Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Requirements:

1. Proficiency in SolidWorks for creating in-process models, process sheets, and operation instructions.
2. Experience with SolidCAM software for generating NC programs for 3- and 4-axis machines.
3. Familiarity with Mazak and Fanuc controller systems. (NC Program)
4. Strong understanding of GD&T (Geometric Dimensioning and Tolerancing) in technical drawings.
5. Excellent communication skills in both English and Chinese.
6. Proficiency in Microsoft Excel, Word, and PowerPoint for preparing documentation.
7. Minimum of 3 years experience in precision engineering.

Job Description

• Oversee various stages of full project deliveries covering requirements gathering and analysis, design, construction, delivery, integration, testing, commissioning, and maintenance services
• Map out the overall project management plan and ensure that the roles and responsibilities, objectives, commitment, deliverables, schedule, and risks are clearly defined and communicated to team members and customers
• Establish a risk management plan for a structured approach to identify and review potential risks and mitigation actions
• Manage project budget and costs with the objective of maximizing revenue and margin achievements.
• Establish a project execution plan and schedule for tracking of deliverables within the scheduled milestones
• Build a high-performance delivery team, comprising both onsite and offshore resources, and provide effective leadership for the team members
• Oversee the entire project delivery life cycle within scope, schedule, and budget
• Maintain a pro-active and responsive relationship with all stakeholders, both internal management and customers, to provide regular and accurate progress updates, problem reporting and resolution processes
• Perform other duties as assigned

Requirements

• Min Degree in Mechanical / Electrical / Environmental Engineering (Degree must be recognized by the Professional Engineers Board, Singapore)
• At least 10 years of relevant experience in the implementation and management of qualify control systems
• Hands-on” attitude, meticulous and analytical with excellent problem-solving skills
• Professional project management certification (e.g. PMP, CITPM, etc) is preferred
• Team player with good interpersonal and communication skills
• Able to work under pressure, resourceful and independent with good negotiation skills

Job Description

• Industry/ Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job details

Salary

$3,000 a month

Job type

Full-time

Responsibilities: -

• Provide technical support to Operating Plants for safe & smooth plant operations
• In charge of daily chemical & mechanical processes.
• Initiate and implement plans for performance improvement and economic / capacity optimization
• Perform plant simulation to identify high return opportunities to business team
• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to Plant instability, Safety or Quality issues.
• Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.
• To in charge of equipment calibrations.
• To update production output regularly.
• All other ad-hoc duties as assigned

Requirements: -

• Min Diploma or with min 3 years relevant working experience can be considered as well.
• Competency in Microsoft applications including Word, Excel and Outlook.
• Able to liaise with English and Mandarin speaking customers
• 5.5-days work week.
• Location: Tuas South
• Able to start work immediately
• PR/Singaporean

Please note that only shortlisted candidates will be notified.

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description:
We are seeking candidates with hands-on experience in instrumentation within the process industry. The ideal candidate will have a strong background in the installation, maintenance, calibration, and troubleshooting of process control instruments and systems. Proficiency in working with field instruments, control systems, and safety protocols is essential.

Key Responsibilities:

• Install, calibrate, and maintain instrumentation systems in process environments.
• Troubleshoot and repair instrumentation issues.
• Ensure compliance with safety and industry standards.
• Collaborate with engineering teams for system upgrades and improvements.

Requirements:

• Proven experience in instrumentation within the process industry.
• Strong understanding of control systems, sensors, and measurement technologies.
• Knowledge of industry safety standards and procedures.
• Relevant technical certifications or qualifications.

If you meet these criteria, we invite you to apply and join our dynamic team.

Job Description:
We are seeking candidates with hands-on experience in instrumentation within the process industry. The ideal candidate will have a strong background in the installation, maintenance, calibration, and troubleshooting of process control instruments and systems. Proficiency in working with field instruments, control systems, and safety protocols is essential.

Key Responsibilities:

• Install, calibrate, and maintain instrumentation systems in process environments.
• Troubleshoot and repair instrumentation issues.
• Ensure compliance with safety and industry standards.
• Collaborate with engineering teams for system upgrades and improvements.

Requirements:

• Proven experience in instrumentation within the process industry.
• Strong understanding of control systems, sensors, and measurement technologies.
• Knowledge of industry safety standards and procedures.
• Relevant technical certifications or qualifications.

If you meet these criteria, we invite you to apply and join our dynamic team.

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.

Responsibilities

• Documenting and definng the Factory & Production processes and procedures across the Group
• Recommend and implement improvements to process and process automation
• Deploy and implement the Production processes and procedures in Singapore and overseas
• Manage the next-gen production system for switchgear manufacturing and assembly
• Responsible for the Audit and Compliance of Factory and Process Engineering across the Group
• Any other duties related to operations and process engineering

Requirement

• Degree/Diploma in Electrical, Mechanical Engineering or related field
• At least 2 years of relevant working experience in process engineering in the manufacturing environment
• Have initiative, able to work independently
• Possess strong analytical and problem solving skills
• Good communication and written and presentation skills
• Able to travel overseas

Job Responsibilities:

• Design Gas Compression package, Power Generation package, Process Module (dehydration, refrigeration, seawater treatment system, etcs), for oil & Gas production facilities, ie FPSO, FPU, offshore fixed platform, etcs.
• Coordinate with other engineering disciplines to ensure compliance with standards (API, DEP, etcs) and clients’ specifications.
• Collaborate with clients and principals for design optimization.
• Participate in technical meetings (Hazop, Technical Clarification meeting), may require overseas travel.
• Any other ad-hoc as assigned

Job Requirements:

• Minimum Diploma / Degree in Chemical Engineering or Mechanical Engineering.
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• In house & overseas training will be provided if required.
• Able to work independently in a flexible, dynamic and fast-paced environment.
• Positive working attitude.

Working hours: 8am to 5pm

Transport provided at the nearest MRT.

For keen applicants, please email [email protected]

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Operations Executive to join their Warehouse Operations team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Optimize warehouse and administrative processes for efficiency.
• Identify and address improvement opportunities with staff and leaders.
• Drive projects to reduce waste, enhance productivity, and ensure sustainability.
• Implement digital tools to streamline workflows and improve the work environment.
• Present proposals to customers and coordinate implementation with stakeholders.
• Achieve annual targets for cost savings, sustainability, and customer improvement goals.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of warehouse operations, with exposure in process improvement projects
• Experience in automation tools such as powerbi, Python or power automate

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

Process Technician

Our client is a leading global manufacturer of polymer. They are currently seeking for Process Technicians to operate and monitor their manufacturing process.

The role of the Process Technician includes:

• Operate the process to meet the conditions specified in manuals/instructions
• Operate the process equipment at site in accordance with operation plan.
• Take measures to improve production status and equipment performance on productivity and quality after approval of shift senior technician
• Patrol plant process, confirm the condition of process and equipment and report disordered matter to senior shift technicians.
• Prepare and organised patrol records.
• Take a sampling for analysis of products and process evaluation.
• Report all incidents, near misses, deviation from plan and take part in further investigation when required.
• Assist in coordination of daily maintenance planning and participate in maintenance activities and shutdown/start-up of sections.
• Provide support for maintenance group /quality control group if any problem arises.

Job Requirement:

• Diploma or NITEC in Chemical engineering or equivalent.
• Minimum 3 years experience in chemical plant. The experience in polymerization unit and extrusion unit or a minimum 3 years experience in manufacturing plant such compounding or extrusion is advantageous.
• Possess basic knowledge of maintenance, chemical engineering and analytical procedures.
• Experience in operation via DCS systems is advantageous
• An effective team player with good communication
• Able to work in a fast-paced environment.

Other information:

• Company bus provided
• Fixed allowances including transport allowance, site allowance etc

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to unacceptable submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

Company Summary:
Since 2002, DVI Solutions has been a leading provider of audio-visual setups to help our clients communicate and collaborate better--whether it's with colleagues across the office, or partners on the other side of the world. We have presence across Singapore, Thailand, Shanghai, Hong Kong, Philippines, Vietnam, India, Malaysia and Indonesia. Our satisfied clients include corporations, government agencies, schools, retail stores, hotels and many more.

Position Summary:
This role will drive business operations and strategies, including establishing scope and performing detailed business impact analysis in support of management decisions. Additionally, you'll define roles and responsibilities, establish and document requirements, escalate and ensure issues/decisions are resolved, create and manage implementation plans, and lead/participate in meetings at the operational and project level.

Responsibilities:

• Handle business operations from project management to business process analysis, reports generation, financial reports analysis and more
• Business/project analysis, including documenting business requirements, detailing issues and risks, and drafting business processes and data flows
• Data analysis, including data collection, synthesis, and translation of results into concrete actionable solutions
• Identify gaps between applicable requirements and current procedures/controls and participate in driving resolution of business
• Work with business partners to design and implement enhancements to existing processes and/or business applications, introduce new processes and/or toolsets.
• With guidance, develop and implement solutions that strengthen business operating models, enhance the client experience, and improve efficiency and controls
• Define user acceptance test plans and test cases, coordinate and execute user acceptance testing and interpret, assess, and communicate results to enable signoff on deliverables
• Provide implementation support, inclusive of process change management, and ensure those implementations meet company’s requirements

Required Experience:

• Open to fresh graduate from business, finance or related field.
• Excellent communication and presentations skills across various stakeholders and senior management
• Excellent analytical and logical thinking to understand and analyse complex business processes
• Ability to analyse and resolve project-related issues and follow through with set objectives
• Ability to deal with different stakeholder groups to elicit business requirements, procedures, and processes
• Open to occasional regional travel

DVI Solutions is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Technician to be part of our Process Integration (YDD) diverse team of talent.

