence.
• Evaluate and select potential vendors and suppliers for M&E equipment, including transformers, cables, switchgears, electrical panels, lighting, and circuit breakers.
• Inspect and assess the quality of purchased M&E equipment and address any issues or discrepancies quickly.
• Assess vendors capabilities, product quality, and pricing to make sound decisions, negotiate contracts for favourable terms, and build new vendor relationships while conducting comprehensive due diligence on key or preferred vendors.
• Collaborate with the Cost Management and Business Development teams to optimize costs while ensuring quality is not compromised.
• Maintain strong connections with current vendor and handle any problems related to deliveries, quality, or pricing.
• Additionally, seek cost-saving opportunities through bulk purchasing or by considering alternative vendors.

Requirement

• Min Diploma in Supply Chain or its equivalent.
• Procurement experience within M&E industry.
• Strong negotiation skills.
• Good knowledge with M&E equipment and industry standards
• Good communication skill to interact with people at all levels.
• Maintaining internal policies and procedures to ensure compliance.

Interested applicants, kindly forward a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required by current employer.

EA License No: 12C6254

EA Personnel Registration No: 1879665

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:
•Requirements gathering.
•Design and develop software applications for embedded devices.
•Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
•Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
•Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual,
Training Manual and others documents as required in the SDLC processes.

•Assist day-to-day application support issues.
•Liaise with users on the requirement testing and production issues.

Qualifications & Requirements:

•Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
•Developed software in at least one full Software Development Lifecycle.
•Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
•Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
•Experience in multi-threading, socket programming and serial/USB communication.
•At least 5 years’ experience in object-oriented software development.
•Familiarity with docker container development and AWS Greengrass is a plus.
•Prior experience in following areas Scrum AGILE methodology process is a plus.
•Scrum AGILE methodology process.
•Develop and integrate embedded devices with cloud platforms.
•Strong analytical and problem-solving skills.
•Good written and verbal communication skills.
•Self-motivated, independent and a good team player.

Portfolio: Microscope

Location: Tai Seng
Salary: Up to $3.3K (Depending on experience & Background) + Mobile and transport allowance

Job Responsibilities

• To arrange service visiting, install, repair, troubleshooting, and re-location on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To install and commission new equipment at customer’s sites.

To practice and enlightenment for Customers satisfaction in service team.

Service administration

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job Requirements:

• Min. Diploma in Engineering
• Min. 1-2 years relevant experience in field service preferably experience in microscope
• Class 3 driving license preferred

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1109557 Rose

• Oversee contract execution and monitor installation progress, ensuring timely delivery through coordination with clients, consultants, and subcontractors.
• Prepare and review method statements, shop drawings, technical submissions, and work progress reports for M&E-related tasks.
• Liaise with stakeholders to resolve technical and site issues, and coordinate with authorities for inspections, testing, and commissioning.
• Assist in procurement of materials, equipment, and labour within budget while supporting project negotiations.
• Apply expertise in Data Centers, DfMA, and specialized systems such as VAV/VRV, chillers, chilled water pipes, and lighting control systems.

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent.
• At least 2 years of experience handling and monitoring the progress of projects in Construction industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Pre-Sales Engineer Physical Security Job Description

The role requires the applicant to design and conceptualise the integration of multiple physical security solutions to ensure solutions are cost effective, scalable and aligned to customers security needs.

Responsibilities:

• Collaborate closely with the sales team to understand the clients requirements for physical security needs and requirements.
• Support and provide technical solutioning and support during the pre-sales process supporting the sales team during tenders for solutioning, costing and validation, including, product demonstrations, technical presentations, proof-of-concept activities, technical specifications, integration plans and compliance.
• Design nd propose comprehensive integrated physical security solutions including but not limited to access control solutions, surveillance systems, ingress protection solutions.
• Collaborate closely with the project team to hand over the design concept, costing, etc for the next phase of project implementation.
• Work together with industry partners and vendors to ensure proposed solutions are robust in design and up-to date.

