Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Responsibilities:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Requirements:

• Min Nitec in Chemical Process/diploma in Chemical Technology

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Location: Tuas

Shift Pattern: 2-2-3 (8am-8pm/8pm-8am)

Transport Pick Up: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun

JOB SCOPE

• Be physically fit for manual work such as lifting, carrying, shifting, transferring of materials/chemicals.
• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties

Requirements

• Diploma/ Nitec in Chemical or related fields
• Team player and able to work indepedently
• Able to work immediately/ at short notice

Interested candidates please send your updated resume in MS Word Format to:

[email protected]

Subject: Contract Process Technician

or call 6736 3280 and ask for Kate

EA Personnel: Kate Leau Wei Xuan (R1552331)

Company Registration No.: 99C4599

Jobscope:

• Monitor and control plant production activities.
• Undertake minor maintenance and prepare process equipment for major maintenance.
• Complete in-process quality control lab tests.
• Ensure that all products are manufactured, handled, stored, packaged and delivered in accordance with documented procedures.
• Comply with the Plant’s Environmental, Health, Safety and Quality (EHSQ) guidelines.
• Work in a team environment and interact with Production, Materials, and Technical teams to resolve problems.
• Suggest ways to reduce production costs eliminate bottlenecks, improve quality and capacity.

Requirements:

• Diploma or NITEC in Chemical Process Technology or related discipline
• Minimum 2 – 5 years of operational experience in a plant environment
• Conversant in MS Office and Distributed Control System (DCS) is an advantage
• Good interpersonal and communication skills
• Able to work well in a team.
• Willing to work on 12-hours rotating shift
• Candidates with no prior experience may be considered

To apply, please visit www.gmprecruit.com

To learn more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R11092398

Responsibilities:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

Requirements:

• Min Nitec in Chemical Process/diploma in Chemical Technology

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Kailey Lee Jia Yueh

EA Personnel No: R24126040

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Globally ranked among top research and technology organizations in the environment and water domain, the NTU’s Nanyang Environment and Water Research Institute (NEWRI) ecosystem interacts across a multi- and inter- disciplinary platform of” Research – engineering – Development ‘(RED) activities in its approach to developing innovative solutions.

We are looking for a Research Fellow to lead a project titled Closed-Loop Advanced Manufacturing Process (c-LAMP) under NTU. The role will focus on developing a modularized and energy-efficient treatment process, ie. electrochemical-biological hybrid process to treat secondary waste, ie. wastewater from swarf cleaning, with the purpose of effective water reuse, forming a circular pre-treatment loop for the manufacturing process.

Key Responsibilities:

• Profiling and understanding the type of incoming wastewater
• Tailoring the treatment system to water reuse requirements
• Modularizing treatment units for applications of different wastewater from different industries

Job Requirements:

• PhD degree in Environmental Engineering, Chemical Engineering or related field
• At least 1 year of relevant experiences in similar role / technical hands-on experience in Bioprocess and/or Electrochemical process
• Familiarity with reactor operation and process design
• Good written and oral communication skills
• Competent in building rapport and influence stakeholders at all levels, ability to work collaboratively in a fast-paced environment
• Possesses international experience, with a strong network of contacts in the region

We regret to inform that only shortlisted candidates will be notified.

Company : MNC in petrochemical and plastic manufacturing

Working Hour / Location : 8.00am to 8.00pm and 8.00pm to 8.00am (rotating 12 hrs shift) / Jurong Island (transport provided to and fro at Jurong East Mrt)

Remunerations : Up to $2,200 basic + $350 mthly allowance + $650 shift allowance + OT Claim + yearly increment + 13 mths Aws + 2 times Bonus payout yearly + permanent staff benefit

Responsibilities:

• Handle daily operational tasks and participate in plant troubleshooting
• Perform field logging, routine sampling and plant testing work
• Prepare process equipment for mechanical work according to SOP procedures
• Carry out loading/unloading and raw material charging activities
• Operates utility and process plant

Requirements:

• Diploma, Nitec in Chemical/ Chemical Process Technology or any Engineering discipline
• 2 to 3 years working experience in an oil/gas/ petrochemical related industry added advantage
• 2nd Grade Steam Engineer / Boiler Attendance Certificate or knowledge
• Able to perform field and panel works, 12 hours rotating shift duties (Day and Night shift - 8.00am to 8.00pm and 8.00pm to 8.00am)
• High awareness of job safety and housekeeping

JOB ID : QXX5W6YY

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building Singapore 049705

DID: 6950 9725

http://www.peopleprofilers.com

Georgez Josiah LIM

License Number: 02C4944

Registration Number : R1108994

Please be informed that the personal data you provided by way of your job application to People Profilers will be collected, used and disclosed by or on behalf of People Profilers to determine or investigate your suitability, eligibility or qualifications for employment with People Profilers and/or its Clients and manage your application for employment with People Profilers and/or its clients, including identifying you as a potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Job responsibilities:

· Develop and innovate critical photonics/flat optics modules. Drive multi-functional teams to optimize existing process flows and develop new innovative integration solutions to meet potential product requirements and manufacturability.