What you will be working on:

• To perform inline inspection and recipe setup for brightfield and darkfield inspection tools.
• To perform Optical / SEM reviews and defect classification for OOC lots
• To generate Defect Notice for OOC lots and inform respective departments
• To manage the WIP and response to request from other departments
• To assist YDD Engineer on analysis and assessment
• To perform reticle printdown inspections and check for repeater defects.

More about you:

• 3-5 years’ relevant fab experience
• Ability to multi-task and work under stress
• Willing to work on shift (Day/ Night)

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Overall, in-charge of the terminal operations to ensure efficient and safe operations.
• Responsible for the department's resources and budget to meet the company's objectives.
• Display all-aspect service excellence by elevating the organisational behaviour, culture and thinking in service design, planning, execution and follow-up on operational matters.
• Create ideas to develop the annual and long-term business plans, forecast performance and develop business case for new projects and estimate financial and resources required to deliver performance targets.
• Monitor and evaluate operations on site are carried out in accordance with safety, health, environment and loss preventive policies, rules, regulations and according to company’s standards.

Requirements:

• Degree in any relevant engineering discipline.
• At least 5 years of terminal operations experience in Oil & Gas/Chemical Process Plant.
• Strong knowledge in operational process, safety and product knowledge.
• Proven leadership and people management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Operations Executive to join their Warehouse Operations team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Optimize warehouse and administrative processes for efficiency.
• Identify and address improvement opportunities with staff and leaders.
• Drive projects to reduce waste, enhance productivity, and ensure sustainability.
• Implement digital tools to streamline workflows and improve the work environment.
• Present proposals to customers and coordinate implementation with stakeholders.
• Achieve annual targets for cost savings, sustainability, and customer improvement goals.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of warehouse operations, with exposure in process improvement projects
• Experience in automation tools such as powerbi, Python or power automate

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Provide process engineering expertise for process design, process scale-up, trouble-shooting and process efficiency improvements. Interrogate laboratory working directions to determine optimum plant configuration to ensure that the process [chemistry + plant] meets the scale-up objectives in a safe manner. Support capital projects for R&D Jurong.

Key Responsibilities

Lead process engineering activities for NCE projects in the pilot plant

• Review of chemistry scale-up requests with Chemists, Operations and Engineering to determine optimum plant configuration.
• Define detailed plant and modification design. The time period for introducing new chemistry onto plant is usually less than 4 weeks, during which time any new equipment requirements must be identified, designed, fabricated, installed [by on-site staff or contractors], commissioned, tested and operating staff trained in use before chemical processing starts.
• Agree level of hazard assessment with Operations and complete Process Risk Assessment.
• Review batch record, carry out installation checks, write WI [Work Instruction] or SOP [Standard Operating Procedure] as required and train operators.
• Support campaign on plant, troubleshooting any engineering issues.

Technology Transfers

• Generate sufficient process engineering information for GSC to ensure that the process can be effectively introduced into the desired production plant.
• Support synthetic organic chemists, process safety scientists, and process chemists in the design of processes suitable for effective scale-up.
• Assess critical process characteristics and requirements as well as existing plant capabilities and limitations by gathering and interpreting suitable experimental data.
• Significantly contribute to the development of robust manufacturing processes for the synthesis of bulk drug substance by evaluating alternative processing strategies and recommending potential process improvements.
• As a member of the ChemDev project team, identify and effectively communicate the best suitable scale-up strategy for a process including recommendations for the application of new processing technologies.
• Play an important role in facilitating a seamless technology transfer of processes to GSC by the application of state-of -the-art tools and procedures.

Capital Projects

• Act as client representative for capital projects, to ensure all the customer needs are incorporated into the design and installation of new plant and equipment.
• Identify areas of weakness in the portfolio of processing technologies (plant and equipment) and submit proposals to address these.
• Define and seek approval for the detailed project scope of plant and equipment projects, and obtain approval for capital orders and PIP's.
• Review and make recommendations on design proposals put forward by contractors, project engineers, and equipment suppliers.
• Organise HAZOP studies, act as technical recorder, and issue HAZOP report for all installations where appropriate.
• Issue commissioning programmes, lead commissioning activities, and issue final reports.
• Carry out pre-delivery inspection visits for new equipment, prior to acceptance on site.
• Compile equipment WIs.

Knowledge, Skills & Experience

• Min A level certification
• Experience in pharmaceutical industry
• Experience in pharmaceutical process
• In depth working knowledge of the safety and compliance requirements for equipment and systems used in it.
• Strong written and verbal communication skills.
• Ability to multi-task and prioritize workload

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

(A) Primary Function

1. Responsible for all engineering related activities of the product line concerned.

2. Responsible for quality of products at all stages and drive production yield.

3. Identify and initiate actions to prevent occurrence and recurrence of product, process, quality systems nonconformities.

4. Work as a team with all departments to achieve mutual agreement on specification required by customers.

5. Ensure all products meet the standard cycle time and minimise machine and mold down time.

6. Implement improvement plans to enhance efficiency of process, material and manpower.

7. Responsible for new RFQ enquiry and advise the management the feasibilities for mass production.

8. Responsible for resolving discrepancies and technical issues related to product with customers.

(B) Duties and Responsibilities

1. Establish optimum process parameters and meeting specific cycle time for new product.

2. Analyze defect reported in-house and customer with quality, tooling and production.

3. Responsible to test and qualify all new molds by applying systematic molding that includes Load Senstivity Test, Viscosity/Shear Rate Test, Gate Freeze Test, Thermal Mapping of Mold, Short Short Test etc.

4. Must perform DOE on molding process parameter for process window study.

5. Attend to all daily quality and process related issues.

6.Prepare and execute process validation protocols and reports for new and existing products with tooling and quality personnel for all customers.

7. Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

8. Perform internal quality system audit.

9. Train and assess production staff on processes as well as WI as and when required.

10. Attend routine production and quality meetings.

11. Execute engineering change notice from customer/ in house and update ERP system promptly.

12. Compliance to all regulatory and in house system requirements especially for medical and automotive customers.

C) Qualifications / Requirements

1. Degree/Diploma in Engineering-related discipline, preferably in Polymer and Plastic technology, Mechanical.

2. At least 3 years related experience/knowledge in Plastic Injection Molding, preferably in medical and automotive industries.

3. Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.

4. Possess strong leadership, positive attitude, analytical and good interpersonal skills.

5. Results-oriented, meticulous and a self-motivated team player.

Job Scope: To contribute as part of a process safety team on a proposal / project, in collaboration with different departments and process safety section, to manage Major Accident Hazards (MAHs) and prevent and mitigate Major Accident Events (MAEs) throughout the lifecycle of the facility.

Responsibilities:

• Develop / Support the development and review of HSSE Design Philosophy, and other process safety-related philosophies. Provide guidance to the proposal / project for compliance to company standards, client and regulatory requirements of safetyrelated systems.
• Develop / Support the development of scope of work, perform safety consultant technical bid evaluation, participate in workshops, plan, review and deliver safety studies / deliverables. Deliver complete, correct, and on-time safety studies and deliverables to the proposal / project, demonstrating risks are As Low As Reasonably Practicable (ALARP).
• Organise Bow-Ties workshops, define SCEs, communicate performance standards requirements, review SCE design, manage tracking and review of EPCI assurance tasks, as instructed by the Principal Engineer, to ensure that safety critical elements are designed, procured, constructed, commissioned, and installed in accordance with performance standards for the prevention and mitigation of MAEs.
• Coordinate and manage risk consultant/subcontractor to ensure the risk of the facility is properly assessed in accordance with the scope of work and methodology, in a timely manner and on budget.
• Collect risk assessment input data, review risk assessments, prepare deliverables, review other discipline deliverables, and collaborate with other disciplines and departments, as instructed by the Principal Engineer or assigned engineer. Issue accurate deliverables, minimizing mistakes and maximizing efficiency. Minimise / manage deviations from company standards, client and regulatory requirements of safety-related systems.
• Contribute to the achievement of Project / Engineering Performance Goals defined for the year / project.
• Collaborate with the proposal / project team, consistently check deliverables for compliance, attend / support audits and resolve non-conformities to deliver a regulatory compliant installation. Minimise non-conformities and delays to first oil.
• Communicate professionally with the client, provide responses to client comments, as instructed by the Principal Engineer, such that the client is satisfied that hazards are managed appropriately.
• Collaborate with the project team to ensure that changes are managed in accordance with the Management of Change Procedure and their impact on risk are properly evaluated.
• Identify and communicate lessons learnt for improved management of MAHs and project execution.
• Ensure technical competencies are met and guide the development of process safety engineers to improve technical competency and soft skills.
• Comply with Group Policy, Code of Business Conduct and Ethics at all times.

Requirements:

• Minimum 7 years of relevant working experience in Process Safety engineering in the oil and gas sector for a bachelor’s degree in Chemical / Environmental / Mechanical Engineering, or minimum 6 years of relevant working experience for a master’s degree, or minimum 12 years of relevant working experience for a diploma holder.

Interested applicants are welcome to submit your MS Word resume to:

[email protected]

EA Personnel: R1109773

EA Licence: 07C3676

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills