• Responsible (review and check) Process Engineer/s and Process Supervisors works.
• Define System Design Deliverables and review with leads to finalise that suit to the project.
• Scope of works to review with leads and get confirmed with client.
• Develop and / or review design documentation as per Deliverable List with leads e.g. Process Flow Diagrams Piping and Instrumentation Drawings, System Layouts, Equipment and Instrumentation data sheets.
• Review and participate in tendering activities (tender preparation, tender interview/clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor documentation to ensure compliance and completeness in technical scope.
• Brief Process Engineers/Supervisors on the project scope and ensure system complete on schedule.
• Participate in Risk and Process Hazard Analysis.
• Prepare budget and cost estimations.
• Mentor and provide guidance to Process Engineers in their work.
• Support implementation of Engineering Efficiency activities.
• Plan, organise and approve Inspecting and Test Plant, Inspection Qualification and Testing and Commissioning.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Promote safe work practises.
• Promote commercial awareness.
• Participation in providing inputs to Knowledge centre and utilization of temp plates, materials.
• BIM Modelling internal reviews with BIM/CAD Team , CSA & MEP counter parts and review with client for LOD 400, 450 and 500
• Ad-hoc duties as determined by Management.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• With 6 - 8 years of relevant experience
• Experience in design and/or construction in either Deionised/Ultrapure Water or Wastewater or Chemical or Gas Systems
• Experience in leading team in throughout project cycle start from concept design, detail design, construction, testing and commissioning, handing over.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Description

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Diffusion team on the key technology issues that need Technology Development (TD) breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise TD Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.
• Ownership of module business process

Requirements

• PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are welcomed to apply.
• Minimum 4 years of relevant experience in Diffusion process development.
• A deep understanding of flow dynamics , thermodynamics, physical phenomena and their direct application to Diffusion deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2 - 4 months at a stretch to work on technology development

Our client is a top global pharmaceutical company.

Key Responsibilities:

• Operate automatic and manual chemical process equipment in production processes, following standard operating procedures.
• Perform quality control analyses and troubleshoot operational issues, coordinating with other functions as needed.
• Maintain equipment, prepare for maintenance, and handle materials (receiving, staging, dispensing, sampling).
• Complete documentation according to GMP and GxP standards and contribute to safety and quality incident investigations.
• Ensure continuous manufacturing by liaising with other departments and meeting production goals.
• Manage time, prioritise tasks, and maintain professional development.

Key Requirements:

• 2+ years of relevant experience with knowledge of industry practices. Fresh graduates will be considered.
• Experience in chemical or formulation manufacturing with knowledge of API and GMP.
• Driven and team-oriented with good communication and interpersonal skills.
• Must be comfortable with rotating shifts.

If you have what it takes, please send your resume to [email protected] or click APPLY NOW. For more information, please visit www.ambition.com.sg.
Data provided is for recruitment purposes only. Regrettably, only shortlisted candidates will be notified.
Business Reg No : 200611680D | Licence No : 10C5117 | EA Reg No : R2199023

What's It Offer?

• Salary: Basic $1,800 - $2,800 + Fixed Allowances of $1000 + Night Shift Allowance
• Location: Jurong Island
• Benefits: Permanent Role with AWS and Variable Bonus

Who Can Apply:

• NITEC or Diploma holders in Chemical or Chemistry-related fields.
• Experienced candidates can be consider for senior positions.
• Willing to perform 12 hours shift

Key Responsibilities:

• Operate the plant and site services safely and efficiently following instructions.
• Suggest and implement safety and efficiency improvements.
• Communicate effectively with team members and other site functions.
• Perform routine maintenance and prepare equipment for service.
• Conduct analytical testing as required.
• Uphold safety standards and respond to emergencies when necessary.
• Train and coach new recruits.

Triton AI Pte Ltd
Registration Number: R1983718
EA: 21C0661

This client company specialized in Precision Surface Finishing Equipment.

Job Highlights

• Location: Ang Mo Kio
• Working days: Monday to Friday
• Working Time: 8.30am to 6.15pm
• Benefits: AWS & Bonus included

Job Responsibilities:

• Perform Lapping & Polishing process
• Machine installation and training

Job Requirements:

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering
• Knowledge of Mitsubishi or Siemens PLC is added advantages
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing
• Training will be provided
• Can read technical drawing
• Able to use the measuring tool example micrometre, height gauge, CMM
• Any knowledge on using Auto Cad

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Descriptions

• To reach the departmental quality target.
• Work closely with the production team and supplier to investigate and troubleshoot for process related problem
• To initiate evaluation and improve the existing process
• Standardize work procedures and provide training to all technicians and operators
• Provide guidance and motivation to all team members
• To answer qualities complaints and any discrepancies that arise
• To prepare a plan for the subsequent quarter and review for MBO (Management by objective)
• To initiate continuous cost reduction activity