· Develop or redefine critical criteria/aspects for optimal design performances and process capability. Initiate DOE (Design of Experiments) evaluations to characterize process window for new design/product requirements

• Pro-active in evaluating and implementing new integration schemes. Establish proof of concept for future tech roadmap.
• Take on an active attitude to summarize complex problems, explain actions taken to address them with clarity, and align with unit process, design and fabrication teams.
• Extract and analyse inline, GDS layout, parametric, reliability, and other critical metrics to construct predictive modelling on the photonics/flat optics device performance and specification.
• Coordinate activities with multi-functional teams to ensure timely wafers handling to meet deadline requirements.
• Require certain amount of working time in research fab environment for experiment and data collection.
• Act as subject matter expert for both internal and external stakeholders. Potential opportunities to work on customer product delivery.

Job requirements:

• MS or PhD in Electrical Engineering preferably specialized in semiconductor photonics/ electronics physics or engineering. Prior photonics/flat optics technology development are highly preferred.
• Minimum of 3 years of experience in the semiconductor industry/research within the areas of silicon, photonics/flat optics process integration and yield.
• MS/PhD candidates with strong hand-on knowledge of semiconductor unit process, photonics/flat optics device physics engineering will be considered too.
• Working knowledge of photonics simulation, layout design, and DOE design concept are highly desirable.
• Ability to develop a strong understanding on photonics/flat optics device and its related module on current Silicon technologies, related structural and electrical fail mechanisms.
• Passionate about photonics/flat optics technology and innovation. Self-motivated, high-curiosity, good communication and interpersonal skill with proven ability to work in a fast-paced and dynamic environment.

Job responsibilities:

· Develop and innovate critical photonics/flat optics modules. Drive multi-functional teams to optimize existing process flows and develop new innovative integration solutions to meet potential product requirements and manufacturability.

· Develop or redefine critical criteria/aspects for optimal design performances and process capability. Initiate DOE (Design of Experiments) evaluations to characterize process window for new design/product requirements

• Pro-active in evaluating and implementing new integration schemes. Establish proof of concept for future tech roadmap.
• Take on an active attitude to summarize complex problems, explain actions taken to address them with clarity, and align with unit process, design and fabrication teams.
• Extract and analyse inline, GDS layout, parametric, reliability, and other critical metrics to construct predictive modelling on the photonics/flat optics device performance and specification.
• Coordinate activities with multi-functional teams to ensure timely wafers handling to meet deadline requirements.
• Require certain amount of working time in research fab environment for experiment and data collection.
• Act as subject matter expert for both internal and external stakeholders. Potential opportunities to work on customer product delivery.

Job requirements:

• MS or PhD in Electrical Engineering preferably specialized in semiconductor photonics/ electronics physics or engineering. Prior photonics/flat optics technology development are highly preferred.
• Minimum of 3 years of experience in the semiconductor industry/research within the areas of silicon, photonics/flat optics process integration and yield.
• MS/PhD candidates with strong hand-on knowledge of semiconductor unit process, photonics/flat optics device physics engineering will be considered too.
• Working knowledge of photonics simulation, layout design, and DOE design concept are highly desirable.
• Ability to develop a strong understanding on photonics/flat optics device and its related module on current Silicon technologies, related structural and electrical fail mechanisms.
• Passionate about photonics/flat optics technology and innovation. Self-motivated, high-curiosity, good communication and interpersonal skill with proven ability to work in a fast-paced and dynamic environment.

My client is looking for qualified candidates with specialised and deep technical skills acquired through extensive industry experience. Pending experience, the candidate can apply for an Assistant/Manager, Senior or a Lead Professional Officer role.

The successful candidates will be part of their pool of academic staff under the Professional Officers (PO) scheme. They form the talent pool which brings a much-needed industry perspective to student learning. They facilitate applied learning and applied research in the institution, complementing the academic expertise of the faculty to bring industry practices and applications into the curriculum.

Professional Officers leverage on their industry experiences to create authentic learning environments, where discovery and innovation take place. They act as coaches and mentors to students during practical learning activities such as laboratory sessions, Capstone Projects and the work study programme. Professional Officers could also lead or work with faculty on industry innovation projects to provide solutions to the industry.

In addition to their role in applied learning and applied research, Professional Officers manage the centralised laboratory facilities and resources in the institution. With Technical Officers, laboratory safety professionals, and administrators in department, they jointly develop central policies and processes for the safe and seamless operation of laboratories in the institution.

Key Responsibilities

• Design and teach labs & practice modules.
• Mentor students in Capstone Projects and internship programmes.
• Lead or co-lead innovation projects with industry.
• Manage labs and equipment to support academic programmes and applied research.
• Ensure safety in labs.

Job Requirements

• A good degree in Chemical Engineering or a related field. Masters, PhD and/or relevant professional certifications would be advantageous.
• Track record in project leadership and impactful industry experience in Chemical Process Technology.
• Deep technical specialist with 10 or more years of working experience in unit operations (e.g. Heat Exchanger, Distillation Column, Reactors, Cooling Tower etc).
• Practical knowledge of Quality Management Systems and Engineering standards including but not limited to ISO9001, OSHA and BSI etc.
• Practiced in Chemical Process Design software (for e.g. HYSYS)
• Proficiency in analytical techniques such as HPLC, GC-MS, LC-MS, ICP-OES, ICP-MS, and related methods, with a focus on biopharmaceutical analysis would be an advantage.
• Strong supervisory skills and enjoy working closely with students in an educational environment.

Interested candidates are invited to submit their MS Word formatted CV with the current and expected salary remunerations.

• JonDavidson Pte Ltd • EA Lic-22S1412 • MOM Reg No-R1440770 •

We are hiring 1 YEAR Contract Process Technicians to be outsourced to our client from renowned pharmaceutical instituitions/companies!

Responsibilities:

• Manual work such as lifting, carrying, shifting, transferring of materials/chemicals.

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.

• Ensure proper communication and handling over of shift duties

Requirements:

· Min. Nitec / Diploma Chemical or related fields

· Proficient in MS Office will be an advantage

· Prior experience in healthcare industry will be a plus

Apply now by sending your resume to [email protected]!

We regret to inform you that only shortlisted candidates will be notified.

Jesslyn Khoo | Outsourcing Team | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NiTEC or Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Senior Process Engineer, APM (URGENT/ Pharma/ API Technology)

Location: Tuas

Up to $8,000 depending on experience

Industry: Pharmaceutical

IMMEDIATE VACANCY

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Job Summary:

• Supporting the technical department and operations team on process technology and developing science driven solution.

Responsibilities:

Production monitoring/ Process improvement:

• Ensure that key attributes of the process (performance, CPP, CQA) to reduce variability are monitored and initiate/lead and implement process optimization ideas with the view towards improving efficiency, quality, robustness, yield and cost savings.
• Review continued process verification trends (CPP, CQA, & Yield), identify improvement levers and identify/ prioritize and plan process robustness initiatives including aligning with the Continuous Improvement (CI) Specialist , QA specialist and MSAT.
• Participate in CI meetings and yield meetings and lead in some Quick-Wins/ CI projects/ actions.
• Execute or support CI projects related to process robustness issues
• Lead for Process Validation, Process Performance Qualification and qualification of associated equipment by planning the activities and oversee the progress of the qualification.
• Lead/ Implement new product introduction and improvement strategies such as PAT technology and yields program.
• Lead the root cause analysis for process robustness deviations (Eg. DMAIC), propose and implement the CAPA in deviation reports. Actively link with other troubleshooting functions including PCU QA Specialist and PCU Asset Care Specialist in Technical department.
• Engage and work with people from multiple disciplinary functions for the change control, root cause analysis and other discussions.
• Perform technical and quality impact assessment for the new CI projects, plant modifications, process changes to ensure all modifications to plant, process and any risks have been reviewed and assessed appropriately from a process engineering viewpoint to ensure no unintended negative impact.
• Prepare and update batch record sheet, cleaning record sheet, SOP, qualification protocols and reports.
• Prepare and implement cleaning validation, process risk assessment using FMEA methodology.
• Prepare and conduct process training for operations team. Train and provide guidance to the junior engineers/chemists.
• Lead technology transfer project of new or existing chemical process to/from other sites when necessary.
• Participate in safety reviews/audits on plant, process and equipment. Ensure safe working in all areas of work by practicing and communicating safety.
• Participate in HAZOP and process safety analysis.
• Ensure compliance with HSE, Quality policies, cGMP requirements and defined procedures.

Requirements:

• Degree in Chemical Engineering.
• Knowledge of process engineering, hands on experience on API technology, plant operations, continued process verification, PAT and process control/automated systems.

Lim Pey Chyi - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492