Qualifications:

• Education: Bachelor’s degree in IT, Security, Engineering, or a related field.
• Experience: 5 years of experience in Integrated physical security pre-sales, system integration, or a related technical field.
• Relevant Skills:
• Team Player with strong analytical and excellent problem-solving skills.
• Ability to multi-task during peak seasons
• Strong presentation and communication skills
• Strong understanding of Integrated physical security platforms and technologies

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever!

We need someone who is passionate about detecting problems, making changes for the better, and seek out innovative ways in how predict device performance! We are an equal opportunity company who values of People, Innovation, Customer Focus, Tenacity and Collaboration.

As Yield Failure Analysis Engineer in Micron NAND Technology Integration (NTI) Singapore department, you will be responsible for providing yield analysis for next-generation Micron products. In this exciting role, you will become a domain expert on physical failure analysis methods for any given electrical failure! You will also participate in the identification and communication of yield issues, assist with the root cause analysis for process deviations, characterize, probe, parametric, and fabrication data to identify the sources of failures.

Your responsibilities will include, but are not limited to, the following:

Perform Failure analysis which includes conducting electrical characterization, perform electrical verification to confirm failures, and understanding PFA techniques available for de-processing failures

Drive failure analysis initiatives for the yield enhancement team. Create and deliver new methodologies, capabilities, and innovative ways for failure analysis de-processing failures

Participate in global meetings and present results to Product Development and Process Integrations teams

Collaborate with metrology and RDA team to re-define and validate inline detection capability

Assist and support the transfer documentation of layout/architecture fundamentals of new technology from R&D to manufacturing fab.

Understand and follow all health, safety, and environmental procedures and requirements.

Successful candidates for this position will have:

• Experience in the semiconductor industry in the areas of Process Integration, Yield Enhancement, Failure Analysis, Data Science, or Unit Process.
• In-depth knowledge and direct experience with nonvolatile memories
• Minimum 4 years of related work experience in yield analysis
• Good understanding of the process flow, and interaction of process and device.
• Poses theoretical and/or operational knowledge of scanning electron microscopes (SEM), focused ion beam (FIB), Transmission emission microscopes (TEM), and Elemental Analysis (EDS, EELS).
• Fluency in Python, JavaScript, C or C++ is Windows, Linux, JMP statistic software is desirable.
• Ability to be self-motivated and self-governing with confirmed ability to work in a demanding and dynamic environment.
• Solid analysis, communication and reporting abilities with demonstrated presentation abilities.

Education:

B.S., M.S., or Ph.D. in Electrical Engineering, Microelectronics, Materials Science, Chemical Engineering, Physics, or a related field. We also consider applicants with equivalent experience.

• Travel Islandwide
• Good Career Growth
• East Region

As a M&E Engineer (Hostile Mitigation), you will be responsible for the following duties:

• Responsible to handle drawing management and control of technical documentation
• Interpret electrical drawing and single line drawings
• Guide the electrical site installation works
• Manage and handle team of electrical workers and assign their installation work
• Executing tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Collaborate with other engineers and technicians involved in the project
• Ensure the quality control of electrical appliances
• Provide electrical engineering support for assigned projects.
• Conduct Corrective Maintenance Activities
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementation of preventative maintenance procedures
• Testing appliances for problems and proposing solutions
• Preparing service & Site Progress Reports
• Preparation of project specific O&M Manuals and asbuilt information’s
• Any other ad-hoc duties assigned by Management

Requirements

• Minimum Diploma in Engineering (Electrical) or equivalent
• At least 2-3 Years of working experience in construction industry
• Knowledge in PLC and Hydraulic System Control will be advantageous

To apply, simply click on the ‘’apply’’ button in the job advertisement or alternatively, you can send in your resume via email: [email protected]

We regret to inform that only shortlisted candidates will be notified.

