** New Plant to Open in 2026*

Position Summary:

The Shift Supervisor is responsible for monitoring and managing the production process of the EVAL

Manufacturing site, which will be launched in the second half of 2026, and makes any necessary

process changes to maintain the production safely and stably. The Shift Supervisors are responsible

for the efficient operation of the EVAL Plant in accordance with established procedures and work

instructions. Major tasks include managing direct reports on shift, plant performance monitoring,

feedback and troubleshoot abnormalities, conduct and follow up of individual training and

development plans of his people.

The Shift Supervisor reports to the Production Day Superintendent. Until the startup of EVAL

production line, training and learning opportunities of EVAL production technology are provided by

experienced members in Kuraray.

The Shift Supervisor is responsible for training and leading the new technicians to achieve safe and

stable commissioning and startup of the new EVAL plant.

Responsibilities:

 Support the Production Manager and Production Superintendent in process analysis,

troubleshooting and optimization of plant operations.

 Responsible for all aspects of shift operations and manage shift team manpower and

administration.

 Conducts daily shift meetings and assign duties to the shift team.

 Making emergency operating decisions.

 Leads Emergency Response Team as Site Incident Commander.

 Provide guidance to shift team for effective and safe operation.

 Ensure that periodic inspections are carried out to verify the smooth operation of all process

equipment. Work requests are to be raised to rectify equipment faults if necessary.

 Reviewing DCS conditions/trends, analytical results, area logbooks and reading sheets,

routine inspections of the process areas for equipment problems and housekeeping and

having process technicians take appropriate corrective action.

 Take corrective action to control and rectify deviations in process parameters in order that

finished goods are produced within specifications.

 Conduct on-job training and cross-training for technicians under their charge.

 Co-ordinate and control the receipt and delivery of chemicals and finished goods in the Plant.

 Ensure that non-conforming products and recycled materials are properly handed and

treated in accordance to established procedures.

 Participate and lend support in project management when required.

 Implementation of cost reduction ideas for utilities and waste streams

 Ensure compliance with regulatory, company, and departmental Safety and Environmental

guidelines, policies, and procedures.

 Prepare equipment for maintenance and commissioning of equipment.

 Work with Maintenance Department on Transition and shutdown maintenance planning

 Requirements

At least 10 years working experience in a petrochemical industry.

 Diploma in a relevant discipline.

 Experience in leading people in a supervision role.

 Good knowledge and application of all safety rules and safety processes required in a

chemical plant.

 Good oral and written communication skills

 Good problem-solving and troubleshooting skill.

 High level of initiative and clear judgment

• West, 5 days, Transport provided to & fro
• Basic salary: $3500 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits
• No experience can apply
• On-the-job training is provided

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• 1-2 years of relevant experience.
• Candidates with no experience can apply as on-the-job training is provided.
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• 
  
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• MNC Company
• Basic $2200 - $2500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Working Location: Jurong Island (Transport Provided)

Job Responsibilities:

• Responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations
• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement
• Any other duties as assigned

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Requirements:

• Min Nitec in Chemical Process/diploma in Chemical Technology

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Responsibilities:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Requirements:

• Min Nitec in Chemical Process/diploma in Chemical Technology

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Roles & Responsibilities

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.
• Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Perform site EHSS inspection/audits and ensure that all corrective/ preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.
• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.
• Operational hands-on experience
• Safety conscious

Education:

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

Location: Tuas (pickup at Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun)

Contract Duration: 1year

Salary: Up to 6K

5 days office hour

Job Description:

* Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.

* Develop, maintain and troubleshoot the process control system recipe / models.

* Carry out technical assessment for evaluation of processes

* Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or

* during batch record review.

* Develop, implement and monitor robust preventive measures for processing issues.

* Play a pro-active role in ensure the site safety and quality standards are adhered to.

* Proactively monitor, identify, develop and implement improvements in processes and equipment.

* Communicate on a regular basis to the plant personnel on process updates.

* Train the process technicians and fellow process engineers on the process and procedures as required.

Requirements:

-Min Degree / Diploma in preferably Engineering, Chemical Engineering or in Science with Major in Chemistry

-Preferably someone with min. 2 years of experience in pharmaceutical or chemical industry

Please email me at [email protected] or telegram at @alexgohhl

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Operations Executive to join their Warehouse Operations team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Optimize warehouse and administrative processes for efficiency.
• Identify and address improvement opportunities with staff and leaders.
• Drive projects to reduce waste, enhance productivity, and ensure sustainability.
• Implement digital tools to streamline workflows and improve the work environment.
• Present proposals to customers and coordinate implementation with stakeholders.
• Achieve annual targets for cost savings, sustainability, and customer improvement goals.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of warehouse operations, with exposure in process improvement projects
• Experience in automation tools such as powerbi, Python or power automate

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Requirements:

• Min Nitec in Chemical Process/diploma in Chemical Technology

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Description:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties.
• Complete all documentation including Record of Manual Operation (RMO), Cleaning Instruction (CI), Manufacturing Instruction (MI) according with GMP and GDP standards.

Requirements:

• Min. NITEC / Diploma in Chemical Engineering / Chemical Process Technology
• Exp in pharma industry will be an advantage
• Able to commit 12 hours rotating shift

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Job Description

• Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability
• Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
• Ensure no down time due to unavailability of spare parts.
• Service used equipment’s and components and ensure ready to use all time.
• Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
• Manage in-house contractors to execute maintenance timely and effectively.
• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
• Update long-term maintenance plan for facilities and utility equipment’s.
• It is a newly established 100% owned subsidiary international Parent company. To construct a new plant to produce solution-polymerized styrene-butadiene rubber (S-SBR) in Jurong Island.Ensure all maintenance activities comply with AKSS EHS policies.Will need to work on some weekend and outside office hours monthlyPlease find the attached job description for Maintenance Mechanical Engineer. We require 1 headcount for this position.Urgent Hire!.

Job Requirement

Requirements

1. Degree/Diploma in mechanical engineering or the equivalent
2. 3-5 years of experience in Plant & facilities in chemical plant.
3. Basic understanding of maintenance technology manufacturing process plant environment.
4. Demonstrated ability to adjust contractors independently and effectively.
5. Good interpersonal and communication skills
   

Job Responsibilities:

• Responsible for monitoring and controlling the plant operation, especially boiler and incinerator.
• Performs minor routine preventive maintenance and calibration of plant equipment to maintain operating efficiency.
• Plan routine maintenance schedule on equipment and maintain plant equipment under safety guideline.
• Regularly conduct patrolling and inspection on site to ensure process equipment free for any abnormalities.
• Assist in reviewing contractor work performance regularly.
• Perform other duties as assigned.

Job Requirements:

• Good interpersonal and communication skill
• With experience in leading a team of technicians
• Able to commit 12hrs shift and overtime work
• Experience in rotary incinerator and boiler operations

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Shift Pattern: 2-2-3 (8am - 8pm/8pm - 8am)

12m Contract (1.5m bonus)

Salary: 2500-3200 + 250 transport / With shift allowances approx. $500-$700

Jobscope:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

For interested candidates, please send your updated resume:

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

R2197171

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Equipment – CQV Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Experience in conducting equipment/facility FAT/SAT, IQ/OQ/PQ protocols, and serving as both author and executor of QSR (KAYE validator).

· Proficient in writing PQ, cleaning, development/study protocols, SOPs, and work instructions.

· Responsible for raising Change Control requests, identifying tasks, and performing impact assessments, with a focus on processes and process equipment.

· Experienced in writing deviations related to processes, cleaning, and process equipment (PQ).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

The role is responsible for Equipment Package Ownership (full lifecycle – Engineering Design, Build, Testing (FAT), Installation and Commissioning), including experience in commissioning and qualification of process equipment.

Responsibilities:

● Experience in upstream / downstream / Central services process operation, (experience in equipment design for process equipment will be an advantage).

● Project scheduling and able to come up solutions to keep the schedule on track when there are hiccups.

● Responsible for basic and detailed design, commissioning and qualification activities, including URS development, FAT, SAT, DQ, IQ, OQ and PQ.

● Review industry practices for best-in-class approach.

● Ensure that the appropriate Quality standards are applied consistent with best practice and internal Quality Standards and expectations.

● Deliver the project from conceptual through implementation phase, encompassing support for a wide range of engineering and construction requirements.

● Coordinates with different functions like manufacturing, safety, MSAT, validation and quality for implementation of changes associated with the project.

● Work independently and/or with the project manager to complete the engineering projects within schedule, budget and quality constraints.

● Agile response to equipment issue, troubleshoot and come up with solutions swiftly.

● Any other task as assigned by Supervisor/Manager.

About You:

● Diploma/Degree in Chemical Engineering, Chemistry or equivalent with at least 5 yearss experience in a process engineering role or similar role with a biologics manufacturing plan.

● At least 5 years of relevant working experience in the Pharmaceutical / Biologics manufacturing industry with experience in Process Engineer.

● In Biologics industry with understanding of cGMP requirement.

● Should have Design experience at various stages of project (Base, Detailed design).

● Able to support Installation, Commissioning & Qualification activity at site.

● Must be able to drive project.

● Any other task given related to Process.

Contract length: 12 Months. Option to extend depending on performance and business needs.