SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Descriptions

• To reach the departmental quality target.
• Work closely with the production team and supplier to investigate and troubleshoot for process related problem
• To initiate evaluation and improve the existing process
• Standardize work procedures and provide training to all technicians and operators
• Provide guidance and motivation to all team members
• To answer qualities complaints and any discrepancies that arise
• To prepare a plan for the subsequent quarter and review for MBO (Management by objective)
• To initiate continuous cost reduction activity

Job Requirements

• Bachelor's Degree in Chemical Engineering
• Proficiency in Microsoft Office
• Strong analytical skill problem-solving skills
• Ability to multitask
• Able to handle a few projects at the same time
• Prefer one with at least 5 years of relevant working experience

Responsibilities:

• Be a technical specialist in developing EMS manufacturing solution of Box Build and System Level Assembly capability and capacity to meet customer deliverables.
• Participate in RFQ phase to provide manufacturing quote, to meet customer product specifications and cost expectation.
• Understand customer requirement and develop manufacturing plan of NPI project to meet customer deliverables.
• Execute NPI activities includes project plan (Gantt Chart), process setup, layout & validation and develop the documentation (Process Flow, PFMEA, Control Plan, WI).
• Coordinate and work with Manufacturing Technical Staffs for the First Article run & qualification.

Requirement:

• Diploma/Degree in Mechatronics / Electronic / Mechanical Engineering or equivalent.
  Preferably 3-5 years in Cable Hardness & System Level Assembly and Testing EMS working experience
• Proficient in Microsoft Office (Excel, Power Point)
• Proficient in BOM, 3D CAD and Schematic diagram.
• Experience in FMEA, SPC, DOE and 8D reports.
• Good analytical skill and effective communication with customers and internal stakeholders
• Able to travel occasionally for site support

A REWARDING PLACE

You have the opportunity to work with a creative and collaborative team at the forefront of technology, trends and practices. We are huge advocates for career development and our global operations provide opportunity for professional mobility. Be inspired to grow your abilities, learn from experiences and build the skills you need to forge ahead.

EQUAL OPPORTUNITY EMPLOYER

AEM is an equal opportunity employer committed to promoting and maintaining a diverse, equitable and inclusive environment where differences are valued and encouraged. We employ individuals who align with our values and meet the requirements of the role. All qualified applicants will receive consideration for employment.

The Process Engineer will be based in Changi South reporting to Engineering section Lead.

In charge of process-engineering capabilities focused on cost, quality, and delivery improvements to hold up a manufacturing organization to build state of the art semiconductor equipment's.

Job Responsibilities

• Recognize the manufacturing process, technologies, techniques, and the product.
• Define, implement, and evaluate proposed designs and processes for manufacturability.
• Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process.
• High level participation in daily production activities and effective problem solving on daily issues.
• Prepare justification, purchase and implement capital equipment for production.
• Hold up and oversee new process equipment production.
• Hold up the raising and introduction of engineering change orders (ECOs).
• Establish robust, repeatable, and reproducible process parameters.
• Develop, implement, and take ownership of process control methodologies.
• Trouble shoot process related issues.
• Participate in activities pertaining to cycle time and process improvements.
• Evaluate and select various engineered materials.
• Implement statistical process research on new and existing products.
• Implement safety, productivity and give in improvements.
• Improve manufacturing techniques and throughput.
• Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in.
• Develop and maintain process documentation.
• Review processing methods.
• Interface with production of all activities associated with new process implementation and transfer.
• Assist in the development of training and provide training to production personnel during innovative technology transfer.
• Provide equipment maintenance and repair hold up as required.
• Guide to cost improvement/reduction programs.

Job Requirements

• Typically requires a bachelor's degree in mechanical engineering or manufacturing engineering or relevant field with equivalent experience and training.
• Typically requires 2-3 years of relevant experience.
• Use of the following tools may be required: Electronic Assembly: color code, component, and schematics.
• May require various PCB operations. Testing: oscilloscope, cable and harness testing, trouble shooting, component testing, logic analyzer. Inspection: bare board, systems, components, cable and harness, microscope, measuring tools. Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Those will Electrical & Electronics degree with process / manufacturing experience are welcome to apply.

• Working Location: Jurong Island
• Working Hours: Weekdays, 8am to 430pm
• Transport from Jurong East MRT
• Basic Salary: $4500 - $5500

Objective:
To ensure the safe, efficient, and reliable operation of mechanical systems by overseeing maintenance activities, improving maintenance management systems, and optimizing equipment performance to support operational goals.

Job Scope:

• Oversee and supervise in-house and external contractors for mechanical maintenance activities.
• Manage daily, transition, turnaround, and upgrading maintenance projects.
• Ensure compliance with HSEQ standards, statutory requirements, and industry best practices.
• Establish and improve maintenance management systems to ensure equipment reliability.
• Maintain accurate maintenance records for analysis and troubleshooting.
• Conduct root cause analysis and implement corrective/preventive actions.
• Optimize and manage spare parts inventory for critical and non-critical equipment.

Requirements:

• Bachelor’s Degree in Mechanical Engineering.
• Minimum 3 years of experience in a chemical process plant.
• Familiarity with static and rotating equipment.
• Strong analytical and problem-solving skills.
• Ability to work well under pressure and collaborate across functions.

We regret that only shortlisted candidates will be notified.

Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu

Registration Number: R24124814

EA License Number: 02C4944

People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705

http://www.peopleprofilers.com

Responsibilites

• Facilitate improvement projects initiatives derived from Quality, Process and
  Productivity concerns.
• Initiate process streamline on new device configuration leads to defect prevention.
• Participate with customers status of projects in-line with internal Quality issue improvement.
• Follow-up closely with supervisor & team to monitor improvement project status and closures.
• Perform regular monitoring and audit verification of the committed actionable
• Maintain updating of the relevant QMS system for QA (NPI/QCAR/FMEA/Control Plan).

Requirements

• Degree in Electronics or Engineering or related field.
• Basic knowledge in MS office (Word, Excel, PowerPoint).
• Good communication and interpersonal skills both verbal and written.
• Knowledge in basic manufacturing solving problem tools (8D, FMEA, Control Plan) and statistical tools (SPC) are an advantage.
• Highly motivated to learn new skills / systems / analytical tools used in manufacturing operations.

Excellent execution on assembly process for 1st NPI success and smooth transfer process from NPI to HVM

• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with multi-functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and package

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and apply key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:

• Bachelors/ Masters in Engineering
  
• Showcase leadership experience/potential
  
• Have engaged in projects during internships
• Great teammate
  
• Showcase critical thinking
• Keen interest in Semiconductor industry
  

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

• Well Established Company
• Basic $4000 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working days: Monday to Friday
• Working hours: 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turnkey manager to plan and execute plant shutdown
• Other ad-hoc duties as assigned

Requirements:

• Degree in Chemistry or Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)
EA Recruitment Pte Ltd
EA License No: 21C0492

A Senior/Principal Process Development Engineer is responsible for developing or overseeing the development of chemical processes including low carbon processes as well as monitoring, troubleshooting and optimizing processes in a pilot plant leading up to a technology transfer. He/she will perform process design, engineering and scale-up of in a Low-Carbon Technology Translational Testbed (LCT3) on Jurong Island leading up to a technology transfer. This role requires good understanding and knowledge of the underlying key process/chemical engineering and scientific principles of low carbon technologies and uses computer aided engineering tools such as simulators, process and plant engineering tools for process development and engineering. This individual thinks analytically to solve problems and improve existing methods and processes.

Key Accountabilities

• Responsible for providing scientific and technical direction and/or development, design, and scale up of carbon capture, utilisation and low carbon hydrogen technologies
• Responsible for developing new projects, including timelines, milestones, methodological approaches, expected results and necessary resources.
• Responsible for the executing or planning/directing of laboratory-based or pilot-based experiments to support process development, scale-up campaigns and process optimisation leading up to technology transfer
• Lead or support multi-disciplinary team of scientist and engineers through technical challenges and contribute to the successful completion of projects
• Supervise and mentor junior process development scientists and engineers

JOB REQUIREMENTS

• Doctorate or Master’s degree in Chemical or Mechanical or other related engineering fields.
• Possess at least 10 years of experience in process development and engineering with good knowledge on process control and safety in the process or chemical industry
• Excellent working knowledge on various process technologies, scale-up & scale-down and process intensification methodologies or principles
• Has good working experience with relevant computer aided engineering tools including simulation (eg. Aspen Plus, AVEVA, Gproms etc.), and the use of detailed process models to support process design, scale-up and process optimisation during operations
• Experience in collaborating and has good appreciation with other related disciplines eg. electrical and instrumentation, automation, process safety etc.
• Ability to plan and/or execute experiments at laboratory and pilot scale (scale-up/scale-down) to support process development, troubleshooting and optimisation
• Working experience in a chemical production facility and familiarity with regulations, codes and industry best practices would be a bonus
• Working experience in process/plant engineering tools (eg. AutoCAD process/plant engineering, Aucotec Engineering Base, etc.) would be a bonus
• Possess technical leadership quality to lead team and/or supervise junior engineers
• Possess strong interpersonal, oral and written communication and organization skills
• Self-driven and meticulous individual who has the strong ability to multi-task and has good time management skills to deliver results under tight timelines
• Excellent written and oral communication skills for the timely documentation, presentation, and discussion of results in a fast-paced, multidisciplinary, team-based environment

A Senior/Principal Process Development Engineer is responsible for developing or overseeing the development of chemical processes including low carbon processes as well as monitoring, troubleshooting and optimizing processes in a pilot plant leading up to a technology transfer. He/she will perform process design, engineering and scale-up of in a Low-Carbon Technology Translational Testbed (LCT3) on Jurong Island leading up to a technology transfer. This role requires good understanding and knowledge of the underlying key process/chemical engineering and scientific principles of low carbon technologies and uses computer aided engineering tools such as simulators, process and plant engineering tools for process development and engineering. This individual thinks analytically to solve problems and improve existing methods and processes.

