Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Title: Sputter Process Engineer (ID1603)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift
Night Shift: 8:00pm – 8:15am
Salary: $2800 - $3600
Benefit: 12 days Annual Leave, AWS and Variable Bonus


Job Description
• Ensure the sputtering machine is tuned to operate at maximum capacity without compromising performance.
• Adjust the sputtering parameters to maintain high-quality output, minimizing defects and inconsistencies.
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition.
• Optimize the sputtering process to maximize the efficient use of materials, reducing waste.
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional
• issues.
• Analyze data from the sputtering process to identify trends, issues, and areas for improvement.
• Based on data analysis, make precise adjustments to the sputtering machine to enhance performance and quality.
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results
• over time.
• Any other job assigned by superior.

Requirement:
• Diploma or Bachelor's degree in any Engineer-related field.
• Minimum 4 years of experience in manufacturing process related role for Diploma Holder
• Material Science & Chemistry Fresh Graduate for degree profile.
• Fresh Graduate with strong technical understanding
• Understanding of Sputtering technology
• Good knowledge of Minitab, Microsoft Office

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

Our large-scale Food Science program, ‘Proteins4Singapore,’ funded by Singapore’s National Research Foundation (NRF), is a collaborative effort between the Technical University Munich (TUM), Nanyang Technological University (NTU), the Singapore Institute of Technology (SIT), and A*STAR’s Singapore Institute of Food and Biotechnology Innovation (SIFBI). As part of the Proteins4Singapore team, you will work alongside renowned scientists in plant and food technology, food chemistry, materials science, and business sustainability. Through interdisciplinary collaboration, the program aims to develop state-of-the-art methods and techniques to ensure a sustainable protein supply for highly urbanized environments.

Please visit www.tum-create.edu.sg for more information about TUMCREATE.

Job Summary

We are seeking a highly motivated and skilled Research Fellow to join our dynamic research team focusing on designing, adapting, and implementing cutting-edge mechanical and electronic systems for a decentralized food manufacturing model. As part of the Proteins4Singapore project, this role involves on utilizing simulations and advanced control systems to optimize and ensure quality in novel food textures and forms. This position plays a critical role in advancing sustainable protein solutions for urban environments through interdisciplinary collaboration, drawing expertise from mechanical engineering, mechatronics, and food engineering. This is a 1-year contract with the possibility of extension after the first year.

Key Responsibilities

• Develop a closed-loop control system to synchronize high-moisture extrusion and shape manipulator systems with a seamless integration and quality assurance.
• Integrate a variety of non-invasive sensors for a continuous and active monitoring on a food shape manipulator system.
• Develop and adapt custom firmware to integrate extrusion, in-line monitoring and control system with software protocols.
• Work closely with interdisciplinary teams to combine multiscale structural analysis with food processing methods, such as 3D printing and extrusion, supporting the project’s overarching goals of promoting sustainable food technologies and creating novel approaches for analyzing food texture.
• Engage in collaborative research, data analysis, and interpretation, while contributing to the writing of research papers, reports, and presentations for dissemination at conferences and in peer-reviewed journals.
• Participate in lab meetings, seminars, and collaborative research discussions to align with project goals and objectives.
• Supervise junior group members including undergraduate and doctoral students.

Key Competencies

• Proficient in firmware and software development, with experience in real-time systems, control algorithms, and open-source platforms.
• Strong background of at least 3 years in mechatronics, electronic systems, and automation; ideally experience with CFD, FEM simulations, and rheology for material flow analysis.
• Experience with food processing technologies, particularly food-grade and semi-solid materials, and a focus on safety and user-centric design.
• Publication as key author in related journals.
• Excellent communication skills, both written and verbal, in particular communication of complex scientific concepts to both specialists and non-specialists in a multidisciplinary research environment.
• Proven ability to conduct independent research and collaborate in multidisciplinary teams including working effectively within deadlines.
• Self-motivated and adaptable, with strong problem-solving skills and the ability to thrive in a dynamic, fast-paced research environment.

Qualification Requirements

• Ph.D. in Mechanical Engineering, Mechatronics, Food Processing, Industrial Engineering, or cognate discipline from a reputable university.
• Demonstrated ability in firmware programming and real-time process control integration.
• Strong communication skills, both verbal and written, with the ability to document processes and present findings effectively.

What we offer

• A collaborative and inclusive research environment.
• Access to state-of-the-art laboratory facilities and equipment.
• Opportunities for professional development and career growth.
• Engagement with a leading research team committed to advancing an emerging topic of global relevance.

Applications

Please send your complete application including a cover letter and detailed CV to [email protected].

Only shortlisted candidates will be contacted.

We are looking forward to your application!

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

We are hiring Contract Process Engineer to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Develop and maintain Manufacturing/Operating Instructions and SOPs.
• Manage and troubleshoot process control system recipes/models.
• Conduct technical assessments and process evaluations.
• Investigate and resolve quality and EHS issues during manufacturing or batch record reviews.
• Implement and monitor preventive measures for process issues.
• Ensure adherence to site safety and quality standards.
• Identify and drive improvements in processes and equipment.
• Regularly update plant personnel on process changes.
• Train process technicians and engineers on procedures and best practices.
• Oversee key equipment/GMP systems, ensuring compliance during internal and external audits.

Job Requirements

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science with Major in Chemistry.
• 2 - 4 years of experience Pharmaceutical/Chemical Plant with some understanding of API unit of operations
• Good knowledge of Good Manufacturing Practices.
• Excellent interpersonal and communication skills, both verbal and written
• Strong team player, adaptable and versatile with the ability to work across different cultures.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan Shan Pei
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

• assist in manual work such as lifting, carrying, shifting, transferring of materials/chemicals.

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.

• Ensure proper communication and handling over of shift duties

Requirements:

• Minimum Diploma/Nitec in Chemical or related fields

Salary: Up to $3200 (basic) additional transport and shift allowance will be given

Duration: Immediate for 1 year

Location: Tuas (islandwide pickup)

Shift Pattern: 2-2-3 (8am-8pm/8pm-8am)

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

• MNC (Manufacturing) - Cable & Connection Technology

• Working Hours: Monday - Friday: 8.30am - 5.30pm

• Working location at Tuas

• AWS + Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing process elements.
• Create Bill of Materials structure.
• Create manufacturing Work Instructions and other process documents in collaboration with the Program Management, Production and Quality Assurance Teams.
• Carry out time studies and update the process cycle times.
• Provide timely technical support to the Production Team pertaining to manufacturing process and quality issues.
• Engage in DFM and Lean Line Design activities.
• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.
• Actively and continuously improve the work processes to improve work efficiency and quality.
• Work with Program Management, Production, and Quality Assurance Teams to identify potential process risks and make recommendations to mitigate these risks.
• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Requirement

• Diploma in Electrical, Mechanical/Mechatronics, Manufacturing/Production, Industrial Engineering or relevant discipline
• 2 - 3 years of relevant experience in manufacturing process engineering
• Possess experienced in the creation Bill of Materials structures will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• 5 days, Jurong, Transport provided
• Basic salary: $4000 - $4800, AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• 1-3 years of relevant experience in Process Engineering
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Location: Tuas (Pick Up @ Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun)

Working hours: Shift Pattern, 8am - 8pm / 8pm - 8am

Basic salary: Up to $3200

transport allowance: $250

Variable shift allowance: Up to $700

Description:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties.
• Complete all documentation including Record of Manual Operation (RMO), Cleaning Instruction (CI), Manufacturing Instruction (MI) according with GMP and GDP standards.

Requirements:

• Min. NITEC / Diploma in Chemical Engineering / Chemical Process Technology
• No exp needed, training provided
• Able to start immediate / in short notice

If you meet the requirements of this role, please email a detailed resume to [email protected] or telegram @alexgohhl

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Responsibilities:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Requirements:

• Min Nitec in Chemical Process/diploma in Chemical Technology

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

• MNC (Manufacturing) - Cable & Connection Technology

• Working Hours: Monday - Friday: 8.30am - 5.30pm

• Working location at Tuas

• AWS + Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing process elements.
• Create Bill of Materials structure.
• Create manufacturing Work Instructions and other process documents in collaboration with the Program Management, Production and Quality Assurance Teams.
• Carry out time studies and update the process cycle times.
• Provide timely technical support to the Production Team pertaining to manufacturing process and quality issues.
• Engage in DFM and Lean Line Design activities.
• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.
• Actively and continuously improve the work processes to improve work efficiency and quality.
• Work with Program Management, Production, and Quality Assurance Teams to identify potential process risks and make recommendations to mitigate these risks.
• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Requirement

• Diploma in Electrical, Mechanical/Mechatronics, Manufacturing/Production, Industrial Engineering or relevant discipline
• 2 - 3 years of relevant experience in manufacturing process engineering
• Possess experienced in the creation Bill of Materials structures will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $2200 - $2500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Working Location: Jurong Island (Transport Provided)

Job Responsibilities:

• Responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations
• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement
• Any other duties as assigned

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Summary

Our client is global leader in the biopharmaceutical industry, dedicated to providing access to innovative medicines, vaccines, and healthcare solutions that improve lives worldwide. Join us in making breakthroughs that change the lives of patients and their families.

Job Scope

• Manual work such as lifting, carrying, shifting, transferring of materials/chemicals.
• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties.

Qualifications and Skills

• Nitec / Diploma in Chemical or related fields
• Internship in Chemical / Pharmaceutical

How to apply

If you are interested in exploring this role or other current openings in the market, kindly email me at [email protected] with your resume.

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

• MNC Company
• Basic $2200 - $2500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Working Location: Jurong Island (Transport Provided)

Job Responsibilities:

• Responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations
• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement
• Any other duties as assigned

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Basic Salary: $6,000 to $8,000 Basic + $1,000 Transport allowance + Mobile + Sales Commission

• Possess sales experience in SEMICONDUCTOR FRONT END PROCESS

Our client is a Europe MNC & a global leader of instrumentation equipment in the semiconductor industry.

Responsibilities:

• Manage & grow client base from MNC to SME
• Achieving or exceed sales & revenue targets
• Support, perform & coordinate instrument demo to clients
• Manage complex sales with ability to sell across different levels within accounts

Requirement:

• Diploma or Degree
• Possess Sales experience in Semiconductor Front End process
• Proficient in Chinese to coordinator with Chinese speaking clients

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

We are hiring a Contract Process Technician to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Responsibilities

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties.

Requirements

• Minimum Diploma/NITEC in Chemical Engineering or related fields preferred.
• Immediate commitment preferred.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

Responsibilities:

• Perform servicing, troubleshooting, and repairs of equipments
• Provide technical support to the Sales team for applications and installations.
• Conduct on-site inspections, preventive maintenance, and draft service reports.
• Assist with equipment checks, goods receiving, and project site work as needed.

Requirements:

• Diploma in Mechanical/Electrical Engineering or relevant.
• At least 1 year experience in water treatment or similar industries.
• Able to work in a team

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to submit your application or send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is a leading global company in semiconductor and FPD production equipment.

Role: Assistant Process Engineer

Duration: 1 year (extendable and convertible)

Working Location: Woodlands (Client Site)

Working Hours: Monday – Friday @ 9am – 6pm

Salary: Up to $2.6k + bonus upon completion

Responsibilities:

- Process checks of machines.

- Day-to-day line support execution for data collection, wafers’ preparation and measurements.

- Recipe creation, troubleshooting and data analysis.

- Monitor and maintenance of process’ stability.

- Reporting and highlighting of any escalation of tools’ issues to the process team and work closely with them to resolve tools’ performance issues.

- Liaising with customers and internal team on daily updates on the process’ status.

- Other duties as assigned.

Requirements:

- Diploma in Electrical/Electronic/Mechanical/Mechatronics Engineering or its equivalent

- A meticulous, organized and resourceful team player.

- A highly motivated individual who works independently with little supervision.

- Work in cleanroom environment.

- Required to work after office hours or during weekend/public holiday.

We regret to inform that only shortlisted candidates will be notified.

Interested candidate, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/10135

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

About the role
As Process Engineer, you will be responsible for driving continuous improvements and enhancing the efficiency of manufacturing processes. This contract role is based in the Boon Lay West Region and offers a competitive salary of up to $4100.

Job Descriptions:

• Assist Engineering Department during development phase
• Design tooling and gauges during product development phase
• Draft out process sheet and “P” Chart for production use
• Assist plant during trial run and conduct process capability study with QC staff
• Conduct OJT for production staff
• Adhere to good housekeeping practice at all times
• Adhere to safety regulations
• Ad hoc task given by Managers

Job Requirements:

• Diploma / Degree in Mechanical Engineering
• Able to troubleshoot problem during trial run
• Possess in basic CNC Machine skill, application of the type cutting tools and basic knowledge of CNC programming
• Ability to work as a team
• Keen interest in outdoors testing
• Basic skill of Cad system

If you are interested, please submit your application here.

Thank you for your application and we regret that only shortlisted candidates will be notified.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to P-Serv Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.p-serv.com.sg/priv.... You acknowledge that you have read, understood, and agree with the Privacy Policy.”

P-Serv Pte Ltd

EA License No: 90C3494

Sharmila Damodharan | EA Personnel: R22107764

You may also reach me at 9777 6201 for further information.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492