Job Responsibilities:

• To design, select, implement, test and commissioning the data communication system for Large Scale Rail Transportation in local and oversea
• To conduct Proof of concept, factory acceptance test as well as interface system integration test prior the actual design/ on site implementation.
• To conduct system acceptance test with the customer after implementation prior handling over to the customer.
• To provide high level of system availability, access controls of network resources, technical write-out and updating of the network infrastructure for the project being implemented.
• To pro actively monitor critical system and troubleshoot if there are faults detected from the system through the use of automated tools. (Example: Alcatel Omnivista Network Monitoring tool, HP Openview NMS)
• To configure and install the layer 3 switches (Example: Cisco, Alcatel) with vlan as well as the router for the network setup.
• To liaise with vendors and suppliers for job to be accomplished as well as time schedule of delivery to meet the project timeline.
• To provide relevant documentation write up for the project network design as well as IT security design/planning and etc.

Job Requirements:

• Diploma/ Degree in IT or Computer Engineering related disciplines
• CCNA/ CCNP or other relevant certification will be advantageous
• 1-5 years experience in Networking, Independent, initiative and excellent working attitude
• Experience in Cisco/ Alcatel/ Extreme/Huawei network devices or other devices such as routers, switches, etc
• Experience in routing protocol such as OSPF, MPLS will be an advantage.
• Good communication and interpersonal
• Experience in IT Security design/ planning/ implementation will be an advantage.
• Well organized, proactive and self directed, able to perform with minimal supervision and also a team player.

Job Description

• Industry/ Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: R&D Engineer
• Working Location: Bedok
• Working Hours: Monday – Friday, 8.15 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,000 + Transport Allowance + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Researching electronic components and designing new products to meet market needs.
• Supporting the complete R&D project life cycle and participating in all phases from concept to manufacturing through designing, prototyping, validation, and production of R&D products, taking into account the functionality, feasibility, quality, manufacturability, costs, and completion time.
• Giving concise and informative demos/presentations to other team members or product managers about design concepts.
• Finalizing a design and its deliverables to facilitate a smooth transition to the relevant stakeholders.
• Preparing product documentation like the bill of material, material specification, and process documentation.
• Evaluating processes and design improvements.
• Coordinating with the Global R&D team.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Engineering or Technology (Electrical/Electronics) or equivalent
• Has a minimum of 2 years of experience with passive electronic components design
• Has understanding and work knowledge of AutoCAD Electrical
• A good understanding of product safety, environmental testing, and electromagnetic compatibility (EMC) will be advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69868 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• To participate in the development of a large-scale web application using Microsoft .NET Framework and SQL Server.
• Understands functional requirements from stakeholders and business analysts, and perform impact analysis.
• Develop, unit testing and system integration testing of the application components.
• To support code merging, code compilation and deployment to Development, UAT and Production environments.
• Provide and update software documentation.
• Provide operational support for existing systems by investigating reported issues and resolving them.

Requirements:

• Degree in Computer Science or relevant.
• Minimum 2 years working experience in software development using .NET 4.5, C#, ASP.NET, T-SQL using SQL Server 2012 and onwards.
• Have experience in end-to-end software development life cycle.
• Knowledge in web front-end technologies such as CSS, JavaScript, JQuery, etc.
• Knowledge in code version control process and continuous integration process are required.
• Strong analytic skills and problem-solving skills are required.
• Good interpersonal skills and ability to work in a team-oriented, collaborative environment.
• Good written and verbal communication skills in English.
• Knowledge in Java and Oracle is preferred, but not required.
• Candidates with longer and relevant working experience may be given senior roles.
• Candidates with experience in technical architecting and design may be given lead roles.

NOTE:

By submitting your Curriculum Vitae (CV)/Resume, you agree to your data being used in conjunction with recruitment and employment purposes.

In order to maximize your opportunities to work with us, you are encouraged to keep the information provided accurate, complete and up-to-date.

Our Data Protection Notice for Job Applicants is attached here:
https://www.secur.sg/dataprivacy/data-protection-notice

We DON'T collect any of the following:
1) NRIC/FIN
2) Photo
3) Date of Birth
4) Age
5) Spouse/Family information

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98