Key Accountabilities

• Responsible for providing scientific and technical direction and/or development, design, and scale up of carbon capture, utilisation and low carbon hydrogen technologies
• Responsible for developing new projects, including timelines, milestones, methodological approaches, expected results and necessary resources.
• Responsible for the executing or planning/directing of laboratory-based or pilot-based experiments to support process development, scale-up campaigns and process optimisation leading up to technology transfer
• Lead or support multi-disciplinary team of scientist and engineers through technical challenges and contribute to the successful completion of projects
• Supervise and mentor junior process development scientists and engineers

JOB REQUIREMENTS

• Doctorate or Master’s degree in Chemical or Mechanical or other related engineering fields.
• Possess at least 10 years of experience in process development and engineering with good knowledge on process control and safety in the process or chemical industry
• Excellent working knowledge on various process technologies, scale-up & scale-down and process intensification methodologies or principles
• Has good working experience with relevant computer aided engineering tools including simulation (eg. Aspen Plus, AVEVA, Gproms etc.), and the use of detailed process models to support process design, scale-up and process optimisation during operations
• Experience in collaborating and has good appreciation with other related disciplines eg. electrical and instrumentation, automation, process safety etc.
• Ability to plan and/or execute experiments at laboratory and pilot scale (scale-up/scale-down) to support process development, troubleshooting and optimisation
• Working experience in a chemical production facility and familiarity with regulations, codes and industry best practices would be a bonus
• Working experience in process/plant engineering tools (eg. AutoCAD process/plant engineering, Aucotec Engineering Base, etc.) would be a bonus
• Possess technical leadership quality to lead team and/or supervise junior engineers
• Possess strong interpersonal, oral and written communication and organization skills
• Self-driven and meticulous individual who has the strong ability to multi-task and has good time management skills to deliver results under tight timelines
• Excellent written and oral communication skills for the timely documentation, presentation, and discussion of results in a fast-paced, multidisciplinary, team-based environment

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

Day Technician

• Work Location: Jurong (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range : $2200 - $2500 + $200( Site Allowance )

Responsibilities:

The Day Technician is responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations.

• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan.
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance.
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator.
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning.
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement.
• Any other duties as assigned.

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Our client is a manufacturer that designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits. They are currently hiring for a Process Engineer and will like to invite suitable candidates to send your detailed resume to [email protected]

Process Engineer

Responsibilities:

• Define and Document Equipment process requirement and specification.
• Perform Process characterization to optimize critical process paths in order to meet equipment specification.
• Review, simplify and optimize Internal Buy Off specification for equipment together with Quality Assurance Department.
• Participate in continuous process improvement activities to enhance Equipment capability.
• Support Equipment manufacturing activities by helping to trouble-shoot and resolve process-related issues
• Support other internal departments to handle customers’ process related issues and recommend technical solutions
• Perform data analysis using statistical techniques and conduct process capability studies
• Transfer process knowledge to in house Engineers and Technicians to ensure optimal equipment performance.
• Equipment UPH projection calculation base on specific process parameter.

Requirements:

• Degree in Production / Mechanical / Material Science Engineering
• At least 3 years experience in an equipment manufacturing environment with a process engineering and background
• Strong interest in the development of new manufacturing processes
• Experience in process design and control in the area of laser marking process.
• Knowledge in Material Science will be added advantage.
• Knowledge in cycle time calculation.
• Trained in SPC, DOE and other statistical tools

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Why Patients Need You

Our breakthroughs would not make it to the hands of patients without our pharmaceutical manufacturing team. We rely on a team of dedicated and agile members, who understand the importance and impact of their role in Pfizer’s mission. Patients need colleagues like you who take pride in their work and always look to improve outcomes. You will help to ensure that patients and physicians have the medicines they need, when they need them.

What You Will Achieve

You will be operating automatic and manual chemical process equipment of varying complexity in various production processes in accordance with operating procedures. You will perform quality control analyses as required to complete in-process batches and identify variations. You will be trained in hazardous material handling and emergency procedures as these processes may generate high pressure and/or critical reactions.

As part of technical operations, you will be a team member who is relied to have a good understanding of procedures, techniques, tools, materials and equipment. Your decision making will help you prioritize workflows based on the available resources. You will follow standard procedures to complete tasks, some of which may vary in scope, sequence, complexity and timing. You will contribute to the team’s success by sharing your previously acquired knowledge.

