Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients, consultants, and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), and Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications.
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for the placement of students and younger engineers

APPLY NOW!!!

• Degree in Mechanical Engineering recognized by PEB Singapore
• Min. 2 years of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage.
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67061 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

INTRODUCTION
This is a Research & Development (R&D) Application Engineer/ Chemist position within the Electronic and Industrial Finishing (EIF) Group. This role is located in our Innovation Lab, Kallang Singapore.

Your role will be highly involve in development and improvement of metallization products for telecom, data center, consumer, and other electronics end markets. You will work in partnership with our global team of scientists and engineers to develop and commercialize industry-leading metallization products that deliver enhanced performance for the diverse electronics markets we serve. You will focus on the development and improvement of chemistries and processes within the metallization research platform.

YOUR KEY RESPONSIBILITIES:

• Evaluate and refine new metallization products via routine testing and analysis
• Compliance with environmental health and safety best practices
• Produce and provide samples of existing and early-stage products to customers for evaluation, feedback, and iteration
• Provide on-site technical assistance to customers during early installations of new products
• Conduct experiments and evaluations independently and as part of a team while exhibiting a strong commitment to safety at all levels
• Participate in team approach to product development by sharing knowledge, ideas, and creativity
• Evaluate and communicate customer’s critical requirements for successful product implementation
• Collaborate with R&D and other functions to successfully meet commercialization requirements

EDUCATION, EXPERIENCE & QUALIFICATIONS:

• Experience with applied electrochemistry and electroplating techniques, inorganic chemistry, corrosion science, surface science and/or metallization techniques is required
• A Bachelor’s or Master’s degree in Chemistry or a relevant applied science is required
• Experience with a wide range of analytical techniques including SEM/EDS, XRF, XRD, wet chemical techniques, or surface analysis methods
• Background in formulating new products, track record of innovation, and excellent practical laboratory skills is preferred
• Good problem-solving skills and ability to quickly become competent in an unfamiliar area of work
• Effective verbal and written communication on all aspects of program activity, including demonstrated ability to make clear, persuasive, concise, and well-organized oral presentations
• Excellent time management skills and strong bias for action
• Must be able to work well in teams and to work independently with limited supervision
• Strong commitment to core safety values and best practices for safety including review of risk assessments, job safety analyses, standard operating procedures and MSDS
• Position may require some travel to international locations and customer facilities
• Travel Expectations: may require up to 20% travel to customer facilities and international locations.

As a Product Yield Analysis (PYA) ESDA Engineer at Micron Technology, Inc., your primarily responsibilities will be setup ESDA for new products, maintain and enhance ESDA systems, drive alignment across fabs on how ESDA data is collected, stored, analyzed and reported. Additionally, you will be responsible for communicating and coordinating ESDA activities with various Departments (Design, Product Engineering, Test, YE, RDA and IT).

ESDA (Enhanced Software for Defect Analysis) is the system used at Micron Technology, Inc., to categorize fails coming from the tester based on their pattern, size and location within the die. ESDA is used to identify defects detected during wafer fabrication responsible for tester fails as well.

Key Responsibilities:

ESDA setup for new products

• Ensure ESDA is available for all DRAM and NAND parts before first Silicon reaches Probe.
• Verify that setup is correct and ESDA data is available to YE groups.
• Enable ESDA on new technology and new test data.

Maintain ESDA System

• Monitor Micron’s current ESDA system for problems in its ability to collect complete and accurate data in a timely fashion.
• Be a central point of contact for customer problems with ESDA.
• Identify root cause of ESDA problems quickly and solve or contact and work with responsible department to solve.
• Forecast future needs for ESDA system and be pro-active in addressing.

Improving ESDA System

• Identify opportunities to leverage ESDA data for yield improvement and reliability improvement.
• Improve ability to use ESDA for defect matching for feedback to RDA and YE.
• Create Engineering software tools for ESDA analysis and product line monitoring.
• Work with FA groups on tactical issues involving ESDA analysis to understand current usage.

