Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Requirements:

1. Proficiency in SolidWorks for creating in-process models, process sheets, and operation instructions.
2. Experience with SolidCAM software for generating NC programs for 3- and 4-axis machines.
3. Familiarity with Mazak and Fanuc controller systems. (NC Program)
4. Strong understanding of GD&T (Geometric Dimensioning and Tolerancing) in technical drawings.
5. Excellent communication skills in both English and Chinese.
6. Proficiency in Microsoft Excel, Word, and PowerPoint for preparing documentation.
7. Minimum of 3 years experience in precision engineering.

A Process Engineer specializing in powder coating oversees and optimizes the powder coating process, ensuring high-quality finishes and efficient, cost-effective production.

Work Location: Woodlands

Working hours: 830 - 530 (Mon to Fri)

Job Responsiblities

1. Process Design and Optimization Design and develop powder coating processes to improve efficiency, product quality, and cost-effectiveness. Optimize powder coating application parameters (e.g., thickness, adhesion, curing time) to ensure consistent, high-quality finishes. Implement best practices for color changes, coating uniformity, and waste reduction.

2. Quality Control and Compliance Set up quality control checks to monitor coating thickness, gloss levels, and durability. Conduct root cause analysis for defects such as orange peel, uneven coating, and contamination, implementing corrective actions. Ensure processes adhere to relevant standards (e.g., ASTM, ISO) and industry regulations on environmental safety and emissions.

3. Equipment Management and Maintenance Oversee the maintenance, calibration, and performance of powder coating equipment, such as spray guns, curing ovens, and booths. Work with vendors and maintenance teams to source and maintain equipment and ensure minimal downtime. Ensure that equipment settings are correctly adjusted for different product specifications and powder types.

4. Troubleshooting and Problem-Solving Diagnose and resolve issues such as coating defects, equipment malfunctions, or process inefficiencies. Develop contingency plans to minimize production disruptions. Collaborate with cross-functional teams (e.g., quality assurance, production, and maintenance) to address and resolve coating-related issues.

5. Process Documentation and Reporting Maintain detailed documentation of the powder coating processes, parameters, and changes. Create reports on process efficiency, quality metrics, and improvement initiatives. Develop standard operating procedures (SOPs) for powder coating applications and updates.

6. Continuous Improvement Initiatives Lead initiatives to improve process efficiency, reduce powder usage, and minimize waste. Utilize Lean, Six Sigma, and other continuous improvement methodologies to identify and address process bottlenecks. Conduct regular process audits and implement action plans to achieve ongoing improvements.

7. Safety and Environmental Compliance Ensure powder coating operations comply with environmental regulations, such as VOC emissions and waste disposal. Implement safety protocols to prevent hazards like dust explosions and chemical exposure. Train team members on proper handling and usage of powder coating materials and equipment.

8. Project Management and Coordination Manage powder coating projects, such as new product lines, equipment installations, or process upgrades. Coordinate with departments such as R&D, production, and quality to align process capabilities with business needs. Develop project timelines, resource plans, and budgets to ensure project objectives are met.

Requirements

- Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or Industrial Engineering, or related field.

- Minimum of 2-5 years in powder coating or a similar surface finishing process.

- Familiarity with powder coating equipment and materials, process control, and quality standards.

Sophia Lu

R1100200

06C2812

Company Profile

M3’s client is an established company with many years of experience in the spray painting and powder coating services in Singapore. Looking to expand a new line production line for Sheet Metal.

Company Location

Woodlands

Working Hours

Mon – Fri: 830am – 530pm

5 day work week

Job Responsibilities

• Develop and optimize sheet metal manufacturing processes such as cutting, bending, stamping, punching, forming, welding, and assembling.
• Select appropriate tools, machinery, and materials for production.
• Create and refine process documentation, including process flowcharts, work instructions, and standard operating procedures (SOPs).

Job Requirements

• Technical Knowledge: Expertise in sheet metal materials, properties, and forming techniques.
• CAD/CAM Proficiency: Familiarity with software like SolidWorks, AutoCAD, or similar for design and simulation.
• Able to interpret engineering 2d Drawings.

Sophia Lu

R1100200

Senior Recruiter

Your new company

My client (Central area) is recognized as a global leader in private wireless systems, being the go-to partner for Fortune 500 companies and industry innovators. Join their award-winning team and be part of a legacy of excellence!

Your new role

Join their innovative QA team as an Industrial Process Engineer, where you'll play a crucial role in optimizing electronic manufacturing processes. Collaborate with cross-functional teams to design, develop, and implement efficient, high-quality, and cost-effective processes.

Below are some of the key responsibilities for the role;

• Spearhead process development and optimization initiatives to enhance electronic product manufacturing
• Drive continuous improvement using Lean, Six Sigma, and other methodologies
• Oversee equipment management, installation, and maintenance for optimal performance
• Create and maintain detailed process documentation and provide training to production staff
• Ensure seamless integration of new processes and technologies with design engineers, production teams, and quality assurance
• Guarantee safety compliance and adherence to environmental standards

What you'll need to succeed

The successful candidate, should have;

• Bachelor's Degree in Manufacturing Engineering, Electrical Engineering, or a related field
• 3-5 years of experience in electronic manufacturing process engineering
• Proficiency in process simulation software, statistical analysis tools, and Python
• Strong problem-solving skills, attention to detail, and excellent communication abilities
• Knowledge of Lean Manufacturing, Six Sigma, and industry standards

What you'll get in return

• Joining a company that is at the forefront of their industry
• Being part of a team that's dedicated to innovation and continuous growth
• Working with the latest technologies, tools, and methodologies to develop innovative solutions

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

The key functions of Process Engineer is to:

• Applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organization objectives
• Analyse and troubleshoots process engineering, manufacturing and /or maintenance issues and recommends engineering solutions, and develops work instructions for out of control processes
• Leads production and manufacturing systems improvement projects, and develops operation plans in accordance with organization objectives and other regulatory requirements.

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Mechanical /Microelectronics / Chemical Process / Chemistry / Physics/ Material Science/Material Engineering
• Min 7 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capabiity to lead and guide junior engineers
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Job Description

• Industry/ Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job details

Salary

$3,000 a month

Job type

Full-time

Responsibilities: -

• Provide technical support to Operating Plants for safe & smooth plant operations
• In charge of daily chemical & mechanical processes.
• Initiate and implement plans for performance improvement and economic / capacity optimization
• Perform plant simulation to identify high return opportunities to business team
• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to Plant instability, Safety or Quality issues.
• Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.
• To in charge of equipment calibrations.
• To update production output regularly.
• All other ad-hoc duties as assigned

Requirements: -

• Min Diploma or with min 3 years relevant working experience can be considered as well.
• Competency in Microsoft applications including Word, Excel and Outlook.
• Able to liaise with English and Mandarin speaking customers
• 5.5-days work week.
• Location: Tuas South
• Able to start work immediately
• PR/Singaporean

Please note that only shortlisted candidates will be notified.

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Provide process engineering expertise for process design, process scale-up, trouble-shooting and process efficiency improvements. Interrogate laboratory working directions to determine optimum plant configuration to ensure that the process [chemistry + plant] meets the scale-up objectives in a safe manner. Support capital projects for R&D Jurong.

Key Responsibilities

Lead process engineering activities for NCE projects in the pilot plant

• Review of chemistry scale-up requests with Chemists, Operations and Engineering to determine optimum plant configuration.
• Define detailed plant and modification design. The time period for introducing new chemistry onto plant is usually less than 4 weeks, during which time any new equipment requirements must be identified, designed, fabricated, installed [by on-site staff or contractors], commissioned, tested and operating staff trained in use before chemical processing starts.
• Agree level of hazard assessment with Operations and complete Process Risk Assessment.
• Review batch record, carry out installation checks, write WI [Work Instruction] or SOP [Standard Operating Procedure] as required and train operators.
• Support campaign on plant, troubleshooting any engineering issues.

Technology Transfers

• Generate sufficient process engineering information for GSC to ensure that the process can be effectively introduced into the desired production plant.
• Support synthetic organic chemists, process safety scientists, and process chemists in the design of processes suitable for effective scale-up.
• Assess critical process characteristics and requirements as well as existing plant capabilities and limitations by gathering and interpreting suitable experimental data.
• Significantly contribute to the development of robust manufacturing processes for the synthesis of bulk drug substance by evaluating alternative processing strategies and recommending potential process improvements.
• As a member of the ChemDev project team, identify and effectively communicate the best suitable scale-up strategy for a process including recommendations for the application of new processing technologies.
• Play an important role in facilitating a seamless technology transfer of processes to GSC by the application of state-of -the-art tools and procedures.

Capital Projects

• Act as client representative for capital projects, to ensure all the customer needs are incorporated into the design and installation of new plant and equipment.
• Identify areas of weakness in the portfolio of processing technologies (plant and equipment) and submit proposals to address these.
• Define and seek approval for the detailed project scope of plant and equipment projects, and obtain approval for capital orders and PIP's.
• Review and make recommendations on design proposals put forward by contractors, project engineers, and equipment suppliers.
• Organise HAZOP studies, act as technical recorder, and issue HAZOP report for all installations where appropriate.
• Issue commissioning programmes, lead commissioning activities, and issue final reports.
• Carry out pre-delivery inspection visits for new equipment, prior to acceptance on site.
• Compile equipment WIs.

Knowledge, Skills & Experience

• Min A level certification
• Experience in pharmaceutical industry
• Experience in pharmaceutical process
• In depth working knowledge of the safety and compliance requirements for equipment and systems used in it.
• Strong written and verbal communication skills.
• Ability to multi-task and prioritize workload

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

(A) Primary Function

1. Responsible for all engineering related activities of the product line concerned.

2. Responsible for quality of products at all stages and drive production yield.

3. Identify and initiate actions to prevent occurrence and recurrence of product, process, quality systems nonconformities.

4. Work as a team with all departments to achieve mutual agreement on specification required by customers.

5. Ensure all products meet the standard cycle time and minimise machine and mold down time.

6. Implement improvement plans to enhance efficiency of process, material and manpower.

7. Responsible for new RFQ enquiry and advise the management the feasibilities for mass production.

8. Responsible for resolving discrepancies and technical issues related to product with customers.

(B) Duties and Responsibilities

1. Establish optimum process parameters and meeting specific cycle time for new product.

2. Analyze defect reported in-house and customer with quality, tooling and production.

3. Responsible to test and qualify all new molds by applying systematic molding that includes Load Senstivity Test, Viscosity/Shear Rate Test, Gate Freeze Test, Thermal Mapping of Mold, Short Short Test etc.

4. Must perform DOE on molding process parameter for process window study.

5. Attend to all daily quality and process related issues.

6.Prepare and execute process validation protocols and reports for new and existing products with tooling and quality personnel for all customers.

7. Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

8. Perform internal quality system audit.

9. Train and assess production staff on processes as well as WI as and when required.

10. Attend routine production and quality meetings.

11. Execute engineering change notice from customer/ in house and update ERP system promptly.

12. Compliance to all regulatory and in house system requirements especially for medical and automotive customers.

C) Qualifications / Requirements

1. Degree/Diploma in Engineering-related discipline, preferably in Polymer and Plastic technology, Mechanical.

2. At least 3 years related experience/knowledge in Plastic Injection Molding, preferably in medical and automotive industries.

3. Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.

4. Possess strong leadership, positive attitude, analytical and good interpersonal skills.

5. Results-oriented, meticulous and a self-motivated team player.

Duties & Responsibilities

1.Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.

2. Implement Process Improvement idea via Management of Change system and/or Non-regular work system.

3. Coordinate, arrange and plan new grade trial run with R&D and Operation team, and handle the trial run and the evaluation.

4. Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to plant instability, safety or quality issues.

5. Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.

6. Participate actively in HAZOP , FMEA and Control plan studies as Process engineering function for safety and quality improvement.

7. Oversee Process related capital expenditures project from conceptual design up to Front End Engineering Design (FEED) and Lead the project assigned by (assistant) manager of department.

8. Study and implement Industry 4.0 related technologies as part of Productivity Improvements and Process improvement Projects

9. Participate in Company EHSQ program and cooperate with its promotion and improvement.

10. Collaborates with other departments in Management systems such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC plus as process engineering function

11. Perform study as Process Engineering Function such as NRW, MOC and as per request from other departments.

12. Keep and maintain safe and health work environment.

Requirements

1. A Bachelor / Master’s Degree in Chemical Engineering

2. 3 year(s) of working experience in Petrochemical Industries (Preferred).

3. For Senior position, at least 5 year(s) working experience in Petrochemical Industries.

4. Possession of Singapore Certified Energy Manager (Preferred)

5. Familiarity with Safety Case Regime

6. Familiarity with IATF 16949 standard (Preferred)

7. Familiarity with ISO9001, ISO14001, ISO45001 and SS651.

8. Familiarity with IEC 61511 standard (Preferred)

9. Familiarity with Process Simulation software such as Aspen Plus®, Aspen

HYSYS®.

10. Familiarity with Distributed Control System (DCS), in particular its logic and sequence modification.

11. Able to multi-task and handle a wide spectrum of responsibilities.

12. Good interpersonal skills and strong analytical skills.

Job Scope: To contribute as part of a process safety team on a proposal / project, in collaboration with different departments and process safety section, to manage Major Accident Hazards (MAHs) and prevent and mitigate Major Accident Events (MAEs) throughout the lifecycle of the facility.

Responsibilities:

• Develop / Support the development and review of HSSE Design Philosophy, and other process safety-related philosophies. Provide guidance to the proposal / project for compliance to company standards, client and regulatory requirements of safetyrelated systems.
• Develop / Support the development of scope of work, perform safety consultant technical bid evaluation, participate in workshops, plan, review and deliver safety studies / deliverables. Deliver complete, correct, and on-time safety studies and deliverables to the proposal / project, demonstrating risks are As Low As Reasonably Practicable (ALARP).
• Organise Bow-Ties workshops, define SCEs, communicate performance standards requirements, review SCE design, manage tracking and review of EPCI assurance tasks, as instructed by the Principal Engineer, to ensure that safety critical elements are designed, procured, constructed, commissioned, and installed in accordance with performance standards for the prevention and mitigation of MAEs.
• Coordinate and manage risk consultant/subcontractor to ensure the risk of the facility is properly assessed in accordance with the scope of work and methodology, in a timely manner and on budget.
• Collect risk assessment input data, review risk assessments, prepare deliverables, review other discipline deliverables, and collaborate with other disciplines and departments, as instructed by the Principal Engineer or assigned engineer. Issue accurate deliverables, minimizing mistakes and maximizing efficiency. Minimise / manage deviations from company standards, client and regulatory requirements of safety-related systems.
• Contribute to the achievement of Project / Engineering Performance Goals defined for the year / project.
• Collaborate with the proposal / project team, consistently check deliverables for compliance, attend / support audits and resolve non-conformities to deliver a regulatory compliant installation. Minimise non-conformities and delays to first oil.
• Communicate professionally with the client, provide responses to client comments, as instructed by the Principal Engineer, such that the client is satisfied that hazards are managed appropriately.
• Collaborate with the project team to ensure that changes are managed in accordance with the Management of Change Procedure and their impact on risk are properly evaluated.
• Identify and communicate lessons learnt for improved management of MAHs and project execution.
• Ensure technical competencies are met and guide the development of process safety engineers to improve technical competency and soft skills.
• Comply with Group Policy, Code of Business Conduct and Ethics at all times.

Requirements:

• Minimum 7 years of relevant working experience in Process Safety engineering in the oil and gas sector for a bachelor’s degree in Chemical / Environmental / Mechanical Engineering, or minimum 6 years of relevant working experience for a master’s degree, or minimum 12 years of relevant working experience for a diploma holder.

Interested applicants are welcome to submit your MS Word resume to:

[email protected]

EA Personnel: R1109773

EA Licence: 07C3676

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Job Summary

Process & Mechanical design, design review, RFQ preparation, technical evaluation, site installation supervision and coordination.

Job Description

• Review engineering standards/specifications/drawings, tender, quotations and proposal documents.
• Preliminary and detailed process & mechanical design of chemical plant, incineration plant, food waste plant, water/wastewater plant, offsites & utilities, pollution abatement, etc. including mechanical specification, design calculation, equipment layout design, support design, etc.
• Collaborate with BIM team for 3D model development and ensure the model is according to design.
• Coordination of internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are achieved and exceeded.
• Prepare mechanical equipment requisitions and to ensure that the items procured are in accordance with specifications and schedule to ensure timely delivery.
• Technical review of mechanical equipment/system vendors proposal and submission.
• Coordination with equipment/system vendors on mechanical design and installation work during project execution stage.
• Prepare mechanical technical submissions and work with design lead to liaise with stakeholders, not limited to client/project consultant for submission approval.
• Prepare method statement for all the equipment installation
• Support during construction, installation, start-up, testing and commissioning activities.
• Ensure compliance & perform any other duties as requested by design lead/ engineering management.

Requirement

• Bachelor’s degree in Chemical or Mechanical Engineering or related engineering discipline.
• 3 years and above in process & mechanical design in process plant (such as chemical plant, incineration plant, food waste, water/wastewater plant, offsites & utilities, ACMV, pollution abatement, etc) and hands on experience working in fast paced, diverse and multi-disciplined projects and O&M activities.
• Familiar with process & mechanical design code of practice and standards in Singapore, EN, ASME & PED.
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

• Responsible (review and check) Process Engineer/s and Process Supervisors works.
• Define System Design Deliverables and review with leads to finalise that suit to the project.
• Scope of works to review with leads and get confirmed with client.
• Develop and / or review design documentation as per Deliverable List with leads e.g. Process Flow Diagrams Piping and Instrumentation Drawings, System Layouts, Equipment and Instrumentation data sheets.
• Review and participate in tendering activities (tender preparation, tender interview/clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor documentation to ensure compliance and completeness in technical scope.
• Brief Process Engineers/Supervisors on the project scope and ensure system complete on schedule.
• Participate in Risk and Process Hazard Analysis.
• Prepare budget and cost estimations.
• Mentor and provide guidance to Process Engineers in their work.
• Support implementation of Engineering Efficiency activities.
• Plan, organise and approve Inspecting and Test Plant, Inspection Qualification and Testing and Commissioning.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Promote safe work practises.
• Promote commercial awareness.
• Participation in providing inputs to Knowledge centre and utilization of temp plates, materials.
• BIM Modelling internal reviews with BIM/CAD Team , CSA & MEP counter parts and review with client for LOD 400, 450 and 500
• Ad-hoc duties as determined by Management.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• With 6 - 8 years of relevant experience
• Experience in design and/or construction in either Deionised/Ultrapure Water or Wastewater or Chemical or Gas Systems
• Experience in leading team in throughout project cycle start from concept design, detail design, construction, testing and commissioning, handing over.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Qualifications

• Education: Degree in Manufacturing Engineering, Electrical Engineering, or a related field.
• Experience: Minimum of 3-5 years of experience in electronic manufacturing process engineering.

Required Skills:

• Proficiency in process simulation software and statistical analysis tools.
• Strong problem-solving skills and attention to detail.
• Excellent communication and teamwork abilities.
• Knowledge of Lean Manufacturing, Six Sigma, and other continuous improvement methodologies.
• Familiarity with industry standards and regulatory requirements.

Preferred Certifications:

• Certified Manufacturing Engineer (CMfgE)
• Six Sigma Green Belt or Black Belt
• Professional Engineer (PE) license

This role is to support global business processes across sales, factories and business unit organizations, with a focus on assembly pricing activities. We are looking for a resourceful teamplayer who is adept at utilizing and integrating data from multiple systems to put together pricing proposals. The candidate should be highly adaptable to changing business needs and possess strong analytical skills. This position is based at our Regional Singapore office.

Core Responsibilities

• Focus on OSAT pricing and costing activities for assembly packaging.
• Key responsibility for the initial 3 months will be on daily production price maintenance duties, and approving pricing issues in SAP
• Responsible on cost models preparation to provide cost estimates and manufacturing readiness inputs to business unit, engineering and factory.
• Respond timely to relevant pricing requests in RFQ systems through price benchmarking and profitability analysis.
• Oversee RFQ trend, win/loss effectiveness and RFQ cycle time efficiency
• Support critical meetings with internal cross functional teams on product costing
• Partner with Business Units, factories, and sales to assure integrated and profit maximizing approach.
• Adhoc analysis of various revenue related items

Job Specifications (Qualifications/Experience/Skills & Knowledge/Personal Qualities)

• BS degree in Engineering.
• Minimum 5 years of relevant experience in semiconductor industry.
• Knowledge in assembly packaging processes will be preferred.
• Familarity with SAP system.
• Advanced Excel skills and ability to manipulate large data set is a must.
• Strategic thinker with a proven ability to translate technical requirements/issues into the business context or vice versa.
• Excellent communication and presentation skills, both verbal and written
• Independent, able to multi-task, and collaborate with cross functional and cultural groups.

Interested applicants, please kindly email your update resume to [email protected]. We regret to inform that only shortlisted candidates will be notified.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Equipment – CQV Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Experience in conducting equipment/facility FAT/SAT, IQ/OQ/PQ protocols, and serving as both author and executor of QSR (KAYE validator).

· Proficient in writing PQ, cleaning, development/study protocols, SOPs, and work instructions.

· Responsible for raising Change Control requests, identifying tasks, and performing impact assessments, with a focus on processes and process equipment.

· Experienced in writing deviations related to processes, cleaning, and process equipment (PQ).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/