Job Requirements

• Bachelor's Degree in Chemical Engineering
• Proficiency in Microsoft Office
• Strong analytical skill problem-solving skills
• Ability to multitask
• Able to handle a few projects at the same time
• Prefer one with at least 5 years of relevant working experience

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Job Responsibilities:

• Design Gas Compression package, Power Generation package, Process Module (dehydration, refrigeration, seawater treatment system, etcs), for oil & Gas production facilities, ie FPSO, FPU, offshore fixed platform, etcs.
• Coordinate with other engineering disciplines to ensure compliance with standards (API, DEP, etcs) and clients’ specifications.
• Collaborate with clients and principals for design optimization.
• Participate in technical meetings (Hazop, Technical Clarification meeting), may require overseas travel.
• Any other ad-hoc as assigned

Job Requirements:

• Minimum Diploma / Degree in Chemical Engineering or Mechanical Engineering.
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• In house & overseas training will be provided if required.
• Able to work independently in a flexible, dynamic and fast-paced environment.
• Positive working attitude.

Working hours: 8am to 5pm

Transport provided at the nearest MRT.

For keen applicants, please email [email protected]

Responsibilities

• Documenting and definng the Factory & Production processes and procedures across the Group
• Recommend and implement improvements to process and process automation
• Deploy and implement the Production processes and procedures in Singapore and overseas
• Manage the next-gen production system for switchgear manufacturing and assembly
• Responsible for the Audit and Compliance of Factory and Process Engineering across the Group
• Any other duties related to operations and process engineering

Requirement

• Degree/Diploma in Electrical, Mechanical Engineering or related field
• At least 2 years of relevant working experience in process engineering in the manufacturing environment
• Have initiative, able to work independently
• Possess strong analytical and problem solving skills
• Good communication and written and presentation skills
• Able to travel overseas

Responsibilities:

• Review and analyze experimental process flows: Identify defect anomalies and quarantine out-of-control process tools.
• Embrace continuous improvement: Seek ways to enhance operations
• Raise awareness of process anomalies: Recognize and communicate issues promptly.
• Leverage inline process signals: Drive process improvements using real-time data.
• Explore new inspection tools and strategies: Aim for earlier problem detection and source identification.
• Innovate with existing tools: Develop techniques to identify relevant process issues.
• Manage image classification models: Enable automated reporting systems.
• Collaborate with the global network to develop best-known methods and maintain alignment between sites.

Requirements:

• Bachelor’s/ Masters in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Capable of international travel up to 3-5 months
• Good communication skills (verbal and written)

We are looking for a highly motivated, ambitious, result driven individual with strong work ethic and integrity to join us as a Photolithography Process Development Engineer/Senior Engineer in NAND Technology Integration (NTI) R&D group. You will be using state of the art equipment to support activities associated with rapid deployment of technology nodes, process margin improvement activities and ensure extended engagement with manufacturing on the upcoming technology nodes.

You are responsible for, but are not limited to, the following:

• Develop and optimize lithography processes to meet yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing photolithography team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Collaborate with Boise R&D peers on technology adaptation and cost optimization towards upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough.

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.

Possess the above qualities ? Join Us !

Job Responsibilities

• Advanced process development tasks SEM CD, OCD or other metrology techniques in 3D NAND technology.
• Identify and provide solutions for inline detection in collaboration with process engineer and process integration.
• Identify modeling opportunities using metrology and detection data to explain electrical failed signature at probe
• Collaborate with US TD Metro team on technology choices for the upcoming nodes and able to translate future technology device needs into clear equipment roadmap requirements.
• Work closely with the planning team to understand Model-on-record (MOR) impact of new technology. Maintain MOR accuracy to enable successful technology ramp.
• Influence vendor equipment roadmap to enable new technology development in Micron

Requirements:

• Bachelor’s/ Masters in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Good communication skills (verbal and written)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Lead a global team to achieve and maintain outstanding performance and cost in Photo and Metrology as the Director of Photo MAP. Your direct team innovates, develops, deploys and transforms standards for photolithography productivity, overlay control for today and in the future in high volume manufacturing. You will implement to this by focusing on manufacturing big rock performance optimization, and ensure priorities are aligned to Micron business plan and/or strategic objective requirements across manufacturing sites.

Responsibilities:

- Establish your organization and developing your team: build up, train, and enable the collaboration across all collaborators

- Create business strategies and roadmaps together with category collaborator groups to achieve best in class performance and cost

- Partner with key collaborators throughout the photolithography community

- Lead worldwide efforts to enhance product based performance through equipment or applications based improvements

- Engage with both internal and external suppliers to strengthen partnership and lead initiatives to achieve and exceed internal customer expectations

- Lead worldwide efforts to transform VOC (voice of the customer) to enhance business process or standards

- Contribute to global expansion projects in both existing facilities and greenfield sites

- Collaborate with partner organizations across the photolithography community and beyond (partner categories, TD, PIE)

- Create and develop strategic roadmaps in collaboration with collaborator groups

Job Requirements and Skills:

- Demonstrated knowledge of the worldwide factory network functions

- Demonstrated team development and leading strategic, transformative initiatives

- Front End (FE) manufacturing or reticle manufacturing, fab process knowledge

- Personnel and resources management, development and mentoring

- Effective communication at multiple levels of the organization

- Effective project management with exceptional customer focus

- Voracious learner and educator

- 8+ years, direct supervisor experience

- Bachelor's degree in engineering or science fields

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

• Working location: Ang Mo Kio Ind Pk
• Working date and time: 8.30am-6.15am (Mon-Fri)
• Salary: $2,000-$3,000 + AWS + Bonus

Responsibilities

• Perform Lapping / Polishing process, machine installation and training.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering.
• Knowledge of Mitsubishi or Siemens PLC is added advantages.
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Can read technical drawing
• Able to use the measuring tool example micrometer, height gauge, CMM
• Knowledge on using Auto Cad

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Financial Analyst (Business Process Outsourcing), East area

• East area
• START ASAP
• 6 months contract (Extendable and renewable)

Job description:

• Assist the Tower Supervisor in preparing for FCE readiness activities, including user acceptance testing, beta testing, and validation of work, while collaborating closely with the Accenture India team.
• Conduct month-end account reviews, including control account checks and adjustments of journal entries to ensure accurate clearing.
• Track the progress of the financial close process and review the BPO Journal Entry Dashboard to monitor task completion for assigned entities.
• Analyze the Overdue Items Report, follow up with the BPO team, and escalate overdue items when necessary.
• Facilitate pre- and post-close discussions with tower leads to review monthly and quarterly finance activities.
• Review and support journal entries and reconciliation processes.
• Generate BlackLine reports to assess account aging and value, conduct research, and collaborate with the BPO owner to address issues. Develop action plans to resolve R-items exceeding 60 days or $100K.
• Produce GL reports, perform trend analyses, and execute variance analyses.
• Compile and prepare the Tower Close Package, which includes variance analysis with commentary, a risk and issues log, and a balance sheet aging report (R-items).
• Monitor BPO performance against SLA requirements, escalating discrepancies and implementing corrective action plans (CAPs) with the BPO Management Tower Leads.
• Serve as a liaison between UPS stakeholders and the BPO team to address information requests and resolve queries effectively.

Requirements:

• Minimum Diploma or bachelor’s degree in accounting
• Possesses at least 5 years relevant experience in accounting or internal audit or public accounting in any industries
• Applies accounting theory and principles are mandatory

Interested applicants, kindly WhatsApp to 87511349 and email your updated resume to [email protected] and we regret that only shortlisted candidates will be notified

Yvonne Chai Cheng Man

Reg No: R23115356

EA License: 23C2060

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Tuas

Shift work

12 months contract

Job descriptions:

• Loads production equipment and conducts activities
• Documents all the activities executed or to be execute
• Reports any anomalies to instruments or equipment to maintain a high efficiency and safety level in accordance with the Good Manufacturing Practices
• Analyses with the Shift Manager / Production Support unexpected causes of negative trends
• Identifies inefficiencies and wastes paying attention to quality in the operative activities and processes/products
• Other ad hoc duties

Job Requirements:

• Min NITEC / Diploma / Degree in Chemistry / Biology or relavent disciplines
• No experience required as training will be provided
• Candidate with experience will be considered for senior roles

Interested candidates, do submit your reusme to: [email protected]

Telegram me at @jocelynchan

Jocelyn Chan| Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R1331820

What you will do:

The Business Process Analyst will be required to be experienced in use of process automation applications and skilled in constructing business data visualization and reporting platforms that drive innovation and growth for the global logistics and supply chain (GLSC) organization. The ideal candidate shall be proficient in use of robotic process automation (RPA) tools, passionate in analyzing business processes, workflows and procedures to identify inefficiencies, creating and implementing improvement strategies; possess good interpersonal skills including presentation, communication skills to articulate ideas and process changes effectively. Additionally, this person should be a problem solver, enthusiastic with excellent initiative and learning attitude; and embraces challenges in a dynamic environment.

How you will do it:

• Represent the GLSC business to evaluate working processes within enterprise systems and business data analytics platforms in consultation with business owners and technology teams and initiate projects for process improvements
• Lead the development of robotic process automations (RPA) and reporting dashboards, design and execution of UAT and post implementation maintenance plans and recommend business solutions where relevant to ensure deliverables are achieved according to business requirements
• Conducts maintenance and routine checks of business data in enterprise systems and business data analytics platforms and deploy best practices for efficient handling processing, and cleansing of databases

What we look for:

• A good degree or diploma in any discipline.
• Proven relevant working experience in process automation (RPA) tools such as UiPath, Power Automate etc.; experience in other similar RPA tools will be considered
• Practical experiences in construction of business dashboards using basic visualization tools; experience with Power BI is preferred.
• Data domain experience in supply chain planning or supply chain order fulfilment is preferred; preferably with prior experience as a Business/Data Analyst.
• Practical experiences in projects with both business and technical team stakeholders in MNC environment.
• Demonstration of strong ability in applying techniques to analyse data, leading to business-relevant conclusions and present data insights for business decisions.
• Good working knowledge of database structures in at least one major ERP systems, such as SAP, ORACLE or BAAN; and knowledge of SQL query at end user level is a plus but not mandatory. Candidates with no ERP database and SQL query experiences but is keen to learn is encouraged to apply.
• Proven success as a team player with good work ethics and pleasant interpersonal skills

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on the Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.

Our Manufacturing & Supply Division is committed to be the most trusted supplier of bio- pharmaceuticals worldwide. Our facilities, along with our external contractors, suppliers, and partners, create an interdependent global manufacturing network that’s committed to delivering a high quality, reliable supply to customers and patients on time, every time.

Our Engineers support internal and external manufacturing operations remain operational, continuously improve, and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

• The Lead Chemist, PAT (Process Analytical Technology) role provides drug substance and/or drug product PAT (Process Analytical technology) development and testing support for all manufacturing processes manufactured on site including providing technical expertise in the area of PAT to support manufacturing activities on site and transferring of manufacturing activities to other facilities. The Lead Chemist PAT demonstrates advanced skills in developing PAT method and validating methods, implementation strategy and supports investigations involving PAT, as well as providing PAT solutions for process robustness issues and process related investigations for manufacturing processes on site. The Lead Chemist PAT performs all activities in compliance with all regulations, policies, and procedures on site.

Main responsibilities

• Leads the development and implementation of advanced in-line, on-line, and at-line PAT methods for the assessment of chemical and physical product and process parameters. The scope of the contributions includes methods to support development of design spaces on new products, support of technology transfer as well as methods for control either in-process and real-time testing (RTRT) applications including new and established products.
• Utilizes technologies that include but are not limited to spectroscopic techniques, PAT-adapted analytical technology such as online HPLC, online MS, Raman, FTIR Spectroscopy as well as multivariate modelling of process data, as well as further expanding on the PAT tool set to include at line analysis, for e.g., conductivity, pH, refractive index etc.
• Leads and advises others on experimental design and execution, statistical analysis, analytical method development and validation.
• As a subject matter expert in PAT, both theory and practice, provides PAT solutions and technical expertise to support site process robustness issues and process related investigations. Is able to independently problem solve challenging PAT and analytical issues and able to design PAT related experiments with limited guidance to efficiently gain results.
• Has an understanding of the pertinent regulatory guidance applicable to PAT. Lead contributions to regulatory filings and internal scientific as well as internal quality/GMP documents regarding PAT. Act as primary lead of regulatory inspections of PAT installations for the site.
• Supports routine supply manufacture by providing on going PAT technical support to the IPT and proactively monitoring the performance of equipment module(s) or unit operation(s) during manufacturing and cleaning using PAT. Proposes and implements new PAT solutions to support manufacturing, understand shifts and trends and process robustness issues.
• Provides training and coaches/mentors the PTO Engineers/Chemists in PAT related equipment’s.
• Leads collaboration and sharing the best practices with internal/external SMEs (eg CPDC, PCT, ADC, CMSE and other groups within the GSTC network) so as to build PAT and analytical capabilities for PTO.
• Complies with all divisional and site-specific policies, guidelines, and procedures. Making safety adherence as a prerequisite to employment. Demonstrates and promotes safety, health & environment (EHS) leadership behaviors, ensuring that all activities are carried out in accordance with EHS requirements.
• Where applicable, develops and reviews SOPs, gap analysis and Job Aids for PAT within PTO Subsystems in compliance with divisional and corporate policies and guidelines.
• Demonstrate leadership behaviour in alignment with the company’s Leadership standards.
• Practice inclusion as the How and Production Systems (MPS)
• Leads personal career development with manager assistance using myCareer and career mapping (development plan, self-assessment).
• Any other duties as assigned by the Supervisor.

Qualifications

• Bachelor, Master or PHD in related technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences
• Minimum 4 years technical experience in pharmaceutical manufacturing industry
• Expert knowledge of core technology/unit operations relevant to active pharmaceutical ingredients, Biotech and/or Non-Sterile drug product manufacturing.