Alignment

• Drive for alignment across fabs on how ESDA data is collected, stored, analyzed and reported.
• Help in establishing common company-wide criteria for measuring performance of ESDA system.
• Work with other departments/sites on prioritizing ESDA related projects (with timelines and deliverables).
• Facilitate meetings across departments to get input and consensus on improvements/fixes to ESDA.

Requirements:

• Degree in Electrical and Electronics Engineering / Computer Engineering or equivalent.
• Experience with memory products in one or more of the these areas: Product Engineering / Product Test / Product Design / Product Yield Enhancement
• Proficiency in at least one programming language, preference for C, C++, Python.
• Familiar with OOP concepts and implementation.
• Familiarity with web development beneficial (html, javascript, css, Angular)
• Familiar with Unix Shell environments
• Familiar with source control (Git, Jira, Jenkins).
• Excellent problem-solving and analytical skills.
• Ability to work in a fast-paced environment and communicate effectively (written and verbal) across multiple locations and teams.
• Strong skills in communicating complex technical ideas/concepts.

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Project Engineer (IT)
• Working Location: East (Nearest MRT: Tai Seng)
• Working Hours: 5 days (Monday-Friday, 9 am to 6 pm)
• Salary Package: Up to SGD 3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up equipment for various systems and conduct testing and commissioning.
• Install electronic systems, including cabling and storage devices.
• Perform troubleshooting, repairs, and preventative maintenance on electronic systems.
• Manage projects and follow up with clients.
• Provide onsite support to diagnose and resolve technical issues.

APPLY NOW!!!

• Min. Diploma in IT or Engineering field
• Min. 1 year of working experience in Project Management or related field
• Familiar with Windows, Word, PowerPoint, Excel, and Access

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66287 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

5days ,permanent, Aljunied

Product

Heating , ventilation, air conditioning (Hvac)solution for data center

Our client

MNC in air conditioning and humidification system solution serving high tech industry

Years in business : > 70 years worldwide

Area of business: Global

Job scope

· To design and draw HVAC solutions, to perform heat load calculations for clients.

· To visit site and attend to meetings with clients

· Submission of project specifications and certifications for client's approval.

· Sourcing of competitively priced equipment for the project

· To see through successful completion of project from inception to commissioning.

Requirements

· Min Diploma in Electrical/Mechanical/Electronic

· 2Years experience in HVAC design, installation ,commissioning works.

· 2 years experience in data center hvac project management

· Proficient in Auto-cad interpretation of job site drawings.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Mechanical Engineer (Assembly)
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assemble, debug, and test-run customized modular machines.
• Handle the commissioning of these machines.
• Provide technical support at customer locations to ensure proper equipment operation.
• Implement design improvements to simplify designs, reduce parts, and use cost-effective alternatives, while maintaining or enhancing product performance.
• Procure or assist in procuring necessary items to perform the above duties effectively.
• Write and maintain all required documentation, including work and assembly instructions, as well as manufacturing and test procedures.

APPLY NOW!!!

• Nitec, Higher Nitec, or Diploma in Mechanical Engineering with 2 to 3 years of relevant industry experience.
• Knowledge of industrial automation, jigs, fixture design, FMEA, SPC, and CAD as well as experience in machine design are added advantages.
• Ability to work independently with minimal supervision.
• Willingness to travel as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67302 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Data Framework Engineer

Expected Years of Experience: 8-10 years

SCOPE OF THE ROLE

You will be responsible for the end-to-end software development and support for all work related to projects, quarterly change requests, L3 production fixes. This includes software product implementation and administration, application design, development, implementation, testing and support.

You will also be responsible for quality assurance of the team’s delivery in conformance with the Bank-defined software delivery methodology and tools. You will partner with other technology functions to help deliver required technology solutions.

Other responsibilities include:

- Create frameworks, technical features which helps in faster operationalisation of Data models, Analytical models (including AI/ML) and user generated contents (dashboards, reports etc)

- Effectively partner with data scientists in enabling faster adoption of AL/ML model based systems

- Independently install, customise and integrate software packages and programs

- Carry out POCs involving new data technologies

- Design and develop application frameworks for data integration

- Create technical documents such as solution design, program specifications for target solutions

- Perform design and development of applications which may not be limited to: Software Applications, Data Integration, User Interfaces, Automation

- Maintain and recommend software improvements to ensure a platform centric management of software applications

- Performance tuning

- Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

- Perform tasks as part of a cross functional development team using agile or other methodologies and utilising project management software

Technical skillsets

TEAM Architecture (Big Data)

- 8+ years of experience with application development in Big Data Ecosystem (such as Cloudera, ElasticSearch, Spark, Presto, Hive, Impala, Kibana, Logstash, Hbase, Kafka),

- Expertise in building applications using Java, Scala, Python, Shell scripting

- Experience in large scale implementations and performance optimizations in the Big Data Ecosystem using Spark, Hive, Impala, Apache Kudu, Ozone, Presto, Tez, Iceberg etc

- Knowledge of frameworks such as Spring, Struts, Hibernate etc

- Knowledge of Object Oriented Programming, Multi-threading, Containerization, etc

- Knowledge of related technologies such as HTML, Javascript, CSS, React, Jquery, node.js, docker

- Knowledge of Elastic, Kibana, Logstash, Hive, Sqoop, MongoDB, Oozie, Flume, Kafka

- Expertise in integrating applications with Devops tools

- Knowledge of building applications on MPP appliances such as Teradata, Greenplum, Netezza is a plus

At least, 2 to 3 technical certifications in any of the below technologies:

1. Language – SQL, Java, Python, Scala, Javascript, node.js
2. Automation / scripting – CtrlM, Shell Scripting, Groovy
3. Cloudera Hadoop distribution – Hive, Impala, Spark, Kudo, Kafka, Flume

Additional Experience required for all teams to create an added advantage:

1. CI/CD software, Testing Tools - Jenkins, SonarQube
2. Version Control Tool - Aldon+LMe, CA Endeavor
3. Deployment Tool kit -Jenkins
4. Service or Incident Management (IcM) Tools - Remedy
5. Source Code Repository Tool - Bitbucket
6. Scheduling Tool - Control-M
7. Defect Management Tool - JIRA
8. Application Testing tool – QuerySurge
9. Cloud certification
10. Platforms provided by FICO, Experian, SAS for credit and portfolio management

EDUCATION

- Bachelor’s degree/University degree in Computer Science, Engineering, or equivalent experience

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Regional Technical Engineer (APAC) / IT Support Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 9 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to the sales team and customers for Proof of Concept (PoC), project deployment, post-sales support, and internal simulation testing.
• Study system and product technical details to offer technical advice or support to customers and the sales team.
• Evaluate product specifications to improve system performance.
• Communicate with HQ programmers about customized software functionality requirements or 3rd party software integration (API) details.
• Build and maintain strong relationships with customers.
• Offer troubleshooting assistance to customers from the office or on-site.
• Manage demo products and maintain the filing of technical information.
• Set up and manage demo equipment for tradeshows.
• Monitor customer satisfaction to ensure outstanding customer value.
• Develop and maintain technical competence in company products, applications, and services.
• Create technical information such as datasheets, manuals, and training materials.
• Conduct technical presentations or training for customers.
• Assist in overall company operations for self-development toward a managerial position.
• Provide timely updates through the Vaxtor Project/PoC Management tool.
• Any ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma in IT, Computer Engineering or Electronics, or equivalent
• Minimum 2-3 years of relevant experience in the electronics industry
• Knowledge of ANPR software and Intelligent Traffic System will have an advantage
• Experience with OCR, Computer Vision, Machine Learning and AI technologies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Planning, co-ordination and execution of LTA and SMRT projects

§ To attend all interface and co-ordination meetings with different stakeholders and contractors

§ Installation, monitoring, supervision, testing and troubleshooting of RTU at site

§ Preparation of project documents and drawings

Requirements:

§ Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

§ Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Requirements :

• Bachelor Degree in Civil Engineering recognised by PE Board ( Singapore )
• Minimum 1 to 2 years of design experience in a local consultant firm
• Graduate engineer with a positive attitude may also apply
• Candidates with ( partial ) overseas experience may be considered
• Conversant with current design codes and design process in Singapore
• Independent and organised, with positive work attitude
• Willing to put in extra effort / time when need arises
• Strong communication skills and effective team player
• Proficiency with ACAD will be an added advantage
• Able to execute submission to relevant agencies / authorities in Singapore
• Able to co-ordinate projects with other team members
• Willing to learn architectural permitting / compliances to Singapore authorities

`

Job Description :

• Support Senior Engineers in the detail design and design coordination of Civil, Structural and Geotechnical projects.
• Responsible for the execution of structural design and drafting works
• Preparation of calculations and review of structural design drawings
• Customer specifications, applicable codes, standards and other generally accepted
• practices.

Responsibilities :

• Design of temporary and permanent works
• Carrying out analysis design of buildings and infrastructure
• Co-ordination of projects including submission to local authorities and liaison during the construction stage
• Liaise with clients, consultant, and authorities on technical matters

Responsibilities:

• Design and programming of PLCs.
• Knowledge in troubleshooting
• Testing and commissioning of food and beverage equipment and machinery, as well as chemical industrials.

Requirements:

• Must have Degree or diploma on Electrical engineering.
• A minimum of three years' experience in design, troubleshooting, and instrumentation is required.
• A solid understanding of PLC programming is required.
• Open for 5.5 Working Days
• This position will be for 1 year contract with possibility of converting to permanent staff.

For interested applicants, kindly send your resume in Word/PDF format including the following:

1.Current Salary

2. Expected Salary

3. Availability

4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Design and project management.
• Coordination and liaison with customer representatives and contractors for equipment service.
• To create design drawings for a project/equipment.
• Supervision of project work installation.
• Assist with the filing of job bids and the creation of technical detail drawings.
• To collaborate with an electrical engineer and manage projects from the proposal stage to completion (including project scheduling, budgeting, and so on).

Requirements:

• Experience in Design & project execution
• Relevant experience in packaging and process engineering industry is preferred
• Have a Diploma on Mechanical Engineering
• Design engineering work that includes piping and tank design calculations, equipment selection, and so forth.
• Assist the site engineer with the installation.
• Comfortable to commute to the west.
• Open for 5.5 Working Days
• This is for 1 year contract role with possibility to convert to permanent staff.

For interested applicants, kindly send your resume in Word/PDF format including the following:

1.Current Salary

2. Expected Salary

3. Availability

4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

General Overview

This position is part of the Instrument, Control and Electrical (ICE) team that provides maintenance and technical support to the Operations and Project teams in the LNG Terminal. This position is responsible for ensuring the overall technical integrity of the Terminal from the electrical discipline perspective.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Lead and supervise maintenance tasks and reliability improvements of electrical equipment and systems within the Gas Engine Generator (GEG) area
• Implement reliability programs and develop maintenance procedures for electrical equipment to facilitate consistent execution of maintenance tasks
• Develop and carry out minor CAPEX electrical projects following company guidelines
• Investigate electrical equipment failures or malfunctions in order to identify root causes of problem as well as recommend and implement solutions
• Liaise with external stakeholder including government agencies on electrical matters
• Support Major expansion projects from the electrical and operations perspective
• Work closely with Licensed Electrical Worker to provide integrity assurance for the electrical systems.
• The incumbent shall also participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of five (5) years practical experience in an electrical maintenance / design role in an oil and petrochemical facilities or power generation environment.
• Relevant technical experience in high voltage electrical power systems.

In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Strong interpersonal, written and verbal communication skills

Education

• Bachelor Degree in Electrical and Electronic Engineering from a recognized university.

Working Location: Marsiling, Singapore

Working Hours: Office Hours

Contract Duration: 12 months (renewable / convertible)

Job Responsibilities:

• Lead and Manage Teams: Head the process engineering team responsible for production, tooling, NPI, and validation.
• Oversee Injection Molding Processes: Manage injection molding for the medical, automotive, and technology sectors.
• Improve Production: Drive production and process improvements related to molding processes.
• Conduct Validations: Lead process validation activities and generate validation protocols and reports (IQ, OQ, PQ).
• Document Procedures: Provide and maintain documentation for new/transfer molds and process instructions.
• Coordinate and Solve Issues: Work with cross-functional teams to address process-related issues and implement solutions for process or material problems.
• Drive Continuous Improvement: Maintain process effectiveness through continuous improvement projects and compliance with regulations (cGMP, FDA, ISO).
• Support and Develop Teams: Foster a high-performing team aligned with business goals and customer demands.

Job Requirements:

• Education: Bachelor’s degree or Diploma in Plastic Processing, Chemical, or Mechanical Engineering.
• Certification: Master Moulder Certificate 1 or 2.
• Experience: Minimum of 10 years in industrial plastic engineering and processing techniques.
• Skills:
• Expertise in scientific molding techniques.
• Proficient in handling various plastic polymers.
• Familiar with medical device validations.
• Knowledgeable in risk assessment and failure mode analysis.
• Skilled in process validation, continuous improvement, and Design of Experiments (DOE).

JAC Recruitment Pte. Ltd.

EA License Number: 90C3026

Registration Number: R22107842

EA Personnel Name: Ng Siew Thien

- Outsourced 1 year contract

- Up to $6k + Standby allowance $200

- Ang Mo Kio

- Mon to Fri : 8:30 am to 6 pm

Job Descriptions :

The L2 System Engineer (Linux) is responsible for:

• Assisting the Support Engineer or Software Engineer in problem resolution beyond the capability of the 1st Level Support Staff.
• Performing system recovery if needed.
• Escalating unsolvable problems to the 3rd Level Support Staff and reports the escalation to superior.
• Ensuring that the System runs according to contractual specifications after problem resolution.
• Providing advice on system / database performance monitoring and tuning.
• Ensuring deployments of approved patches/releases are implemented accordingly to Change Request.
• Complete all Service Requested accordingly to SLA timeframe.
• Assisting the Customer in the verification, isolation and/or provision of a temporary work-around for the problem logged beyond 2nd Level Support Staff capability.
• Escalating unsolvable system problems and service request to the OEM/Vendor for technical support.
• Coordinating system development tasks to include design, integration and formal testing on the Change Request.
• Overseeing all transitions into production on the Change Request.
• Developing and complete actions in system specifications, technical and logistical requirements and other disciplines on the Change Request.
• Creating and maintain programmatic and technical documentation to insure efficient planning and execution on the Change Request.
• Managing and document system configurations on the Change Request.
• Perform troubleshooting and resolve incident based on SLA.
• Generating the relevant administrative records and reports.
  
  

Period:

• 1 year contract (outsourced contract)

Working Hours:

• Mon to Fri : 8:30 am to 6 pm

Salary:

• Up to $6,000 + Standby allowance $200

Working Location:

• Ang Mo Kio

Job Requirements:

• Degree/Diploma in Computer Science, Computer Engineering or equivalent, although consideration will be given to experience and certifications in lieu of degree.
• Minimum 3 to 5 years IT experience
  

Special Knowledge or Skills:

• Past working experience in Cloud environment is an advantage
• Able to handle demanding service response and recovery turnaround
• Able to manage daily support tasks to meet stringent SLA requirements
• Excellent scheduling and multitasking skills
• Meticulous and process-oriented
• Good, hard-working attitude with ability to work well under pressure
• Good communication skills English (written, spoken)
• Good analytical skills with ability to work with others to resolve problems.
• Good organization skills, with ability to properly document and track information.
• Preferably with Microsoft Certification and/or ITIL certification.
• Dynamic, customer oriented, experience working in a fast paced environment.
• Good Knowledge of following products will be advantageous:
• -Linux,Unix, Ansible, Satelite, GPO Compliance

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

Electrical and Control Design Engineer | Up to $5.8k | 5 Days | Woodlands

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

JOB RESPONSBILITIES:

• Provide technical support for manufacturing operations
• Conduct process validation
• Perform maintenance, troubleshooting and calibration on Machines / Equipment
• Liaise with supplier on all technical purchases
• Co-ordinate with supervisor / leader on production schedule / audit / stock take etc.
• Any other tasks assigned by superior by time to time.

JOB REQUIREMENTS:

• Diploma in Electrical / Mechanical Engineering or related discipline (Must if they do not have relevant work experience)
• Rotating Shiftwork (Day & Night) - Monthly Rotation
• Work in cleanroom environment - Required to wear cleanroom uniform

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Descriptions

Maintaining and administering the networks environments including hardware, and configurations.
Performing disaster recovery operations and data backups when required.
Protecting data, software, and hardware by coordinating, planning and implementing network security measures.
Troubleshooting, diagnosing and resolving hardware, software, and network problems.
Replacing faulty network hardware components when required.
Monitoring network performance to determine if adjustments need to be made.
Coordinating computer network access and use.
Administer, and troubleshoot network infrastructure devices, including wireless access points, firewall, routers, switches, controllers.
Responding to inquiries from users, IT peers, vendors and to provide technical assistance and support.
Ensure control and compliance for the systems and servers related are available to only authorize users which follows policies and SOPs closely.
Attending audit meetings and ensure proper documentation of all work done.
Vendor management
Establish/maintains customer relationship with partners or internal users to ensure complete understanding of business processes to enable the delivery of viable Infrastructure solution.
Provide PABX support based on Client’s SOP and documentation
Attending to machine faults related to network problems during office and after office hours.
Job Requirements:

3-4 years of network
Network security
HPE network
Wifi knowledge (Aruba or Cisco)
Fortigate, Palo, or Cisco firewall experience
Megapop and SD-WAN knowledge
Work with vendors
Networking best practices
PABX knowledge (will be good)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd
• RCB No. 200007268E • EA License No. 01C4394
• Reg. <R21100074> <Cheryl Thng Wei Lin>

Responsibilities:

• Respond to production issues and emergencies, such as process outages, alarms, or equipment failures.
• Diagnose and take corrective actions, or work alongside the Manufacturing supervisor to restore operations and prevent safety or quality incidents.
• Collaborate with the production team to maintain process stability and operational efficiency.
• Identify and implement opportunities for operational improvements.
• Assist and guide Standard Users with system-related questions and issues.
• Support manufacturing operations outside regular hours, including attending to urgent requests to ensure timely issue resolution.
• Work on holidays and overtime as needed, with flexibility to adjust work schedule to meet production demands.
• Participate in projects involving manual intervention. Identify, implement, and test system changes.
• Follow all Environmental, Health, and Safety (EHS) requirements.
• Maintain fair and respectful relationships and adhere to company’s Code of Conduct.
• Perform other duties as assigned by the supervisor.

Requirements:

• Degree in Chemical Engineering, Bioengineering, Chemical & Biomolecular Engineering, Pharmaceutical Engineering, or related field,
• Min 2-4 years of experience in biotechnology or pharmaceuticals industries
• Self-motivated team player with a hands-on attitude and strong communication skills.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

• Gantry Associate Engineer (2 years contract renewable)
• 4 days, 12 hrs rotating shift from 7-7; first few months permanent night shift from 8.30pm-6am
• Currently the 4 days shift is spread from Monday to Saturday, 2 days off. Sunday is rotating standby.
• Salary: $2700 -$3000
• Location: Bedok office

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job scope:

• To perform comprehensive maintenance for system
• To perform site supervision and hands on when required..
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work related tasks.
• To execute job related tasks assigned by Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics
• Willing to work at height (6 meters) on outdoor public road on gantries.
• Experience in electrical and electronic works.
• Class 3 driving license is required
• Experience in basic Microsoft office.
• Understand basic Window system.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Able to work in 12 hours rotating shift, first few months will be permanent night shifts

Working Location: Jurong
Working Days : 5 Days ( Mon- Fri)
Working Hours: 8am-5pm

Salary: $2600 - $2700

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745