Duties & Responsibilities:

Principal

• Occasionally establishes and prepares basis of design and/or estimation and design philosophy and requirements prior to execution of electrical detailed engineering works.
• Occasionally performs electrical system studies including value engineering to determine most cost-effective design but still conforms to Client requirements.
• Normally prepares key electrical engineering documents like Key Single Line Diagrams, Conceptual Layouts, Substation Layouts and, system diagrams for Fire Alarm and Communication Systems in accordance with Client and Project requirements to facilitate the execution of electrical detailed engineering works.
• Normally prepares specifications, data sheets, requisitions, technical evaluation reports and vendor data review of major substation electrical equipment in accordance with Client and project requirements and applicable codes and standards.
• Normally establishes estimation basis and prepares technical proposals for proposal projects in accordance with Client requirements and acceptable estimation and engineering practices.
• Normally coordinates with other discipline, vendors and/or sub-contractors to ensure conformity with project and Client requirements.
• Normally acts as KP of medium to large sized standard projects, exceeding 5,000 electrical engineering manhours.
• Perform discipline project control (schedule, BM/BQ & manhour) when assigned as Project Lead Engineer.
• Assists in implementation of Department training programs by functioning as a “trainer” or "mentor".
• Supports major phase of construction work, can assume responsibility as the Electrical Site Superintendent, Electrical QA/QC in charge, and Lead Field Engineer.
• Acts as the home base Lead Support Engineer when the major phase of the project has been shifted to site, such as purchasing of additional major equipment / material, coordinate / expedite vendors for the immediate supply of material exceptions, resolving major engineering conflicts within the approved specifications.
• Participates in site survey/ investigation of existing facilities to clarify feasibility of the design
• Participate in factory acceptance tests of electrical equipment to confirm suitability of equipment and ensure that the equipment is manufactured according to the agreed specifications.
• Performs other functions that may be assigned by superiors.

Competencies / Preferred Skills:

• Proficient in Microsoft Office Skills, AutoCAD and/or Microstation and common electrical calculation software.
• Familiar with local and international electrical codes, standards and regulations.
• Proficient in the design of electrical systems for oil/petroleum/industrial infrastructure industries.
• Familiar with ETAP and e-DPP software.
• Proficient in substation energization work.

Education Qualifications and other Requirements:

• Bachelor’s degree in Electrical Engineering.
• 15 years and above experience in electrical detailed engineering works of Oil & Gas, petrochemical and other related industrial plants, including five (5) or more years in frontend engineering and proposal / estimation works and additional five (5) or more years infield engineering works.

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

Senior Project Engineer

Responsibilities:

• Lead a team of Engineers and Technicians for the execution of I&C System, SCADA, Industrial Automation, BMS system or ELV system
• Work with team to prepare, review, and submit all the related samples, catalogues, method of statement, risk assessments, panel layout details, design/shop drawings, Operational & Maintenance manual, As-built drawings, and etc for consultants and clients review and approval
• Work closely with team to control and monitor the execution of the projects to ensure that the projects meet the planned schedule, quality and cost requirement
• Communicate and coordinate with all the related stakeholders including internal teams, clients and contractors during the execution of the projects
• Manage site installation and site commissioning
• Manage and oversee the Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) in accordance to the clients' requirements
• Troubleshoot and resolve any issue arise during the deployment of the control system
• Prepare and submit the progress claims with all the necessary supporting documents to clients for payment clarification
• Any other duties as assigned by manager

Requirements:

• At least a Degree in Electrical, Electronics or Instrumentation & Control related discipline
• At least 5 years project management working experience related to I&C System, SCADA, Industrial Automation, BMS system or ELV system
• Good knowledge on basic electrical design & control system design philosophy
• Able to work effectively in a multidisciplinary environment
• Possess Class 2 or 3 driving license with own vehicle will be an advantage

Requires software engineering experience, in particular to equipment such as Automatic Guided Vehicle (Car Parking) systems.

Salary $3500.

Five and half (5.5) work days per week.

Fourteen (14) days annual leave.

Medical Leave.

Ability to speak Mandarin will be advantages because needs to converse with our manufacturer's engineers in China/Taiwan.

Need to be able to work independently.

The role of the Principal Engineer is to assist the Head of MRO in planning and supervise MRO engineer. This role also needs to ensure and adherence to safety regulations, industry standards and trade compliance activities is carried out.

Primary Duties:

Reporting to Head of MRO, you will have the following key responsibilities:

• Assist the MRO Head in planning and executing MRO strategies, ensuring all activities align with organizational goals.
• Supervise MRO engineers, providing guidance and support to foster a high-performance culture within the team.
• Coordinate and liaise with customers on any MRO related matters.
• Identify areas for process improvement and implement best practices to enhance operational efficiency and reduce downtime.
• Ensure adherence to safety regulations, industry standards, and organizational policies throughout MRO operations.
• Assist in the development and management of the MRO budget, tracking expenditure and identifying cost-saving opportunities.
• Analyze maintenance metrics and performance indicators to inform decision-making and improve reliability of equipment.
• Liaise with suppliers and service providers to ensure timely availability of parts and services needed for maintenance activities.
• Support the training and development of MRO staff to enhance skills and knowledge in maintenance practices.
• Ensure adherence to all domestic and international trade regulations, including customs laws, export controls, and sanctions.
• Perform regular audits of trade activities and transactions and prepare reports for management and regulatory bodies.
• Oversee the maintenance of accurate and comprehensive records related to trade compliance activities

Key Attributes and Skills:

• Strong leadership and interpersonal skills.
• Excellent analytical and problem-solving Abilities.
• Strong organization skills with the ability to manage multiple priorities.
• Effective communication skills, both written and verbal.

Qualifications and Experience and Requirements:

• Bachelor’s degree in Electronics, Electrical, Mechanical Engineering, or a related field.
• Strong knowledge of international trade regulations, export controls, and customs compliance. (e.g. ITAR) or a related role is an advantage.
• Occasional overseas travelling is required.

Under administrative supervision of the Technology, this position is responsible for the deployment and maintenance of a cloud-based applications infrastructure.

Responsible for deploying, automating, maintaining, troubleshooting and improving the systems that keep the backend infrastructure running smoothly. The role requires you to have hands-on technical experience and a can-do approach towards environment automation / management and continuous improvement.

Job Duties:

• Deploying, automating, maintaining, and managing AWS cloud-based production system, to ensure the availability, performance, scalability and security of productions systems.
• Build, release, and configuration management of production systems.
• Pre-production Acceptance Testing to help assure the quality of our products / services.
• System troubleshooting and problem solving across platform and application domains.
• Suggesting architecture improvements, recommending process improvements.
• Ensuring critical system security using best in class cloud security solutions.
• Evaluate new technology options and vendor products.

Skills and Requirements:

• Bachelor’s degree in computer science or other equivalent technical discipline.
• 1+ years’ experience with using a broad range of AWS technologies (e.g., EC2, RDS, ELB, EBD, S3, VPC, Glacier, IAM, CloudWatch, KMS) to develop and maintain an Amazon AWS based cloud solution, with an emphasis on best practice cloud security
• AWS Certified Solution Architect (Associate) is preferred.
• Conversant with infrastructure definition tools such as Cloud Formation and Terraform
• Experience as a DevOps Engineer in a 24x7 uptime Amazon AWS environment, including automation experience with configuration management tools.
• Scripting Skills: Strong scripting and automation skills.
• Operating Systems: Windows and Linux system administration.
• Monitoring Tools: Experience with system monitoring tools.
• Problem Solving: Ability to analyze and resolve complex infrastructure resource and application deployment issues.
• Experience with other Clouds such as Azure or GCP can be considered.

Note: Proceeding to apply on this job post means you have read, understand and agreed to WPH DATA PROTECTION NOTICE FOR JOB APPLICANTS in the link below.

https://www.wphdigital.com/notices

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Be part of a team of software engineers involved in making one of the world's most advance unmanned surface vessel and future marine technologies. We are a Singapore company with international connections. We are only looking for someone who is interested in being independent, creative and innovative and dare to try. You might also have a love for the seas and enjoy some real outdoor adventure. The job requires hardwork which means self motivation and those who fear this need not apply.

Your qualifications should involve a degree in computer engineering or equivalent but if you can demonstrate programming prowess, we are happy to consider.

We deal mostly in Python language, Java and C++ and we need someone who knows networking, TCP/IP well. Basically a fast learner can pick up these skills in a short time as long as you are willing to work hard for your own future.

We have many exciting projects in the pipeline.

Will you be that person?. Come for an interview and discuss your future now.

Responsibilities:

- Develop new customers besides servicing existing customers.

- Proactively explore business opportunities and expand market share.

- To maintain close working relationships and follow up with key customers to grow new sales.

- Follow up on customer technical inquiries and ensure their requirements are met.

- Generate trends analysis and customer requirements reports.

Requirements:

- Degree in Mechanical / Manufacturing/Mechatronic/Material Science or min 3 - 4 years in Sales & Marketing.

- Ability to interact with customers to build good relationships.

- An independent and aggressive person eager to explore new business areas.

- High self-motivation, pleasant personality with good interpersonal & communication skills.

- Able to work closely as a team.

- Able and willing to travel.

Responsibilities:

• Manage optimum level of operations and maintenance of automation assets and ensure the Automated Storage & Retrieval System (ASRS) is running with zero downtime.
• Work closely with operation managers to manage customers’ expectations, contract deliverables, and project goals for their logistics solutions.
• Proactively identify, propose, and undertake process improvement projects in improving operations performance and drive cost savings initiatives.
• Responsible and accountable for customer's inventory stored in ASRS system by providing ensuring KPIs are met and generates reports as per request.
• Monitor and manages customer KPI, Inventory movements and activities to ensure just in time delivery.
• Work with vendors to diagnose problems and determine corrective solutions.
• Responsible and accountable for inventory control of critical spares parts, ensuring parts availability through early parts purchase.
• Partner with IT team and storage system vendor to troubleshoot system disruptions ensuring prompt recovery.
• Usage of appropriate subcontractors and ensure clearly defined performance requirements
• Provide specialist expertise on overall maintenance of ASRS, robotics and automation to support business operations

Requirements:

• Min Degree in Electrical & Electronic / Mechatronics / Mechanical/ Industrial Engineering.
• Experience in supporting Dematic Multi Shuttle and Swisslog Auto Store is a must.
• 3 to 5 years' relevant experience in maintenance of automation systems for logistics industries.
• 3 to 5 years' relevant experience in end-to-end project implementation for Robotics and Industrial Engineering.
• Excellent communication and stakeholder management skills.
• Ability to read & use Electrical Single Line and Mechanical Drawings is preferred.
• Knowledge in using AutoCAD and simulation software is preferred but not essential.
• Experience and strong knowledge in Material handling systems, Equipment and Programs with hands on in Programmable Logic Controller (PLC) and other systems is preferred.
• Experience in warehouse management system, warehouse control system ( SynQ and Dematic) and warehouse execution system.
• Experience in warehouse operations ( Inbound /Outbound / Inventory) is preferred.

At DHL Supply Chain we take pride in our commitment to fostering a workplace that celebrates diversity and promotes inclusion for all. We believe that the diverse backgrounds, perspectives, and experiences of our employees are integral to our success. Our inclusive culture is built on the principles of equality, respect, and belonging, where every team member is valued and empowered.
We actively encourage individuals from all walks of life, regardless of age, race, gender, sexual orientation, religion, nationality, disability, or any other characteristic, to apply for positions with us. We are dedicated to providing equal opportunities, removing barriers, and creating an environment where everyone feels they truly belong.

Job Descriptions:

• Overseeing and directing construction projects from conception to completion
• In-depth reviewing of projects to schedule deliverables and cost estimation
• Ensure safety procedures are implemented and meet company’s standard and legislation
• Ensure safety and health are in place according to building and safety regulations
• Monitor, control, and coordinate site works
• Ensure projects meet customer’s quality standards
• Any d-hoc duties as require

Requirements:

• Degree in Civil Engineering or equivalent with at least 3 years relevant experiences at or equivalent managerial level in construction
• Knowledge in Design and Auto Cad (3D) for Civil Structure work.
• Good communication skills
• Able to communicate in English and Japanese language (to handle queries and feedback from Japanese speaking associates/ clients)

ABOUT Defense and Security

Our coverage spans across an extensive spectrum of fields, encompassing proven solutions in Defence & Military, Security & Surveillance, Intelligence & Big Data, Secure Radio Communications, to Cybersecurity, Network & Infrastructure Security.

We are at the forefront of cutting-edge technology with a rich legacy in excellence and innovations. With the combined expertise of 2100 staff in Singapore, and over 80,000 professionals across 68 countries, Thales Singapore Engineering Team is the key contributor in keeping Asia-Pacific & the world safe and secure, protecting and changing lives every single step we take.

Along with other departments in Singapore, such as Thales Research & Technology, we engineer state-of-art technological solutions from dreams into reality for the world. If you are ready to make a difference on a global scale, our team is the place for you. Join us today and embark on an extraordinary journey of writing the next chapter of history for a better world.

KEY ACTIVITIES AND RESPONSIBILITIES

As a DevOps Engineer, you are accountable for the following:

· Guarantee the technical solution for infrastructure & deployment

o System architecture & PaaS implementation

o Define and develop the means so that products are correctly and continuously integrated and deployed in development, quality assurance, and production environments, respecting established rules.

o Support delivery teams with automated tools and scripts to provision infrastructure resources (compute, network & storage) in a simple and efficient manner.

· Secure the product operability

o Understand the functional context of the product up to the point of challenging functional decisions

o Guarantees that the product underlying architecture is state of the art.

o Ensures that operational best practices (supervision/monitoring, backups, archives, log management) are implemented.

· Ensure the software team is informed and aware of operational constraints, and if required trains the team on those topics.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· System skillset :

o System Administration basic skillset (services, ssh, user management, …)

· DevOps tooling advanced skillset :

o Extensive working experience (at least 3 years) with Containerization: Docker, Kubernetes and Helm

o Using and administrating GitLab CI/CD

o Developing and maintaining Ansible Playbooks and Modules

o Deploying and setup of CI/CD pipelines (closely work with development team to develop CI/CD pipelines and deploy into private and public cloud)

o Scripting experience in Shell (bash or Python) etc

o Using Jira / Confluence

o Code documentation using Markdown

· Infrastructure as code skillset :

o Automate deployment and configuration using Ansible

o Working knowledge VMware ESX and other virtualization technologies

· Network basics :

o Good working experience with NGINX and HA proxy deployment and configuration

o Familiar with commonly used network commands (e.g. curl, telnet, netstat)

o LAN architecture (CIDR, vLAN, routing, NAT)

o DNS and SSL (internal, external)

· Security :

o Secrets management using various vaults (Gitlab security vaults, Kubernetes secrets)

o SSH administration

Good-to-have Skills:

· System Administration advanced skillset (IPtables, scripting, advanced kernel tuning, ...)

· Experience with Sonarqube and Nexus repository

· Cloud skillset:

o Use Azure CLI

o Automate Azure resources provisioning with Terraform

o Administrate a IaaS tenant (Azure)

o Administrate a PaaS tenant

· Build for the Run:

o Deploy and administrate monitoring and alerting tooling (grafana, prometheus)

o Craft monitoring and alerting thresholds

o Deploy and administrate a log concentration tool (ELK and FluentBit)

o MQTT broker configuration

· Other useful skills:

o General technical architecture methodology understanding (RPO, RTO, SLA, flow matrix, ...)

o Database administration basics (ex : MySQL dump, clustering models, deployment architecture)

o Agile methodology and process understanding and experience

o Development skill with one of the following language: Java, Go, C#

Behaviour:

· Produces Ingenious, astute design, with an open mind

· Excellent communication, presentation and interpersonal skills. Able to fluently communicate with local project team and external stakeholders.

· Collaborative team players preferred

1.Responsible for the coordination and management of the operation and maintenance team, including network/hardware planning management, basic operation and maintenance, database operation and maintenance, application operation and maintenance, operation and maintenance platform, etc.;

2. Establish and improve standardized operation and maintenance systems, processes, management strategies and security strategies to ensure the quality of operation and maintenance;

3. Responsible for the deployment and daily maintenance and management of the company's operation and maintenance systems to ensure the normal operation and emergency response of the operation system;

4. Ensure the safety of operation and maintenance of the department, handle operation and maintenance accidents, optimize various maintenance workflows, and continuously reduce system risks;

5. Responsible for the management of the operation and maintenance team, the improvement of employees' work skills, etc.

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

IT Support Engineer

Responsibilities:

- Installing and configuring computer hardware, software, systems, networks, printers etc

- Responding in a timely manner to service issues and requests

- Providing technical support across customers

- On-site support for IT related issues at customer office

- Performing & maintaining customers’ IT inventory list

- Handling server related issues through the ticket system, escalate to server supplier TAC and follow up accordingly.

- Replace parts for servers like mainboards, CPU, RAM, HDD/SSDs, network linecards / modules, transceivers and cables

Requirements:

- Diploma in Computer Science, Information Technology or related disciplines

- Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community.

- Troubleshooting & Problem-solving skills

- Ability to determine computer problems and to coordinate hardware, software, and/or network solutions.

- Ability to communicate technical guidance and instruction to users on the use of PC and/or mainframe applications and systems.

Capable of working in a fast paced environment

- Knowledge of a wide range of computer systems software, applications, hardware, networking, servers and communications.

- Familiar with data center environment is a PLUS

------------- Send me your resume via WhatsApp ❤

WhatsApp: (https://api.whatsapp.com/send?phone=6592377799)

I regret to share that only shortlisted candidates will be notified. www.dadaconsultants.com EA Registration Number: R22108564

Data provided is for recruitment purposes only Business Registration Number: 201735941W. Licence Number: 18S9037

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

• Knowledge on HVAC fundamentals (chillers, pumps, cooling towers, air handling units)
• Identify, design, and propose energy conservative measures (ECM) on the chilled water system which includes:

1. Instrumentations selection and design on the measurements and verifications (M&V) system (temperature sensors, flow meters, pressure sensors, weather stations, power meters)
2. Centrifugal water pumps energy optimizations strategy
3. Chillers energy optimizations strategy
4. Cooling tower energy optimizations strategy
5. Heat balance substantiating test

• Operating system efficiency (OSE) report preparation
• Documentation of the chiller system optimization design

We prefer full time interns who can commit at least 5 months between January 2025 to July 2025.

Remuneration: Basic + VB

Work location: Alexandra

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built
• documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Strong leadership with problem-solving skills. Strong understanding in structural design is highly advantageous
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Summary:

• Basic up to 4.5k
• Performance bonus
• 5 days work week, 8-5pm
• Location: Pioneer
• MNC company
• Career Advancement
• Proficiency in CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical / Mechatronics Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess class 3 driving license

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Remuneration: Basic & VB + $800 Flexi Dollars + 3 month performance bonus

Work location: Pioneer

Working hours: Mon - Fri, 8:30am - 5:30pm

Job Description:

• Manage daily operation activities in workshop and customer service
• Ensure the performance and reliability of XSQUARE’s fleet of AGVs
• Respond and provide technical guidance to customers regarding operational issues, software updates, general maintenance etc
• Ensure accountability and integrity operational readiness of workshop
• Develop all necessary policies and procedures to ensure the workshop is effectively maintained to ensure maximum efficiency
• Ensure staff are appropriately trained and motivated to carry out their responsibility to the required standards
• Deal openly and promptly with any problems and effectively identify and manage risk as appropriate
• Constantly review and streamline workflow and working conditions in order to achieve labor turnover and efficient operation
• To ensure all works are carried out in accordance with the safety and housekeeping requirements set by the company
• Provide the point of escalation for team for any operational issues
• Act as a bridge between sales, operations & customers
• Write technical report and submit to customer/manufacturer
• Preparation of reports on performance, budget and expenditure
• Plan and achieve financial budget and key performance indicators

Job Requirements:

• At least 3 years above experience in Industrial Robotics (AGV / Forklifts etc.)
• Candidates with experience from Robotics companies: strobo, hope technik, rockwell automation, omron, swisslog, would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

As a Senior Package Design Engineering (PDE) Central Engineering System and Analytics (CESA) Engineer, you will develop integrated solutions to empower Backend Operations to make data-driven and heuristics-based decisions. You will work across Global Operations and sites to improve Cost, Scale, Quality, and Cycle Time by defining and designing data architecture and collaborating with key partners.

Responsibilities

• Yield Enhancement (YE) lots analysisLead YE lot analysis including reconstructing fuse identififaction (FID) for traceability, statistic comparison for different group
  
• Yield modelling / pareto benchmarkingIdentify actionable opportunities from YE lots
  Develop and improve Yield Models for HBM
  Periodically improve models based on actual performance
  
• Best Known Methods (BKM) DeploymentDevelop BKM’s for YE and drive implementation
  Identify/align BKMs and monitor implementation
  Works with different teams in the identification of critical metrics

Requirements:

• PhD/Masters/Bachelors in Statistics, Mathematics, or a related field; advanced degree preferred.
• Minimum of 3 years of experience in semiconductor manufacturing or related fields
• Preferably with experienced in Package Design Engineering and Yield Enhancement
• Strong understanding and knowledge of semiconductor manufacturing processes and technologies.
• Proficiency in statistical/machine learning and statistical techniques skills will be additional advantageous;
• Experience in MRDA will be a plus
• Proven ability to make decisions, multi-task, and solve problems and address root causes.
• Exhibit critical thinking to see opportunities.
• Effective communication skills in verbal/written.
• Self-motivated. Able to work independently with minimal supervision.
• Able to travel as required to support department and company objectives.