Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally.
• Strict adherence to Micron Intellectual Property protection policy is a must.

Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcomed to apply.
• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport
• 2-3 years of experience in Semiconductor Equipment/Process development is preferable
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development.

Shift Pattern: 2-2-3 (8am-8pm / 8pm-8am)
Contract Duration: 12 months (with a 1.5-month bonus)
Transport Pickup Locations: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun

Additional Benefits:

• 12 days annual leave
• $400 outpatient claims (Pro-rated based on contract duration)
• Transport allowance / With shift allowances

Job Responsibilities:

• Perform manual tasks such as lifting, carrying, shifting, and transferring materials/chemicals.
• Engage in production activities, including receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, and housekeeping, according to SOP.
• Ensure effective communication and proper handover of shift duties.

Apply now by sending your resume to [email protected], or call 9040 9394 for more enquiries.

We regret to inform you that only shortlisted candidates will be notified.

Ashley Loo | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

Responsibilities

• Follows the currently valid guidelines (e.g. working instructions, process descriptions, hygiene rules, environmental protection guidelines, cGMP, clear table policies)
• Independent execution of different process steps and surveillance of process execution according to written working instructions, according to the training level of the employee
• Notifies the supervisor of any observed discrepancies (process and quality discrepancies, security breaches, outdated calibration data, deviations in the documentation)
• Maintains a correct and conform documentation (e.g. when completing move tickets or inspection protocols)
• Highlights any issues immediately to the supervisor or the HR department
• Participates actively in the KAIZEN process (e.g. minimize waste)
• Contributes to a positive working culture
• If needed, performs individual tasks defined by the supervisor which in their nature belong to the work responsibility of an operator and/or are a necessity to achieve organizational performance
• Maintain a safe work environment and ensure the maintenance and upkeep of the physical location.
• Assist in any other functional duties as assigned

Requirements

• Proficient in Microsoft Office

Interested applicants please email your resume to [email protected]

Megan Ng Su Ting

CEI Registration No.: R23115059

Recruit Express Pte Ltd

EA Licence No: 99C4599

*** We regret that only shortlisted candidates will be contacted.

Senior Process Engineer – Wastewater Treatment Design

Our client is an expanding environmental solutions company specializing in industrial wastewater treatment, as well as water reclamation & recycling. With expertise in design & build, EPCC and O&M services, they’re now seeking a Senior Process Engineer to lead their team in the design, implementation and optimization of wastewater treatment processes and systems.

Job Responsibilities

• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum Degree in Chemical Engineering, Environmental Engineering or related field
• Possess process/mechanical design experience with wastewater treatment projects
• Must be willing to be hands-on to be on site occasionally
• Must be able to draw and review drawings (i.e. create process flow diagrams (PFDs), piping and instrumentation drawings (P&IDs), perform detailed calculations related to plant process design)

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Operations Executive to join their Warehouse Operations team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Optimize warehouse and administrative processes for efficiency.
• Identify and address improvement opportunities with staff and leaders.
• Drive projects to reduce waste, enhance productivity, and ensure sustainability.
• Implement digital tools to streamline workflows and improve the work environment.
• Present proposals to customers and coordinate implementation with stakeholders.
• Achieve annual targets for cost savings, sustainability, and customer improvement goals.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of warehouse operations, with exposure in process improvement projects
• Experience in automation tools such as powerbi, Python or power automate

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Scope: To contribute as part of a process safety team on a proposal / project, in collaboration with different departments and process safety section, to manage Major Accident Hazards (MAHs) and prevent and mitigate Major Accident Events (MAEs) throughout the lifecycle of the facility.

Responsibilities:

• Develop / Support the development and review of HSSE Design Philosophy, and other process safety-related philosophies. Provide guidance to the proposal / project for compliance to company standards, client and regulatory requirements of safetyrelated systems.
• Develop / Support the development of scope of work, perform safety consultant technical bid evaluation, participate in workshops, plan, review and deliver safety studies / deliverables. Deliver complete, correct, and on-time safety studies and deliverables to the proposal / project, demonstrating risks are As Low As Reasonably Practicable (ALARP).
• Organise Bow-Ties workshops, define SCEs, communicate performance standards requirements, review SCE design, manage tracking and review of EPCI assurance tasks, as instructed by the Principal Engineer, to ensure that safety critical elements are designed, procured, constructed, commissioned, and installed in accordance with performance standards for the prevention and mitigation of MAEs.
• Coordinate and manage risk consultant/subcontractor to ensure the risk of the facility is properly assessed in accordance with the scope of work and methodology, in a timely manner and on budget.
• Collect risk assessment input data, review risk assessments, prepare deliverables, review other discipline deliverables, and collaborate with other disciplines and departments, as instructed by the Principal Engineer or assigned engineer. Issue accurate deliverables, minimizing mistakes and maximizing efficiency. Minimise / manage deviations from company standards, client and regulatory requirements of safety-related systems.
• Contribute to the achievement of Project / Engineering Performance Goals defined for the year / project.
• Collaborate with the proposal / project team, consistently check deliverables for compliance, attend / support audits and resolve non-conformities to deliver a regulatory compliant installation. Minimise non-conformities and delays to first oil.
• Communicate professionally with the client, provide responses to client comments, as instructed by the Principal Engineer, such that the client is satisfied that hazards are managed appropriately.
• Collaborate with the project team to ensure that changes are managed in accordance with the Management of Change Procedure and their impact on risk are properly evaluated.
• Identify and communicate lessons learnt for improved management of MAHs and project execution.
• Ensure technical competencies are met and guide the development of process safety engineers to improve technical competency and soft skills.
• Comply with Group Policy, Code of Business Conduct and Ethics at all times.

Requirements:

• Minimum 7 years of relevant working experience in Process Safety engineering in the oil and gas sector for a bachelor’s degree in Chemical / Environmental / Mechanical Engineering, or minimum 6 years of relevant working experience for a master’s degree, or minimum 12 years of relevant working experience for a diploma holder.

Interested applicants are welcome to submit your MS Word resume to:

[email protected]

EA Personnel: R1109773

EA Licence: 07C3676

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Job Summary

Process & Mechanical design, design review, RFQ preparation, technical evaluation, site installation supervision and coordination.

Job Description

• Review engineering standards/specifications/drawings, tender, quotations and proposal documents.
• Preliminary and detailed process & mechanical design of chemical plant, incineration plant, food waste plant, water/wastewater plant, offsites & utilities, pollution abatement, etc. including mechanical specification, design calculation, equipment layout design, support design, etc.
• Collaborate with BIM team for 3D model development and ensure the model is according to design.
• Coordination of internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are achieved and exceeded.
• Prepare mechanical equipment requisitions and to ensure that the items procured are in accordance with specifications and schedule to ensure timely delivery.
• Technical review of mechanical equipment/system vendors proposal and submission.
• Coordination with equipment/system vendors on mechanical design and installation work during project execution stage.
• Prepare mechanical technical submissions and work with design lead to liaise with stakeholders, not limited to client/project consultant for submission approval.
• Prepare method statement for all the equipment installation
• Support during construction, installation, start-up, testing and commissioning activities.
• Ensure compliance & perform any other duties as requested by design lead/ engineering management.

Requirement

• Bachelor’s degree in Chemical or Mechanical Engineering or related engineering discipline.
• 3 years and above in process & mechanical design in process plant (such as chemical plant, incineration plant, food waste, water/wastewater plant, offsites & utilities, ACMV, pollution abatement, etc) and hands on experience working in fast paced, diverse and multi-disciplined projects and O&M activities.
• Familiar with process & mechanical design code of practice and standards in Singapore, EN, ASME & PED.
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.

1. Packing of finished product into paper bags weighing 20kg to 25kg
2. Stacking of finished product packed in paper bags onto wooden pallets
3. General housekeeping of work area
4. Ad hoc duties as assisgned by supervisor
5. Candidate will be trained to run production of chemial processes when more experienced
6. Protective gear must be worn during work (E.g. safety helmet, mask, ear plugs, gloves, safety boots)

Domain: Electronics (not mandatory)

Location: North, Singapore

Resource needs to assist Director/Manager in preparing MS Excel presentations, to do interactions with different departments

* Experience in Advanced Excel tool

* Good experience in reports preparation and presentation to seniors

* Good to have PowerBI, Tableau User Level experience

* Good communication skills

* Need to report to Senior Manager/Director

• Responsible (review and check) Process Engineer/s and Process Supervisors works.
• Define System Design Deliverables and review with leads to finalise that suit to the project.
• Scope of works to review with leads and get confirmed with client.
• Develop and / or review design documentation as per Deliverable List with leads e.g. Process Flow Diagrams Piping and Instrumentation Drawings, System Layouts, Equipment and Instrumentation data sheets.
• Review and participate in tendering activities (tender preparation, tender interview/clarification meetings, evaluate proposals submissions and Tender Recommendation Report preparation).
• Perform engineering reviews on vendor documentation to ensure compliance and completeness in technical scope.
• Brief Process Engineers/Supervisors on the project scope and ensure system complete on schedule.
• Participate in Risk and Process Hazard Analysis.
• Prepare budget and cost estimations.
• Mentor and provide guidance to Process Engineers in their work.
• Support implementation of Engineering Efficiency activities.
• Plan, organise and approve Inspecting and Test Plant, Inspection Qualification and Testing and Commissioning.
• To take role as Work Package Owner (WPO) responsible for packages progress to completion with help of supervisor and final handover documents.
• Promote safe work practises.
• Promote commercial awareness.
• Participation in providing inputs to Knowledge centre and utilization of temp plates, materials.
• BIM Modelling internal reviews with BIM/CAD Team , CSA & MEP counter parts and review with client for LOD 400, 450 and 500
• Ad-hoc duties as determined by Management.

Job Qualifications:

• Bachelor’s Degree in Chemical or Environmental Engineering
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• With 6 - 8 years of relevant experience
• Experience in design and/or construction in either Deionised/Ultrapure Water or Wastewater or Chemical or Gas Systems
• Experience in leading team in throughout project cycle start from concept design, detail design, construction, testing and commissioning, handing over.
• Understanding of Codes and Engineering Standards of International Clients.
• Conversant in the use of design software.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

GEOLUTIONS is an independent geotechnical instrumentation specialist, executing specialized geotechnical contractor services for projects under the LTA, HDB, and private sectors. Our primary areas of expertise include foundation testing, instrumentation and monitoring, and site investigation activities.

WE ARE LOOKING FOR an experienced Project Engineer to manage the submission of MSRA, CAD drawings , NCE Applications , POWS applications , ground improvement scopes and related submissions to our clients.

JOB DESCRIPTION:

• Prepare design calculations, CAD drawings and MSRA , NCE Application , POWS Application for site investigation (and associated works) and foundation testing works
• Responsible for timely submission of method statements to client
• To coordinate & liaise with contractor, QP, or authorities for projects specifications & other technical requirements
• Attend meetings inclusive of technical meetings , Coordination Meetings and presentation with our clients
• Review comments from relevant authorities and respond to them
• Document control and compilation accordance to company SAC Singlas standards

QUALIFICATIONS & EXPERIENCE:

• Applicants should hold a degree in Civil Engineering , Geology or a related field.
• Candidates must be able to handle stress and maintain efficiency in a dynamic work setting.
• The ideal candidate should be capable of working independently while also being proactive in seeking advice from more experienced colleagues when necessary.
• Applicants should have at least two years of relevant work experience.
• Candidates must be skilled in using AutoCAD software.
• A strong understanding of instrumentation and monitoring, site investigation, and foundation design specifications is essential.
• Experience in Ground Improvement works (e.g. Rock Fissure Grouting) is highly preferred.

YOUR WORK ENVIRONMENT will be site-based Western part of Singapore. Our team is characterized by its youthful energy, dynamic spirit, and goal-oriented approach. The work environment is highly dynamic and presents a range of challenges. Matching the tempo of our operations will lead to rapid career advancement for those who can keep up with the pace.

Interested candidates, please submit your CV to [email protected] , [email protected]

Responsibilities:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Requirements:

• Min Nitec in Chemical Process/diploma in Chemical Technology

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

• 5 days, Boon lay, Transport provided to & fro
• $4000 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Jurong West, Transport
• $4000 - $4700 basic salary, 1mth AWS, performance bonus
• Medical/dental benefits
• Able to start within short notice/1 month

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Descriptions

• To reach the departmental quality target.
• Work closely with the production team and supplier to investigate and troubleshoot for process related problem
• To initiate evaluation and improve the existing process
• Standardize work procedures and provide training to all technicians and operators
• Provide guidance and motivation to all team members
• To answer qualities complaints and any discrepancies that arise
• To prepare a plan for the subsequent quarter and review for MBO (Management by objective)
• To initiate continuous cost reduction activity

Job Requirements

• Bachelor's Degree in Chemical Engineering
• Proficiency in Microsoft Office
• Strong analytical skill problem-solving skills
• Ability to multitask
• Able to handle a few projects at the same time
• Prefer one with at least 5 years of relevant working experience

Responsibilities:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Requirements:

• Min Nitec in Chemical Process/diploma in Chemical Technology

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• West, 5 days, Transport provided to & fro
• Basic salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186