Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

Responsibilities:

• Responsible for Line sustaining activities and new device process development/evaluation for wet related processes
• Support NPI for any gap analysis and new device safe launch monitoring
• Wet Process recipe creation based on device requirements
• Perform wet process window study and provide improvement plan to reduce OOC and improve CPK
• Lead continuous improvement projects & device qualifications using APQP approach
• Work with Quality Management department to address customer inquiries and issues.
• Execute CIP (Continuous Improvement Program) or manage projects that contribute to improved yield & cost efficiency
• Characterizing wet process and ensure SPC is well maintained and under control
• Start up and qualify new wet processes/material and new equipment within the scheduled timeline
• Work with RnD for new technology roadmap and report the evaluation results in a timely manner
• Update specifications/ documentation to meet TS16949 Quality Standard requirements (Work instruction, PFMEA, OCAP)
• Involvement in Smart Factory (Scope inspection, AI ADC for AOI, Hand Free automation)

Requirements:

• Degree in Engineering or Science
• At least 3 years of experience in the semiconductor manufacturing industry with wet process such as electrochemical plating, wet etching etc
• Statistical (SPC) and analytical skills (problem solving methodologies) are essential
• Application of quality and SPC tools at work - FMEA, DOE, SPC, etc

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

• Responsible (review and check) Process Engineer/s and Process Supervisors works.
• Define System Design Deliverables and review with leads to finalise that suit to the project.
• Scope of works to review with leads and get confirmed with client.
• Develop and / or review design documentation as per Deliverable List with leads e.g. Process Flow Diagrams Piping and Instrumentation Drawings, System Layouts, Equipment and Instrumentation data sheets.
• Review and participate in tendering activities (tender preparation, tender interview/clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor documentation to ensure compliance and completeness in technical scope.
• Brief Process Engineers/Supervisors on the project scope and ensure system complete on schedule.
• Participate in Risk and Process Hazard Analysis.
• Prepare budget and cost estimations.
• Mentor and provide guidance to Process Engineers in their work.
• Support implementation of Engineering Efficiency activities.
• Plan, organise and approve Inspecting and Test Plant, Inspection Qualification and Testing and Commissioning.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Promote safe work practises.
• Promote commercial awareness.
• Participation in providing inputs to Knowledge centre and utilization of temp plates, materials.
• BIM Modelling internal reviews with BIM/CAD Team , CSA & MEP counter parts and review with client for LOD 400, 450 and 500
• Ad-hoc duties as determined by Management.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• With 6 - 8 years of relevant experience
• Experience in design and/or construction in either Deionised/Ultrapure Water or Wastewater or Chemical or Gas Systems
• Experience in leading team in throughout project cycle start from concept design, detail design, construction, testing and commissioning, handing over.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description

• Review engineering drawing & specifications, design and execute engineering experiments, calculations and statistical control for new products & processes
• Delivering engineering activities to support and improve the company’s manufacturing & supply chain operations.
• Ensure manufacturing processes are capable of meeting and continue to meet quality, cost, delivery rate and lead time requirements to customers.
• Perform trouble shooting & analysis of production & process issues. Perform process redesign where required.
• Identify opportunities for new or improved processes to meet current or future requirements.
• Perform new equipment & materials validation using standards involving IQ, OQ & PQ methodology.
• Source new suppliers, qualify specifications & perform cost estimation to price out project expenses.

Experience

• General awareness of Manufacturing Systems e.g. CAD, CAM, CAPP, Manufacturing Execution System, ERP & Technical Publications.
• General experience with work flow Simulation software & Robotics applications e.g. Flexsim & UiPath.
• Experience with write-ups on work procedure workflow & instructions for production process.
• Experience with statistical process control & other quality/performance control tools.
• Ability to apply ISO13485, GDPMDS & other ISO standards to existing operations & into new businesses.
• LEAN/Six Sigma practitioner.
• Knowledge of ISO requirements.
• Knowledge on end-to-end processes from technical/material qualification, supplier audit, process qualification to manufacturing & supply chain logistics engineering.
• Resourceful, able to independently conduct research & apply new solution to business requirements.
• Proven Project management skills.
• Good presentation skills.
• Independent, self-motivated, process oriented & analytical.