It is your hard work and focus that will help in making Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Manage own time and professional development, be accountable for own results and prioritize own workflow.
• Operate automatic and manual chemical process equipment of varying complexity in various production processes in accordance with operating procedures.
• Perform duties required in operating a variety of equipment used in your assigned area of the division, maintaining responsibility for tasks as assigned.
• Operate process equipment, such as filter presses, pumps and agitators.
• Participate in quality and safety incident investigation.
• Troubleshoot all operating deviations and issues and coordinate with other function when required.
• Complete all documentation according with Good Manufacturing Practices {also cGMP} and Good Distribution Practices {part of GxP} standards.
• Responsible for preparation and clearing of equipment for maintenance work.
• Perform material receiving, staging, transfer, dispensing, sampling, and charging operation.
• Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process.
• Maintain Pfizer standards and values for quality, safety and environmental objectives as well as meeting production goals.
• Complete all trainings by attending scheduled training.

Qualifications

Must-Have

• High School Diploma or GED
• 2+ years of experience
• Knowledge of industry practices and standards
• Ability to work in a team environment and have good interpersonal skills is essential.
• Effective written and oral communication
• Computer Skills, such as Microsoft Applications and experience with System Application & Products

Nice-to-Have

• Bachelor's Degree
• Experience in a chemical or formulation manufacturing environment

Job Responsibilities

• Act as first level support for the process dicing team.
• Support daily wafer dicing operation that includes wafer mounting, saw dicing, inspection duties.
• To support in shifty lot disposition activities
• Follow through the established work instructions and work procedures on all work performed.
• Work with responsible engineers in dicing operation for quality control, process control and continuous improvements in dicing processes and procedures.
• Document and report any nonconformal event and assist root cause analysis.
• Attending to day-to-day dicing issues, perform troubleshooting.
• Coordinate with equipment team on maintaining equipment in good operating condition and in calibration.
• Assist in providing briefing, guidance and training to production team in regard to dicing process and control
• Participate in project DOE (Design of Experiment) initiatives by process owners and suggest improvement ideas, potentially helping to develop and implement them.
• Actively demonstrate a passion for continuous learning.
• Any Other ad hoc duties as assigned.

Job Requirements

• Minimum Higher NITEC or Diploma in engineering or related fields.
• Entry level candidates are welcome to apply.
• Must be able to commit to perform 12 hours rotating shift and work in cleanroom environment.
• Good communication and documentation skills
• Strong problem solving and systems issues troubleshooting skills
• Good Team Player and able to work independently

Following Requirements Are a Plus

• Experience with Accretech and Disco mechanical and stealth Dicers
• Hands on with manual dicing process (Semi-Auto Cutting)
• Knowledge of SPC and FDC metrology systems
• Use of digital microscope and metrology tools
• Basic computer proficiency using Microsoft Office Suite (Word, Excel & PowerPoint)
• Strong communication skills coupled with basic arithmetic knowledge.
• Ability and desire to work in a team environment

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Responsibilities

• Process module ownership involving regE process characterizations and advanced process developments for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop regE processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer regE processes to high volume manufacturing (Fab10), and work on continuous improvements to manufacturability.
• Address specific wafer edge issues (such as bevel defects, uniformity issues), working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving regE process margins required for meeting the mature yield goal for 3D NAND parts.
• Initiate and manage experiments to widen regE process margins as well as to test out manufacturability of next node solutions
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Bachelors’ degree or higher in Materials Science, Chemical Engineering or Physics with minimum 2 years hands-on experiences in relevant regE process developments.
• Familiarity with regE process developments and yield improvements.
• Understanding of various integration and structural impacts and constraints related to wafer edge.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization/development to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with equipment/material suppliers to achieve yield, quality, cost and risk management objectives.

Micron’s NAND Technology Integration (NTI) Singapore R&D group is looking for process development engineer to support R&D activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 3 years hands-on experience in leading edge film deposition/implant technology work. Fresh PhD/Masters graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are also welcome to apply.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Review and analyze experimental process flows: Identify defect anomalies and quarantine out-of-control process tools.
• Embrace continuous improvement: Seek ways to enhance operations
• Raise awareness of process anomalies: Recognize and communicate issues promptly.
• Leverage inline process signals: Drive process improvements using real-time data.
• Explore new inspection tools and strategies: Aim for earlier problem detection and source identification.
• Innovate with existing tools: Develop techniques to identify relevant process issues.
• Manage image classification models: Enable automated reporting systems.
• Collaborate with the global network to develop best-known methods and maintain alignment between sites.

Requirements:

• Bachelor’s/ Masters in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Capable of international travel up to 3-5 months
• Good communication skills (verbal and written)

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.