JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

To assist in the daily production operation, ensuring schedules of customer is met.

Create and develop quality reports based on drawings

Maintain measuring instruments calibration list.

Liaising with customers and suppliers

Fresh graduates are welcome to apply

Willing to learn and explore

Friendly environment

Engineering graduates prefer but open to others Diploma/ITE also

Versatile to different roles in the company

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· Min. 3 years relevant semicon/ manufacturing experience

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

The candidate need to work in construction site and need to have construction site work experience. candidate must work shift work and long hours till complete the concrete work task. co -ordination with clients and supervisor and company executives. need to know how to estimate quantity for the concrete volume and steel and form work materials requirements.

• Co-ordinate, program and monitor site work, material and workforce
• Attend site meeting and resolve technical issue with main contractor or consultant
• Implementation of Cost, Quality, Productivity, Safety and Health control on site
• Ensure procedures, standards and guidelines are followed and maintained
• Able to produce working and As-built drawing including O&M manual

Provide technical expertise, improvement recommendations and guidance in support of the manufacturing process. Work to improve the performance and efficiency of existing machine. Plan projects or subtasks that may be tracked and presented.

Responsibilities :

• Gather, analyse and summaries production process data for their use in valuing and prioritising process continuous improvement opportunities; utilise continuous improvement methodologies to lead, implement, and track improvements and to conduct check and adjust activities with the objective to reduce wastes while striving for efficiency and profitability.

• Work with cross-functional personnel to analyse and solve production flow issues stemming from sequence of work, balance of tasks, tooling/equipment constraints, and manpower allocation/training.

• Analyse and makes recommendations regarding production facility arrangements for improvements to production capacity, manufacturing flow, new model incorporation, and strategic work transitions.

• Identify, justify and implement new technology and manufacturing techniques to improve safety/ergonomics, reduce manufacturing cost (Labour, material, inventory, scrap) and improve product/process quality.

• To develop and implement an Energy program to prevent waste/reduce utility consumption.

• Support the needs of the plant by participating in all strategic initiatives.

• Control of Bill of Materials (BoM), CAD Models and Engineering Drawings.

• Participate in overseas project management team by the provision of engineering and technical expertise in the design and installation of new plant design and production lines. This includes the designing, installing/constructing and commission new production plant, monitoring development.

• Develop, implement and manages all maintenance procedures to ensure all engineering and maintenance goals are met.

• Ensure the Maintenance Department supports the needs of production and keeps all production equipment in proper working condition.

• Write reports and present progress at project meetings.

• Ensure plant equipment and processes are in compliance with all regulatory requirements including WSH, environmental, health and emissions.

• Responsible for completing technical work assignments with direction and Supervision.

• Responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring.

• Responsible for following and enforcing procedures outlined in the HACCP & Quality Plan under the ISO & ISO Management Systems.

• Perform other related duties as assigned by superior.

Requirements :

· Diploma in any Engineering / Project Management related discipline.

- Fresh Graduates are welcome.

· Proactive team player and technically motivated to solve problems, innovate and deliver to internal and external customers.

· Possess strong written and communication skills.

Job Highlights:

• company transport provided
• Meal provided

Candidates are expected to:-

• Participate in the general planning of maintenance and operations onboard vessel;
• Control the detailed implementation of the general plans in appropriate areas;
• Plan the activities of immediate subordinates and officers under his/her charge;
• Serve as a member of the Management Team onboard vessel;
• Implement safety policies and practices onboard vessels according to the QHSSE policies as defined;
• Perform the role of the Training Officer for any Engineer Cadets/Ratings;
• Deputise for the Chief Engineer when necessary; and
• Appraise the performance of immediate subordinates and Cadets and report to Chief Engineer.

The ideal candidate must:-

• Possess a Certificate of Competency (Marine Engineer Officer Class II); and
• Possess at least 3 years of experience as a Second Engineer Officer onboard a container vessel.

Job Description:

• Develop and maintain Android applications.
• Collaborate with designers and backend developers to implement features.
• Write clean, maintainable, and efficient code following Android best practices.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for performance and reliability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in Android development.
• Proficiency in Kotlin and/or Java for Android development.
• Familiarity with Android SDK, Jetpack components, and design patterns.
• Knowledge of RESTful APIs and third-party libraries.
• Strong problem-solving skills and attention to detail.

You will be responsible for bringing process automation solution to our customers and show them how our products can simplify and integrate complex systems for higher productivity.

Responsibilities & Duties

· Identify and develop potential new customers

· Provide support and further develop existing customers.

· Marketing, promoting and selling of products.

· Provide advice on best solution and product to customers.

· Analyse competitors and market trend.

· Prepare quotations.

· Meeting of sales target and plan.

· Perform other duties as assigned.

Requirements & Skills

· Minimum Diploma in electrical / engineering.

· Experience in Semicon / PCBA will be an added advantage.

· Fresh graduates are welcome.

· Strong communication and sales skill.

· Team player.

We offer

· A friendly and informal working environment.

· A continuous process for learning, development, and career growth.

· Professional and motivated team members.

· Competitive remuneration package.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Site Engineer – Mechanical maintenance

We need an independent, self-motivated site engineer for facilities construction projects with the follow qualification and experience.

1. Bachelor degree / Diploma in Mechanical engineering

2. Should have worked in a Facilities project for Semiconductor or Pharmaceutical or Chemical plants

3. Four to five years site experience is required.

4. Work experience in the plant modification or new built in the above industry is preferred.

Responsibilities:

• Able to plan, execute, monitor, control and manage project works that are assigned.
• Manage or work with operations teams including engineers, supervisors, and workers to complete the entire project scope.
• Preparation of documentation including but not limited to risk assessment, project status report, method statement, work procedure for the project, quality control, etc.
• Cost control of the materials and labour.
• Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, sub-contractors; to ensure smooth, timely and successful completion of the project.
• Attend site meetings, inspections, safety meetings, etc.
• Ensure that all the construction safety rules and regulations are being observed.

Requirements:

• Must possess at least a Degree in Engineering (Civil) and is familiar with the British, American Design Standards, and Eurocodes.
• Must possess good communication skills (Written and Verbal).
• Have excellent problem-solving abilities and interpersonal relationship skills.
• Good team player and customer-focused, able to work with all levels on site.
• Able to work independently under pressure with minimum supervision.
• Only candidates with degrees recognised by the Ministry of Manpower, Singapore need to apply.

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Responsibilities:

• System and network setup, deploy and maintenance support for projects
• Provide technical proposals and deliver with quality standards and deadlines
• Provide technical guidance and expertise to the team, assisting with problem-solving and decision-making
• Participate and support cybersecurity risk assessment, hardening and VAPT
• Setup and conduct UAT test for system, storage, switches, router and firewall
• Perform system and network hardening, VAPT test and provide solutions to VAPT

Prerequisites:

• Degree in Information Technology, Computer Science or relevant disciplines
• Familiar and hands-on experience in design, setup, harden and deploy Windows/Linux OS, Storage and MSSQL server
• Familiar and hands-on experience in design, setup, harden and deploy Huawei/Cisco switches, router, FortiGate Firewall, NMS and MFA software
• Prepare system setup, deployment, manual and hardening documentations based on the project requirements
• Proficient in Cybersecurity principles, hardening methodologies, scripting and tools
• Possess CCNA, CISSP, Security+ , CISA certified will be a plus
• Willing to standby and attend projects' system issues during off office hours

Job description of position

• Windows Server configuration and support
• Experience in configuring and troubleshoot Firewalls, Switches, network routing and WiFi Access Point to maximize network efficiency and security
• Maintain and updating network equipment to the latest firmware releases
• Experience in Office365, Teams, OneDrive and SharePoint support.
• Cloud experience in Azure and AWS is advantage.
• End-user, computer and software support
• Knowledge of SD-WAN technology
• Regional countries remote support is required

Minimum qualification & working experience:

• Diploma or Degree with minimum 5 years of server & IT networking support related experience.
• Experience in Firewall and Network Switch configuration.
• Must be a team player

Language proficiency and skill set:

• Prefer with CCNA/CCNP/CCIE/CompTIA Network & Security
• LAN/WAN. TCP/IP Networking, Palo Alto Firewall, Azure/AWS cloud, routing protocol

Job Description:

1. Oversees projects management and implementation;
2. Codify implementation design into documented for end user's record;
3. Conduct training and presentation for team members and end-users;
4. Provide technical testing or support to pre-sales engineer/customer on the network setup;
5. Assist on technical communications with customer/partner, to ensure closure of sales order;
6. Ensuring that the solution can deliver on the customer’s requirements;
7. Work closely with Level 2 support, if case issue is escalated to Level 3;
8. Maintain rapport with customers and competence in managing vendors; and
9. Any other ad-hoc duties assigned.

Job Requirement:

• Degree/Diploma in IT Networking or equivalent
• At least 2 years of work experience in a SI or distributor environment with network security skillset
• Good IT knowledge in OSI 7 Layer, TCP/IP, LAN/WAN technologies and network security
• Ability to work under pressure with minimal supervision
• Excellent in communication and analytical skill
• Experience in network security projects implementation
• Positive working attitude and a good team player
• Willing to work extended office hours and after office hours when needed
• Exposure to security solution such as Firewall, local balancer or endpoint protection will be an added advantage

JOB DESCRIPTION (ROLES AND RESPONSIBILITIES)

• Perform route mapping and navigation testing
• Assists in setting up the servers and other peripherals needed for robot operations
• Execute hardware and system upgrade or modification
• Provide technical support to the Service Team for Tier 3 - Software and System issues whenever necessary
• Conduct training to the Product Operators and Service Team for the newly setup system, equipping them with product operations and basic troubleshooting knowledge
• Coordinates with stakeholders, ensuring effective communication and providing regular progress reports
• Escalate higher level issue whenever necessary
• Prepare and submit relevant Operations documents as needed
• Execute ad hoc tasks on behalf of the Robotics Operations Team as needed

SKILLS AND QUALIFICATIONS

• Diploma, Bachelor’s or Associate’s degree in Mechanical/Electrical/Computer Engineering or other related fields
• Proven relevant work experience of at least 2 years
• Strong background in Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)
• Familiarity in mechanical/electrical hardware installation, setup and troubleshooting
• Familiarity in system/network installation, setup and troubleshooting
• Familiarity in AutoCAD, ElcoCAD and any other design and planning software
• Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage
• Ability to read and interpret mechanical / electrical prints and other related technical documentation
• Strong working knowledge of equipment, tools and components used in the industry
• Proficiency in using computers and basic applications such as MS Word, Excel and Powerpoint
• Ability to work independently and remain professional under pressure
• Ability to clearly communicate with colleagues and end users

ADDITIONAL REQUIREMENT

• Willing to travel locally in a short notice
• Comfortable to work overtime as needed
• Willing to be deployed overseas as needed

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

We are looking for an experienced AI Engineer with solid knowledge and experience in developing AI/ML systems, to accelerate incubation and delivery of new AI/ML based media and business capabilities.

You will be working with other engineers in the team to research, experiment, and build AL/ML models & algorithms utilizing various of data sources. You will be one of the problem solvers who utilises technology to address complex business needs.

The role reports to the AI Products & Solutions Lead and will work closely with other product teams within the digital department.

Responsibilities

• Implement scalable and robust AI/ML systems computing on large volumes of datasets using a variety of open source and proprietary Data Science technologies.
• Implement and integrate system components for service orchestration, scheduling, job status monitoring, model performance monitoring, failure recovery, APIs, and any other components required for a robust and reliable Machine Learning system spanning on-premises and cloud environments.
• Develop and implement data processing jobs and pipelines to provide standard, continuous, and scalable data input for future analytics and modelling needs.
• Write and automate unit, functional, integration and performance tests in a Continuous Integration environment.
• Work closely with stakeholders to ensure high standards of data governance during implementation.

• Bachelor's degree in Computer Science, Computer Engineering or related fields.
• 5+ years of software development experience with 3+ years in developing end-to-end AI/ML applications.
• Excellence in algorithms, data structure, discrete math, and distributed computing.
• Full stack experience in data collection, aggregation, analysis, visualization, and monitoring of AI/ML products (MLOps).
• Experience with basic software development skills, such as agile methodologies, testing, version control, and CI/CD.
• Proficiency in Programming languages (Python, Java, etc).
• Experience with Cloud Infrastructure, Kubernetes, Docker, GPU, TensorFlow, Pytorch & other Opensource AI/ML framework and libraries.
• Experience with SQL and/or NoSQL database.
• Experience working in Media & Entertainment industry is a strong plus.
• Self-directed, ability to work independently and research innovative solutions to technical and business problems.

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

Job Responsibilities:

• Manage Workers and site progress.
• Prepare Waterproofing Safety Risk Assessment (RA), Method of Statement (MOS), and Safe Work Procedure (SWP).
• Draw waterproofing sub-drawing using AutoCAD and MicroStation software.
• Ensure that the waterproofing procedures comply with specifications, quality standards, and requirements.
• Liaise with Authorities and Main-contractors.
• Take site measurements and prepare monthly progress claims and monthly progress reports.
• Ensuring Supervisors & Foremen meet client & regulatory work requirements.
• Ensure that works are carried out according to specifications, drawings, and programmes without compromising on quality and safety.
• Maintain project schedule by monitoring project progress, coordinating activities, and resolving problems.
• Maintain safe & clean working environment by enforcing rules & regulations.
• Lead a team of supervisors to ensure full-time supervision of works on site.

Job Requirements:

• Bachelor's Degree in Civil Engineering or equivalent
• BCSS Certificate
• Proficient in AutoCAD and MicroStation
• Knowledge of Waterproofing works & Technical
• Knowledge of working at Height
• Minimum 1-year experience in waterproofing works
• Applicants with LTA project experience will be an added advantage
• Good oral and written communication skills

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Responsibilities:

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user.
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Role Description

This is a full-time on-site role for a Design Engineer at Firetec (Singapore) Pte Ltd. The Design Engineer will be responsible for designing and developing new products, creating detailed engineering plans, collaborating with cross-functional teams, and ensuring that the engineering meets quality standards.

Qualifications

• Diploma in Business Administration or relevant field
• Proficiency in CAD software, such as AutoCAD
• Strong knowledge of engineering principles and design techniques
• Familiarity with rules, regulations, best practices and performance standards
• Excellent problem-solving skills,attention to details and meeting deadlines
• Effective communication and teamwork abilities
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

Job Responsiblities :

• Responsible for environmental protection, safety and health, radiation protection and other new government announcements or revised laws and regulations.
• Responsible for the planning, reviewing and implementation of occupational safety and health management plan.
• Assist in the investigation of occupational accidents, and be responsible for external notification and declaration.
• Responsible for various environmental safety and health related Management Systems audits and inspections and tracking the gaps and recommendation for improvements.
• Responsible for the planning, reviewing and implementation of GHS, chemical classification management.
• Responsible for the audit of contractors, suppliers and licensed waste disposal companies.
• Responsible for the company's various environmental safety and health related education and training planning and implementation.
• Responsible for ISO 14001, ISO 45001, SS 651 and other management systems operation, maintenance and internal audit, and complete the external audit planning and execution.
• Responsible for the IH and Medical Monitoring program.
• Organize all Fire Drills and CERT related activities.
• Perform ISEP related project plan assigned by the management.

Job Requirements:

• A Degree qualification in a relevant discipline
• Min 2 years of relevant working experience in Semiconductor Environment,.
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure