ABOUT SEMBCORP INDUSTRIES:

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com

KEY ROLES AND RESPONSIBILITIES:

• Perform front end engineering design (FEED) and basic design for Process Design, Review and Engineering for centralized utility facilities, utility power and water, petrochemical industries and utility scale renewable projects.
• Develop P&ID, mass and heat balance, process flow diagram, operating/ control philosophy, overall supply scheme, layout, equipment specification, yield analysis etc.
• Develop and continually improve internal engineering best practices and procedures to provide engineering services of high quality in support of the various projects.
• Lead in process design and review inter-disciplines design/ engineering with consideration for safety, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost.
• Conduct engineering activities during business or project development including but not limited to pre-feasibility/ feasibility studies, technical due diligence, cost estimation, site survey, technical proposal to customer, project / EPC scoping strategy, vendor selection and review, determine LCOE, budgetary quotation review and clarifications, and all related technical support and solutions etc.
• Evaluation of new technology and innovation solutions.
• Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR etc.
• Participate in HAZOP, QRA, EIA studies.
• Review and approval of detailed design submitted by Contractors and ensure compliance with Standards and all the company best practices.
• Familiar with multiple energy resource simulation and optimization tools.
• Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline’s schedule of rates and cost estimate template, engineering checklists etc.
• Ensure all activities carried out are in full compliance to all regulatory and authority requirement.
• Ensure engineering support is provided in a timely manner to all stakeholders through resource planning, close collaboration with discipline engineers and team members, contractor management, etc.
• Where applicable, provide training and guidance other team members.

KEY DECISIONS & DIMENSIONS:

• All activities in full compliance to all legal / authority requirements.
• All projects (development and execution) are to be designed, executed and performed to a high quality at competitive costs, safely, within schedule, within budget and meet Sembcorp and industry quality requirement.
• All value engineering and strategic plans developed shall ensure Capex remain competitive, are sustainable and meet the company’s business and operational needs.
• All developed and accumulated knowledge / value must be systematically retained within company

QUALIFICATIONS & EXPERIENCE:

• Degree in optimization, process design and engineering discipline or equivalent
• At least 10-15 years of experience in energy business related engineering management and project management (engineering and construction).
• Experience in power and water utilities as well as renewable energy projects is preferred.
• Good command of multiple energy resource simulation and optimization tools is preferred.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Demonstrate critical thinking skill, positive attitude, teamwork, analytical, communication skill, leadership skill.
• Strong self-motivation and work ethic, flexible and thrives under pressure.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

• Oversee daily operations of the heat treatment unit to ensure safety, quality, and production targets are met.
• Lead and support transition activities for facility and main operation to ensure cleaning activities meets company standards before maintenance handover
• Coordinate with the maintenance team to address operational issues.
• Assist the shift team with tasks such as blending, chemical handling, and cleaning.
• Report to supervisors to ensure safe and compliant daily operations
• Any other ad-hoc duties as assigned

Requirements:

• Min NITEC in Chemical Process Technology
• Min 2 years working experience Chemical industry
• Working Hours: Mon-Fri (8am- 4:30pm)
• Location: Jurong Island (Transport provided from Jurong East MRT)
• Salary: Up to $2500 + $200 Site Allowance
• Able to start work immediately or on short notice

Interested applicants kindly state your expected salary, last drawn salary and starting date.

We regret to inform that only shortlisted candidates will be notified.

Log on to www.e-cruitteam.com.sg for more job opportunities!

EA Personnel: Lim Xue Ting

EA Reg ID: R25126683

EA Licence No.:19C9603

Job Summary:

This role manages the Product Application Lab for Finishing for Electronics (FFE) applications, focusing on Connector, Lead Frame, and Printed Circuit Board products. Working closely with the Sales team and global technical resources, the role will initially focus on Electroless Nickel and Mold Compound de-flash products, with potential expansion into electroplating products and surface treatments. The candidate will support product development, customer trials, and technical guidance across various applications in the SEA region.

About the Company:

Our client is a global supplier and market leader of specialty chemicals, custom finishing equipment, engineered powders, and analytical control systems, serving industries such as electronic components, printed circuit boards, semiconductors, industrial finishing, and decorative sectors.

Responsibilities:

• Develop a deep understanding of company's products, focusing on Electroless Nickel, Mold Compound de-flash products, and other surface treatments for the electronics industry.
• Stay updated on industry developments and competitor products to ensure company's market competitiveness.
• Collaborate with Sales and Technical teams to prioritize customer and application targets.
• Recommend the best products based on product experience and lab trials, optimizing performance to meet customer specifications.
• Conduct lab trials, product testing, and performance measurements, either on-site or remotely with other regions.
• Assist in developing specifications and facility recommendations for local manufacturing of company's products, either at company's site or third-party facilities.
• Hire and supervise technician/s to maintain the lab and assist with customer trials.
• Support local manufacturing of company's products, develop specifications, and ensure quality targets and operating procedures.
• Foster external collaborations to strengthen Technic's offerings and market visibility.

Requirements:

• Master's or PhD in Chemistry or Chemical Engineering.
• At least 10 years of experience in metal finishes for the Electronics Industry.
• Strong communication skills and ability to collaborate across functions and regions.
• The role requires flexibility and the ability to drive results in a fast-evolving industry.

How to Apply

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Operations Executive to join their Warehouse Operations team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Optimize warehouse and administrative processes for efficiency.
• Identify and address improvement opportunities with staff and leaders.
• Drive projects to reduce waste, enhance productivity, and ensure sustainability.
• Implement digital tools to streamline workflows and improve the work environment.
• Present proposals to customers and coordinate implementation with stakeholders.
• Achieve annual targets for cost savings, sustainability, and customer improvement goals.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of warehouse operations, with exposure in process improvement projects
• Experience in automation tools such as powerbi, Python or power automate

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Operations Executive to join their Warehouse Operations team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Optimize warehouse and administrative processes for efficiency.
• Identify and address improvement opportunities with staff and leaders.
• Drive projects to reduce waste, enhance productivity, and ensure sustainability.
• Implement digital tools to streamline workflows and improve the work environment.
• Present proposals to customers and coordinate implementation with stakeholders.
• Achieve annual targets for cost savings, sustainability, and customer improvement goals.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of warehouse operations, with exposure in process improvement projects
• Experience in automation tools such as powerbi, Python or power automate

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

• 3 - 5 years working experience
• Experienced in government projects on GCC is an added Advantage
• Completed at least 1 SDLC
• Experience with application wireframe UIUX tools
• Scrum Master or Product Owner Certified (Optional)
• AWS or Azure fundamentals certified (Optional)
• PMI-PBA Certified preferred (Optional)
• Good Command of English
• Diploma Holders are welcomed

Objectives of the position:

• The NPI / Production Process Engineer is required to collaborate with the Program Management Team

• and be involved in New Product Introduction activities and the creation of manufacturing Work

• Instructions as well as other process documents. The incumbent is also expected to improve the work

• processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

• Early involvement in NPI (New Product Introduction) activities.

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing

• process elements.

• Create Bill of Materials structure.

• Create manufacturing Work Instructions and other process documents in collaboration with the

• Program Management, Production and Quality Assurance Teams.

• Carry out time studies and update the process cycle times.

• Provide timely technical support to the Production Team pertaining to manufacturing process and

• quality issues.

• Engage in DFM and Lean Line Design activities.

• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

• Actively and continuously improve the work processes to improve work efficiency and quality.

• Work with Program Management, Production, and Quality Assurance Teams to identify potential

• process risks and make recommendations to mitigate these risks.

• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

• Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

• Manufacturing/Production or industrial Engineering

• Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

• harness. Candidates with less experience may be considered for the Asst. Engineer position

• Ability to read and interpret technical documents and drawings

• Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

• Experienced in the creation Bill of Materials structures

• Good knowledge on Solid Edge or SolidWorks preferred.

• Proficient with Microsoft Outlook, Excel, Word and PowerPoint

• Lean/Six Sigma certification is desirable

• Strong analytical ability

• Team player with good communication skills

Mon to Fri 8.30am - 5.30pm

We are looking to hire a Senior Process Engineer to work on projects in the Pharmaceutical and Biopharmaceutical sectors.

Key responsibilities:

• Design of process and utilities – preparation of PFDs, P&IDs, equipment sizing calculations
• Coordination of design with other design disciplines and equipment suppliers
• Ownership of equipment modules and packages through design and procurement phases
• Completion of Design Risk Assessments
• Participation in Technical and Safety reviews
• Interfacing with client design team/end users
• Process optimization/site support

Requirements

• Degree in Chemical/Process Engineering (or equivalent)
• At least 8 years of design and project experience in the Pharmaceutical and Biopharmaceutical sectors.

What you can expect

• The opportunity to work on a range of projects, from conceptual stage through to detailed design, commissioning and qualification.
• Career enhancement due to the wide scope of the projects and experience you will receive.
• Work closely with Industry leaders

Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

• Exciting opportunity for someone who thrives in a fast-paced environment
• Join a team dedicated to creating positive environmental and social impact.

About Our Client

This is a well-established company within the energy & natural resources sector, with a strong presence in over 170 countries worldwide. Renowned for its innovative approach, the company consistently stays ahead of industry trends and prioritises sustainability in its operations.

Job Description

• Work closely with current and new customers to understand business needs and recommend continuous improvement and innovation plans that will maintain and grow double-digit sales within the assigned territory.
• Develop strong relationships with key stakeholders in current and new customers, including plant or facility executives.
• Generate and execute sales plans in the assigned customer base and new customer accounts to meet defined territory profit increase goals.
• Provide technical support to customers, identifying and resolving complaints, and escalating as required.
• Engage in problem-solving by performing system analysis, interpreting data, and providing written recommendations to ensure customer operations are performing at optimal levels.
• Provide treatment solutions for the customer's total water management system to achieve water and energy-saving goals, cost optimization, and improve system reliability.
• Identify and execute projects to help customers achieve operational savings, ensure product quality, and reduce manpower engagement.

The Successful Applicant

• Bachelor Degree in Chemical Engineering with over 5 yeas of relevant technical Sales and Service experience
• Effective critical thinking and problem solving skills with ability to work in a refinery/chemical plant
• Customer oriented and always ready to engage with customers

What's on Offer

If you're a dedicated and technical individual with a passion for the energy and natural resources industry, we encourage you to apply for the Process Sales & Service Engineer position.

Contact

Tiffany Wong (Lic No:R22110815 / EA no: 18S9099)

Quote job ref

JN-012025-6634271

Phone number

+65 6416 9801

Michael Page International Pte Ltd | Registration No. 199804751N

Your Job

Senior Business Process Analyst

Our Team

We are part of the Global Invoice to Pay Team at Koch Global Solutions. We constantly think of new ways to maximize system and process efficiencies for team and create value for the organization. We stay on top of new technology innovations.

What You Will Do

• Financial Controlling and Reporting activities for monthly and yearly closing.
• Review financial statements and prepare insightful P&L commentary for submission.
• Prepare Balance Sheet Reconciliation in Blackline.
• Understand tax requirement for Singapore and Australia and prepare Singapore GST and Australia BAS return.
• Approve the payments in banking portal.
• Process payment runs and execute payment instructions in banking portal
• Process AR Receipts in ERP system, follow up on Debtors aging, perform intercompany confirmation at month end.
• Initiate process improvement ideas via automation tools.
• Participate in any testing of new project.
• Perform ad-hoc duties as assigned.

Who You Are (Basic Qualifications)

• Accounting experience handling month end close and willing to do hand on accounting transaction work.
• IT savvy and well-versed in Microsoft office applications
• Strong team player with good interpersonal, communication and organisational skill
• Ability to prioritise, meet deadlines and work autonomously.
• Service oriented, able to provide a very high level of service to internal customers.
• Meticulous and attentive with details

What Will Put You Ahead

• Exposure to automation tools such as Power Automate, Power BI, Power Query, Alteryx will be advantageous.
• Curious mind and be open to experiment and self-learning.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Koch Business Solutions (KBS) provides consulting and transactional services for Koch companies in the areas of human resources, information technology, finance, accounting as well as project, facilities and property management. Our think tank of problem-solvers and idea-makers transform work life for 122,000 employees around the globe.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Operations Executive to join their Warehouse Operations team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Optimize warehouse and administrative processes for efficiency.
• Identify and address improvement opportunities with staff and leaders.
• Drive projects to reduce waste, enhance productivity, and ensure sustainability.
• Implement digital tools to streamline workflows and improve the work environment.
• Present proposals to customers and coordinate implementation with stakeholders.
• Achieve annual targets for cost savings, sustainability, and customer improvement goals.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of warehouse operations, with exposure in process improvement projects
• Experience in automation tools such as powerbi, Python or power automate

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies and industry-leading innovators.

Job Description

We are looking for a dedicated Industrial Process Engineer to join our QA team. You will work closely with the operations and engineering teams to document and review operational processes and identify improvements to existing manufacturing and engineering process flows.

Primary responsibilities

1. • Process Development: Design, develop, and optimize manufacturing processes for electronic products to improve efficiency, quality, and cost-effectiveness.
2. • Continuous Improvement: Identify and lead continuous improvement initiatives using Lean, Six Sigma, and other methodologies to enhance production processes.
3. • Equipment Management (Assembly Jig and tool): Oversee the installation, maintenance, and troubleshooting of manufacturing equipment like Test Jig, Tool and accessories to ensure optimal performance.
4. • Documentation: Create and maintain detailed process documentation, including work instructions, process flow diagrams, and standard operating procedures.
5. • Collaboration: Work closely with design engineers, production teams, and quality assurance to ensure seamless integration of new processes and technologies.
6. • Training: Provide training and support to production staff on new processes and equipment.
7. • Safety Compliance: Ensure all manufacturing processes comply with safety regulations and environmental standards.

Qualifications

· Education: Degree in Manufacturing Engineering, Electrical Engineering, or a related field.

· Experience: Minimum of 3-5 years of experience in electronic manufacturing process engineering.

Required Skills:

· Proficiency in process simulation software and statistical analysis tools.

· Strong problem-solving skills and attention to detail.

· Excellent communication and teamwork abilities.

· Knowledge of Lean Manufacturing, Six Sigma, and other continuous improvement methodologies.

· Familiarity with industry standards and regulatory requirements.

· Software skill: Python

Preferred Certifications:

· Certified Manufacturing Engineer (CMfgE)

· Six Sigma Green Belt or Black Belt

· Professional Engineer (PE) license

Dispositions:

• Enjoys leading & interacting with people of all levels.

• Independent with an outgoing personality

• Self motivated with a desire to achieve.

• Mature, Outgoing & result –orientated.

Work Environment:

· This position typically operates in a manufacturing environment with exposure to various production equipment and processes.

· Frequent travel to Batammay be required for training and collaboration with other facilities.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Mon to Fri 8.30am - 5.30pm

Responsibilities

Chemical & Process Management:

• Minimize downtime and assist with BFS machine operations during manpower shortages.
• Verify raw materials and maintain cleanliness in the mixing area.
• Coordinate cleaning (CIP & steam cleaning) and document chemical weighing and tests.
• Support RO water system regeneration.

Process Knowledge:

• Understand mixing flow and plant systems, including piping and water flow to BFS machine.

Skills & Requirements

• Quick learner, self-motivated, and able to work weekends as needed.
• Strong focus on safety and cleanliness.

Qualifications:

• Diploma in Chemical Engineering or related field.
• 1-2 years' experience in cleanroom or pharmaceutical settings.
• Ability to handle hazardous chemicals (Chemical hazard certification preferred).

Performance Expectations

• Achieve production and maintenance targets.
• Troubleshoot and minimize machine downtime.
• Collaborate effectively with the team and meet KPIs.

Interested candidate, Kindly Click on APPLY NOW

We regret that only short-listed candidates will be contacted shortly.

EA Licence No. | 14C7092

EA Registration No. | R1105417

EA Personnel | Chia Meng Yong ( Kenny )

You will be part of our Process + Systems Team to add your expertise + skills to the delivery of Business + Process Excellence.

Your Responsibilities

• To ensure operational excellence through adherence to designed processes + process audits.
• To oversee + ensure the delivery of process improvement projects with the objective of productivity and/or quality enhancement with lean methodology.
• To ensure high levels of data quality via analysis, review + action planning together with the business unit
• To support process improvement, process re-engineering + support the implementation of changed processes to improve the quality + productivity of operational processes + systems.
• To support the analysis of operational procedures, assisting with documenting + producing solutions.
• To apply project management in compliance with lean methodologies to ensure controlled + structured implementations, as well as assisting in planning + execution of project tasks.
• To strive for productivity increases through automation + optimization of operational processes to ensure better quality + customer satisfaction in alignment with corporate strategy.

Your Skills And Experiences

• At least 5 years of business process or supply chain management experience preferred.
• Professional education or degree in business or supply chain management.
• Strong analytical skills and experience in process analysis.
• Proficiency in English communication
• Supply chain expertise is an advantage.
• Preferably with Excel skills.

Roles and Responsibilities:

• Responsible for preparation and delivery of process calculations, design drawings and other documents for water, wastewater treatment, and air treatment projects.
• Aware the requirements for full compliance to local authorities
• Conduct process calculations such as treatment unit sizing, pipe or ducting pressure losses for above mentioned projects.
• Design PFD, P&ID drawings for these projects.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and pipings and ductings with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Evaluate technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Develop or provide design recommendations, value engineering and training to clients or co-workers
• Liaising with other departments (Project, QAQC or Commissioning) on schedule and deliverables timeline.
• Report to engineering manager.

Requirements:

• A recognized degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment.
• Master degree holders with less experience will be considered.
• Proficiency in CAD, MS office or other design softwares.  Strong analytical and problem solving, critical thinking skills.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.

Job Responsibilities:

• Lead Process Engineering and design, including process configuration and optimization studies
• Perform Process simulations and prepare Process/Utility Flow Diagrams, Heat and Material Balance and Utility Balances
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Prepare Process design philosophies and operating guides
• Collaborate on Concept studies, Feasibility reports, Front-End Engineering Design (FEED) and detailed design projects

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 15 years of relevant engineering design experience
• Good experience with Offshore FPSO, Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage
• Leadership experience in managing process teams for Hydrocarbon projects - Concept studies, Front-End Engineering Design (FEED), and detailed design projects
• In-depth understanding of process design, heat and material balance and P&IDs
• Preference given to candidates with Lead Engineer / Area Lead Engineer experience
• Familiarity with international codes and standards, software and tools

Your Job

Business Process Analyst

Our Team

You will be reporting to the Business Process Lead and you will be working in the Supplier Enablement team within Finance Solution Division.

What You Will Do

· Act as a liaison with suppliers from Vietnam, Korea, and other regions to facilitate seamless onboarding.

· Follow defined financial control procedures designed and accurately gather and verify information from suppliers to protect the company’s financial assets and ensure secure, timely outgoing payments.

· Review and validate information and supporting documentation provided by the supplier (Tax ID, bank details) prior to entering in the ERP system.

· Onboard suppliers through dedicated request platforms and maintain Vendor Master Data, ensure accuracy of the Vendor Master Data in the ERP systems.

· Work cross-functionally with procurement, finance, 3rd party suppliers, operations, & IT to execute e

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 6 years in semiconductor foundry module process,
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work