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Requirements:

1. Proficiency in SolidWorks for creating in-process models, process sheets, and operation instructions.
2. Experience with SolidCAM software for generating NC programs for 3- and 4-axis machines.
3. Familiarity with Mazak and Fanuc controller systems. (NC Program)
4. Strong understanding of GD&T (Geometric Dimensioning and Tolerancing) in technical drawings.
5. Excellent communication skills in both English and Chinese.
6. Proficiency in Microsoft Excel, Word, and PowerPoint for preparing documentation.
7. Minimum of 3 years experience in precision engineering.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Maintains product and company reputation by complying with federal and state regulations.
• Contributes to team effort by accomplishing related results as needed.

REQUIREMENTS

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Environmental/Health/Safety) or any related field
• At least 3 Year(s) of working experience in the related field is required for this position.
• Possess keen knowledge of water and wastewater treatment technologies and the industry in general
• Able to work independently and a multitasker/ able to cope in a fast-paced environment.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Process Engineer/ Validation Engineer/ Equipment Engineer

• Working Hours: 8.15 - 5.45pm Mon -Fri
• Permanent Position / MNC
• Near Woodlands Interchange

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Prepare and execute process validation protocols (MVP/IOPQ) and reports for new and existing product, process and equipment with tooling, production, maintenance and quality personnel for all customers before mass production.
• Train on MVP/IOPQ to all concerned department/personal and prepare training records.
• Prepare instructions/procedures for the assembly processes, ECN/ECR/Deviation are drafted & executed.
• Execute engineering change notice (ECN)from customer/ in house and update ERP system promptly.
• Analyze defect reported in-house and customer with quality, tooling and production.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap, and perform internal quality system audit.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers
• To ensure all equipment on the mechanical assembly lines are in good functioning state.

Requirements

• Bachelor's degree in engineering with a focus on Process, Mechanical or Manufacturing Engineering
• 3-5 years of experience in a process engineering or validation role, preferably in a manufacturing environment
• Proficient in process validation methodologies and techniques
• Familiarity with quality management systems and regulatory requirements in the manufacturing industry

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Monday - Friday
8.15am - 6.30pm

Basic + AWS + VB

Responsibilities

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints. • Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues. Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives. • Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements

• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus. Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Process Engineer/ Validation Engineer/ Equipment Engineer

• Working Hours: 8.15 - 5.45pm Mon -Fri
• Permanent Position / MNC
• Near Woodlands Interchange

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Prepare and execute process validation protocols (MVP/IOPQ) and reports for new and existing product, process and equipment with tooling, production, maintenance and quality personnel for all customers before mass production.
• Train on MVP/IOPQ to all concerned department/personal and prepare training records.
• Prepare instructions/procedures for the assembly processes, ECN/ECR/Deviation are drafted & executed.
• Execute engineering change notice (ECN)from customer/ in house and update ERP system promptly.
• Analyze defect reported in-house and customer with quality, tooling and production.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap, and perform internal quality system audit.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers
• To ensure all equipment on the mechanical assembly lines are in good functioning state.

Requirements

• Bachelor's degree in engineering with a focus on Process, Mechanical or Manufacturing Engineering
• 3-5 years of experience in a process engineering or validation role, preferably in a manufacturing environment
• Proficient in process validation methodologies and techniques
• Familiarity with quality management systems and regulatory requirements in the manufacturing industry

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

DUTIES

· Plan and manage manufacturing processes from raw material receipt to finished

· part shipment.

· Create or revise work instructions and develop new processes according to

· Engineering drawings and standards.

· Design Jig & Fixture to support CNC section.

· Develop Advanced Product Quality Planning, carry out associate training and a

pre-production trial project.

· Assist Production in fulfilling technical and quality requirements.

· Manage technical changes to fulfill customer requirement.

· Providing assistance with the RFQ proposal process and development.

· Any other ad hoc duties as assigned.

REQUIREMENT

· Diploma/Degree in Mechanical / Precision Engineering or other relevant discipline.

· Minimum 3 years of experience as a process engineer in the Manufacturing

industry or equivalent.

· Experience with Master-CAM Programming are preferred.

· Experience of hands-on CNC Milling/Turning fabrication.

· Good problem-solving skills.

· Proficient in Microsoft Excel functions.

· Systematic and meticulous in approach.

· Good communication skills & acts as a team player in a small dynamic team.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills